Time stamp in server logs

Hi,
I am using WLS 8.1 and 9.2, the defalt time stamp format in server logs contains the following format:-
hh:mm:ss, can we change the time stamp to include milliseconds also, if yes then how?
Thanks in Advace,
TK.

That's only for the access log format, not the server log, and it only controls which additional elements can be displayed. It is possible to add custom fields by adding Java code, but again, that's only for the access log.
As I said before, when you asked this before (I don't know where I saw you ask this before), it's really not practical to alter the server log timestamp format. You're better off writing your own log messages with your millisecond timing.

Similar Messages

  • Date and time stamp on dump & log file using EXPDP in HP-UX

    Hi All,
    Can someone help me with the below issue
    O.S Version     HP-UX B.11.31 U ia64
    Oracle DB Version     11.2.0.3.0 , Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    #!/usr/local/bin/bash
    ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_2; export ORACLE_HOME
    PATH=/u01/app/oracle/product/11.2.0/dbhome_2/bin; export PATH
    mydate=`date +%Y_%m_%d_%H_%M_%S`; export mydate
    ORACLE_SID=PD; export ORACLE_SID
    expdp system/0@PD DIRECTORY=prod_exports DUMPFILE=FULL_EXP_PD_${mydate}.
    dmp LOGFILE=FULL_EXP_PD_${mydate}.log compression=all schemas=SYSADM

    991805 wrote:
    Hi
    Thank you very much for your reply. The problem is the time stamp is not coming on my dumpfile
    So what are you getting?
    Works for me:
    #!/bin/bash
    export ORAENV_ASK=NO
    export ORACLE_SID=orcl
    . oraenv
    mydate=`date +%Y_%m_%d_%H_%M_%S`; export mydate
    echo mydate is $mydate
    expdp system/halftrack directory=data_pump_dir dumpfile=full_exp_${mydate}.dmp logfile=full_exp_${mydate}.log schemas=scott
    ls -l /u01/app/oracle/admin/orcl/dpdump
    2014-01-03 15:28:36
    oracle:orcl$ ll
    total 260
    -rwx------ 1 oracle oinstall    300 Jan  3 15:27 doit
    -rw-r----- 1 oracle asmadmin    116 Jan 31  2013 dp.log
    -rw-r----- 1 oracle asmadmin 249856 Jan  3 15:28 full_exp_2014_01_03_15_27_34.dmp
    -rw-r--r-- 1 oracle asmadmin   1974 Jan  3 15:28 full_exp_2014_01_03_15_27_34.log

  • Change date/time layout in server.log to show milliseconds

    Hi,
    I need to debug the JDBC session to find delays in my source.
    I used following to get the JDBC debug info:
    -Dweblogic.Debug=weblogic.JDBCConn,weblogic.JDBCSQL
    My problem is that the layout of the server log file does not show the milliseconds, it shows only the time with seconds.
    e.g:
    ####<Feb 20, 2008 5:33:22 PM CET> <Info> <JDBC> <xxx> <eFlexServer> <main> <<WLS Kernel>> <> <BEA-001132> <Initialized statement cache of size "10" for connection in pool "null".>
    What can I do to see also the milliseconds in the server.lof file?
    Thanks for help.

    Which release of WLS are you using? We had added a timestamp column in the server log from WLS 9.0 onwards that is the raw timestamp of the message in millis.

  • Daqmx Configure Logging with Time Stamp

     Hi All,
    I was wondering if it is possible to use Daqmx Configure Logging to log both data, and a row of the exact time (not a relative one), or at least add the FIRST time and date to the information?
    Thanks,
    Lester

    Hi,
    I got it to work, I just forgot to put in the "Group Name" and "Channel Name" which is necessary to get the properties, I wasn't aware of that.  The info can be seen at http://zone.ni.com/devzone/cda/tut/p/id/3539 . 
    I got the time stamp now, but the resolution is only to seconds.  I tried using the "Format Date/Time String" vi to format the resolution to milliseconds, but that doesn't seem to work because all the decimals after the seconds is just ".000000".  Does TDMS always start at .000 seconds, or does it just not go down to that resolution of timing?
    Thanks for your help,
    Lester

