Time stamp table in fi?

plz any  sent the detail information  i am not get the detail information in forum
1--different time stamp table used in fi extraction?
2--different field under the table and it description   i mean  we need which table in which scenario  and under that table we  have to work in which field?that field  description?

You can get the global settings with respect to FI data source time stamps in BWOM_SETTINGS and BWOM2_TIMEST table at ECC system side.
Recording of all changed FI documents (FI document key, date of last change) in table BWFI_AEDAT.
Check for the below notes
Note 860500 - BW-BCT-FI: Repeating delta extractions
Note 991429 - Minute Based extraction enhancement for 0FI_*_4 extractors
Time stamp mechanism is clearly explained in the below link
Line Item Level Data Extraction for Financial Accounting and Controlling

Similar Messages

  • Time-stamp Table for delta extraction

    Hi SDNers,
    What are the BW Time-stamp Tables for delta extraction in Source System(R/3).
    Thanks,
    Satya

    the tables involved are :
    ROOSPRMS
    ROOSPRMSC
    ROOSPRMSF
    in the second table (ROOSPRMSC) you'll find the timestamp
    M.

  • Time stamp table BWmo2_timest

    HI all can u some one please tell me where to find this table(timestamp) and how do u find out which record has been sent to bw and which is waiting to be loaded..
    k.mohan

    Dear All,
    Recently we encountered with "Time stamp" issue Data siurce
    As in the Data Target DSO loaded successfully with 0records. In PSA the request is also having no records.
    But the BW Delta Queue Maintainance showing uncertain "Time Stamp" for
    the data source. Previously Due to some reason, We deleted all request from DSO  loaded u201C Init without
    data transfer u201D. since then the delta is not correctly loading to the
    target due to the " Time Stamp".
    And the in RSMO the request having below error--
    " Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    We check also the Datasources in Table -
    ROOSPRMSC. We found that The Datasource(OLTPSOURCE) dor respective DS has
    generated & the timestamp is also genrated but some of the fields showing
    blank , Where as one of our working
    Datasource(OLTPSOURCE)  having all details in all fields and
    its Delta is working fine.
    Please can anybody help me to come out this situation as the delta used to load daily
    Regards,
    Taps

  • Time Stamp Tables

    Hi Gurus,
    Can you please tell me where we can check the time stamp for the perticular data sources (For Generic, Business Content, FI and LO Data Sources) and can you answer to my few questions.
    1. For example if we are extracting data using Generic data sources (Delta may be due to date, time, pointer), FI and other CRM Related Data sources etc.... i think we have to refer some tables please confirm.
    2. Can you please tell data flow if we are extracting data using LO Extraction, Generic, FI and CRM related Data sources. i.e., if any Document changes in Source system (might in R/3 or CRM) how exactly the data flows till CDM (RSA7 in Source), once we get data to RSA7 after that i think we need to trigger the info package to get the data to BW Data targets.
    So i need to know the flow till RSA7 (CDM) for different extraction methodologies.
    I know it's take time to answer the above questions. Please can you answer the following questions.
    Millions of thanks in advance..
    Regards,
    Reddi

    HI XYS,
    You can also use the below table for Generic Data Source Delta Management.
    Table - ROOSGENDLM
    The above table uses the fields DELTAID and REPEATID to keep a track of the DELTA.
    Hope this helps.
    Thanks & Regards,
    SH

  • How do i find out the tables (data)effected in a schema after a particular time stamp

    how do i find out the tables (data not structure)effected in a schema after a particular time stamp?
    pls email in [email protected]

    You can't do that. That would be a real security risc.
    /KAj

  • How do i find out the tables effected in a schema after a particular time stamp

    how do i find out the tables effected in a schema after a particular time stamp?
    pls email in [email protected]

    If you are doing a reload every time then you can issue following commands to clear data from cube.
    lmt name to all
    allstat
    clear all from <cubename>prttopvar
    You can wrap above commands in pl sql procedure using dbms_aw.execute package and execute it before cube load starts. Instead of clearing it from whole cube you can clear only from one partition also. Just take a look at clear command in olap DML 10.2 reference.
    Thanks,
    Brijesh
    Edited by: Brijesh Gaur on Aug 10, 2010 6:47 AM

  • How to display the time stamp in a data log table

    Hello,
         I want to display data during the data acquisition process. How do I  add the time stamp as one of the column in the 'Result Table' located at bottom left of the example code?
    Thanks,
    Ryan
    Solved!
    Go to Solution.
    Attachments:
    Cycle Analysis.vi ‏229 KB

     I inserted the portion you added to my program and it worked but not exactly the way I want. It added the time and date when I start the data acquision. But I want the time stamp to be shown on every single row. Please see attached image.Thanks.
    Attachments:
    Result.JPG ‏54 KB

