Timeline Saying Clips are Offline, when Browser Shows Clips to be OK

I have a few clips in my timeline that fews the OFFLINE WINDOW. Yet when I check my browser, the clips have no offline slash and can be seen as edited in the canvas. How do I make the clips show normally on the timeline. Also clips are trying to show the actual clip photo, bu only show half. And yes I have tried reconnecting the media, does not work.
Thanks

Trash your thumbnail cache file... it's location is set in the Scratch Disk Settings near the bottom of the window if you don't know where you've put them... just trash them and the offline media thumbnails will go away. It's caused by opening a project file without the media online, then saving it. The thumbnails don't get rewritten with the proper pictures when you do that.
Jerry

Similar Messages

When I try to view my photos it says they are offline.

When I try to open my pictures it says they are offline, how do I correct this?

You could also try the following so see if you can recover your photos. If they are in the Masters or Original folder of your library but can't be recovered by the conventional rebuild/repair procedures perhaps this method will get them for you.
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

Final cut pro x keeps on saying files are full when trying to export when their not ?

Hi
Final cut pro x keeps on saying files are full when i'm trying to export when they are not full and also what setting do i export them on for a small quicktime?

The preset that will give you the smallest file is email and you will have 3 choices of size. Not sure what you consider small, but also take a look at Apple Device.
Your error message is Files are Full or DIsk is Full? Will need more info about your system specs, the format of the clips you're using and your project settings.
Russ

Ipad saying earphones are in when they are not

Can't get volume ipad saying earphones are in when they are not

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

Identifying which clips are used in browser

I am learning FCP for the first time but I am extremely familiar with editing video on a PC. My version of FCP is 6.0.6. I really want a way to see in the browser which clips I have used in a sequence. I know I could manually mark each take by using a label but that is a huge time waste with hundreds of clips in my program. Show duplicate frames is helpful in figuring out if I have used a shot before but I want to avoid having to ever even put the same shot into the time line.
If I have 100 shots and I have used 75, I want a fast way to see the other 25 shots in my browser so I don't waist time trying every shot to see if there are duplicated frames in my time line. And I don't want to have to manually change a label every time I edit in a shot for the first time.
Premier does this so much better.
Thank you.

Thank you but I know how to enable "Show Duplicate Frames." I want to avoid needing to use this in the first place.
In Premier's equivalent to the browser window we have a field labeled "used" and it's checked if we have used the clip in the time line / sequence. Then I can instantly see which clips I have pulled nothing from.
Yes I could edit my piece and use the "Show Duplicate Frames" to find out I used 30 clips twice or more in a montage. I want to avoid putting the clips into the sequence it first place so I don't waste time. I also don't want to waste time editing a clip to the time line just to find out if I have used it before with the Show Duplicate Frames setting enabled. That wasts lots of time when you have a large number of clips. I don't want to try say 50 clips in the time line to find the 1 or 2 that I haven't already used.
I want to be able to see what clips are used in any sequence from within the browser so I can quickly see what's left. This is not Show Duplicate Frames. Again I understand what that setting does and it is helpful but not what I am talking about.
Thank you,
David

I use Microsoft Outlook for email, and every day, dozens and dozens of times per day, a blank white Firefox window pops up and says "There are no items to show in this view."

That’s all it says in the whole window that opens up. There doesn’t seem to be a specific thing I do that makes it happen and it doesn’t happen every single time I have it open, but pretty close. It seems to happen (most of the time) when I click on the “Today” or “Yesterday” (ect) tabs that organize the emails. But again, it doesn’t happen every time I do this – maybe 8 out of 10 times? It also does it when I just open my Outlook screen to look at it before I even do anything, and sometimes it just does it without even touching it. Also, pretty much every time I send an email it opens a couple pages up. It also doesn’t happen just once, it will open sometimes 5 – 10 of the same screen all at once. My IT person at work suggested deleting Firefox to see if it would stop and it didn't, it would just open up a window saying you have no Firefox so download it. I re-installed Firefox and it still does the same thing – mostly – except now it asks if I want to download the file instead of just opening that white Firefox screen. If I click yes it opens the same screen but it will still open sometimes 5 of those asking if I want to download it.

