"Time stamp, Response time and Completion time" in CRM_DNO_MONITOR
Hi,
We have configured Service desk functionality in Solution Manager 4.0.
In CRM_DNO_MONITOR we were able to see all the data except "Time stamp(0), Response time(00:00:00) and Completion time(00:00:00)" of Service desk message.
Kindly let us know, how to configure so that "Time stamp, Response time and Completion time" should be displayed in CRM_DNO_MONITOR.
Best regards,
Bhaskar
Hi,
Do u want this for SLA?
In the service desk you have to assign the date profile to the SLFN transaction type.
For this you can use the standard date profile SLFN_HEADER.
award point if it helps you.
regards,
mahantesh
Similar Messages
-
Time stamps in reports and status are 7hrs off, is there a setting?
Time stamps in reports and status are 7hrs off, is there a regional setting to correct this?
When I run e-load all reports and any other time stamps are 7 hours off. (If I run a test at 9:20am pacific time the e-load shows 4:20pm). The e-test scripts show the correct time if I run those via e-test.
Is there a setting for this?
Thanks!Hi hagstal,
Actually, this is a known issue on Vista.
You need to edit the follwoing file to specify your timezone;
\Empirix\EmpAppServer\bin\JbossService.conf
Please refer to Known Problems section of e-TEST suite Release Notes for more details.
regards -
How to use time stamps en how to make time stamps in Adobe Reader
How to use time stamps en how to make time stamps in Adobe Reader
Did you find a solution? I am having the same problem.
PDF compatibility level is too high. Supported PDF versions are PDF 1.3 and PDF 1.4 (Acrobat 4, 5 and 6). If you are using Acrobat 7 or higher you will need to save your file at a lower PDF compatibility level. -
I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem. Please guide me how to solve this issue.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers, Tom -
Saving a Time Stamp In Memory and retrieving it
I would like to store the time stamp in Flash memory. The memory is 8 bit. So how would I store it in byte format to the memory and retrieve the memory, then put it back together to get the time stamp back...
thanksWhat best you can do is consider some reference time and store the difference i.e. no of seconds. At the time of retrieval also you can do the same.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet -
Two external drives, one for time machine backups and a second (daisy chained firewire) for itunes media folder . Time machine fails to backup the media file saying could not be completed, with no error specified. Steps taken already include reformating drive with media, dragging older media backup file from time machine disc to media disc, and deleting time machine plist and starting time macine preferences upon startup. Media folder is approx 200 gb, mostly ripped dvd movies.
Any help for this??
ThanksTks for the help. Tried to eliminate duplicates. Copy below.
6/11/14 3:07:33.458 PM com.apple.backupd[532]: Found 2332 files (193.66 GB) needing backup
6/11/14 3:07:33.488 PM com.apple.backupd[532]: 219.71 GB required (including padding), 539.32 GB available
6/11/14 3:09:42.200 PM com.apple.backupd[532]: Copied 1201 items (51.5 MB) from volume Macintosh HD. Linked 2894.
