Time Series Graph Show Inappropriate Data for Continuous Analysis

Hi All,
I have marked Month as the Chronological Key in my BMM Layer but still I am unable to view the data correctly in my Time Series graph because it shows Inappropriate Data for Continuous Analysis at the time of creating the Graph. Can anybody help me out with the same.
Thanks

What data type is your key? The chronological key is required for the time series formulas (ago etc.).
The time series chart requires a date or datetime data type to work - perhaps a new column with the first of the month/period would help? Regards,
Robret

Similar Messages

  • Error: Inappropriate data for continuous time axis while displaying in Time-series Line in OBIEE

    I wanted to use time series line in my analysis but I couldn't get What kind of data is required for this graph? It shows inappropriate data for continuous time axis. I had total amountmin vertical axis and time(year) in horizontal axis.

    Check this if not helpful then follow 2 links at bottom
    OBIEE - Time Series Conversion Functions : AGO and TODATE | GerardNico.com (BI, OBIEE, OWB, DataWarehouse)
    ~ http://cool-bi.com

  • BPMon alert reporting not showing any data for Trend Analysis

    Hi,
    I have setup BPMon and performed the initial setup for BW reporting. There are alerts being generated by the BPMon setup and the data has been transferred to the 0SM_BPM cube.
    But when I start the Trend Analysis report I dont get any Solution for selection to generate the trend analysis chart.
    I have followed all the steps mentioned in the setup guide. Please suggest any remedy.
    Regards,
    Vishal

    Hi ,
    If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
    Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
    If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
    Hope this helps,
    Aparna Duvvuri

  • How do I add moving averages to my time series graph is there a function on numbers on tr iMac?

    I've created a time series graph on numbers on my iMac but I need to add moving averages. Is there a function an if so where is it and if not is there a way to get around it

    Badunit,
    Here is an example plot, data sorted from most recent data at top of the table...
    You can see the moving average (of 20) is plotted from right to left.
    The Moving Average calculation is now wrong, and should have been calculated and presented from oldest to most recent.
    Here is the same data, with table sorted from oldest data at the top of the table.
    The moving average is also plotted from right to left, and shows the correct Moving Average for the most recent data.
    That is, it is calculated from oldest to most recent, with the last Moving Average data point plotted on "todays" date.
    What I want to see is my table displayed from most recent at the top (the top table), and moving average calculated and displayed as per the bottom graph.
    Edit: So, think about this some more,
    I need an option to tell Numbers to do the Moving Average calculation from the bottom of the table up, not from the top of the table down.

  • LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

    Hi,
    The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
    Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item",  shows an empty space and a colon ":" and an empty box.
    Please let me know if there is any other way to remove the last data fresh without showing the empty space.
    We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
    Thankyou,
    -Sini
    Message was edited by: Sini Kumar

    Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
    first(last(<All InfoProviders under Multi - ROLLUPTIME>))
    It uses the earliest rollup time from the last rolluptime of all the base providers.

  • Regarding Time Series Graph in OBIEE 11g

    Hi,
    I need to create a time-series graph in OBIEE 11g. However, the value for time on the x-axis of the graph automatically comes for days.
    Is there any way to change it to hours or minutes?
    Thanks,
    Naman Misra

    Yes, it shud be a prob. Try using seperate tables for fact n timedim

  • Time series functions are not working for fragmented logical table sources?

    If i remove that fragmented logical table sources, then its working fine.
    if any body know the reason, please let me know.
    thanks and regards,
    krishna

    Hi,
    is because the time series function are not supported for the framentation content, see the content of the oracle support:
    The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
    Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
    Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
    Regards,
    Gianluca

  • How to set the filter on a report to show the data for the Current Month

    Hi all,
    I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
    Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
    Any help would be greatly appreciated!
    Thanks,
    AA

    You need to add a session variable to date fir worked assuming that this is a date field.
    To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

  • How to show specific data for user on redirected page once they logged in

    I and fairly new, but have a general understanding of Dreamweaver. Using CS3 or CS4, how do you get the redirected page after the user logges in to show only the data for that user? I have creater the login page and it works fine but i dont know what needs to be on the redirected page for it to show only the data for the user that just logged in.
    I am not very good with the coding part so if it requires it any help with that would also be helpful.
    thank all.

    I should be able to get the understanding if explained.
    As for scripting i believe its PHP. at lease thats the page i created the login page with.
    As for user-specific information: basiclly there account information.
    As for database i have dreamweaver linked to a MySQL database. it pulls from 2) tables
    1st table has the following: ID - User Names - Password  - account number
    2nd table has the following: ID - account number - names - address - ect
    So basiclly i want when a user loges in for it to redirect them to a page which then only shows the data for that users. if i can link the data the pulls up by the account number that would be ideal
    Thank you Murry

  • Time series chart in null date

    Hi, everyone
    Currently using
    Crystal Reports 2008 Product: 12.7.0.1983
    I make time series chart using a line graph.
    №      X-axis          Y-axis
    1        2014/1/1          100
    2        2014/1/2            20
    3        2014/1/3          null
    4        2014/1/4          500
    Null becomes 0 when I make an upper list a chart.
    I skip a date of null, and may you make a time series chart?
    Regrards,
    Kano

    Hi,　Jamie Wiseman
    Thank you for an answer
    In the case of the above,can you not draw a line in 2014/1/2 and 2014/1/4?