Microsoft published some articles about this error last year. It might not be the only cause, but can you forward it to your IT for consideration?
[http://support.microsoft.com/kb/2559926 "There are no items to show in this view." error message when you try to view a folder by using Outlook in an Exchange Server 2010 environment] (Group by)
[http://support.microsoft.com/kb/2500648 "There are no items to show in this view." error message when you try to view a folder in Outlook in an Exchange Server 2010 environment] (Sort by Categories)
Edit: As a short-term workaround, what happens if you make IE your default browser? You can still use Firefox as your primary browser, but of course links and shortcuts from other applications or the desktop will open in IE.

Flash CS4: why movie clips are static when exporting to video formats ?

Does anyone know why the movie clips are non animated when I export my flash animation into a video format ?
Please see the next flash example I made: (4 KB)
http://dl.dropbox.com/u/22717206/Flash/flash_movieclip.swf
And now see how it looks like once exported into video format: (160 KB)
http://dl.dropbox.com/u/22717206/Flash/Video_movieclip.avi

You must need a suitable codec for that like DivX codec, it will also import the nested movieclip animations. otherwise whatever you have on the main timeline is exported for avi. you will get the codec on the export settings for avi.
Also check this link:
http://www.adobe.com/devnet/flash/articles/flash_to_video.html

I can't update certain apps they say they are open when I made sure they are closed

I can't update certain apps on my iPad and also iPhone, they say they are open but I made sure they are closed. I still get updates which I can download , but these certain apps seem to just say open. So when you touch open it goes right to the app, so I close it and try again and it still says open, I even tried holding down the power button and rebooting with no success.

On iOS 7 apps that you've updated remain in the Updates tab in the App Store app for a couple of weeks before they disappear off it - if they show 'Open' against them (which will take you into the app) then that indicates that you've already updated them (they should have a grey bar above them with 'Updated 8 November 2013' or similar), if there is an available update for them then they will show 'Update' against them instead e.g.

Photosmart D110 saying it is offline when it is not.

My printer is saying it is offline on both my macbook and my imac (both of which are running Mac OS X Lion 10.7.5) but the printer is not really offline for any of my other devices, it is working for my iphone. It also has no time printing if you have it connected by cable, but the point is I got a wireless printer for a reason and it is refusing to print via either computers. I have restarted it, restarted the computers, and restarted the router. I have also deleted the printer and reinstalled on both computers, still is says offline. I need to print and need answers.

I would take a look at the document below.
Printer Offline.
Let me know how it goes.

Why does my printer say it's offline when I restart it or shut it down???

I own a Brother HL-2270DW series printer it is plugged into a pc but I when I say it says it is offline I mean on my laptop It works fine on my pc but not my laptop. I am using windows 7.

Hi, this is an HP printer forum. Please contact Brother for assistance with your Brother printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My friend says I'm offline when I sign into iChat.

We can still IM each other but her buddy list says I'm offline. I checked to see if I'm invisible and I'm not. Help?

HI,
Mostly this appears to be happening in iChat 6 or Message beta.
In both these versions the default is to have all the Buddy Lists you have display in a combined list.
There is a setting in the App Menu > Preferences > General Section that can be used (unticked) to undo this.
Then it is a question of checking the Status drop down in each Buddy List to see if 1) one of them is set to Invisible and 2) that the option to make all Statuses the same is not selected in one of them.
By Default only AIM and Yahoo accounts can be Invisible (AIM included any name valid as an AIM Login)
when the "Set Same Status..." is set then even Jabber (Google and FaceBook included) can "appear" to be set to Invisible.
There is anecdotal evidence that in some cases what is set for one Buddy list "Crosses over" to other when it shouldn't.
An example of this is that if you set "Send as I type" in the Bonjour Account in effects the Yahoo account you may have.
Other causes
These mainly include Setting the status via another Login that has not been logged out for some reason or is logged in in such a way that that is it overriding the current login.
8:01 PM Monday; June 4, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Changed over to email, when adding contacts to email, says they are invalid when they are not.