  • Multiple channel data with different time stamp logging

    I have peaks and valleys from multiple channels with different time stamp but I am not able to log to a single file. Any idea on how to do this?
    Attachments:
    Single Point Peak Valley Log.vi ‏53 KB

    Hi Dennis,
    Sorry for that I have modified the VI.
    Because the peak and valley of every channel will occur at different time and I want to log the peak/valley with the time stamp.
    How can I log them on the same file.
    Attachments:
    Single Point Peak Valley Log_Mod.vi ‏53 KB

  • CF6004 Time Stamp log into file

    I am trying to attach the time stamp to the data log that I obtain from
    the NI CF6004. Is there an example that I can look at? I would like to
    print <Time stamp>  <value> in the file. I am sampling
    for multiple channels but one sample value at a time.
    In addition to this, I wanted to generate a plot displaying the value
    of multiple channels with respect to time values. Is it possible?
    Thanks in Advance,
    Karthik

    Hi Karthik,
    Since you are simply taking a single sample at a time and logging it to
    a file that should be relatively easy.  Essentially when you
    create a file you decide how to format the data.  In your case you
    may want to log everything as ASCII data.  If that's the case,
    then you will need to simply use the Get Date/Time String and
    Concatenate that string with a Number converted to a Fractional
    String.  You can see how to do this below:
    I also made sure to make this tab delimited so you could read it in a spreadsheet later.
    There are lots of ways to do what you are trying to do, but this is just the way that I chose.
    Have fun programming the rest of your application,
    Message Edited by Otis on 10-04-2005 01:42 PM
    Otis
    Training and Certification
    Product Support Engineer
    National Instruments
    Attachments:
    726143-Create_Spreadsheet_String.GIF ‏5 KB

  • Where can i get the time stamp in Messaging Multiplexor's log?

    i have modify the loglevel to 10,but i can only find the date informatioin in mmp's log like this:
    20060317 000000 PopProxyAService.cfg (sid 0xd100c4) USER login
    which is the "time" stamp and what's it means?
    i have read the Administration Guide/Reference,but didn't find session abt it.
    where can i get some documents abt how to read the mmp's log file?
    thx!

    bash-2.05# tail -2 /mypath/PopProxy_20060317.log
    20060317 052425 PopProxyAService.cfg (sid 0x6a2044) 12 C->S bytes, 34 S->C bytes in 0 seconds
    20060317 052425 PopProxyAService.cfg (sid 0x6a2044) session end
    bash-2.05# date
    Fri Mar 17 13:24:26 CST 2006but 52425/3600=14.6h=14:36
    that's different, i don't know the reason. does sth. wrong with my mmp?
    thx in advance!
    btw:you are respect because i found lots of result which anwsered by "jay_pleaset" during my search.

  • What logs are effected by "Ignore Time Stamp in Client Messages " rule?

    Hello,
    We're considering whether we can set "Ignore Time Stamp in Client Messages" system rule to false.
    Now we're implementing 2 functionality and use them at the same time.
    One is to change equipment status immediately and log the record to RESOURCE_TIME_LOG table.
    The other is to log equipment status change reason code. That's recorded into PRODUCTION_COMMENT table.
    We already find "Ignore Time Stamp in Client Messages" system rule. It's explained in HELP site like following and plan to set it to false.
    =====
    true: Ignores time stamps from the client during validations for starts, completes, nonconformances, and parametric data. Use this rule in cases such as when the client clock does not match the rest of the system (the client clock is "out of synch").
    false (default): Uses time stamps during validations
    Can override at: site, resource
    =======
    However, we're a little confused becasue above help says the default value is false and the default value in our customer's ME is true. When we try with the rule as true,  these time stamps are sometimes different. (I guess the reason, these tables can't handle smaller time than 1 second.)
    Which ME tables will be effected if we set "Ignore Time Stamp in Client Messages" to false?
    As I mentioned, we'd like to set equal time stamp into There're RESOURCE_TIME_LOG and PRODUCTION_COMMENT.
    In the other hand, we concern the rule may make bad effect with other functionality and/or tables (e.g. PRODUCTION_LOG, ACTIVITY_LOG , and so on).
    Best Regards,
    Takahiro Uesugi

