Time out parameter

Hi ,
As you know in SAP there is timeout parameter, like when a user logins in SAP and doesn't  use SAP for more than 30min or more( it depends on the parameter set) , SAP automatically timeouts.
My qyestion is :-
We have a group of users where  this users are very low level users, we want to remove this timeout error  for this  particular group of users , is there any procedure for the same or do you have any sugesstions.
Please help me friends.
thanks
anuroop

HI anuroop!
Parameters are Instance dependent and you can install/define a SAP instance and define a logon group to allow these users to logon in this instance. For instance... You could change the parameter in Central Instance and allow people to work on it via Logon Group.
Is this case you can start today because auto logout parameter is dynamic.
Regards
FF

Similar Messages

  • Time out parameter to avoid Table locking

    Hi,
    I am looking at any configurable parameter if any for setting the time out parameter to avoid Table locking.Now what's happening is : If i run select ...for update from one session,oracle is applying a lock till i do a commit.And if i run the same query from another session,it takes unspecified time without returning any error.Using the query with NOWAIT options does not serve my purpose.
    Any help in this regard is appreciated
    Thanks
    Sam

    Are you looking for a way to time out the original query, or are you looking for a way for the second query to wait for some time and then abort if it is unable to lock the row(s)?
    Justin
    Distributed Database Consulting, Inc.
    www.ddbcinc.com

  • Time Out parameter in SAP BW

    Hello
    I wanted to know if the Time Out Parameter in SAP BW shoul have the same value of the business object time Out parameter?
    Thanks for your help.

    Hi,
    In BW you will rdisp/wp_max_runtime has a program execution timeout parameter ..
    BO is a web-based application and hence it will not have same parameter. In BO you will have HTTP timeout parameter.
    Hope this helps.
    Regards,
    Deepak Kori

  • Need to increase the Time out  parameter for executing BI queries

    Folks,
    We are publishing BI Query on portal , we are getting Time out error while executing the quries , please let me know how to increment the time out parameter
    Thanks
    Manish

    Hi Manish,
    Try this link
    Time out time
    Cheers....

  • User Time Out Parameter

    Hello Everyone,
    Does anyone know if there is a way to reset the timeout parameter in an ABAP program if the user has not sent a command to the backend system?   For example, our timeout is set at 30 minutes and we want this parameter to be constantly reset (or have the program ignore the timeout parameter) in a specific program that we have.
    Please let me know what you think.
    Scott

    Hi,
    In programs it is used inside loop ... endloop when the data extraction or data updation takes long time.
    Hope it helps.
    Regards,
    Siddhesh S. Tawate

  • ISCSI client Time-out Parameter

    Hi
    I have Configured iSCSI (Solaris iSCSI Initiators) in Solaris10 1/06 successfully with Netapp 740.
    How can i influence how long the iSCSI-Client try�s to connect to the target before the mount crashes?
    iscsi: [ID 286457 kern.notice] NOTICE: iscsi connection(67) unable to connect to target
    After seven tries i got (In all ca. 4.06 minutes)
    iscsi: [ID 328943 kern.notice] NOTICE: iscsi session(66) ******netapp:sn.61 offline
    and the mounts crashes.
    I didn�t find any Resources about iSCSI-Parameters in Solaris iSCSI Initiators.
    sincerelly
    Roland

    No, you didn't configure successfully. If so, it won't crash at all.
    Change your 740's timeout from very low (10 sec) to higher for testing, make sure you won't get error again in the messages file.
    cheers,

  • Configurable parameter of ccBPM for time out

    Hi,
    We are using ccBPM for collection files based on some correlation and we have set-up  a deadline branch for a particular time interval to collect files.
    We want to set the time out parameter as aconfigurable parameter so that everytime we dont need to touch ccBPM and can make changes in ID.
    i have tried using this but in deadline branch I can only define numeric value..
    Could you please tell me if we have any other way to implement this or we cannot use configurable parameter for deadline branch time duration?
    Thanks in Advance
    Best Regards,
    Harleen Kaur Chadha