Since changing over to the new improved email system, so I could be more organized, when I try and put my contacts in, it says they are invalid and doesn't recognize them. When in fact there are no spelling errors, the emails are typed in correctly, with correct characters. I am so frustrated. Any answers?

There are no known issues with the creating of contacts. We would like to see the methodology of input as well as the content you are putting in. I have sent you a private message so we can work further on this
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Problem with clip area occurred when table content is transited

Platform: JavaFX 1.2.1.
Hi all
<b>Preface</b>: I created my own table because the cell content should be not standart: buttons, progress bars, etc...and text as well.
There is no standart decision for this and simple there is no table control in JavaFx as well :) (swing JTable in a SwingComponent wrap
doesn't fix the problem - only combo box, check box, text box can be placed into a cell). So, I did the following: I created a sequence
of instances of the Group class. Each instance represents one cell of the table. I put a rectangle (Rectangle class) as a cell visualization
and other controls(buttons, progress bars, text, etc. as a cell content) to each Group instance (cell). All cells in the sequence are located
in rows and columns as in a usual table. and I put this sequence of cells to one common Group. The whole area of all rows and columns is large
so I use the clip variable of the Group class (common Group) and two scrollbars (vertical and horizontal) to transit the rows and
columns. It's simple thing as in a usual table.
<b>Problem description</b>: when I transit a thumb of a scrollbar (whatever horizontal or vertical) part of each border cells appear out of common
Group clip area, i.e. that part of each border cell (as on the left, rigth side of the clip area for horizontal scrollbar so as on the top, botton
side of the clip area for vertical scrollbar) that should be disapeared is appeared over other GUI controls located near this table. I tried to
use ClipView - the problem is reproduced as well. Screenshot here:
Initial state:
http://foto.nnov.ru/psh500/0/86/51/e1/4e/a0/ae/0bd8ef7ebf233614.png
Screenshots with bugs:
http://foto.nnov.ru/psh500/0/f8/1c/28/77/b5/79/f53bbc4fd8ba8158.png
http://foto.nnov.ru/psh500/0/3a/95/c3/6c/0e/4f/9aff2e16a544bb37.png
Help please.
Thanks in advance!

