Time remap not keyframing in Premiere Pro CC

I'm trying to keyframe Time Remapping in Premiere Pro CC 7.0.1, following the Adobe TV Tutorial (which uses a version of CS6/CC previous to the July 2013 update) and am unable to add keyframes directly to the timeline or adjust speed keyframes in the Effects tab. Am I missing a newer technique? I'm on a Mac Pro, OSX 10.8.3. with Nvidia Quadro 4000. Thanks

Ask in the Premiere forum.
Mylenium

Similar Messages

Scene Detect not functioning in Premiere Pro CS6

Hello all,
Having an issue with Scene Detect not recognizing individual scenes when I Capture HDV footage from my Canon XH series cameras. Tapes just come in as one long file rather than individual scenes. I am using CS6 on my MAC computers (OS 10.7.5 and 10.6.8).
This is baffling as I've captured many tapes from many weddings and have never experienced this problem to this point.
I did reset my cameras to default settings recently but can't seem to find anything that would indicate that causing the issue. However, it is the only change I have made unless a recent Adobe or OS update could have caused the issue?
Your help and knowledge are greatly appreciated!

Problem solved.
For anyone seeking a possible solution to this simple but incredibly aggravating issue: Make sure your camera's date and time fields are set. Premiere Pro's "Scene Detect" function uses your cameras time signature to differentiate scenes in your captured footage. No time code = no individual scene detection.
When I reset my camera to default settings I erased my time and date fields. I wasn't too worried about it as I typically use these cameras for their HD SDI capability with timecode captured via Tricaster, however this became a frustrating problem when I used the cameras for a recent wedding capture and I now have four long files rather than the intended multiple scenes I need for editing...
Hope this simple discovery makes someone's day a little easier...

I updated my mac's OS to Yosemite and now my eye drop tool will NOT work inside premiere pro. Can anyone help me fix this issue?

The eyedropper tool for selecting colors to key out or to fill text will not work inside premiere pro, this error started when I updated my mac os to yosemite.

Hi Transportation,
Does the error occur in OS X 10.9? If not, why not remain at OS X 10.9? Is it necessary to run OS X 10.10?
The general rule of thumb is that when you are running software that is no longer tested or supported on a new operating system, you have to prepare for anomalies like this. You may want to install a separate bootable hard drive with OS X 10.9 on it so you can continue running that software more reliably.
Hope that helps,
Kevin

Rendered clips turned out to be not render after premiere pro update

Hello guys,
I was using the old version of premiere pro for quite awhile, then my colleague told me to update it to the lastest to fix any bugs that exist.
so I updated my premiere pro to version 4.2.1.
After the update, I realised all the rendered files became not render. the timelines were all red and the program did not prompt for the rendered clips when I open the projects. For what I know, the rendered clips are still in the folder 'Adobe Premiere Pro Preview Files.'
I am really desperate for help as the amount of clips rendered is really a lot. I appreciate any help, thanks so much.

Welcome to the forum.
It sounds like the update might have separated the Render files from the Project's links.
Now, remember that Rendering is only necessary for the smoothest playback. You only have to Render, where you are working with critical aspects, like Keyframing Motion/Scale, or adding Effects. I complete many Projects, and never bother to Render, as I can see playback at a high enough level to do my editing. OTOH, there are often tiny segments, that might get Rendered many dozens of times - usually where Keyframing was done.
One can use the WAB (Work Area Bar) to just Render a small segment of the Timeline.
Now, why your existing Render files became un-Linked, I do not know that answer.
Good luck,
Hunt

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Adobe Media Encoder Dynamic Link Server NOT CONNECTING to Premiere Pro