6/11/14 3:10:14.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:10:17.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:10:30.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:10:30.072 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/2013 Trip To Kate and Jason - Large 1.m4v to (null)
6/11/14 3:10:44.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:10:57.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:10:57.327 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/2013 Trip To Kate and Jason - Large.m4v to (null)
6/11/14 3:11:09.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:11:22.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:11:22.394 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/IMG_0378.m4v to (null)
6/11/14 3:11:57.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:12:09.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:12:09.872 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/IMG_0398.m4v to (null)
6/11/14 3:12:44.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:12:46.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:13:05.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:13:05.959 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/AAA 2.4.1.ipa to (null)
6/11/14 3:13:23.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:13:46.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:13:51.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:13:51.325 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Air Sharing 3.4.3.ipa to (null)
6/11/14 3:14:18.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:14:21.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:14:48.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:14:51.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:14:51.289 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Angie's List 3.0.2.ipa to (null)
6/11/14 3:15:16.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:15:29.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:15:34.517 PM secd[422]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
6/11/14 3:15:34.517 PM secd[267]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
6/11/14 3:15:34.517 PM secd[267]: securityd_xpc_dictionary_handler EscrowSecurityAl[581] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
6/11/14 3:15:34.517 PM secd[422]: securityd_xpc_dictionary_handler EscrowSecurityAl[580] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
6/11/14 3:15:51.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:15:51.643 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/AP Mobile 6.2.1.ipa to (null)
6/11/14 3:15:54.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:16:07.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:16:19.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:16:19.908 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Apple Store 120269.ipa to (null)
6/11/14 3:16:35.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:16:50.710 PM com.apple.backupd-helper[533]: Not starting scheduled Time Machine backup: Backup already running
6/11/14 3:16:53.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:17:00.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:17:00.552 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Archetype 1.6.2.ipa to (null)
6/11/14 3:17:10.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:17:23.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:17:35.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:17:49.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:18:01.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:18:14.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:18:28.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:18:40.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:19:03.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:19:06.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:19:18.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:19:41.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:19:43.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:19:56.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:20:11.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:20:23.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:20:36.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:20:48.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:21:01.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:21:13.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:21:26.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:21:38.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:21:51.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:22:03.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:22:16.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:22:28.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:22:41.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:22:53.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:23:06.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:23:19.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:23:31.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:23:57.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:24:09.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:24:22.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:24:38.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:24:50.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:25:03.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:25:15.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:25:35.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:25:47.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:25:47.887 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Bloomberg 3.0.ipa to (null)
6/11/14 3:26:01.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:26:13.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:26:13.942 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Calculator 3.4.ipa to (null)
6/11/14 3:26:26.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:26:26.509 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Camera Zoom 3.1.ipa to (null)
6/11/14 3:26:39.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:26:52.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:26:52.108 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Cards 2.0.1.ipa to (null)
6/11/14 3:27:14.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:27:17.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:27:29.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:27:29.606 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Casino 2.5.ipa to (null)
6/11/14 3:27:47.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:28:00.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:28:00.327 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Clear Day 2.6.ipa to (null)
6/11/14 3:28:14.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:28:26.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:28:39.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:28:56.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:29:09.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:29:21.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:29:34.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:29:47.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:29:59.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:30:12.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:30:24.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:30:37.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:30:49.085 PM xpcproxy[629]: assertion failed: 13D65: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
6/11/14 3:30:49.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:30:50.194 PM syncdefaultsd[628]: Fixing push token
6/11/14 3:30:52.507 PM xpcproxy[632]: assertion failed: 13D65: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
6/11/14 3:31:02.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:31:14.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:31:27.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:31:39.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:31:52.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:32:05.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:32:17.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:32:30.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:32:42.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:32:55.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:33:07.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:33:30.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:33:32.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:33:55.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:33:58.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:34:21.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:34:23.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:34:46.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:34:49.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:35:02.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:35:18.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:35:30.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:35:30.676 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Collection HD 1.7.ipa to (null)
