Time out parameter to avoid Table locking

Hi,
I am looking at any configurable parameter if any for setting the time out parameter to avoid Table locking.Now what's happening is : If i run select ...for update from one session,oracle is applying a lock till i do a commit.And if i run the same query from another session,it takes unspecified time without returning any error.Using the query with NOWAIT options does not serve my purpose.
Any help in this regard is appreciated
Thanks
Sam

Are you looking for a way to time out the original query, or are you looking for a way for the second query to wait for some time and then abort if it is unable to lock the row(s)?
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

Similar Messages

Configuring profile parameter for a table lock object

Hi Experts-
I want to set the 'wait time' (_WAIT) parameter as a profile parameter for a table lock object.
I have created a lock object on a ZTable. I lock and unlock this object in exclusive non-cumulative mode through the enqueue and dequeue lock object function modules. These generated FMs are invoked via my custom function module.
My function module will run in the background as a scheduled task in R/3. I execute the Enqueue FM at the start of the FM and keep the table locked until the last step finishes in my FM and then I Dequeue it. I want to have the processing wait and retry the Enqueuring FM at set intervals in case the one run doesn't finish entirely and a new run of this same job kicks off.
Thank you,
- Vik.

Set the wait parameter = 'X'. These means that if it encounters a lock, then it will wait a certain time for the lock to be released. This certain time is a system value set by your basis team. I don't imagine it being a very long time.
CALL FUNCTION 'ENQUEUE_EZPIPHYINVREF'
       EXPORTING
            MODE_ZPIPHYINVREF = 'E'
            MANDT             = SY-MANDT
            _WAIT             = 'X'.
Regards,
Rich Heilman

Time Out parameter in SAP BW

Hello
I wanted to know if the Time Out Parameter in SAP BW shoul have the same value of the business object time Out parameter?
Thanks for your help.

Hi,
In BW you will rdisp/wp_max_runtime has a program execution timeout parameter ..
BO is a web-based application and hence it will not have same parameter. In BO you will have HTTP timeout parameter.
Hope this helps.
Regards,
Deepak Kori

Need to increase the Time out parameter for executing BI queries

Folks,
We are publishing BI Query on portal , we are getting Time out error while executing the quries , please let me know how to increment the time out parameter
Thanks
Manish

Hi Manish,
Try this link
Time out time
Cheers....

Resource busy time out oracle message - Concurrency and Locks

I have a requirement to generate gapless invoice and receipt number in our application. so i have currently used the below approach.
a. created table with a column to hold the invoice and receipt number sequence value.
b. whenever transaction gets succeed. i will lock the table which holds the invoice number and receipt number inorder to avoid the sequential number slipages.
Issue
1. since the application belongs to online payment through portal by customers, when concurrent users trying to pay and while generating receipt number's, i am facing with "resource busy time out" message frequently. Here i noticed when user1 locks the table to access the receipt number value and session is not committed or rollback and another session user2 trying to access the same resource, in this scenario i am facing this error.
Frequency of encountering this error is low, but customer was telling us this error is show stopper and affects normal business.
Is there any alternative solution or method can be applied to overcome this problem?
Current SQL used in application
cursor <cursor name> is.
select <column_name>
into <variable>
from <table name>
for update of wait 5
update <table name> set <column name> = value + 1
where current of <cursor name>

1e0ea4a1-1610-4dec-a44c-4ee1f46ba1a4 wrote:
I have a requirement to generate gapless invoice and receipt number in our application. so i have currently used the below approach.
Engage the business and inquire WHY this "requirement" exists. I have personally never seen an audit requirement wherein invoices MUST be devoid of gaps (that's not to say they do not exist, just that I've never seen one
They certainly must be unique, but that's what a sequence will do for you. If the business absolutely needs gapless information, then they will have to be willing to pay the price which is going to be longer transaction times (as requests queue in a busy system to get this sought after gapless resource). Your job is to explain this to them ... nothing comes without a cost.
The only thing you can really do (assuming you engage the business and the requirement doesn't change) is ensure the transactions are designed in such a manner that
1) they complete as fast as possible AND that the locking is done at the latest possible stage of the transaction
2) there is no user interaction (you cannot allow the users a "review" screen of any sort ... because users get silly sometimes and go for a coffee while reviewing things)
Cheers,