I have Media Encoder CS5, as part of the Creative Suite 5. My programs say that I have no updates to install, so everything is up to date.
I am having an issue with the dynamic link server.
Here's what has happened thus far.
Recently when I have tried to encode a project sequence from Adobe Premiere Pro it DOES NOT work. This is the first time that has happened.
I repeated the process and again, it still happened, unable to connect to the Dynamic Link.
The Error messages that I was getting was "could not read from source. Check if it has been moved or been deleted"
Once, I received this, I went to check to see if all files were linked properly, and they were. Everything was rendered and all was good in the timeline and the project itself.
Yet, again, the error message appeared.
Then I tested a previous project that I knew had been exported and worked through Adobe to Media Encoder. And all the files were linked properly and yet again received the error message I wrote above.
Then I thought the Dynamic Link itself wasn't working properly, so I tested importing an Adobe After Effects Comp into a Premiere Timeline and it DID WORK.
Then I went and tested if a video file of an already exported project would be able to sync to Media Encoder. And this WORKED.
I then went to add the file directly from Media Encoder and when I went to add a sequence from a saved Premeire File, it would take about 5 minutes "Connecting to Dynamic Link Server", to then state, "Connecting to Dynamic Link Server Failed"
My question is, how do I fix the dynamic link between Media Encoder and Premiere? Because, additionally, importing and After Effects Sequence works with Media Encoder.

I've been searching/troubleshooting for days, none of the firewall, new shortcuts in folder, antivirus, you name it I tried it even wiped my system which seemed to work at first..
What did it for me in the end was I had Dxtory (a software recorder, for recording gameplay) running on startup, and somehow it interfered with only Premiere projects in Media Encoder, I could still import AE projects go figure.
Check all the programs you have running or use sometimes, if they have some sort of hook into other programs/deal with video/codecs this could be your problem too!
Thanks to everyone trying to solve this problem!
-JonOfAllGames

Red Epic Importer not working in Premiere Pro 5.52 (what am I doing wrong?)

Hello:
I installed latest version of Adobe Premiere Pro 5.52 this week.
I immediately downloaded the RED EPIC Importer updates found here:
http://labs.adobe.com/technologies/r...details#tabTop
I believe I followed the directions accurately…After the installation I rebooted my Mac Pro...
When I tried to import the R3D sample files, I still received the same "corrupt file message" --even after installing the RED EPIC importer files
To be certain, I have reinstalled the RED EPIC Importer update several times----same error message…
My question: Do I need to clear a cache file, restart Premiere (while holding down a key) or do something else to make this work?
Forgive me for asking something that has been covered at length already -- I just don't see an answer....
Thanks,
Frank

I think I am seeing the same thing - or I am not doing something right.
Brand new Windows 7 machine with quadro4000.
CS5.5
HOWEVER> one workaround I think is to open the footage using the "view as" menu set to FILE DIRECTORY.
BUT I think this removed the HDR functionality that I get when I open the clips in Cine-x.
I thought that perhaps this was related to the initial transfer to our storage via a Mac platform and then copied over to our windows machine - but now I am not so sure.
I am pretty sure I also installed the drivers/importer files correctly, as I have done it twice now as well.
Anyone else having this issue?
Are we supposed to use a different workflow to bring the EPIC footage into a sequence?
S

Audiounit/VST plugins not appearing in Premiere Pro CC

Hi
I recently the purchased the Slate Virtual Bus Compressor plugin bundle and was hoping to use it in Premiere Pro CC on OSX 10.8.4
Currently the plugins will not show at all in Premiere, but do show in Audition. I would have expected that they shared the same engine when it came to scanning and registering VST and Audiounit plugins.
All the other plugins by this company show and work with no problems in Premiere.
Is there any way to get Premiere to refresh the plugin list so that it 'sees' the new plugins?
I bought these plugins after I installed Premiere CC so maybe that has something to do with it?

