Time Machine Backup  fails every time "Backup could not be completed"

I want to do a new Time Machine Backup on my iMac2007 Snow Leopard 10.6.8 fails every time with message  "Backup could not be completed."
Console says "Error 11" Some Files allways can not be copied/saved by Time Machine,  i search an exclude them in TM not to save them, try again, new ones po up every time.
Does anyone know a solution?

One thing which may help.
I had similar issues....a few times.
Have done all the renaming (<8 characters) etc etc as detailed in these forums.
The first time, I erased TC HD and started again. This fixed things for a few days, and then the same issue came back again.
The next time, I simply copied the sparsebundle file (so I had two sparsebundles, one called xxxxxxxx.sparsebundle, and the other called xxxxxxxx copy.sparsebundle (luckily I had room on the HD to do this)). Then I deleted the original sparsebundle, and before I could rename the copy back to the original filename, the image mounted and started backing up....to the sparsebundle with " copy" still in its name.......so I left it be.
A week or so went by, and then I got the same "unable to mount" error message.
Rather than going thru the whole process again, I simply took the " copy" out of the sparesbundle filename, and all was well again.
I continue to get "unable to mount" error messages occasionally, so I simply rename the sparsebundle file (either by adding or removing " copy"), and it seems to resolve the problem, at least for a while.
While not a fix, it seems to be a workaround for me until Apple works out what the issue is, and fixes it.
Hope this helps someone.
P.S. One word of caution. I just had the thought, while writing this, that I have not actually gone into Time Machine to check that previous backups (eg, one hour ago, one week ago, original backup) are there and are able to be accessed, should the need arise. Because the back-ups appeared to be working, I assumed, and assume, they were. Won't be able to check this for a few days as I am on the road.

Similar Messages

  • Why does the message "the last backup could not be completed" appears every time i try to back up my touch?

    Hi, I'm trying to back up my itouch in icloud but every time I try to hit the button backup now a message that says "the last backup could not be completed" appears. I would like to know why does it appears and what can I do to fix it?
    I would be grateful if you answer.

    Try the following steps:
    Plug your iPod Touch to your Mac/PC using USB cable.
    Open iTunes software and choose “backup to this computer” .
    Then you need to do a sysncing.
    Go to iCloud (iPod Touch: Settings > iCloud) and delete all previous backups.
    Then in iTunes, Turn on “backup to iCloud” again.
    On your iOS device, now you are able to backup to iCloud.

  • "Time Machine Backups" could not be unmounted (Disk Utilities)

    Hi there,
    I am having an error message when trying to back up time machine.  Therefore I went to disk utilities and verified disk.. said it needs to be prepared.  When I try to repair time machine, i then get the following message "The disk “Time Machine Backups” could not be unmounted".  I tried again and then it says its been repaired.  so when i tried a backup of time machine i get "time machine error.  unable to complete backup. an error occurred while copying files to the backup volume"
    I have installed "Time machine buddy" and I am getting"error reading system logs"
    I have a mac osx 10.5.8. No antivirus or spotlight running that i know of.
    Any ideas?

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode, see if external Drive can be repaired...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • HT4859 What do I do every time I tap "Back up Now" (through iCloud) it always says "The last backup could not be complete". My iPad is plugged in, locked and connected to wi-fi.  I still have available 11GB storage from 15GB total storage from iCloud.

    What do I do every time I tap "Back up Now" (through iCloud) it always says "The last backup could not be completed". My iPad is plugged in, locked and connected to wi-fi.  I still have available 11GB storage from 15GB total storage from iCloud.

    I'm having exactly the same problem. I have a new iPad, my iCloud account is set up and verified (I wouldn't be logged in and writing this otherwise), auto backups are turned on, but it's never completed a backup. If I manually select 'Backup Now' in iCloud Settings, it times out while estimating time remaining. Strangely, today my iCloud free storage space went from 5G to 4.9G then back to 5G. Annoyingly, I'm now getting reminders that I've never backed it up! The iCloud help I followed from the forum didn't cover this error message.

