Time Machine Crash along with death screen
Ever since I did the 10.5.2 update Time Machine crashes, ejects my hard drive, and I keep getting the gray death screen to restart. I turned off Time Machine but my HD keeps getting ejected and still having the restart issue.
I'm running a Mirror face G4 and have NEVER had a problem before, so this is very irritating.
Hi there,
Thanks for your posting - I followed the links in order to try and find out why my disk image may not be working properly.
I backup my MacBook to an internal slave drive on my G4 using Time Machine. It was working fine for a month but has suddenly given me Kernel Panic so from these posts I assume that to mean a corrupt image. I tried running Disk Warrior on the image. It found a HUGE number of errors. Pretty much every file in the volume was repaired for "Extended Attribute". However, unfortunately Disk Warrior gave the following message:
DiskWarrior has successfully built a new directory for the disk named "Backup of JowieBook." The new directory cannot replace the original directory due to a Mac OS services failure.
Try rebuilding again. If this problem persists, please restart from the DiskWarrior CD and then try rebuilding again.
Hmmm, that not good. I haven't tried restarting from the CD because I don't see much point - the image isn't on the boot drive, it's on a slave. I checked the volume read/write status as suggested and this is the result (abridged):
image-path : /Volumes/Lemon Jelly/JowieBook_0016cbcc5f19.sparsebundle
image-type : sparse bundle disk image
writeable : TRUE
autodiskmount : TRUE
removable : TRUE
image-encrypted : false
So I'm pretty stumped. Shall I just run it again? Here's the chmod status of the volume:
drwxr-xr-x 6 jowie jowie 510 Feb 20 22:30 Backup of JowieBook
I'm not very good with Unix but that looks okay to me... So I'm a bit stumped. Any thoughts?
Thanks!
Similar Messages
-
hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.
-
Why does "enter time machine" crash my computer?
The title is pretty descriptive. The "crash" is that I get the spinning beach ball of death and over the course of a few seconds my machine becomes completely non-responsive to input (keystokes stop working, then the wiggling the mouse stops working). I have do hold down the power button to reset the machine after that. Although I'm quite familiar with http://pondini.org/OSX/Home.html I don't see that anything readily addresses "Time Machine crashes my whole OS". Any ideas? Thanks!
Here a log of what happens. I got this same effective log in two different situations: first when I ran an attempted backup, then again basically the same when I changed the computer name and tried again. That second attempt is probably pretty telling since there is no sparsebundle with the new computer name, meaning the error of "diskimagealreadyattached" cannot be true.
Starting standard backup
Attempting to mount network destination URL: afp://[email protected]/timecapsule
Mounted network destination at mountpoint: /Volumes/timecapsule using URL: afp://[email protected]/timecapsule
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Running backup verification
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Backup verification incomplete!
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7faf9305d400 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[email protected]/timecapsule
Mounted network destination at mountpoint: /Volumes/timecapsule using URL: afp://[email protected]/timecapsule
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Running backup verification
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Backup verification incomplete!
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7faf93507310 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[email protected]/timecapsule
Mounted network destination at mountpoint: /Volumes/timecapsule using URL: afp://[email protected]/timecapsule
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Running backup verification
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Backup verification incomplete!
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7faf93060170 {MessageParameters=( -
When I open my MacBook Air the keyboard comes up along with the screen and does not stay still. So I need to hold down the keyboard while i open it. Other than that it works fine despite the fact that the fan noise some times is loud and sometimes it's getting warm at the base. I wonder if this can be fixed if i go to one of the apple branches.
Yes. Take the computer to the Apple store to have it fixed.
Best -
My 27" iMac has just come back from the workshop after having a white screen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB ke
Thanks for your reply! I must apologise for the quality of my post. I inadvertently posted it before it was corrected.
I am very disappointed with this iMac. It is only 18 months old and this will be the third visit to the workshop. I had expected more from Apple and from their repair agents. Luckily I have AppleCare. -
Time Machine crashes using Mac OSX 10.7.5
Past few days, Time Machine crashes when attempting to use the application. This problem just started and had previously worked.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful. -
Time machine crashes finder on restore and I see no record of files.
Time machine crashes the finder on restore and I see no files.
Just tried to resort a single file and it crashes the finder as soon as I try to go down in the different folders. several restarts did solve that bit and after several attempts I get down 2 or 3 levels but there are no files at all.
If I mount the sparse image on my server (I backup to a server with external hard disk over my local network) all the files are there and I can access them. So I have restored the corrupted file I wanted too, but still need to solve this problem.
Any tips?ChangeAgent wrote:
OK. if I go in to the disk that I backup to. I find the disk image of the backup. if I load this I see what is inside.
Again, what do you mean by "load"? If you mean mounting the disk image and using the Finder to copy from the files inside it, that's not "restoring," and isn't recommended, as you will have permissions problems with the copied files.
the folder that refuses to back (all of them on the second level these are tho folders that are the dated folders of the backup) up is the one that is locked, has different permissions as it should have. If I fix the permission of the folders I can see them in the TM backup. however every new backed up folder is locked again and can not be restored till unlocked as described above.