PrPro has more limited use of VST's, than full audio-editing programs, like Audition.
In very general terms, there are three "types" of VST's, relating to PrPro:
Those VST's that can load and be used by PrPro
Those VST's that can load, but cannot be used by PrPro (in older versions, the user got a one-time warning about such VST's. Not sure if the warnings still exist. Basically, the message stated "PrPro can load this VST, but cannot use it."
Those VST's that cannot be loaded (so cannot be used either), and will often cause PrPro to hang on launch. PrPro writes a "blacklist," at each failure, so that it does not try to load that VST again.
It will probably take a response from an Adobe Developer, to tell us exactly what some VST's load and work fine in PrPro, but others cause issues, or just do not show up.
Good luck,
Hunt

Blackmagic ultra studio sdi not working with Premiere Pro 8cc or A.E.cc(2014) on win7 GT630m i7 laptop - But works in A.E.cc(12.2.1.5)

There's a problem with the new update, as I no longer can use my BM Ultra Stdio SDI for monitoring. It let me select it but no image just black frame, with the new premiere pro cc 8 or a.e. cc (2014)
But i have No Problem in A.E. cc (12.2.1.5) work find just like it should, So what has happen here ? My system is Win7 Ultmate Laptop i7 Toshiba Satellite p850, dual gpu's GT630m & Intel HD 4000
With the latest blalckmagic drivers installed (10.1.1) This needs to be looked into, there is no way of monitoring accurately .

Problem Solved! (with a small catch)
While searching crashing issues I came across this thread,"Premiere Pro random crashing since update to 2014.2"
Marc_Lec Answered (and I paraphrase here)"...I had the same problem and this is what I did. In 'Preferences Memory' I increased the memory reserved for other application to at least half the installed and changed the optimize render from 'performance' to 'memory."
Thank You Marc_Lec for what has been a game changer for me since my last computer and the beginning of PremiereCC problems.
I changed my Memory reserved for Other Applications from the default 7gigs to 1/2 of my approx.31 available Gigs = 16Gigs. Viola!
No more crashing what-so-ever!
I still have to purchase an older GTX 980 graphics card to take advantage of Adobe's approved code to utilize X=Cuda Cores and GPU, but I think I'll hang onto my new TitanX, in hopes that Adobe will write code and approve it someday in the near future.
Now why doesn't Adobe say this officially about Memory Settings? (I don't know maybe they do and I missed I somewhere)
Mine and probably many peoples computers problems here on this board may be attributed to a simple Memory adjustment, because the computer needs more than 7Gigs to run itself, not to mention Premiere.

Media Encoder not starting from Premiere Pro

I'm having issues Exporting from Premiere Pro - I'd rather queue it through Media Encoder so I can move onto the next edit, but when I select Queue and Media Encoder opens, it doesn't do anything - simply sits there with "Not Currently Encoding" as opposed to importing the data to export.
Help?
Adobe Media Encoder, 6.0.2.81
Also installed other CC products Ps, Pr, Id, Lr, Ai, etc
I have run Adobe Updater but no updates available for Me.
Mac OS X 10.7.5 (Lion)
I am using Adobe Media Encoder through a Creative Cloud Membership subscription
Project is 6 minute film shot on Sony FS700 (AVCHD) and exports from Premiere Pro
No error message, just no action from the Application
Have not seen the problem before - most of my work is vi Canon 5D MK III, so maybe it's a Sony Codec issue? Though I have exported footage from this camera before though...
Apple MacBook Pro, 17",
I am using Mercury Playback Engine GPU Acceleration in Premiere Pro
Cheers

Finally got fed up and rang Adobe (if all else fails...)
Video Support Team Member opened my Library folder (Go\Go to folder...\~/Library/) then went into \Preferences\Adobe\Adobe Media Encoder\ and changed the folder called 6.0 to 6.0old (i.e. rename it to anything else), then hit Queue in Premiere Pro and the project successfully opened in Media Encoder and was able to start encoding.
Hopefully that helps someone else suffering the same issue!
Ollie

Premiere Elements 8 - "not compatible with Premiere Pro"?