  • TS3992 I keep getting an error message "the last backup could not be completed" every time I try to backup my iPhone manually.  It's been almost two months since the last successful backup!

    My iPhone 4s will not backup. I've tried repeatedly but keep getting the message "the last backup could not be completed".  It's been nearly two months since the
    last backup.  However, my iPad2 is backing up perfectly.  Any thoughts???????

    Try the following steps:
    Plug your iPod Touch to your Mac/PC using USB cable.
    Open iTunes software and choose “backup to this computer” .
    Then you need to do a sysncing.
    Go to iCloud (iPod Touch: Settings > iCloud) and delete all previous backups.
    Then in iTunes, Turn on “backup to iCloud” again.
    On your iOS device, now you are able to backup to iCloud.

  • TS4036 When I back up my iPad, it says that the last backup could not be completed. I repeat the backup process several times but still receive the same message. What should I do?

    When I back up my iPad, it says that the last backup could not be completed. I repeat the backup process several times but still receive the same message. What do I do?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting iCloud Back Up

  • TS3992 Trying to commence first ever Storage & Backup but it fail and messages "The last backup could not be completed." "Last Backup-Never". Any clues?

    Trying to commence first ever Storage &amp; Backup but it fails and massages "the Last backup could not be completed" "Last Backup - Never".

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

  • HT4910 Why do I get "The last backup could not be completed"  Last backup: 5/4/12 at 11:16 am?

    Why do I get "The last backup could not be completed"  Last backup: 5/4/12 at 11:16 am every time I try to back up my iphone 4s?  I also get a message that my iphone hasn't been backuped in 32 weeks?

    Welcome to the Apple Community.
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

  • When I went to back up my MacBook to an external hard drive, an error message said the backup could not be completed because an error occurred when creating the backup folder.

    I used a backup hard drive for my previous PC, but I have not done a backup on my MacBook yet, which I got this summer. When I hooked it up to my computer, it started the backup fine, and then my computer went to sleep, and so I closed it to let it back up overnight. The next morning I saw that it had been interrupted, and that an error occurred; the backup could not be completed because there was an error in creating the backup folder. I'm not sure what to do now because my data has been erased off of my hard drive now to prepare for the backup on my MacBook, but will I be able to use this hard drive again? Will the error message always come up?  Is there anything I can do to fix it?

    I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
    Mount the TC sparsebundle and verify it using disk utility.
    A5 here. http://pondini.org/TM/Troubleshooting.html
    You might also like to load the widget in Time Machine so you get whatever the full error message is..
    I cannot find any reference to the error code you are getting..
    My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
    Use the manual methods pondini recommends.
    http://pondini.org/TM/FAQ.html
    Q16 17
    Use ethernet only. Turn off wireless so it does not enter the situation.

  • Continue to get error message "backup could not be completed" after purchasing additional storage

    continue to get error message "backup could not be completed" after purchasing additional storage

    Just wanted to update the community on my exciting adventure to fix my ipad;
    I made my way over to the Apple Store here in South Florida and had my appointment with the geniuses. No one could figure this sucker out!  They did every thing they could think of to the ipad without success. Couldn't even tell me what the problem was. All were very nice about it, of course. I was told to wait a day while they contacted the great and powerful central genius(es) but apparently no one was home there since they never responded to the request for help.
    Anyway, I will go back to the Apple Store one more time before I give in to the conclusion that my 3 year old iPad (original) is DOA

  • TS3992 Last backup could not be completed

    I am not able to back up my iPhone. The message says, "The last backup could not be completed." That is it. I've restarted my phone. The storage area says, "iCloud storage details are currently unavailable. Try again later."