    Takahiro,
    From the beginning the system rule was introduced with default value of Fasle which was described in the online help. However, later the customers started using XML Production Interface more intensively which caused the problem of data inconsistency due to abuse of timestamp fields and sending messages with delays and not in chronological order. The solution in that case was to switch the rule on. And sicne that time the default value has been changed to True.
    So, the system rule should control timestamp fields of XML Production requests where the actual time of activity execution is specified
    Regards,
    Sergiy.

  • Insuffiant logging data and time stamp

    Hi
    Is there any plans in the future on including a time stamp for log entrys and possibly better logging capabilities.
    Thanks
    SF

    Let me put it this way: The people that need proper logging will use proper logging tools and proper routers. Not low-cost mass product consumer routers.
    The argument you state applies to so many things:
    * why does the WRT not allow to configure the packet filter (firewall) freely? It would be useful in many cases for specific filtering.
    * why does the WRT not allow you to properly specify the interface in manually added routers? Sometimes extremely important...
    * why does the WRT only accepts class C networks and small in the LAN (netmask 255.255.255.0 is the biggest one)? This makes it impossible to use it in larger networks.
    * why does the WRT not have wireless bridging or repeater modes? Would be useful for many people that have two WRTs?
    * why does the WRT not have SNMP?
    * why does the WRT have not a remote syslog function?
    * why does the WRT only have 20 port forwardings configurable in the web interface?
    * or to sum up: why does the WRT not have a direct telnet/ssh interface which would allow you to configure anything what is possible through a command line interface?
    There are thousand of questions which you may ask. All of them are certainly legitimate. You find these questions over and over again in forums.
    The thing is: the designer must evaluate which features to add and which not, and how far to expose the added features to the user and how far to limit the user's choices. It is a tradeoff between price, effort, memory, support (if you do offer a feature you must have support trained for it), reliability, etc.
    If there is a feature which is almost never used it is likely to be removed or stripped. If you depend on it you simply have to get another router which, however, may cost a little more... And even, if you find a same priced Netgear or xyz router which does have the logging you require, you will still find that some things don't work on a Netgear that work on a Linksys. It is only because you want the logging at the moment that Netgear seems to be better then Linksys.
    It would be interesting to know which wireless adapter you found that is compatible with Windows 98 and has WPA support...

  • Solaris 10's Container server.log time issue

    We have tow containers on Solaris 10, and there times zones are ok including Global timezone, but one of the container's server.log file time is incorrect, every log is logging time +1hours. We would appreciate if anyone tell us how to correct time of server.log file. Thank you. KMT

    We have tow containers on Solaris 10, and there times zones are ok including Global timezone, but one of the container's server.log file time is incorrect, every log is logging time +1hours. We would appreciate if anyone tell us how to correct time of server.log file. Thank you. KMT

  • Strange time stamp behavior in kernel log

    While I was trying to find out a little hang time during boot process on my laptop I found a strange behavior of the logging time stamp. From the logging beginning it keeps the time for lots of messages. So it´s not possible to benchmark or compare some little tweaks
    Nov 8 13:52:51 workstation Linux version 2.6.13-ARCH (root@Wohnung) (gcc-Version 4.0.3 20051006 (prerelease)) #1 SMP Sun Oct 23 10:51:42 CEST 2005
    Nov 8 13:52:51 workstation BIOS-provided physical RAM map:
    Nov 8 13:52:51 workstation BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Nov 8 13:52:51 workstation BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Nov 8 13:52:51 workstation e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
    Nov 8 13:52:51 workstation ts: Compaq touchscreen protocol output
    Nov 8 13:52:51 workstation Linux agpgart interface v0.101 (c) Dave Jones
    Nov 8 13:52:51 workstation agpgart: Detected an Intel i875 Chipset.
    Nov 8 13:52:51 workstation agpgart: AGP aperture is 64M @ 0xf8000000
    Nov 8 13:52:51 workstation pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Nov 8 13:52:51 workstation shpchp: shpc_init : shpc_cap_offset == 0
    Nov 8 13:52:51 workstation shpchp: shpc_init : shpc_cap_offset == 0
    Nov 8 13:52:51 workstation shpchp: shpc_init : shpc_cap_offset == 0
    Nov 8 13:52:51 workstation shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Nov 8 13:52:52 workstation ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
    Nov 8 13:52:52 workstation PCI: Setting latency timer of device 0000:00:1d.7 to 64
    I use ntpd but this seems not to be related to the use of ntpd. Should be a little bug or missconfiguration. And I have this on several computers and archuser "ise" has it too. Also with different kernel versions. Any idea?