Time out error in internal table

HI ,
i am using one internal table as below .
loop at i_main.
i_temp-field0 = i_main-field0.
loop at i_main into wa_main where some conditions.
i_temp-field1 = wa_main-field1 * wa_field-field2.
endloop.
append i_temp.
endloop.
so here in that calculations becoz of more records in i_main i am getting time_out error .
so how we can avoid this can any one pls help me .
THX

hi chaaya,
use this code.
sort i_main by field0.
loop at i_main.
at new field0.
if not i_temp is initial.
append i_temp.
endif.
i_temp-field0 = i_main-field0.
endat.
i_temp-field1 = wa_main-field1 * wa_field-field2.
endloop.
regards,
Peter

How to avoid table lock in java

hey all
is there any way/possibility that we can lock a table in our program? for instance, after create a statament which updates a table and forget about close the statement or connection, will this be able to lock a table?

Alot of this depends on the DB you're using. Have a look at this if you are using Oracle DB.
http://www.akadia.com/services/ora_locks_survival_guide.html
For example, in Oracle, if you code like this:
   EXEC SQL
     LOCK TABLE xxxxxx
     IN SHARE UPDATE MODE;
   POSTORA;... or this:
        SELECT 'X'   FROM xxxxxxx
        WHERE ROWID = ?
        FOR UPDATE OF xxxxxxx_column;... You could be locking the DB. And I could be wrong, but it is my understanding that the 'LOCK' command specifically locks the entire table, while just coding 'for update of ... ' locks the selected rows.
That said, and as far as the Java part goes, you should close 'stuff' that you open as soon as you're done with it. Read the API for more info.

User Time Out Parameter

Hello Everyone,
Does anyone know if there is a way to reset the timeout parameter in an ABAP program if the user has not sent a command to the backend system? For example, our timeout is set at 30 minutes and we want this parameter to be constantly reset (or have the program ignore the timeout parameter) in a specific program that we have.
Please let me know what you think.
Scott

Hi,
In programs it is used inside loop ... endloop when the data extraction or data updation takes long time.
Hope it helps.
Regards,
Siddhesh S. Tawate

Time out parameter

Hi ,
As you know in SAP there is timeout parameter, like when a user logins in SAP and doesn't use SAP for more than 30min or more( it depends on the parameter set) , SAP automatically timeouts.
My qyestion is :-
We have a group of users where this users are very low level users, we want to remove this timeout error for this particular group of users , is there any procedure for the same or do you have any sugesstions.
Please help me friends.
thanks
anuroop

HI anuroop!
Parameters are Instance dependent and you can install/define a SAP instance and define a logon group to allow these users to logon in this instance. For instance... You could change the parameter in Central Instance and allow people to work on it via Logon Group.
Is this case you can start today because auto logout parameter is dynamic.
Regards
FF

ISCSI client Time-out Parameter

Hi
I have Configured iSCSI (Solaris iSCSI Initiators) in Solaris10 1/06 successfully with Netapp 740.
How can i influence how long the iSCSI-Client try�s to connect to the target before the mount crashes?
iscsi: [ID 286457 kern.notice] NOTICE: iscsi connection(67) unable to connect to target
After seven tries i got (In all ca. 4.06 minutes)
iscsi: [ID 328943 kern.notice] NOTICE: iscsi session(66) ******netapp:sn.61 offline
and the mounts crashes.
I didn�t find any Resources about iSCSI-Parameters in Solaris iSCSI Initiators.
sincerelly
Roland

No, you didn't configure successfully. If so, it won't crash at all.
Change your 740's timeout from very low (10 sec) to higher for testing, make sure you won't get error again in the messages file.
cheers,