I have installed, uninstalled, and reinstalled Premiere Elements 8 program twice. Updated to 8.01. When I save a "new project" file, then try to open it with the same program I created it with (Elements 8), it will not open the file and says: "Projects created with Adobe Premiere Pro and Adobe Elements are not compatible." What is going on? I don't have Premiere Pro, so how could I create a file with it?
Thanks for any help you can provide.
Susan

Try working through the following process from Adobe: Troubleshoot damaged projects | Adobe Premiere Elements
Cheers,
Neale
Insanity is hereditary, you get it from your children

Smart rendering for DNxHD quicktimes not working in Premiere Pro CC

Hi if I understand things correcty PPCC should be able to smart render DNxHD codec in a quicktime wrapper back . If so this does not appear to be working. I am noticing small differences if I pull in a DNxHD quickitme clip in to Premiere and just render straight back out again no effects just cuts as DNxHD Quicktime. My sequence is set up to be the same as the codec. Although I do notice that trying to set the exact settings for the quicktime codec is not easy as it resets back to the defaults of DNxHD 220 59.94i so maybe this has something to do with it and their is no option to choose the MXF setting for my medi a as Adobe have neglected to make a DNxHD115 preset.
If you look on the YC waveform you can see the changes occuring when you compare the two side by side. This however does not happen if you render out as Opt1a MXF as it does appear to smart render and when ingested back in you see no difference with the source DNxHD clip. I also notice that when you choose the Opt1a option it has an extra check box for smart rendering.
Anyone noticed this. It all works perfectly for ProRes quickitmes so just wondering why its not working for DNxHD quicktimes.
Simon

Hi Simon,
Here's what I have for you:
Smart Render support for DNxHD wrapped in QuickTime was added in Premiere Pro CC
You must have Avid codecs installed
No option to check to enable smart rendering is needed, Premiere Pro always tries to smart render by default
The first thing I would check is to see if the DNxHD (QuickTime) codecs are installed or not.
Thanks,
Kevin

Metadata changes in Lightroom are not reflected in Premiere Pro C

Hello everyone. I am having trouble with my current workflow. I am shooting RAW with a Canon 7d using Magic Lantern. I use raw2cdng to transform the mlv(raw) files to cdng. I then use lightroom to color correct my DNG files. I use lightroom to save the new metadata info to my files. Those changes that I make are reflected in file explorer, but when I import the files to Premiere Pro using the MediaBrowser the color corrections that I made in lightroom are not being shown. What am I doing wrong? Why is Premiere Pro not reading my metadata info correctly? I appreciate all of your help.

Timewarp / time remapping not running smoothly?

Hi, I've got a problem with speed variation. I got 25fps exr footage rendered out of 3ds max which I want to add some speed variation to it in AE. The problem I'm facing is the footage stutters when using time remapping. basically what I was trying to do was to render the scene out very slow so I can crank it up in AE. I've even tried different blending modes (pixel motion).
Here is what happens when trying to add some speed variation (when slowing it down to the footage initial speed)
1. time remapping causes stuttering.
2. while timewarp gives strange interpolation errors (looks like blurring error) speed goes like 100-->150-->100 and errors occurs when going back to 100
system:
windows 7 64bit, i7 2600k, 3,4GhZ, 16GB RAM, Geforce GTX 580
AE CS5.5

this 1 got timewarp ( and speed is cranked up, not slowed down)
thats the interpolation frame
that's without timewarp
time remapping brings same error but for RPF files looks like it works for EXR
looks like stuttering is not a problem anymore. i ran another random speed variation test and it'd run smooth. Have to double check it with the intended speed variation
I'll try to post a similar project where file size is smaller

Warp Stabilization not working on Premiere Pro CS6 or After Effects CS6

I've imported a 30 second clip both on Premiere Pro and After Effects. I am using CS6. I used a Canon 600D and my footage is 23.976 and 24fps. I've tried both frames to see if it made a difference. All what happens is that it says step 1 out of 2. It finishes and tells me to analyze again. It doesn't actually make it to step 2 so my footage doesn't change and its getting frustrating. No idea what im doing wrong. HELP PLEASE?

As Rick says, it looks like you didn't update all of your software.
What version of Premiere did you have before?
What version of AE did you have before?
What version of Premiere do you have now?
What version of AE do you have now?
Exact version numbers down to the last decimal, please.
In the future, I'd suggest NOT updating in the middle of important projects.

Time remap not keyframing in Premiere Pro CC

Similar Messages

Maybe you are looking for