    Andy said it already, my log looks the same. It's even more messages with the same timestamp on my computer. I use the 2.6.14archck kernel from aur  on my laptop and the 2.6.13 from current on my desktop.
    My computers don't hang on startup, only the timestamp is confusing.

  • How to display the time stamp in a data log table

    Hello,
         I want to display data during the data acquisition process. How do I  add the time stamp as one of the column in the 'Result Table' located at bottom left of the example code?
    Thanks,
    Ryan
    Solved!
    Go to Solution.
    Attachments:
    Cycle Analysis.vi ‏229 KB

     I inserted the portion you added to my program and it worked but not exactly the way I want. It added the time and date when I start the data acquision. But I want the time stamp to be shown on every single row. Please see attached image.Thanks.
    Attachments:
    Result.JPG ‏54 KB

  • How to get the most current file based on date and time stamp using SSIS?

    Hello,
    Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
    Thanks
    thx regards dinesh vv

    hi simon
    i excuted this script it is giving error..
       Microsoft SQL Server Integration Services Script Task
       Write scripts using Microsoft Visual C# 2008.
       The ScriptMain is the entry point class of the script.
    using System;
    using System.Data;
    using Microsoft.SqlServer.Dts.Runtime;
    using System.Windows.Forms;
    namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
        [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
        public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
            #region VSTA generated code
            enum ScriptResults
                Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
                Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
            #endregion
            The execution engine calls this method when the task executes.
            To access the object model, use the Dts property. Connections, variables, events,
            and logging features are available as members of the Dts property as shown in the following examples.
            To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
            To post a log entry, call Dts.Log("This is my log text", 999, null);
            To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
            To use the connections collection use something like the following:
            ConnectionManager cm = Dts.Connections.Add("OLEDB");
            cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
            Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
            To open Help, press F1.
            public void Main()
                string file = Dts.Variables["User::FolderName"].Value.ToString();
                string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
                System.IO.FileInfo finf;
                DateTime currentDate = new DateTime();
                string lastFile = string.Empty;
                foreach (string f in files)
                    finf = new System.IO.FileInfo(f);
                    if (finf.CreationTime >= currentDate)
                        currentDate = finf.CreationTime;
                        lastFile = f;
                Dts.Variables["User::LastFile"].Value = lastFile;
                Dts.TaskResult = (int)ScriptResults.Success;
    thx regards dinesh vv

  • Time stamp information in default trace file

    How to check the time stamp in defaulttrace.trc or application.trc files for logs in XI server.
    I have seen following timestamp in above mentioned trace  files. But seem to me, during the shutdown time of server, system put the timestamp in trace file.
    ERROR       gateway shutdown
    TIME        Fri Jun 20 11:01:08 2008
    Except for shutdown time, how the system put the timestamp for other activity of system in the default trace and application trace file??
    Sometime, i need to check the timestamp to get some specific information in default trace file for some system activities.
    is timestamp mentioned in coded form as per following log:
    #1.#36CC34C00F02009B000001B400001FF40004510B33EAB6D3#1215008464352#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCDefaultRequestHand
    ler.handleRequest()#J2EE_GUEST#0##XQA#SAPSYS                          #4869A1FC78690A8DE10000000A2C0AC7#SAPEngine_Application_Thread[impl:3]_51##0#0#Error##P
    lain###java.lang.reflect.InvocationTargetException#
    #1.#36CC34C00F02009B000001B500001FF40004510B33EAB76C#1215008464352#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCDefaultRequestHand
    ler.handleRequest()#J2EE_GUEST#0##XQA#SAPSYS                          #4869A1FC78690A8DE10000000A2C0AC7#SAPEngine_Application_Thread[impl:3]_51##0#0#Error##P
    lain###java.lang.reflect.InvocationTargetException
    Thanks
    Amar

