Time Machine does not work after installing mavericks

After I installed maverick on my imac, my time machine backups don't work anymore!!!!
I have a normal portable HDD attached to my Imac with time capsule backup from before mavericks was installed.
I also has a Buffalo NAS as a second Time Machine Backup.
TIme capsule does not recognise my Buffalo NAS and tells me that it is not available. It has previous backups from Mountain Lion for sure!
My portable HDD keeps saying "Preparing for backup" for eternity.
Please, APPLE, what is going on with mavericks? Regretted upgrading.
My backup is 31 days behind because of this! Unacceptable!
But what is strange is that I can connect to my portable HDD and Buffalo NAS as a drive. What I have been doing is to copy and paste the important stuff into the drives. But it really defeats the purpose of time machine, right?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Mp600r does not work after installing mavericks 10.9 what do I do now ?

Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

Time Machine does not show after installing Lion?!

I upgraded to Lion and now my Time Machine does not work. When I connect the disk it starts and then shuts down. It does not show neither on desktop or on Time Machine. Any ideas. I hate the thought of reinstalling Snow Leopard but...
Thank you in advance
Matej

No reason to reinstall Snow Leopard.
What's shown on the Time Machine Preferences window for Latest Backup? If it shows "Error" in red, see #C2 in Time Machine - Troubleshooting.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

Call Of Duty LAN Servers does not work after installing Mavericks on my Mac Air, I need help!

Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
Thx!

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Iphoto 9.2.3 does not work after instal Mavericks

I had Snow Leopard on my imac and used iphoto 9.2.3 and i upgrade free totMavericks, version 10.9
After the upgrade to Mavericks iphoto does not working
It is not supported by Mavericks.
How can i get back my program iPhoto ( 9.2.3) in Mavericks?
Thank you for an ( good) answer.

Go to the App Store and upgrade it to the current version.

Printing does not work after installing Mavericks

I am unable to access printers after installing Mavericks on my macbook pro retina. Any suggestions?

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

Time Machine does not work after Lion Upgrade

Hi all.
I upgraded my iMac to Lion yesterday. I used to run Time Machine through my airport extreme to an external hdd.
After the upgrade to Lion I'm unable to do this. When I try to setup Time Machine again, it is not possible to connect to the HDD throught the Airport Extreme. I do find the external HDD in Finder, but not able to access it.
The HDD is a Samsung 1 TB.
Is this a known issue and is it any possible fixes in the near future?
Thanks!

Hi
It probably doesn't help you directly but I have Lion performing time machine backups onto an external disk via airport extreme. Have you upgraded the firmware on the airport extreme recently?
Cheers
Tom

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

Fastdial does not work after installing version 7.0.1

Fastdial does not work after installing version 7.0.1

'''this will fix your problem with FF 7.01 '''
'''http://dl.dropbox.com/u/10199236/fast_dial-3.5.1-fx-modified.xpi '''
'''''This link will fix Fast Dial for Firefox 8.0.1'''''
'''http://dl-web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-fx.xpi '''

Time Machine does not start after external hard drive is connected

Time Machine does not start after external hard drive is connected

These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine.

I have a 2013 macpro I upgraded to yosemite. Now I find time machine does not work, nor my old back up using a click free wireless back up. What is the status of time machine and yosemite?

What is the status of time machine not working with yosemite?
I upgraded mu mac pro to yosemite and since have found time machine does not work.
Also, my old backup via a clikfree wireless backup does not work any longer.
Is anyone working on this issue?
Is there anyway I can backup my information today and until time machine &
yosemite get fixed?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Camera (Skype, FaceTime, iChat) not working after installing Maverick OS

camera (Skype, FaceTime, iChat) not working after installing Maverick OS

kwmaclean wrote:... same problem...
If How to Troubleshoot iSight doesn't help, Reinstall OS X.
Message was edited by: EZ Jim
Mac OSX 10.9

After installing Yosemite Time machine does not work

Time machine no longer works after Yosemite installed. Can this be fixed?

Mine isn't working either. First time I've tried to backup an iMac and it is after 10.10.3 update. It won't complete the backup. File in finder ends in "in progress" - i have tried with two different drives, ran tests on both and on my startup disk. It is a brand new WD 2T My Passport for MAC and basically a brand new iMac (late 2014) - it will NOT complete a backup. I cannot find any answers on the support discussions - how can I get this working? Any help would be GREATLY appreciated - I'm concerned I don't have this machine backed up at all.
Here is what Time Machine is telling me (I tried disk utility on both of the external hard drives I have - and neither had an issue to fix):

Time Machine does not work after installing mavericks

Similar Messages

Maybe you are looking for