Time machine, network, disk addition, JBOD array question.

So here's my setup (future) MBP with 256gb ssd, Macbook with 140gb HDD, MB used as networked storage, preferrably on ubuntu. I have a 500gb HD i use for backups on my MB, and a 750gb hdd i would like to be able to use independantly. I need a solution! I would like to be able to back up to a combo of the 500 and 750 gb hdds, and be able to take the big one out of the setup like on a trip. I have looked into JBOD and RAID 0, both sound iffy. What about RAID 1? is there some software (CCC?) that would allow me to back up the 750gb hd to the 500 one? Thanks ahead for any help!
P.S. I have backups on the 500gb one, so i would have to be able to move them over somehow.

Thanks for your reply.
Jolly Giant wrote:
ChangeAgent wrote:
just copy across? Or?
How can I copy my TM backups to a different location?.
Thanks for the link.
ChangeAgent wrote:
I did not find a forum for Time Machine
Thanks for the tip. I just typed Time Machine and got no results that looked like they would help. Strange logic to me, but I follow.

Similar Messages

Option to encrypt time machine network disks not available

I have two MBP' (Os10.8.4) machines that backup over a network to a MM running 10.6.8 retail.
In TM the box to encrypt the backup is grayed out. I read in Pondini' excellent instructions ( http://pondini.org/TM/31.html ) that it is only available in 10.8. as said, the MBP' are on 10.8.4.
Would this mean that because my MM is running 10.6 it is not available? seems not logic to me, but can someone confirm this or tell me the workaround/fix?
Thanks

It probably has to do with how the encryption software is written in 10.6 OS software. I would go with Pondini's
article.

HT201250 Can I back up with time machine AND store additional files on the same external drive?

I just bought an external drive to move and archive some files off my iMac to free up some space. I'm being asked if I want to use the drive to back up files with Time Machine. Can I use this drive to do both? (Back up with TM AND store other files?
Your input is appreciated.

Technically you can but it is not a very good idea at all. The reason it is a flawed idea is if the HD fails (not really if but when) you will have defeated the whole idea of backup. A failure means you will lose the data files you stored on it and it's backup! A good backup plan has at least 2 forms of backup because backups can fail too. I would strongly recommend getting at least one additional external HD and use it for storing the data files you wanted off the internal HD and use the second for a Time Machine backup drive.
Personally I have 3 external HD's attached to my computer. Disk 1 is my Time Machine backup, Disk 2 is a Bootable Clone of my internal HD and Disk 3 stores my music, photography and movie libraries.
Please read these articles, they will discuss different backup strategies and I think you will see that each suggest redundant backups.
Backup Plan I
Backup Plan II
Backup Plan III

Error Dialogue: "Time Machine Backup Disk Can't be Found"

Hello -
I am trying to "Enter Time Machine" (which is on a Time Capsule); but when I try this, I am met by the error message "Your Time Machine Backup Disk Can't be Found" with the option given to "Set up My Time Machine".
Needless to say, my Time Machine has been set up for months. When I look in the preferences, it clearly shows the disk I'm connected to (here's a screenshot of the error dialogue alongside my Time Machine preferences: http://cl.ly/1HGk).
Any idea what the best course of action is here.
ADDITIONAL NOTE: notice from the screenshot that Time Machine thinks the earliest backup is only 1 day prior. This is also strange as I have said I've had Time Machine working on this Time Capsule for months. I called Apple about this and was told that a software update had gone out yesterday that reformatted the drives and started the backups all over again. While completely fishy - I don't remember agreeing to any software update dialogue about erasing my Time Capsule - I took them at their word. Not sure if this is related, but thought I should mention it.
Thanks Crew!

MattLat wrote:
Hello -
I am trying to "Enter Time Machine" (which is on a Time Capsule); but when I try this, I am met by the error message "Your Time Machine Backup Disk Can't be Found" with the option given to "Set up My Time Machine".
Needless to say, my Time Machine has been set up for months. When I look in the preferences, it clearly shows the disk I'm connected to (here's a screenshot of the error dialogue alongside my Time Machine preferences: http://cl.ly/1HGk).
Any idea what the best course of action is here.
The +sparse bundle+ containing your backups may be corrupted. Repair it, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If that doesn't help, try a "full reset" of Time Machine, per #A4 there.
ADDITIONAL NOTE: notice from the screenshot that Time Machine thinks the earliest backup is only 1 day prior. This is also strange as I have said I've had Time Machine working on this Time Capsule for months. I called Apple about this and was told that a software update had gone out yesterday that reformatted the drives and started the backups all over again.
That's the first I've heard of that. They may have been referring to the +Time Capsule Backup Update 1.0+ update several weeks ago, that some folks got but others didn't. If it finds a problem, it sends the message in this article: http://support.apple.com/kb/HT4076 The existing sparse bundle is renamed and locked, and a new one made.