  • IPad shows "No Data" for Videos when I have movies stored.

    Short version:
    I've had lots of issues with downloading movies to my iPad from iTunes.  When it works, the "videos" section under Settings > General > Usage shows "No data" as if it's not reading the storage.  I'll have 6 movies but it shows nothing stored on the iPad.
    Detailed version:
    I'm on my 3rd or 4th try of "Erase all settings and content" without using an iCloud back up.  My 3rd gen iPad will work fine for a month or more after that then start having tons of problems with downloading movies and performace.  I'll set a movie to download from iTunes, go do something else and my iPad will become so slow its unusable.  The downloads will fail but not alert me, they just restart and loop repeatedly.  As of now it's working fine but my third party warranty is running out and I need to decide if somethings really wrong with it or is this an issue with iOS 7.  I've taken it to the genius bar, the guy suggested I plug it into iTunes, download a fresh OS and start over again.  Since then, its been largely fine.  Only one movie failed and tried again then worked.  The performance has been fine but I've been burned by this before...its fine for a while then goes to complete crap.  I've also had the WIFI showing as connected but will not recieve any data until I simply restart and its fine.  This has happened every time I've reset so its not isolated to one glitchy install.
    I've asked for help before but no one has ever replied, if someone can give me a suggestion whether to tough it out or make a claim and pay $50 for a refurbished iPad that would be very helpful.  If you need more details just ask, I've done all I can think of.

    Bump - Can someone please help?

  • 2900 Series Router Shows Wrong Date in Logs

    Hello All,
    Router: 2911 SIP Gateway (C2900-UNIVERSALK9-M)
    IOS Ver: Version 15.2(4)M3
    When I run the "show ntp status" command it is showing the correct date/time in with the NTP data. But when I run "show logg" the SIP messages being logged are showing a time that is 4 hours ahead of the actual time.
        *Current Time I'm writing this is 11:45'ish...
    # show ntp status
    Clock is synchronized, stratum 5, reference is 192.168.xx.x
    nominal freq is 250.0000 Hz, actual freq is 249.9996 Hz, precision is 2**21
    ntp uptime is 836292100 (1/100 of seconds), resolution is 4016
    reference time is D74AE0C1.A5C9079D (11:44:01.647 EDT Tue Jun 17 2014)
    clock offset is 1.4716 msec, root delay is 156.27 msec
    root dispersion is 252.26 msec, peer dispersion is 17.29 msec
    loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000001556 s/s
    system poll interval is 512, last update was 427 sec ago.
    #show logg
    1268129: Jun 17 15:53:41.146: //543358/47CDDA800000/SIP/Msg/ccsipDisplayMsg:
    As you can see the date and time of this last log message in the buffer is showing a time of "15:53:41". Which is about 4 hours ahead of the current time, which makes me think it's a timezone thing, but it looks correct in NTP status... Any idea why the correct time and time zone (*I'm in EST zone) is in NTP status, but incorrect in the log(s)?
    Any ideas how I can fix this?
    Any thoughts or suggestions would be much appreciated.
    Thanks in Advance,
    Matt
     

    Hi,
    https://supportforums.cisco.com/document/24156/router-log-timestamp-entries-are-different-system-clock-when-ntp-configured
    Add the [localtime] option to the service timestamps log command. For example, if the current configuration isservice timestamps log datetime, issue this global configuration command:
    router(config)#service timestamps log datetime localtime
    router(config)#^Z (ctrl z to exit)
    router#write mem
    The times should now be synchronized between the system clock and the log message timestamps.
    Thanks
    "Please rate the post if found useful"

  • Time-series / temporal database - design advice for DWH/OLAP???

    I am in front of task to design some DWH as effectively as it can be - for time series data analysis - are there some special design advices or best practices available? Or can the ordinary DWH/OLAP design concepts be used? I ask this - because I have seen the term 'time series database' in academia literature (but without further references) and also - I have heard the term 'temporal database' (as far as I have heard - it is not just a matter for logging of data changes etc.)
    So - it would be very nice if some can give me some hints about this type design problems?

    Hi Frank,
    Thanks for that - after 8 years of working with Oracle Forms and afterwards the same again with ADF, I still find it hard sometimes when using ADF to understand the best approach to a particular problem - there is so many different ways of doing things/where to put the code/how to call it etc... ! Things seemed so much simplier back in the Forms days !
    Chandra - thanks for the information but this doesn't suit my requirements - I originally went down that path thinking/expecting it to be the holy grail but ran into all sorts of problems as it means that the dates are always being converted into users timezone regardless of whether or not they are creating the transaction or viewing an earlier one. I need the correct "date" to be stored in the database when a user creates/updates a record (for example in California) and this needs to be preserved for other users in different timezones. For example, when a management user in London views that record, the date has got to remain the date that the user entered, and not what the date was in London at the time (eg user entered 14th Feb (23:00) - when London user views it, it must still say 14th Feb even though it was the 15th in London at the time). Global settings like you are using in the adf-config file made this difficult. This is why I went back to stripping all timezone settings back out of the ADF application and relied on database session timezones instead - and when displaying a default date to the user, use the timestamp from the database to ensure the users "date" is displayed.
    Cheers,
    Brent

  • Time of email shows in Date Column, Date is not showing on new emails

    Date is not showing in Date column. Only time is showing.
    I just migrated from OE - Old emails show the time & Date.

    If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

Maybe you are looking for