    Hi Harleen Kaur Chadha,
    I understand your requirement is to collect messages for particular time period (like standard pattern BpmPatternCollectTime). And, if this time period changes, you want implement the changes without editing ccBPM.
    As far as I know, it is not possible. I do not recommend you to think about it, because, the time duration for which messages should be collected will not change every day in actual business scenario. I guess once you define time period based on business and technical details, it will be constant. Letu2019s say if it changes once in a blue moon, then edit the ccBPM. If you want more control on size of message getting collected you can combine these patterns [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm ]
    Regards,
    Raghu_Vamsee
    Edited by: Raghu Vamsee on Jan 13, 2011 4:20 PM

  • Session time out in BIP

    All,
    I have set the BIP security as Oracle BI SERVER and able to successfully log in from dashboards, answers to BIP. but after some time BIP is getting timed out.
    where can I set the session time out parameter? and
    how to make the BIP session valid as long as OBI presentation services session is valid?
    Thanks in advance.

    Post Author: amr_foci
    CA Forum: Authentication
    go to the universe which this report based on, get the parameters window from (File->Paramaters)
    check the CONTROL tab
    see those parameters and configure them as you want
    good luck
    Amr

  • Session time out in ADF 11g application.

    Hi,
    I am working for the ST BPO Project. We have one ADF application that is migrated from 10g to 11g.And our application is deployed on the weblogic server.
    we are facing some session time out issues in the application which is intermittent and whenever we leave the web page for some times, the session get timed out and page gets errored out.
    We have set the session time out parameter in web.xml as well as for AM.
    Session Management:
    Following are the parameters which we have set already.
    1.     Web.xml
    We have put the following session time out in web.xml:
    <session-config>
    <session-timeout>180</session-timeout>
    </session-config>
    2.     bc4j.xcfg
    We have set the timetolive property of AM as:
    <AM-Pooling jbo.ampool.timetolive="10000000" jbo.pooltimetolive="10000000"/>
    3.     Also for the DB we have set the session time out to 180 mins.
    But if we leave the page for say some times around 5-10 min, the session of the page expires and it throws error.
    Also, as per our investigation : After some times the view id of the page gets expired and hence the issue comes. Also the behaviour is only on the weblogic server and we don't face any issues in the local set up.
    Kindly help us in solving this problem. Also let me know if any further details is required.
    Thanks
    Namit.

    Hi,
    suggest you also contact customer support on this issue. The version of your JDeveloper 11g release may matter as well
    Frank

  • Time out error in receiver soap adapter

    Hi,
    My scenario is file to soap file with out BPM.I am using a currency converter wsdl.
    I am getting a time out error in soap receiver channel.
    Do i need to change the time out parameter?Where do i change that?Please help me to solve it out.
    Following are the errors in the soap communication channel.
    SOAP: call failed: java.net.ConnectException: Connection timed out
    SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out
    Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out. Setting message to status failed.
    Regards
    Divia

    Hi Prateek,
    Thanks for your replay. I am able to open the URL from XI/PI.
    I tried by testing the same URL by using XI 3.0, its working fine and i am getting required data, but in PI 7.1 i am getting an error.
    Error is:
    In MONI:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect
    In RWB:
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect
    What could be the reason?
    Regards,
    Venu

  • Error time out to connect FTP server

    Hi Experts,
    I am getting the error in receiver communication channel (FTP) as :
    An error occurred while connecting to the FTP server ''. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: The control connection to the FTP server ""  timed out while reading the server reply.'. For details, contact your FTP server vendor.
    Getting this error for a particular interface. Changed the time out parameter but not working.
    the same IP address is used for same receiver but different interface and it is in green status.
    tried to restart the adapter but same time out error.
    Same configuation is done for two receiver channels .. but getting above error for a particular interface.Please help.
    Thanks,
    Swapnashree

    Hi Swapna,
        If you are facing problem with only one interface then you make some dummy changes in configuration(ID) to that perticular channel and activate.
    After doing this you just restart your communication channel and check if you have any luck.....
    Also check if you have permissions ......for the user and folder which you are accing in your channel...
    Naveen.

  • JDBC Time out issue

    Hi,
    We have used JDBC read time out parameter.This parameter is behaving very inconsistently.For few case it is working perfectly and for some it is not working.
    Could you please let us know what could be the reason.