I need to backup my mails from a time machine backup disk from a powerbook leopard to an IMac snow Leopard...can I do this?

Hi everybody...
I need to backup my complete history of emails. I have a time machine backup disk I used in a powerbook intel, second generation with Leopard OS. Now I have an Imac of 24 inches, with Snow Leopard OS. Can I use that backup disk (TM) to put the mails that used to be in the powerbook into my IMac?
My original powerbook is broken, so I cant do anything there...

You should be able to find and restore emails that were on the old Mac via Time Machine. Emails that were on the server, not the Mac, won't be there, of course.
See the blue box in #15 of Time Machine - Frequently Asked Questions.

Time Machine backup disk changed name to "3-/9=/=87"

I upgraded to Leopard, and attached a LaCie drive, which Time Machine recognized and used as its backup disk. After formatting the drive, the name was changed to Time Machine Backup disk, but now it has changed to 3-/9=/=87. I tested Time Machine to ensure that it is indeed restoring files, and it is. Any ideas on the name change, and if it will affect Time Machine?
Many thanks.

My solution
I found that after trying a few things in the aforementioned thread that in System Preferences > Sharing > Options if I disabled SMB and only enabled AFP on my Mac Pro, which has my Time Machine disk and is accessed over my local network LAN by my Macbook Pro laptop, only then did the Time Machine disk show up in the Time Machine preferences in my remote laptop TM settings.
I suspect my laptop had been connecting to my desktop via SMB instead of AFP and thusly TM would not work.

Time Machine Backups disk not automatically unmounting after backup completes in Lion

I am using Time Machine over WiFi on a 3rd party USB drive shared as an AirDisk through an Airport Extreme router. Ever since switching to Lion (clean install), I have noticed that the Time Machine backup disk will not automatically unmount after a backup is completed. This creates a problem when my MacBook Pro comes back from sleep. Specifically, the WiFi notification icon in the Finder toolbar indicates that WiFi is connected, even though it's not connected to a network, and I am unable to connect to any networks for what seems like several minutes until the Time Machine backups disk disappears from the desktop and WiFi actually connects.
Since the disk was not cleanly unmounted, Time Machine then keeps complaining that the sparse bundle file is locked and cannot be mounted every time it tries to do a backup. I have to either disconnect/reconnect the USB drive physically from the router, or restart the router every time this happens to resolve the issue. That is getting really annoying to have to do every time. I suppose I could manually unmount the Time Machine disk after every backup but it's ridiculous to have to do that every time I want to put the computer to sleep.
Is anyone else experiencing this issue and is there a fix?

For others who might be having this problem - I was able to resolve it by connecting my backup disk to my mac via USB, completely erasing it, and starting over from a new backup. Disk Utility was not reporting any errors when I verified the disk, but I went ahead and repartitioned it and started fresh. The disk now automatically unmounts after backups complete.

HT201250 My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

Inherit a Backup
Inherit a Backup (2)

How do I get back iphone app information from a DELETED Time Machine Backup disk

Hi People,
here is what happened:
I have been using an iPhone App (Audio Memos Free - The Voice Recorder) to record song ideas (I am a songwriter). I have been using it for years.
I backed up my iphone to itunes, and backed up my mac on Time Machine. After a month or so I did a fresh OSX install on my mac, copied all of my files back from Time Machine into my mac, and tried to set up Time Machine. I was not able to do so, so I had to format the Time Machine Backup disk and doing a "fresh" mac Time Machine Backup.
After a week or so, my iphone asks me something like "you do not possess the rights for one or more applications". do not know what i did, but after 1 minute my iPhone was wiped out of all my apps and app contents. I had also the icloud app sync, so i did not worry, recovered from icloud notes, contacts, and all other things. so i did another backup to itunes.
Now i discover icloud did not recover or save the "Audio Memos Free" app content. I know the data are hidden into the Time machine Backup HD, but i do not know where to search for the itunes backup in it.
I know it is in library, but library won't show up.
Any help would be much appreciated.
PS there is a chance that, even without a data recovery, my latest itunes backup was containing these songs, but i do not know how to fish that out of the Time machine drive.
Thank you in advance.