Configurable parameter of ccBPM for time out

Hi,
We are using ccBPM for collection files based on some correlation and we have set-up a deadline branch for a particular time interval to collect files.
We want to set the time out parameter as aconfigurable parameter so that everytime we dont need to touch ccBPM and can make changes in ID.
i have tried using this but in deadline branch I can only define numeric value..
Could you please tell me if we have any other way to implement this or we cannot use configurable parameter for deadline branch time duration?
Thanks in Advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen Kaur Chadha,
I understand your requirement is to collect messages for particular time period (like standard pattern BpmPatternCollectTime). And, if this time period changes, you want implement the changes without editing ccBPM.
As far as I know, it is not possible. I do not recommend you to think about it, because, the time duration for which messages should be collected will not change every day in actual business scenario. I guess once you define time period based on business and technical details, it will be constant. Letu2019s say if it changes once in a blue moon, then edit the ccBPM. If you want more control on size of message getting collected you can combine these patterns [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm ]
Regards,
Raghu_Vamsee
Edited by: Raghu Vamsee on Jan 13, 2011 4:20 PM

SOAP Adapter: Connection time out error

Hi Guys,
I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
Thanks & Regards
Vijay

hi
this is a time out error
increase the timeout value by specifying the parameter
XI.Timeout in the module parameter of soap Adapter
OR
1. This is because of TimeOut. The default timeout value for synchronous calls is 5
minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
the SOAP adapter. The value must be given in milliseconds. For example, value 600000
represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
2.The Other Options is send the queue id with your request message.
http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
&version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
where xxxxxxxxxxxxxxxx is an ABAP queue ID.
3.Check your RWB message monitoring.
Is there any system failure message and holding message be there.
If then clear the messages.
4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low.

Session time out in BIP

All,
I have set the BIP security as Oracle BI SERVER and able to successfully log in from dashboards, answers to BIP. but after some time BIP is getting timed out.
where can I set the session time out parameter? and
how to make the BIP session valid as long as OBI presentation services session is valid?
Thanks in advance.

Post Author: amr_foci
CA Forum: Authentication
go to the universe which this report based on, get the parameters window from (File->Paramaters)
check the CONTROL tab
see those parameters and configure them as you want
good luck
Amr

Session time out in ADF 11g application.

Hi,
I am working for the ST BPO Project. We have one ADF application that is migrated from 10g to 11g.And our application is deployed on the weblogic server.
we are facing some session time out issues in the application which is intermittent and whenever we leave the web page for some times, the session get timed out and page gets errored out.
We have set the session time out parameter in web.xml as well as for AM.
Session Management:
Following are the parameters which we have set already.
1.     Web.xml
We have put the following session time out in web.xml:
<session-config>
<session-timeout>180</session-timeout>
</session-config>
2.     bc4j.xcfg
We have set the timetolive property of AM as:
<AM-Pooling jbo.ampool.timetolive="10000000" jbo.pooltimetolive="10000000"/>
3.     Also for the DB we have set the session time out to 180 mins.
But if we leave the page for say some times around 5-10 min, the session of the page expires and it throws error.
Also, as per our investigation : After some times the view id of the page gets expired and hence the issue comes. Also the behaviour is only on the weblogic server and we don't face any issues in the local set up.
Kindly help us in solving this problem. Also let me know if any further details is required.
Thanks
Namit.

Hi,
suggest you also contact customer support on this issue. The version of your JDeveloper 11g release may matter as well
Frank

Time out error in receiver soap adapter

Hi,
My scenario is file to soap file with out BPM.I am using a currency converter wsdl.
I am getting a time out error in soap receiver channel.
Do i need to change the time out parameter?Where do i change that?Please help me to solve it out.
Following are the errors in the soap communication channel.
SOAP: call failed: java.net.ConnectException: Connection timed out
SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out. Setting message to status failed.
Regards
Divia

Hi Prateek,
Thanks for your replay. I am able to open the URL from XI/PI.
I tried by testing the same URL by using XI 3.0, its working fine and i am getting required data, but in PI 7.1 i am getting an error.
Error is:
In MONI:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect
In RWB:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect
What could be the reason?
Regards,
Venu

Time out parameter to avoid Table locking

Similar Messages

Maybe you are looking for