Code is simple. There are two classes: TableColumn.fx and Table.fx. And as an example of use: Main.fx
* TableColumn.fx
package mytabletest;
import javafx.scene.Group;
public class TableColumn {
    public var name: String;
    public var width: Number;
    public var rows: Group[];
* Table.fx
package mytabletest;
import javafx.scene.CustomNode;
import javafx.scene.Group;
import javafx.scene.Node;
import javafx.scene.control.ScrollBar;
import javafx.scene.layout.LayoutInfo;
import javafx.scene.shape.Rectangle;
import javafx.scene.text.Text;
import javafx.scene.text.TextOrigin;
import javafx.scene.transform.Translate;
import javafx.scene.paint.Color;
public class Table extends CustomNode {
    // Table width
    public var width:Number;
    // Table height
    public var height:Number;
    // Table row hight
    public var rowHeight:Number = 25;
    // Space between two cells
    public var rowMargin:Number = 2;
    var tableContent : Group;
    // Columns
    var columns: TableColumn [];
    var scrollBarWidth: Number = 8;
    // Cliping area: visible active area of the table
    var clipWidth = bind width - scrollBarWidth;
    var clipHeight = bind height - scrollBarWidth;
    // Vertical scrollbar
    var vScrollBar: ScrollBar = ScrollBar {
        height: bind clipHeight
        clickToPosition: true
        min: 0
        max: 5
        vertical: true
    // Horizontal scrollbar
    var hScrollBar: ScrollBar = ScrollBar {
        width: bind clipWidth
        clickToPosition: true
        min: 0
        max: 3
        vertical: false
    // Scroll bars triggers to transit table content in X and Y coordinates
    var vScrollBarTrigger = bind vScrollBar.value on replace {
        (tableContent.content[0] as Group).translateY =
            - vScrollBar.value * (rowHeight + rowMargin);
    var hScrollBarTrigger = bind hScrollBar.value on replace {
        (tableContent.content[0] as Group).translateX =
            - hScrollBar.value * clipWidth / getNumOfColumns();
    public override function create():Node {
        return Group {
            content: [
                // Scrollbars
                Group {
                    translateX: bind clipWidth
                    content: [vScrollBar]
                Group {
                    translateY: bind clipHeight
                    content: [hScrollBar]
                tableContent = Group {
                    clip:
                        Rectangle {
                            width: clipWidth
                            height: clipHeight
                    content: [Group{}]
    * Calculates locations for the table columns
    function calcLocations(columns:TableColumn[], e:Integer) {
        var position : Number = 0;
        if (getNumOfColumns() > 0) {
            for (i in [0..e - 1]) {
                position += columns.width;
return position;
* Adds row to the table
* @param obj sequence of objects to be added to a new row
public function addRow(obj: Group[]): Boolean {
var cell: Group;
var row = getNumOfRows() + 1;
var isEven = row mod 2 == 0;
for (column in columns){
cell = Group {
transforms: Translate.translate(
calcLocations(columns, indexof column) + indexof column * rowMargin,
((rowHeight + rowMargin) * row))
clip:
Rectangle {
width: column.width
height: rowHeight
content: bind [
Rectangle {
width: column.width
height: rowHeight
fill: Color.rgb(147, 0, 255)
Group {
content: [obj[indexof column]]
layoutInfo: LayoutInfo {
width : column.width
height: rowHeight
insert cell into column.rows;
insert cell into (tableContent.content[0] as Group).content;
return true;
* Sets columns to the table.
public function addColumn(name: String, width: Number): Void {
// Check if the name is an empty string then column name will be the
// following: "Column{i}" where i is a number of columns (zero based)
var columnName : String = if(name == "") "Column{getNumOfColumns()}" else name;
var column: TableColumn = TableColumn {
name: columnName
width: width
//Add column head
var cell: Group;
cell = Group {
var rec: Rectangle;
transforms: Translate.translate(
calcLocations(columns, getNumOfColumns()) + getNumOfColumns() * rowMargin, 0)
clip:
Rectangle {
width: width
height: rowHeight
content: bind [
rec = Rectangle {
width: width
height: rowHeight
Group {
var node : Node = Text {
textOrigin: TextOrigin.TOP
content: columnName
transforms: bind
Translate.translate(width / 2 - node.boundsInLocal.width / 2,
rowHeight / 2 - node.boundsInLocal.height / 2 + 2)
content: [node]
insert cell into column.rows;
insert cell into (tableContent.content[0] as Group).content;
insert column into columns;
* Returns number of rows
public function getNumOfRows(): Integer {
if(sizeof columns > 0) {
return sizeof columns[0].rows - 1; // The first cell is a column title
else {
return 0;
* Returns number of columns
public function getNumOfColumns(): Integer {
return sizeof columns;
* Main.fx
package mytabletest;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.Group;
* @author Naight
var table : Table = Table {
translateX: 100
translateY: 100
width: 200
height: 200
Stage {
title: "Application title"
width: 400
height: 400
scene: Scene {
content: [table]
table.addColumn("Column1", 100);
table.addColumn("Column2", 100);
table.addColumn("Column3", 100);
for(i in [0..9])
table.addRow([Group{}, Group{}, Group{}]);

How do I get images from LR to windows file when it is saying they are offline or missing?

I loaded pictures to LR where I made some changes. They were jpegs. I deleted some in LR that went to recycle bin. Originals were in a windows file 2009-11-08. Since I did not see the LR changes in the windows pictures I decided to transfer LR images to the original file and opted to overwrite originals, might be a fatal mistake as it turns out, I am new to this. So now the originals are missing from the windows file but the images are still in lightroom but I cannot do anything with them other than view them in the library or slide show. I would like to put them back in the windows file for uploading to my blog and I am really hoping they are not missing as it tells me in lightroom. Can't see why they are missing if I am viewing them. Did try suggestion from support about adding parent file, then right clicking and locate can't remember exact procedure but I couldn't get it to work. I need help?? Thanks.