I would email iTunes Customer Service:
http://www.apple.com/support/itunes/store/browser/
CG

Migrating content from an encrypted Time Machine external disk (will not easily work)

I recently purchased an SSHD to upgrade my Mac. I preferred not to completely restore from Time Machine, but rather to install a new copy of Mavericks on the new disk and then migrate my TM content afterwards. At the end of installation, Mavericks proposed the option to migrate data from a TM backup, which I chose.
It turns out that the Migration Assistant did not recognize any disk, perhaps because it was encrypted, nor displayed any way to select the volume and unlock it by entering its password. Despite what Pondini says the Time Machine backups disk was not seen by the Mac: as workaround I had to create a fictitious user, log in, unlock the disk (that was immediately recognized by the system) and then run the Migration Assistant from there (by the way, after 4 hours I finally logged into my migrated account and found out that apps were not imported at all!)
I find all this quite not…applish! I could have preferred to unencrypt the TM disk rather than
Is there anyone facing this same experience? Hope that this, if it's a bug, will be fixed, otherwise I'll have to make a TM backup on a secondary disk (which I don't own so big).

Well a google search would appear that disk utility will show you the disk regardless if it's mounted or unmounted. you're best bet would be to unmount the disk in finder, shut down the computer completely, unplug it from a power source, and then unplug the firewire...
I think this is your safest bet but then again, I'm not that worried about ejecting my disks.
you get no error messages when you right click and eject the disk in in disk utilty? you said you have a my disk, do you mean My Book by western digital? I know that they load software onto the machine for encryption purposes. have you tried ejecting the disk from there? I uninstalled said software so I can't tell you if there is an option for that or not.

Restored system from Time Machine backup disk but the system could not start-up

On MacBook Pro early 2008, restored the entire system from Time Machine backup disk to the entire disk.
The previous system on the backup disk had FileVault turned on.
The restore completed successfully and I was prompted to restart the system via the new restored system disk.
I heard the normal start-up sound, then the Apple logo, but it stuck at the logo screen. And the cooling fan run at almost full speed?
I have been waiting for a few hours, guessing it might FileVault the disk.
Finally I have to shutdown the machine as it stuck at the logo screen forever.
Anyone has the same issue? Any ideas?

BTW, I also tried Repair the system disk, Fix permissions via Disk Utility.
I guess I must lose some files either during the backup or the restore.

Time Machine Backup Disk Cannot be found

While my iMac was in sleep mode, I disconnected the power to my external, firewire time machine backup disk. The backup is a Western Digital hard drive.
Now I get the error message "Your Time Machine Backup Disk Cannot be Found"
I have rebooted the computer with the disk connected and the disk still doesn't show up on the desktop.
I rebooted the computer with the disk powered up but the firewire disconnected, then connected the firewire. The disk still doesn't appear on the desktop.
I tried Disk Warrior, and Disk Warrior doesn't see the external Time Machine disk.
What to do?

Dan Mackey1 wrote:
While my iMac was in sleep mode, I disconnected the power to my external, firewire time machine backup disk. The backup is a Western Digital hard drive.
That might corrupt your backups, but shouldn't make the disk completely un-usable.
Disconnect it and power it off for several minutes, turn Time Machine OFF, then Restart your Mac again. Let your Mac get powered-up and running before connecting and powering the disk on. Then see if Disk Utility can see it.
Is this a dual-mode disk? If so, try connecting via USB -- it may work that way.
Can you tell if it's running? Is it one with a light, and/or can you hear it run or feel it vibrating?

Can you share photos between computers on a local time machine network. I have iMac with lots of pictures I would like to view on my MacBook Air. Does anyone know how to do this?

Can you share photos between computers on a local time machine network? I have iMac with lots of pictures I would like to view on my MacBook Air. Does anyone know how to do this?

Can you share photos between computers on a local time machine network? I have iMac with lots of pictures I would like to view on my MacBook Air. Does anyone know how to do this?

Migration Assistant won't see my Time machine backup disk

Hi,
I've seen some other discussions but they apply to slightly different situations and turn out to be too complex for me to follow. My situation is this. My Dec 2008 Macbook running Lion just died. Not sure what the problem is but it seems to be the hardrive. It will take me a while to get it fixed and in the meantime I have a farly new mac mini running Lion.
I also have been making Time Machine backups to an external drive. I read that I could migrate content from a time machine backup and I connected the backup to my mac mini and launched Migration Assistan (MA), seleted the option to migrate from a Time Machine backup. MA is stuck trying to find my disk even though it shows up in Finder. This is the screen I'm talking about http://screencast.com/t/AC0OiVzxx
I'm hoping there is the equivalent of a little on/off switch that I'm not seeing and you can direct me too.
How can I get MA to see my Time Machine backup disk? Thanks for your help.

