Timed Out error while executing BI report in Portal

Hi Experts,
When we are trying to execute a BI report which returns over 9 lac records, it is taking lot of time to get executed and then its throwing the timed out error.
Can anyone help me resolving the issue?
Is this a problem with the performance of Portal server or its just due to the huge amount of records that are being retrieved?
Thank You.
Regards,
Murthy.

I havent got any solution regarding this. But, due to constraint regarding number of open Question in the forum, I am closing this and as there is not other way I am marking it as answered.
Please suggest any other way to close the thread if this is not the right way.
Thank You.

Similar Messages

Read timed out error while executing a web service

hi,
i have a remote funtion module which takes around 31 seconds in AAD (developing enviroment) server which has around 4 select queries,the same RFC is taking around 25 mins in AAT (testing environment) due to more data.
Now when i am releasing the respective web service in AAT it is giving read time out error.
Can anybody please tell me if i can increase the Limit of the execution time at ERP end?
or anyother solution?
Edited by: tatavarthi sai lakshmi divya on Mar 28, 2008 11:19 AM

Hi,
if you execute in foreground ( dialog ) then it's gives you the time out error.
check the value of following parameter using tcode RZ11
rdisp/max_wprun_time
if you want to change the value run tcode RZ10 select instance profile and change the value of parameter then save and activate instance profile.
Restart the sap application server.
regards,
kausahl

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Request timed out.- Error while opening a item in Blog

Hi,
   We have a blog in our share point portal which was running properly before few days.
We get Request Timed out error while opening an item in the blog. The list contains about
   3500 items
[HttpException (0x80004005): Request timed out.]
We were able to create a new item but not able to view the item.
When we check the server SQLSERVR.EXE takes more than 90% of the CPU Usage.
Please let me know how to resolve this issue.
Thanks,
Vanitha

Hi,
According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
to preform well. SQL requires 2GB RAM for optimum performance.
Messages like this are mainly due to lack of RAM Allocation.
Best Regards
David Hu

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Connection Timed Out error while saving messages in Solution Database

Dear Experts,
I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu May 14 15:11:24 2009
Module: icxxthr.c
Line: 2698
Server: Host_<SID>_<Sys no>
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Regards,
Babu

Hi Babu,
you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
Service Change -> increase value for "Max. Processing Time"
In case your application still times out you should see the changed value displayed.
Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
Best regards,
Andreas

Error while executing a report

Hi ,
I have a problem while executing a report to brower as ..
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form REP_QUELL_MOVE_01-01-
The same query is execting in DEV, but it is not working in QA, it is showing the above message. Can you please send me some idea, how to solve this problem.
In my reporting i am using 2 keyfigures, 2 formulae, 2 time char and 1 char.
Thanks and Regards
Rajesh

Hello,
Open the query in query designer and check the query and see wht detailed error message you get.
Regds,
Shashank

Timed Out Error while waiting for response from DB Procedure

Hi Gurus,
We are encountering a problem in our production environment. The system is implemented using AIA foundation pack 2.5 on SOA suite 10.1.3.4.
We have a BPEL process A which calls an ESB Service which inturn calls BPEL Process B. In process B, we have a DB procedure call which waits for a response from
a DB procedure. The procedure doesn't reply on time and Process B remains in waiting state to get the response from DB Procedure wherein Process A errors out by showing as "Timed Out Error".
This issue is intermittent and we have already increased transaction-time outs in transaction-manager.xml to 7200 and ejb-orion-jar.xml to 3600.
When we encountered this problem, we found out that there are too many connections open and when we bounced the server, everything was restored to nornal but as it is a production env. we can't do it over and over again.
We have 2 nodes each having max connections as 100 and min. as 0.
Is there a limit to max no. of connections or can we do something in DB side to ensure that it doesn't happen again ?
Please suggest.
Thanks,
Vikas Manchanda

Hi Gurus,
We are encountering a problem in our production environment. The system is implemented using AIA foundation pack 2.5 on SOA suite 10.1.3.4.
We have a BPEL process A which calls an ESB Service which inturn calls BPEL Process B. In process B, we have a DB procedure call which waits for a response from
a DB procedure. The procedure doesn't reply on time and Process B remains in waiting state to get the response from DB Procedure wherein Process A errors out by showing as "Timed Out Error".
This issue is intermittent and we have already increased transaction-time outs in transaction-manager.xml to 7200 and ejb-orion-jar.xml to 3600.
When we encountered this problem, we found out that there are too many connections open and when we bounced the server, everything was restored to nornal but as it is a production env. we can't do it over and over again.
We have 2 nodes each having max connections as 100 and min. as 0.
Is there a limit to max no. of connections or can we do something in DB side to ensure that it doesn't happen again ?
Please suggest.
Thanks,
Vikas Manchanda

Read timed out error while opening monitor tab in DataServices

Hello all,
Am getting a "Read timed out" error when I try to open the monitor tab in DataServices admin console for a few jobs only. For several jobs, monitor tab opens just fine. But for a few it doesnt and throws the error mentioned above. Mostly this behaviour is noticed with a job having several workflows and dataflows.
The version of DS used is 12.1.0.0. Tried to gather some info on this issue, but couldnt find any relevant thread. Would really appreciate if anyone could help me with it.
Regards,
Prem

check the following post
http://www.forumtopics.com/busobj/viewtopic.php?t=148213

"timed out" error while transferring music and videos

Hi,
I use iTunes 8.1.0.52. When i connect iPhone and start transferring music or videos it simply throws out "device timed out" error. What do i do? do i have a solution for this problem? My iPhone is updated with latest software 2.2. Any suggestions?

try using a different USB port on your computer. i've seen this before in the forum, and the problem was a bad USB port.
are you plugging in directly to your computer, or through a USB hub? from what i've seen, you can not use a USB hub.