When exporting do not over write original files in the folder where your imported files are located. In fact I understood that LR had actually disabled this in more recent versions to prevent you doing exactly what you have done. So ensure you are running the latest version of the software (help, check for updates). over writing should only be done to folders of exported images (not those in the database). The whole point of LR is non destructive processing, that is your original files remain un changed by LR and changes are only applied to exported images.
What you need to do now is not re import but synchronise the folder. Right click (cttr click) on the affected folder in Lightroom and select synchronise folder. Check all the boxes and go ahead. This will import your exported images..as you have over written your originals unless you have backed them up then they are gone. If the are backed up, then move them into the folder using the OS file browser before synchronising.

Trying to combine folders within LR4 from two separate drives without creating duplicates--sometimes it won't let me transfer to destination folder because it says files are there when they are not; other times, allows duplicates to transfer

Trying to consolidate 261K+ of images within LR4 between two drives. Someone who was "helping" me with my Library in LR4 for some reason took some but not all of the file folders from my main backup drive (M) and duplicated them onto a partitioned hard drive (E) directly on the computer. The duplication is huge, so I am trying to condense them all back onto the original backup drive M, particularly since I believe there are also folders on the partitioned backup drive E that do not appear on the main one M, and there are many more file folders on M that are not on E, so that is the destination drive.
CONSOLIDATION: When I try to drag either the file folders or the individual files from the duplicate drive E to the original drive M to combine the two drives since the folders in many cases for some reason are not identical, sometimes LR4 says the files already exist when they clearly don't. Other times it allows me to drag and drop all files, even if the exact duplicates are already on the destination drive, thereby doubling the number of files per image and creating more duplicates. Right now I am opening each file folder on the duplicate drive E, looking at what extensions and file names are there, scrolling to the original drive, making sure they appear to be identical, then going back to the duplicate drive E, deleting the images in the folder, removing the folder, and moving to the next folder on the duplicate drive E. *There has got to be a simpler way.*
CONSOLIDATION APPROACH: I did start to create file folders names A, B, C and group file folders under them to reduce clutter, since those header folders can be closed down when not in use, but now I am wondering if I should have done that alphabetization to the main backup drive rather than to the partitioned backup drive.
My goal is to consolidate the two drives down to one, delete as many images along the way that I know I will never miss, then backup the catalog and export it to an external drive and then copy that to yet another drive for offside storage. Does this sound like the proper plan? Last time it took almost 24 hours and over a terabyte to export the catalog.
DUPLICATION: I also have many file folders that have the exact same image in them. One portfolio image may actually be in eight different folders, with the exact file, file name, file size, and date, even though I always have checked "no duplicates on import," How can this be? What is the best way to sort through duplicates? Why are the files in some of the duplicate folders not in numerical order? If I do a search and call up a file # and find 15 duplicates, the only way I can find where those duplicates reside is to take each duplicate, right click to Locate Folder in Library, then once I find it, I have to go back to All Photographs>Text.search for file #, go to the second duplicate, right click to Locate Folder in Library, then once I find it, I have to do it all again. Is there a simpler way to see all the occurrences in their respective folder locations at once?
SEARCH BY FILE FOLDER NAME ONLY: I also find I can't search for a file using a folder name (for example, "John_Doe"). I can only search by file #, keywords, or camera/lens/date, etc. Why will it not work to use All Photographs>Text>search for Doe? In other words, if I didn't keyword the individual files as John Doe, I can't search for them by that moniker.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
FOLDER LIST PRINTOUT: Is there a way to print out the Folder list (other than a screen shot)? I have so many file folders on each drive since I sort not by Year/Month/Date but by subject. It makes trying to compare duplicate folders quite unwieldy.
SLOW RESPONSE: And finally, as though that weren't enough, why does LR4 continually blink to a white screen after each keystroke? Takes forever just to be able to click through images, view info after hovering, etc. All other programs are closed down and the operating system shows very little memory being used.

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

Timeline Saying Clips are Offline, when Browser Shows Clips to be OK

Similar Messages

Maybe you are looking for