sorry, i don't know what else it could be then. if you have another external drive you can try doing a full system restore from the TM backups onto that drive and see if MA will recognize that drive and migrate from it. other than this there is always manual migration. slow and tedious but it can be done. see this link for help with that
http://discussions.apple.com/message.jspa?messageID=6185507

Verify Disk failed for Time Machine backup disk

Thread <http://discussions.apple.com/thread.jspa?messageID=7930301&#7930301> discussed a similar issue, but it was closed without an answer so I'm opening a new one.
After a power failure I ran Disk Utility to Repair Permissions on my boot disk and Verify Disk on another that I use to store media files; neither had significant problems. Then I ran Verify Disk (verify, not repair; and disk, not permissions) on my Time Machine backup disk. It started spitting out the errors shown below. The time remaining counted up to 16 minutes, but wasn't coming down very fast so I left it running overnight. My machine is set to not sleep or spin down the disks. The next evening it was down to 12 minutes left, and was still spitting out the same errors. The second evening it was done, having failed out as shown in this log file excerpt:
2009-06-20 22:25:48 -0400: Verifying volume “Backup”
Starting verification tool: 2009-06-20 22:25:48 -0400
2009-06-20 22:25:50 -0400: Checking Journaled HFS Plus volume.
2009-06-20 22:25:50 -0400: Checking Extents Overflow file.
2009-06-20 22:25:50 -0400: Checking Catalog file.
2009-06-20 22:35:21 -0400: Checking multi-linked files.
2009-06-20 23:08:17 -0400: Checking Catalog hierarchy.
2009-06-20 23:16:59 -0400: Checking Extended Attributes file.
2009-06-20 23:18:34 -0400: Checking multi-linked directories.
2009-06-20 23:31:05 -0400: 2009-06-20 23:31:05 -0400: Incorrect owner flags for directory hard link (id = 3763501)
2009-06-20 23:31:05 -0400: 2009-06-20 23:31:05 -0400: 2009-06-20 23:31:05 -0400: (It should be 0x2 instead of 0x0)
2009-06-22 15:14:54 -0400: 2009-06-22 15:14:57 -0400: Incorrect owner flags for directory hard link (id = 7746623)
2009-06-22 15:14:59 -0400: 2009-06-22 15:15:00 -0400: 2009-06-22 15:15:02 -0400: (It should be 0x2 instead of 0x0)
2009-06-22 15:20:35 -0400: Checking volume bitmap.
2009-06-22 15:20:37 -0400: Checking volume information.
2009-06-22 15:20:39 -0400: 2009-06-22 15:20:41 -0400: The volume Backup needs to be repaired.
2009-06-22 15:20:43 -0400: Error: Filesystem verify or repair failed.2009-06-22 15:20:44 -0400:
2009-06-22 15:20:44 -0400: Disk Utility stopped verifying “Backup” because the following error was encountered:
Filesystem verify or repair failed.
At that point the whole system was extremely sluggish, and the access light on the backup disk was flashing steadily. The pmTool process seemed to be running away, but the system wasn't responsive enough for me to do much about it, so I held down the power button to shutdown. Upon the 2nd restart the system booted and seems to be OK, but I'm leery of running another Verify Disk.
What's going on? Are those errors anything to worry about? Is it possible to run Verify Disk on a Time Machine backup disk? What about Repair Disk?

John Seal wrote:
2009-06-22 15:20:43 -0400: Error: Filesystem verify or repair failed.2009-06-22 15:20:44 -0400:
2009-06-22 15:20:44 -0400: Disk Utility stopped verifying “Backup” because the following error was encountered:
Filesystem verify or repair failed.
At that point the whole system was extremely sluggish, and the access light on the backup disk was flashing steadily. The pmTool process seemed to be running away, but the system wasn't responsive enough for me to do much about it, so I held down the power button to shutdown.
Any time Disk Utility says you need to repair a disk, you need to repair it. Period.
So run it. If it fails to repair everything, run it again (and again) until it either repairs everything or can't repair any more. If it can't repair it, post back and we'll discuss options.
There's no point in running +Verify Disk+ on an external drive; just run +Repair Disk.+ The only time +Verify Disk+ is needed is for your internal HD (because you can't repair the disk you're running from).
And you need to do that again because of the forced power-down. Any time there's an abnormal shutdown, it's possible the file system on your internal HD can be damaged. Usually it isn't, but it's possible. If that says you need to repair it, you'll have to boot from your Leopard Install disc and use it's copy of DU. Post back if you need to do this but don't know how.

Time machine, network, disk addition, JBOD array question.

Similar Messages

Maybe you are looking for