Require help to solve Connection timed out error while reload initial data

Dear Developers,
I have installed SAP NetWeaver and SAP ME SDK 2.0 on my laptop and working from offshore, the SAP ME WIP and ODS database is situated at onsite. The installation is working fine, however, after developing Activity Hooks, at the step where I need to Reload Initial Data for the Site where I want the Activity to be used I get the below error message:
500 Connection timed out
Error: -5
Version: 7011
Component: ICM
Date/Time: Wed Mar 07 12:37:38 2012
Module: icxxthr.c
Line: 4184
Server: <laptop_hostname>_<SID>_00
Error Tag: {-}
Detail: Connection to partner timed out after 600s
© 2001-2009, SAP AG
How to find out what is causing this error? When I use the hostname of the onsite SAP ME application pointing to the same database, Reload Initial Data works fine. I need to reload initial data from laptop SAP ME application only, beacause the activity hook classes reside on my laptop, before I send the SAPME.sca files for common server build.

Hello,
Please try to increase PROCTIMEOUT ICM parameter for the corresponding server\port. If it does not help, please, check NW default traces for ME errors and share your results with us.
Best regards,
Alex.

Portal Runtime Error while accessing BW reports through portal

Hi,
We are facing portal runtime error(An exception occurred while processing your request. Please send the exception id to your portal administrator) while accessing BI reports through portal frequently.
We are unable to trace the error in the 'default trace' log file and although refreshing the cache solves this issue, it is difficult to explain this to every user individually.
After many such errors, We found one log entry, which we are now not yet sure if it is relevant. The error states:
1.
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-ext-sid=<ID[url_ENCODE]>&Language=<Request.Language>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<Authentication>&<Report>&<BusinessParameters>'; the problem occured at position 230. Cannot process expression <LAF.AllVersions>
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:540)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:423)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Content pass of Application Integrator failed.
Component Name:       'com.sap.portal.appintegrator.sap.BWReport',
Context Name (iView): <iview name location>
Top Layer:            'BWReport/TopLayer',
Producer ID (FPN):    'null',
System Alias:         'Sap_bw',
2.
The cluster server element 111111 is not added in the EP cluster context,
   because prtbridge on 111111 is stopped or not yet started (maybe the server is starting or shuting down).
Please suggest us if the above logs are related to the issue or not
Kindly provide us any inputs or solutions.

Hi All,
We are also having similiar type of error in our portal.
com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge
#######SAPEngine_System_Thread[impl:5]_13##0#0#Error#1#/System/Server#Plain###
The cluster server element 125898350 is not added in the EP cluster context,
   because prtbridge on 125898350 is stopped or not yet started
(maybe the server is starting or shuting down).
We have implemented the FPN using RRA.
This error comes only for few users when they navigate in Portal. After clearing the cache, it works for all. Kindly help us to resolve this issue.
Regards,
Venkatesh

Timed out error when running a report

The error is:
"Request timed out because there has been no reply from the server in 600000 ms"
Does anybody have any idea how to solve the issue?
The following is more info on the report:
Report has 8 subreports and data set is around 7MB size
We generated another report with 83MB of data and this report doesn't have any subreports and its running completely.
using Crystal reports XI r2 SP3, Visual studio 9, BOXI server SP3 and using XML as data source.
Any help would be appreciated.
The following is the Stack Trace:
System.Exception was unhandled by user code
Message="Load report failed."
Source="CrystalDecisions.CrystalReports.Engine"
StackTrace:
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, EnterpriseSession enterpriseSession)
       at Covance.ED.Framework.Reporting.Workflow.CreateReportOutputActivity.executeCrystalReport_ExecuteCode(Object sender, EventArgs e) in C:\Source\TR\Components\Framework\Covance.ED.Framework.Reporting\Workflow\CreateReportOutputActivity.cs:line 189
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
InnerException: System.Runtime.InteropServices.COMException
       Message="Failed to load info object."
       Source="Analysis Server"
       ErrorCode=-2147467259
       StackTrace:
            at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       InnerException:

There are a few timeouts that could come into play here. One is a Corba timeout.
You'll want to adjust your ConnectionTimeout in your regisry under HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECTS\Suite 11.5\CER. The default value is 600000. Try doubling it to 1200000.
You may also want to increase your httpExecution timeout as well in your web.config file.
http://msdn.microsoft.com/en-us/library/e1f13641.aspx

Error while executing webi report

Hello Experts,
I created a universe using SAP BI query. Now I am using this query to create webi report. so while creating webi report i select 1 characteristics and 1 key figure from the universe and putting them on result objects pane.
After putting these object when I execute the report i get following error:
Database error: SOFA Driver : Catastrophic failure. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
Can anyone suggest me how to resolve this error?
Regards,
Nirav Shah

yes, underlying queries work perfectly fine. Universe are created without any issue. However,in WebI, when I drag the any TWO objects under any class or even combination of one object and one measurement key, as soon as I refresh query, the error pops up. If there is JUST ONE object, no issue at all. I can see the data.
Mean...if there is more than one object in any WebI report, the error is thrown by WebI report. And this happens only while running WebI against SAP BW/BI, query or against any InfoCube.
Thanks

Timed Out error while executing BI report in Portal

Similar Messages

Maybe you are looking for