Yes, that's correct. Time Machine tries to keep us mere mortals from shooting ourselves in the foot by messing about with the backups. Once you've manually altered things inside your backups, there's no telling what will (or won't) happen.
Try this: create a new user, and sign on to that account. Make a test folder somewhere inside it's home folder (but not it's desktop) and put some test files in it. Run a backup. Then use the "Star Wars" display to restore that folder to the desktop (an "alternate location.") Does that work? Can you see and change the restored files as that user? Are other users prevented from changing them?
I don't know exactly what's happened, but it appears your backups are badly corrupted. You can try Repairing the sparse bundle (as Mr. Horowitz suggested), per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum, but it's doubtful that will really fix them. Your only option may be to delete the sparse bundle and let Time Machine start fresh. -
Time Machine crashes after clicking Select Drive
I got my MBA 13, 256SSD, i7 last week.
Trying to configure Time Machine to work with my NAS.
The NAS is a Synology DS211j on DSM 3.2 Beta, which supports TM on Mac OS X Lion.
However, before I can even select the NAS, every time I start Time Machine and go to 'Open Time Machine Preferences' - ' Select Disk' , this causes System Preferences to crash. (System Preferences quit unexpectedly.)
It seems to be unrelated to the NAS, as the Time Machine application just stops whenever I try to go into 'Select Disk'. I suspect that for some reason my Time Machine app is broken...
Anyone knows how to fix this?I got my MBA 13, 256SSD, i7 last week.
Trying to configure Time Machine to work with my NAS.
The NAS is a Synology DS211j on DSM 3.2 Beta, which supports TM on Mac OS X Lion.
However, before I can even select the NAS, every time I start Time Machine and go to 'Open Time Machine Preferences' - ' Select Disk' , this causes System Preferences to crash. (System Preferences quit unexpectedly.)
It seems to be unrelated to the NAS, as the Time Machine application just stops whenever I try to go into 'Select Disk'. I suspect that for some reason my Time Machine app is broken...
Anyone knows how to fix this? -
My time machine crashes while backuping. Message is
07.10.12 10:09:41,376 mdworker: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
That runs for hours with no progress in backupOK - try, temporarily, turning Spotlight indexing OFF and then try to run the backup. In Terminal (Applications>Utilities) copy and paste into Terminal:
sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
Then try running the backup. If it works, or even if it doesn't work, enable Spotlight again by copying and pasting into Terminal:
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
Give it a shot - let me know if it works because there have just been too many problems with 10.7.5 and Time Machine.
Clinton -
HT201250 Time Machine comes up with my Finder, not my history. How Come?
Time Machine comes up with my Finder, not my history. How come?
If you aren't using an application that supports the Time Machine interface, Time Machine will show Finder by default (Desktop folder).
That's the screen where you can navigate through your backups to restore files. See “Restoring data from Time Machine backups” > http://support.apple.com/kb/ht1427 -
My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.
shahzadfromlahore wrote:
Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
Who set up the phone? Who's Apple ID was used to activate it? -
Do time machine back up with HD attached to mac, then change HD location?
I want to do my first time machine back up with the HD directly attached to mac (faster) then take that HD and connect it to my Airport Extreme (dual band) 802.11n router for subsequent periodic back ups (as future back ups, unlike the first one, will be far smaller, obviously).
Is that possible?
If not, what else should I do?
Ethernet directly to the router (a pain for my situation, but possible)BreeBrizzle wrote:
I want to do my first time machine back up with the HD directly attached to mac (faster) then take that HD and connect it to my Airport Extreme (dual band) 802.11n router for subsequent periodic back ups (as future back ups, unlike the first one, will be far smaller, obviously).
Welcome to Apple's discussion groups.
Is that possible?
Not without a lot of hassle. Time Machine manages backups on a locally-connected disk completely differently from how it managed backup on a network disk. It's possible to convert between the two schemes, but it's not easy.
If not, what else should I do?
Ethernet directly to the router (a pain for my situation, but possible)
I'd back up to the disk while it's connected to the AirPort Extreme, but connected via Ethernet for the first backup. It might minimize the pain if you do that overnight. -
How to download a module pool program along with its screens ,includes etc
Hello Experts,
How can I download a module pool program along with its screens ,includes etc to my presentatio0n server and then upload it back when needed.
When I searched , I got a program which is satisfying my partial requirement because it only downloads
the module pool program first(ie.just the main program) and then the include needs to be downloaded to the system separately.Screen and statuses wont be downloaded.
Is there a way to download all the objects for the corresponding program store in some format and then upload it back when required.
Please Help.Hello,
Go to the layout of the modulepool to be uploaded or downloaded. choose the menu path utilities->upload/download.
The same file which is downloaded can be used to upload
1.the screen flow logic and
2.layout
Using this you can upload as well as download
Cheers,
Vasanth -
My daughters computer crashed along with her itunes library. She can plug it into my computer so how do we create her account on my computer? When we plug it in, it wants to replace her nano songs with my library.