    Hi Amarjit
    The timestamp is noted in unix epoch time (java does use this as well). It is this field:
    #1.#36CC34C00F02009B000001B400001FF40004510B33EAB6D3# 1215008464352 #com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCDefaultRequestHand
    ler.handleRequest()#J2EE_GUEST#0##XQA#SAPSYS
    The first 10 digits are seconds since epoch. The last 3 digits are milisecondes. Converted in human readable format: 07/02/2008 16:21:04.352
    [Unix Time|http://en.wikipedia.org/wiki/Unix_time]
    Damn, i remeber having answered this already here in the forums, but i cannot find the thread anymore myself :-(((
    Best regards
    Michael

  • Time Stamp via Custom Function

    This is such a basic concept for a custom function that I am assuming someone out there has done it already. I have never created a custom function for Essbase, though I have programmed in a variety of languages and I'm assuming getting the current date/time in Java is not exactly rocket science. I have reviewed the docs for creating and registering custom functions and that also appears relatively simple, especially with the examples available.<BR><BR>What I want is a function that returns a Double in the form of a Date/Time that I can retrieve into Excel and display as a Date/Time. We want a simpler, more effective way of time stamping the running of calculations, more effective than combing through the app logs when we need to know if/when a calc ran a week or a month or two ago.<BR><BR>Does anyone have some sample code and/or insights to share on this topic? I would greatly appreciate it if you do.<BR><BR>Thanks,<BR><BR>James

    fyi - I ended up implementing a solution in Perl/Maxl that gives a timestamp to the second in a format that can be retrieved intelligently into Excel. I use the Perl time() function (Unix server) to get the GMT epoch time as a long int. Then I convert it into the floating point DATE format for Windows, with the hard-coded assumption of what time zone my server is in. Then I run a calc from MaxL that sets this value. I build the calc string in Perl and pass it into MaxL. Pretty cool. The calc uses two sub vars, one for the members to fix on and the other for the Scenario to timestamp. This way the perl/maxl is database independent.<BR><BR>Just thought someone might want to know...

Maybe you are looking for

  • Problem linking jsp with javabeans

    Hey guys, I am new at this jsp stuff, but have read a few threads as well as a few tutorials. however, i dont understand why i keep getting this error. any help would be appreciate it! i m currently running it off tomcat 4.1, and the hierarchy that i

  • Plz help in RAC installation

    Hi All, Im Installing Oracle clusterware 10.2.0.1 on Solaris 10..i want to configure two node RAC. but while installing Clusterware software it gets hanged during product Specific Prerequsite checks. the problem is im not getting what can b d reason

  • Z87-GD65 Can't install USB 3.0 Driver from MSI Site

    I have windows 8.1 64bit and i can't install the usb 3.0 driver from the site. It says i do not meet the minimum requirements but after reading them i actually do. This board has so many problems with windows 8/8.1 i just might rollback to windows 7

  • [SOLVED] Flashplugin Does Not Work With Firefox.

    Hi, all. Happy to have just installed Arch, after not using it for a while. It's looking as good as ever, but I can't get Flash to work. I installed Gnash and some things work, but not many. Wanting to be able to use a full Flash implementation, I in

  • Print material document (WE02) automatic when GR

    Hi Guru, I want to let the system automatically print material document output "WE02" when I post Good receipt w/ MIGO 511 Movement type. I use OMJ3 to maintain the condition type WE02/Plant/storage location/outpud device and immediate. Please advise