  • Help to read a table with data source and convert time stamp

    Hi Gurus,
      I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
    As follows:
    Enter Data Source Name: 
    Then user enters : 2lis_11_vahdr
    Then out put should be "Data source  :"  10-15-2008.
    The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
    Thanks,
    Ram

    Hi Jayanthi Babu Peruri,
    I tried to extract YEAR, MONTH, DAY separately and using
    EDIT MASK written it.
    Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
    DATA : V_TS      TYPE TIMESTAMP,
           V_TS_T    TYPE CHAR16,
           V_YYYY    TYPE CHAR04,
           V_MM      TYPE CHAR02,
           V_DD      TYPE CHAR02.
    START-OF-SELECTION.
      GET TIME STAMP FIELD V_TS.
      V_TS_T = V_TS.
      CONDENSE V_TS_T.
      V_YYYY = V_TS_T.
      V_MM   = V_TS_T+4(2).
      V_DD   = V_TS_T+6(2).
      V_TS_T(2) = V_MM.
      V_TS_T+2(2) = V_DD.
      V_TS_T+4(4) = V_YYYY.
      SKIP 10.
      WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
              /10 V_YYYY,
              /10 V_MM,
              /10 V_DD,
              /10 V_TS_T USING EDIT MASK '__-__-__________'.
    If you want DATE alone, just declare the length of V_TS_T as 10.
    Regards,
    R.Nagarajan.
    We can -

  • Generic Extractor on DB Table without Date, Time stamp

    Hi all,
    We have requirement of creating a generic extractor on the table which doesnt have date or time stamp in the data field. The only option availabel is to extract from Document numbers.
    And we cant put the extractor mode to "Read from view" because the table contains Currency field which refers to external table for currency key.
    The moment we change the extractor mode from Extraction from view to Extraction from FM the option "Numeric pointer" gets hidden.
    What shall we do in this scenario ?? Pls advice.
    Thanks.
    Regards
    Nimesh

    Hello Tapan, Prakash
    Prakash : Currency key is needed in BW .
    Tapan : I was just trying diff. options i.e. extraction from view and FM . Problem with Generic Extractor is that i dont have any date fields getting updated in the table. The only field that can be used for delta is document number. And Generic extractor only allows date or time stamp option , its not allowing numeric pointer if one reads from FM.
    Regards
    Nimesh

  • CDHDR table entry updation with different Time Stamp

    Hi Experts,
    I'm changing the Contract Partner First Name. The time stamp updation in Change Document Object DEBI is with UTC but the BUPA_BUP Object with Local Time Stamp.
    We want both time stamp with the UTC.
    Time Zone mentioned at SPRO level is UTC.
    Have anyone faced such situation earlier?
    Thanks and Regards,
    Jyoti Shankar

    Jyothi,
    I'm not sure whether this answers your query or not but suggest you to look at these 2 FMs'
    BUS_CUA_VARI_FUNCTION_CONVERT
    BUS_LOCATOR_OKCODE
    Ist FM uses table TBZ4 that uses GUI.
    Probably this is the reason you view object BUPA_BUP in the table with GUI time.
    Rgds
    Rajendra

  • Adding time stamp to table/array

    Hi,
    In my posted VI I am displaying some collected temperature data on a table.  What I am having trouble with is getting the time data to work properly on the table.  When I set the include time data to true, it reads out the time as 1904 etc. I'm not sure if it's possible for me to include a time stamp in my array because when I try to convert a time stamp to a double precision float, the output is still a cluster, and thus cannot be added to the array.  I've also tried to convert the array to a string and concatenate the time stamp on, but the signals input for the table does not accept strings, and because I would eventually like to export this table to a spreadsheet in a file, I don't really want to link the strings to the indicator directly.  I've tried to work with the instrument as well, but when I read time data from it it gives it back in the form of multiple numbers, such as 2008, 8, 28, 13, 30, 31.12 and I can't consolidate it to one number.  Needless to say, I'm a little stumped and am open to suggestions on how to fix this problem, whether its a quick fix or a change in the way I'm trying to record the data.
    Thanks in advance,
    Mike
    Message Edited by mbeenen on 08-28-2007 03:59 PM
    Attachments:
    Automated Thermal Testing Table.vi ‏75 KB

    Here are the sub VI's that I'm using.  The inner while loop is designed so that the loop will halt immediately when stopped, and not have to finish its current iteration, as the iteration period is intended to be rather long.  I may modify the program to have a programmable start/stop time later, but this is at least my temporary solution.  The purpose of the decimate array function is to seperate out the channel label from the actual data so they can be placed as headers in the Excel function.  The intent was likely not clear with the lack of the SubVI's.  Overall, the display table on the front panel is no longer necessary, it was just for me to see how the table was working in the early stages of development.
    The one issue I had with your suggestion is the fact that I the build waveform function only accepts a 1-D array for the waveform input, and with multiple and variable number of channels being used I'm not sure how I could easily manipulate the data I gather into multiple 1-d arrays.
    As always the help is appreciated,
    Mike
    Attachments:
    Write_Table_To_XL_Mod.vi ‏39 KB
    Conf Temp 2.vi ‏37 KB
    EZ Temperature.vi ‏20 KB