    Hi,
    Connect team wanted Presenter to implement a message box that would pop-up whenever connect session times out.  This was necessary to stop content from playing when session times out and accuracy of reporting. With this change from both Connect & Presenter, when session times out we show a message box saying that ‘Connect session timed out’. When user presses ‘Ok’ button, content will be closed and the user will be taken back to ‘Login’ screen. This is how it is implemented.
         Once the session is timed out, the subsequent http-posts give a response code ‘-3’ to indicate that session is invalid.
         Presenter checks for this error code for every http-response.
        Once we receive this, we show the message box.
    And to support this behavior, there was a change made on the Connect server side also in 9.1 version. However this change does not work properly on Connect servers which are below 9.1. This is because they always return an error code of -3 in meeting scenario.
    Details of Pr 9.0.2 Fix:
    Since connect team has no plans for back-porting this fix into older version of connect ( i.e, before Connect 9.1 ), Presenter have added code  to check the connect server version and if it is below 9.1, Presenter do not show the session timeout warning message. Otherwise Presenter show the message since the connect server has the right implementation to support this behavior.
    Having said this,
    It will be fixed for you only if you have a adobe Presenter 9.0.2 content uploaded in a connect meeting.
    You may update yoyr Presenter using Presenter->Updates.
    And hence any content from PRESENTER  9.0.2 on Connect version greater than equal to 9.1 will not have this problem.
    Hope this makes things clearer to you.
    Thanks
    Alpi
    Adobe Presenter Enginering Team

  • SOAP Adapter: Connection time out error

    Hi Guys,
                I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
    Thanks & Regards
    Vijay

    hi
    this is a time out error
    increase the timeout value by specifying the parameter
    XI.Timeout in the module parameter of soap Adapter
    OR
    1. This is because of TimeOut. The default timeout value for synchronous calls is 5
    minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
    the SOAP adapter. The value must be given in milliseconds. For example, value 600000
    represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
    2.The Other Options is send the queue id with your request message.
    http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
    &version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
    where xxxxxxxxxxxxxxxx is an ABAP queue ID.
    3.Check your RWB message monitoring.
    Is there any system failure message and holding message be there.
    If then clear the messages.
    4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low.

  • Jms Adapter invoke activity Reply Time out

    I am working on dynamic routing using JMS adapter. i am able to set the Destination Queue and Reply queue as part of Invoke activity properties.
    Now i want to set the reply time out parameter as same. I am able to set replyTimeout in .JCA file, But i want to set this value dynamically.
    Can you please help on this.

    I am working on dynamic routing using JMS adapter. i am able to set the Destination Queue and Reply queue as part of Invoke activity properties.
    Now i want to set the reply time out parameter as same. I am able to set replyTimeout in .JCA file, But i want to set this value dynamically.
    Can you please help on this.

  • Auxiliary instance connection time out

    Hi Experts,
    I am creating a duplicate DB on oracle 10.2.0 on XP on a remote host.
    first host (suman)is source and the second host(sumanr) is target means duplicate. in 2nd host i have installed the oracle software, created the pswd file, pfile, the instance and started in nomount. In 1st host DB is opened and running, now I am trying to connect to the 2nd host instance but getting following error..
    RMAN> connect target
    connected to target database: ORCL (DBID=1255758361)
    RMAN> connect auxiliary sys/oracle@stby
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-04006: error from auxiliary database: ORA-12170: TNS:Connect timeout occurredthe host string 'stby' is to connect to the 2nd host DB.
    I have not mentioned any time out parameter in sqlnet.ora
    Any help will be appreciated
    Rgds

    Always try to clone from Aux instance. as
    rman target sys/****@orcl auxiliary /
    Error:     ORA-12170 (ORA-12170)
    Text:     TNS:Connect timeout occurred
    Cause:     The server shut down because connection establishment with a
         client failed to complete within the allotted time interval. This
         may be a result of network/system delays; or this may indicate
         that a malicious client is trying to cause a Denial of Service
         attack on the server.
    Action:     If the error occurred because of a slow network/system,
         reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in
         sqlnet.ora to a larger value. If a malicious client is suspected,
         use the address in sqlnet.log to identify the source and restrict
         access. Note that logged addresses may not be reliable as they can
         be forged (e.g. in TCP/IP).

Maybe you are looking for