    If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test:   Go to...
    Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options.  Turn off all apps from backup and then do a manual backup.  If that doesn't work, then this post will not help.  If the backup works, then go back to the app list and turn some on and try another backup.  If successful, keep repeating these steps.  If it fails at some point, then try to zero in on the one app that seems to make the backup fail.  (I had this problem and found one app failing, probably due to a corrupt data file.)
    This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

  • TS3992 Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting iPhone backup could not be complete th

    Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting the same message " iPhone backup could not be completed" -what dies that mean.?

    Hi,
    I was facing issues with both backup and FB integration after the iOs 6 upgrade.  Before then I did not have any issues with the iCloud backup service, but after a few days, I noticed that it was continually stuck at the Estimating time for the backup and it never progressed.
    As any good techie would, I tackled the most pressing issue first . . . FB integration of course.
    I had read in a separate post about this solution so tried it . . .
    I deleted the original FB app and hard booted the phone.  I then went into settings and entered the data for FB integration.  Seconds later, I received a text message to my phone - already listed and verified in FB with a 6 digit code to re-enter instead of my password.  Seconds later I was verified and then prompted to download the FB app.  All backup and integrated.
    Then I went into the iCloud backup, turned it off . . . and deleted the last backup.  I then re-enabled backup . . . and although I thought I was going to face the same issue, after a few minutes, it moved on from Estimating time . . . to actually backing up.  It is now a small way through the backup and seems to estimate that it will take another two hours to complete.
    A good nights work.  Backup and integration all sewed up.  Good luck.
    Cheers
    Ian

  • I am having problems backing up icloud. the message says, "the last backup could not be completed."  Has anyone had this problem?

    I just purchased more icloud space and I ham having problems backing up icloud on my iphone 5.  The message says,"the last backup could not be completed."  Anyone know why this is happening.

    This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail.  To troubleshoot these, try deleting your last iCloud backup (if you have one) by going to Settings>iCloud>Storage>Manage Storage, tap your device under Backups, then tap Delete Backup and choose Turn Off & Delete at the prompt.  Then go to Settings>iCloud>Backup and turn iCloud Backup back on and try backing up again.
    If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail.  To locate which one, go to Settings>iCloud>Storage>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • TS3992 Why does my iPhone and iPad say "backup could not be completed"?

    Why do I get the message "backup could not be completed after about 5 minutes"?

    Welcome to the Apple Community.
    First check that your device is correctly connected to the wifi/internet (settings > wifi)
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

  • TS3992 The last backup could not be completed. iCloud Help?

    Since 7/9/2012 my iPad has giving me a message that said "The last backup could not be completed". I've had iCloud since it come out. I have never had this problem.

    Welcome to the Apple Community.
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

Maybe you are looking for

  • Re-enable column values in tabular form before submit

    Hi, I am using Apex 4.1. I have a tabular form. I created a dynamic action to disable some of the columns on page load. It works fine and I am able to add new rows. But when I click submit, all the column values are null and it is throwing validation

  • Focus traversal issue on a panel

    Hello Everyone, I am facing a strange issue. I had a panel (BiggerPanel) that has certain text fields, combo boxes and buttons. The tab (focus) order was top to bottom and left to right as it should be. Now I replaced a text field, with a panel (Smal

  • Can I limit the number of words in text fields?

    I am creating a fillable form using Adobe Acrobat XI.  I know how to limit the character count in a text field, but my client would prefer that the field limit the actual number of words.  Is there a way to do this? Thank you! Jeanne

  • Backup/restore repository and catalog

    documentation states that runcat.cmd can be used to put BI into maintenance mode and then xcopy the repository and catalog to back them up.. I have done this.. but If I want to recover from those files, the best way I have found is: use runcat.cmd ag

  • Problem - Deployment of webservice to ias10.1.2

    I'm trying to complete a deployment of webservice from Jdev 10.1.3.1 to ias 10.1.2 The 'test' connection to the application server works good Deployment errors with: Exit status of DCM servlet client: -8 Has anyone comments as to what could be the pr