6/11/14 3:36:14.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:36:17.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:36:29.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:36:29.651 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/eCardExpress 2.1.ipa to (null)
6/11/14 3:36:52.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:37:14.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:37:17.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:37:30.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:37:52.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:37:55.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:38:07.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:38:30.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:38:32.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:38:45.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:39:08.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:39:10.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:39:23.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:39:46.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:39:48.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:40:01.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:40:23.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:40:26.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:40:38.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:41:01.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:41:04.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:41:16.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:41:39.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:41:41.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:41:54.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:42:17.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:42:19.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:42:32.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:42:54.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:42:57.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:43:09.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:43:32.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:43:34.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:43:47.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:44:10.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:44:12.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:44:25.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:44:48.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:44:50.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:45:03.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:45:25.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:45:28.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:45:40.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:45:55.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:46:07.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:46:20.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:46:32.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:46:45.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:46:58.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:47:10.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:47:23.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:47:35.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:47:48.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:48:00.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:48:13.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:48:26.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:48:38.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:48:51.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:49:03.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:49:16.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:49:21.393 PM WindowServer[128]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280300 device: 0x7f8ef9d04e00 isBackBuffered: 1 numComp: 3 numDisp: 3
6/11/14 3:49:21.731 PM launchservicesd[52]: Application App:"System Preferences" asn:0x0-44044 pid:509 refs=7 @ 0x7fb5b9443730 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x45045 pid=513 "com.apple.prefs.backup.remoteservice"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100019/0x186b3 queue
6/11/14 3:49:21.731 PM WindowServer[128]: [cps/setfront] Failed setting the front application to System Preferences, psn 0x0-0x44044, securitySessionID=0x186b3, err=-13066
6/11/14 3:49:21.733 PM WindowServer[128]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7f8ef9e94e00(2001)
6/11/14 3:49:21.795 PM WindowServer[128]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7f8ef9e94e00(2001)
6/11/14 3:49:29.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:50:48.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:50:48.546 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/GarageBand 1.1.ipa to (null)
6/11/14 3:51:01.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:51:13.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:51:26.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:51:38.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:51:51.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:52:03.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:52:16.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:52:29.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:52:41.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:52:55.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:53:07.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:53:07.747 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Glympse 2.22.444.ipa to (null)
6/11/14 3:53:20.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:53:32.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:53:32.869 PM com.apple.backupd[532]: Stopping backup.
6/11/14 3:53:32.869 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Golf Channel 3.7.2.ipa to (null)
6/11/14 3:53:33.357 PM com.apple.backupd[532]: Copied 127 items (2.24 GB) from volume Media. Linked 0.
6/11/14 3:53:33.376 PM com.apple.backupd[532]: Copy stage failed with error:11
6/11/14 3:53:34.607 PM com.apple.backupd[532]: Backup failed with error 11: 11
6/11/14 3:55:53.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:56:05.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:56:18.000 PM kernel[0]: disk1s2: I/O error.
6/11/14 3:56:33.000 PM kernel[0]: disk1s2: I/O error. -
Need to add date/time stamp to file name without time change creating new files
We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
Attachments:
TimeInFileNameQuestion.jpg 46 KBI need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
Attachments:
FileNameTest.vi 29 KB -
Some users receiving emails with time stamp ahead of their PC time
Hi,
I have a users eho received couple of email ahead of the PC time.the Pc date and time was 28-May-2014 11:45 Am while as in Outlook the Email Was showing Received date and time 28-May-2014 12:43 PM.This is kind of strange as the time of pc and email
server is in Sync with Domain Controller.Any ideas what can be the reason.i will highly appreciate any suggestios as to how to trouble shoot this issue.
Regards
EagleAshHi EagleAsh,
I suggest double check the time in OWA.
I suggest send a test email to see the times in both Outlook and OWA.
If you have a long delay in receiving email messages by using Outlook. However, you receive the email messages timely when you use OWA. This issue occurs because of a deadlock that occurs in email notification threads in the Exchange RPC Client Access service.
More details in the following KB:
Long delay in receiving email messages by using Outlook in an Exchange Server 2010 environment
http://support.microsoft.com/kb/2778100/en-us
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Approval view for working time empty fields 'message' and 'standard time'
Hi experts,
We want to use the SAP-standard program to approve working hours in the Portal. The basic settings are all done, but we still have a problem with some fields.
When we use the SAP-standard approval view SAP_LINE (IMG --> Define approval views) and we go to the portal we see that the fields 'message' and 'standard time' are filled and the hours with a warning are red. When we create an exact copy of view SAP_LINE with the same detailscreen selections, the fields 'message' and 'standard time' are empty and the warning does not turn red.
