Timemachine wont backup, gets this message
This backup is too large for the backup volume. The backup requires 129.4 GB but only 329.3 GB are available.
***?
Dave,
Try run disk utility on the backup volume.
Similar Messages
-
My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html -
For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html -
When I turn on my iPad I get this message: "iCloud Backup - This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi." It has rendered my iPad useless as I cannot even unlock it, and it shuts down within a few seconds of turning it on. Is there any way to clear this?
Try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
"This iPhone hasn’t been backed up in 2 weeks. Backups happen when this iPhone is plugged in, locked, and connected to Wi-Fi."
I am get this message on my Ipad and have followed the instructions, connect the Ipad, lock the screen and connected to a Wi-Fi connection - however I have done this but I still get the message on the screen. It will not even let me press 'OK' - the screen is not responsive... I cannot access the OS. HelpReset your iPad to clear that condition:
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). -
Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume. tried everything.
Pondini's Time Machine FAQ for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Time Machine- Troubleshooting backup issues -
I've been trying for the last two days to backup my ipod touch before I sync. Now I get this message.
It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key. -
What do I do when I get this message on my Time Machine? "The backup disk image “/Volumes/Data/Jeanne’s iMac.sparsebundle” is already in use."
See C12.
Time Machine Troubleshooting -
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
When i try to use time Machine for my backup i get this message: The backup disk image "volume/data/AnnePrybyla's imac.sparsebundle is already in use. What can i do
Look over to the right of this page under the heading of More Like This for multiple answers and solutions to this bug.
-
Why do I get this message every time I travel with my laptop and then return home: "To improve reliability, Time Machine must create a new backup for you."
I get this on my new MacBook Air, but never got it on my old MacBook Pro.
Thanks!See #C13 in Time Machine - Troubleshooting.
-
I continually get this message: The TM could not complete backup. The backup image "/Volumes/Data/....'s computer_001ec21b890f.sparsebundle" could not be accessed (error 1).?
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
When I try to install Maverick on the HD I get this message: This disc is used for Time Machine backups and then nothing happens!
Try looking in Finder at your Macintosh HD. Look to see if there is a backups.backupsdb folder at the root of the hard drive. That's a folder that Time Machine makes on external hard drives to store the backups. If you have one there, some one put it there; rename the folder or delete it. Then try installing again.
-
I get this message. "iCloud Backup. This iPad hasn't been backed up in 2 weeks. Backup happens when this iPad is plugged in, locked and connected to Wi-Fi. When I hit OK nothing happens. My iPad is locked on this message.
If you're still having this problem, reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
So my time capsule is 1 year old exactly and now I am getting this message:he backup disk image “/Volumes/Data/alicia’s MacBook Pro.sparsebundle” is already in use. what does this mean and how do I fix it? i have 1.84T left of space. I have been using this time machine successfully for exactly one year and just now am having an issue.
Thanks,This error involves a complex procedure to remedy the problem:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup
Maybe you are looking for
-
File does not exist, or file is empty; you cannot upload empty files
Hello, I've a problem when trying to upload any file to KM Repository (Content Administrator-KM Content-Root-documents). It shows the following error: File does not exist, or file is empty; you cannot upload empty files. I have applied SAP note 89863
-
Can't transfer videos to ipod / video settings don't show up in itunes
hi everyone, i have a very frustrating problem. i am a college student and have my ipod synced with the computer in the dorm but am home for the summer so am using my parents' computer. i installed the ipod video software and ran the 3-23-06 ipod upd
-
Web Dynpro ALV : get_model_extended - example
Hi, I'm trying to used this method to limit my columns display, if any one can help to give me the example to use this method. Need to pass S_PARAM, i'm not sure what value to be passed. There is note for this, but there is no usage example. [https:/
-
제품 : ORACLE SERVER 작성날짜 : 2004-05-03 LARGE POOL의 개념 및 사용 방법 1. 개념 및 사용 목적 Oracle8.0에서 large pool이라는 새로운 SGA 내의 구성이 도입되었다. large pool 이란 shared pool과 유사하나 실제 shared pool 내의 일부분을 사용하는 것은 아니고 SGA 내에 직접 할당하며, 이 pool을 사용할 수 있는 작업들을 제한하고 있다. Oracle8에서 larg
-
Reordering the presentation layer in BI Server repository
Is there a way to re-order the presentation layer in the BI server repository? Currently if I add something new to a table in a subject area - it is always placed at the bottom. Also, if I add a whole new table - it is also placed at the bottom. I th