  • Using Numbers, I need to time-stamp each line in a table for when it was entered

    I need to time-stamp each line in a table for when it was entered.
    I have a formula which is
    "=IF(F18="","",NOW())"
    it gives me the answer I want, but every time I edit any data in the formula is recalculates the date/time to reflect the most recent edit. I do not want to do this. I am open to any and all solutions including using a script. I do not really know anything about scripts except that they are really easy to use once it's written.
    I have a formula i use in excel but it requires circular references in excel. I tried using this formula in numbers but I get the error that says I cannot reference a cell that references back to the cell i’m inputting the formula into (circular reference. It is easy to use in excel just by limiting the # of iterations in preferences. I can’t seem to find any such preference in numbers. Do you know of one? here is the formula:
    "=IF(D4=”",”",IF(B4=”",NOW(),B4))"
      I use it to time stamp each line in a spreadsheet. It is the only way to keep all the previous line from recalculating everytime I add a new line. If I can’t use this formula, do you know of a way to timestamp each line without having it update everytime I add a line or edit the form?
    Thanks in advance- I know this isn’t exaclty an easy question but I have honestly looked everywhere
    emely

    Hi Emely,
    Check the Insert menu:
    The highlighted item is slightly misnamed, requiring a bit more than a simple selection (or keypress combination*) to act as a time stamp.
    Simply choosing the menu item willproduce the result shown in A2: A time and date value is entered, but only the Date part is displayed.
    Setting the cell format to Date and Time, with both parts displayed (as I've done in column B) does show both parts of the Date and Time value, but as you can see, the time part is set to midnight, as it is in any cell where you have entered only the Date part of a Date and Time value. The date was entered here in the same manner as in A3.
    To enter both the current Date and current Time, the process has a few more steps:
    Select the cell
    Go Insert > Date & Time
    Before confirming the entry, double-click the cell (now showing the Date) to open this small dialogue:
    Click the pop-up menu under Choose Date format:
    Choose the last item in the list.
    Results as shown in A4 and B4 of the table above.
    Regards,
    Barry
    •Regarding the KB shortcut shown: The Mac OS lets you define a KB shortcut for any top-level menu item. The one in the menu is a user-defined keypress combination, made to be easily remembered, not to be physically convenient to use. If doing your own, you may want to try for something eassier to get your fingers on.

  • Any table which has Time stamp when a company code is created

    Hi Guys,
    This is a simple question but there has been no easy answer.
    I have 100 company codes of which I would like to find when the company code went live. Does any one a simple way rather than going by Transport number.
    -Table T001 and T880 does not have any time stamp
    - Transport number is the way but it is very difficult to go through thousands of  transport
    Do let me know if there is any way.
    Thanks,
    R

    Hello,
    Please try Evaluating the Change Logs (if not archived/deleted) using Transaction Code SCU3
    Give the table name as T001 and select the option 'Tables' in the 'Evaluation for' section and give an appropriate time. You will then see the list containing Change Docs for this table.
    Hope this helps.
    With Regards
    VG

  • Update table from SM30 with automatic Time Stamp

    Hi,
    I have created a table maintenance generator for updating table from SM30.
    Now there are fields in my table which are CRETING TIME and CHANGING TIME. Both being TIMESTAMP field (datatype: RSDDTZNTSTMPS).
    Is it possible while user updates records/create new record in the table from SM30, these time stamp field to automatically get populated.
    Also is there any F4 help available for TIMESTAMP field?
    ags.

    Hi,
    You need to do two things inorder to get the desired results.
    1) Go to Screen Layout of the Screen created by table maintenance generator and make the date/time columns to DISPLAY ONLY. This will ensure that user is not able to modify the values at runtime
    2) Write the code in PAI of the Module pool program to populate the values at runtime using Sy-datum/sy-uzeit. (Hint : Search for INSERT/MODIFY statements which will show the location before which you need to write your logic)
    Regards,
    Kshitija

  • How can we define time stamp in rough cut planning profile

    Hi all
    There is no time stamp(From date to date) in Rough cut planning profile and it is just time span (0-5 ,5-10,... workdays) . If I have different capacity for my resource in different intervals how should I define it so that in planning table it can take it to account and show me requirement versus avalilable capacity acoordingly.Note that we are working with repetitive plannig and our resources are lines which have different production rate between each interval.
    Regards
    Babak Bolourchi

    Dear,
    In REM you can use planning table through MF50 for your requirement.
    For time stamp in rough cut planning profile   please refer my reply from this link,
    [Rough cut planning|Rough cut planning profile]
    [Link 2|https://forums.sdn.sap.com/click.jspa?searchID=25236413&messageID=6404039]
    Hope it will help you.
    Regards,
    R.Brahmankar

Maybe you are looking for