See the print screen below for an example.
http://img641.imageshack.us/i/printscreenapproveworki.jpg/
Can someone please help me with this?
Thank you in advance.
Kind regards,
BobHi,
We have found the place to change this fields.
To change this fields we had to create an enhancement implementation for BADI definition 'HRCATS_APPR_CUST'
Information for this can also be found in the IMG documentation. -
39L4363D - Unable to set padding time for recording start and end time
Hello,
I have a problem with my 39L4363DG tv (Software 7.1.90.34.01.1).
I'm not able the set padding time for recording start and/or end time as described in the [manual|http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. Both menu item "start padding time" and "end padding time" are disabled?
Can anyone help me and give me an advice on how to solve it?Hi
The padding time can be set for programmed recording.
There is also an scheduling priority
If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule, programmed recording will be performed correctly.
When +Start Padding Time+ and +End Padding Time+ are set, the start time and end time will be the time plus the additional minutes.
If scheduling times overlap, priority will be given to the programmed recording which starts first.
When the programmed recording that started first ends, recording will switch to the next scheduled programme.
At this time, depending on how far the scheduling times overlap, the beginning section of the next scheduled programme may not be recorded. -
Photo shop compatibility vs my semi old computer (first time with photo shop and first time poster)
My computer is unable to run photo shop CC and so on because my computer isn't compatible for being old. I was very sad to find out after purchasing. I did not check the compatibility because again, my computer isn't that old. I'm stessing out until i get a new computer because I really need photoshop for my photography. I think that the CS6 version or even lower would be compatible for my computer until I am able to afford a new one. I run a dell windows 7 I believe. where can i download the older versions of photo shop so i can stop stressing?? thanks
You can get CS6 at the link below. Be sure to follow the VERY IMPORTANT INSTRUCTIONS or it won't work.
CS6 Suite's Tech Specs
http://prodesigntools.com/products/adobe-cs6-system-requirements.html
CS6 Direct Downloads
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Nancy O. -
TS3406 My phone some times not get service and some times can't make call
My phone some shows no service or I can make a call in a minutes it will cut off and says call failure
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424 -
Help to read a table with data source and convert time stamp
Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
RamHi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS TYPE TIMESTAMP,
V_TS_T TYPE CHAR16,
V_YYYY TYPE CHAR04,
V_MM TYPE CHAR02,
V_DD TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM = V_TS_T+4(2).
V_DD = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
/10 V_YYYY,
/10 V_MM,
/10 V_DD,
/10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can - -
How do you date and time stamp pictures and videos using a EOS Rebel T3?
I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.
While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da -
how can i make a graph
y is number(the blue wire)pasing from UDP port,
x is the time stamp.
plus in the same time this graph can display several differenr numbers to compare.
Maybe you are looking for
-
Loop plays in the loop browser but not on the track
Hi, I've been having this problem for a while and reinstalling the whole program doesn't help either. I am running Logic Pro 8.02 and when I click on the loop such as "RnB beat 01" in the loop browser, it plays fine but when I drag it into the track
-
2 sec. of video missing on import from camcorder
Hello, I'm hoping someone has an idea what I can do to fix this problem. I went to the apple store for help and they have never seen this happen. I have a JVC HD camcorder (GZ HD7U). I am importing dance recital footage into imovie. When I import it
-
Next/Back Action script help to stop and start
When I "removeEventListener" for img10, my last image going forward, Next no longer goes forward for 1-9 after going back. I've tried some conditional statements but I'm new to this and nothing is working. I also thought I could do what I did to stop
-
Hi, Suppose if there are 3 Pre-mapping operators (P1,P2,P3) in the Mapping M1, is it possible to sequence the pre-mapping operators to be executed in the Mapping M1. Thanks in Advance, Partha
-
Hello all I am trying to add different icon on different buttons. I have my skin file ready but not sure if I have to create different skin class for different button. It sounds inefficient. Any suggestions? Thanks for the reply... <s:Button id="pass