Not quite surewhat your asking exactly. You look here for different ways on importing media from nano to your computer! https://discussions.apple.com/thread/2417169?start=0&tstart=0
-
Time machine crashes after Yosemite upgrade
I recently upgraded to Yosemite 10.2.2. on a mid-2010 MacBook, but am having problems backing up using TimeMachine.
I can access my past backups, which is good news, although I need to select one of the disks being backed up in the left column of the finder window (if I just select my username it doesn't seem to work). However, when I attempt a backup the computer crashes during the beginning of the backup process ("Processing backup"). I don't get any particular error message when Time Machine crashes, the computer just restarts and sometimes I will get an error message once the computer has finished restarting indicating that the computer restarted because of a problem.
I back up onto a non-Apple (Seagate) connected to the WiFi network drive, which has been working well for about 6 months under the previous OS.
Anyone have any thoughts on this? I've run the disk utility to repair disk permissions, removed the network disk as backup then re-added.And here is the Problem Details and System Configuration in case its helpful:
Anonymous UUID: B73BF844-60BD-9880-938A-BEF0C404EA33
Thu Jan 29 23:20:29 2015
*** Panic Report ***
panic(cpu 1 caller 0xffffff8019735d11): "hfs_UNswap_BTNode: invalid backward link (0x00012299 == 0x00012299)\n"@/SourceCache/xnu/xnu-2782.10.72/bsd/hfs/hfs_endian.c:303
Backtrace (CPU 1), Frame : Return Address
0xffffff8085e63030 : 0xffffff801932fe41
0xffffff8085e630b0 : 0xffffff8019735d11
0xffffff8085e63100 : 0xffffff8019726327
0xffffff8085e63130 : 0xffffff801957b5e5
0xffffff8085e63240 : 0xffffff801957aa5a
0xffffff8085e632f0 : 0xffffff8019578ff4
0xffffff8085e63340 : 0xffffff801975e7b1
0xffffff8085e63370 : 0xffffff8019763cd0
0xffffff8085e63430 : 0xffffff80197429ba
0xffffff8085e63550 : 0xffffff8019570cb6
0xffffff8085e635e0 : 0xffffff80197ac9d8
0xffffff8085e63f50 : 0xffffff801984b386
0xffffff8085e63fb0 : 0xffffff8019436e86
BSD process name corresponding to current thread: mds_stores
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide: 0x0000000019000000
Kernel text base: 0xffffff8019200000
__HIB text base: 0xffffff8019100000
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 3182901727712
last loaded kext at 3016699200744: com.apple.filesystems.afpfs 11.0 (addr 0xffffff7f9bfb2000, size 364544)
last unloaded kext at 338817335836: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f9bf3a000, size 61440)
loaded kexts:
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.filesystems.smbfs 3.0.0
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.15.5
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 269.25
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleLPC 1.7.3
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.GeForceTesla 10.0.0
com.apple.driver.AppleBacklight 170.5.0
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.iokit.SCSITaskUserClient 3.7.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.nvenet 2.0.22
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.driver.AppleMultitouchDriver 262.33.1
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.kext.triggers 1.0
com.apple.driver.AppleBluetoothHIDKeyboard 176.2
com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
com.apple.driver.AppleHIDKeyboard 176.2
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.iokit.IOUSBMassStorageClass 3.7.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.3
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.iokit.IO80211Family 710.55
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBook7,1, BootROM MB71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.60f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032362E4130314C4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032362E4130314C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Ext HDD 1021
USB Device: Built-in iSight
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Maybe you are looking for
-
A Time Capsule, Airport Express and AT&T 2Wire walk into a bar...
Alas, I'm sure this question has been asked before, but my reserach keeps turning up separate answers. So I thought I'd turn to this forum for some advice. Ultimately I'm seeks suggestions on various ways to configure my network to allow easy backu
-
Business Catalog updated with BPEL refs, not with BPMN refs
When adding BPEL processes to the SCA component you see the Business catalog modules "References" and "Services" are updated. However, when adding BPMN processes the Business catalog is not updated (and btw you cannot check "Expose as an web service"
-
Local Class Transaction Code Problem
Hi friends, I have created report program using local class. I have also used selection screen to get input from user. I have created oops transaction code (using se93) for that program. Problem is selection screen is not displayed when progr
-
Diss/Re-assembled Hp Dv6, screen and start button fault
Hi! Before I start I pre-apologize for posting this thread wrong, and possibly bad English.<br><br>I have had my Hp Pavilion Dv6c10ed for a couple of years, and today I tried to clean the fan. Unfortunately I think I failed somewhere, because the pow
-
Uploaded html code is reformatted disabling javascript functionality
I've asked this before but not had a comprehensive resolution. This issue began when I moved from my apple powerpc running OSX 10.5.8 to an imac running 10.7.3 and for the reasons you'll see I'm sure this is connected with mac OS than dreamweaver, bu