Timeout Error in a Synchronous XI - SOAP scenario

Hi All,
I have developed a Synchronous ABAP proxy to SOAP web service scenario.
ECC sends an ABAP proxy request to PI, PI forwards the request to the target system as SOAP message.
I have checked the interface via SOAP UI and it works fine but when we run the end-to-end flow it always ends with a Synchronous timeout error.
The Target system confirms that the response is sent from there side but in PI we are not receiving any response and the system throws a timeout error.
As both PI and the Target system are in same Landscape there is no firewall in between.
Please suggest what can be the possible reasons and the approach to resolve the same?
Thanks in advance,
Shashank

Hi,
"The target system needed credentials for one inbound interface, so for this synchronous scenario(PI<->Target) should the target system maintain credentials some where when the response is sent back to PI as the SOAP channel is on Java Stack?"
Generally for receiver channel we get the user name and password from target system ie web service.
How did you test in SOAPUI? did you test it with providing username and password or not?
even if web service requires user/pwd then it will throw 401 unauthorized error.
check this
can you go to RWB-->component monitoring-->adapter Engine-->communication channel monitoring-->your channel
check if the channel has any errors/exceptions logs.
Regards,
Muni.

Similar Messages

Synchronous Proxy - SOAP Scenario (Error 500 in Response).

Hi
I've built a few Synchronous Proxy -> SOAP Scenarios,
with 'Do Not Use SOAP Envelope' option.
For two of them, I'm facing a common error.
The error is: ADAPTER.HTTP_EXCEPTION (HTTP 500 Internal Server Error).
When I paste the EXACTLY SAME payload picked up from XI, into the SOAP client, it works giving valid response.
Trying to figure out the issue.
R/3 System:
WAS 620 (Level 0041)
XI System:
PI 7.0 (Level 0007)
SOAP System:
BizRights (Approva) 3.0
Any help is appreciated.
Rajendra.

Hi,
Following SAP notes may help you- 804124, 807000
Regards,
Moorthy

HTTP 500 Internal Server Error with Large Attachment in SOAP Scenario

Hi,
we have implemented SOAP - XI - SOAP Scenario in our landscape (Sap Neatweaver Process Integration 7.1) .
One of the functionality of this scenario is the Upload of Documents to External Web Service through standard SOAP Attachment.
If we try to upload a small file (smaller than 20MB), task works fine and the document is correctly uploaded.
If we try to upload a larger file, we encountered in this generic error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1161)
We tried to increase timeout parameters (in communication channel and in ICM Value) but the response is the same.
We verify also if icm/HTTP/max_request_size_KB parameter was set to a value smaller than our file size limit (20MB) but is set to default value (100MB).
The problem isn't on External Web Service Layer because if we try to upload the same documents directly to that web service upload works fine, and in External Web Service's Log there aren''t any indications of this error.
So I ask you: are there any System Parameters to verify to solve this issue?
For additional, in ICM Monitor LOG we can read this WARNING when we call our service:
WARNING => IcmReadFromConn(id=53/454390): temporarily out of MPI buffers -> roll out [icxxthrio_mt 2646]
This warning may be related to the problem? If yes, how can we solve it?
Thanks a lot,
Marcello Ricci

Hi ,
Please answer my following questiosn.
1) which PI version are you using?
2) How many J2EE nodes you have.
please be reminded that SOAP is not for the heavy messages. Then you need to increase your timeout parameters from BASIS.
Rgds
Veeru
Edited by: viru srivastava on Dec 14, 2010 10:18 PM

Synchronous RFC -- SOAP Scenario: problem with SOAP Response/Fault Mapping

Hi,
I've a synchronous RFC --> PI --> SOAP Scenario. The problem is that the message structure of the sending RFC doesn't match the Webservice Structure.
The (SAP standard) RFC has just a Request / Response message structure. Part of the Response Message structure is a exception structure.
The Webservice has a Request / Response message structure and in case of an error I get a SOAP:Fault.
Problem now is that I cannot configure that scenario without usage of BPM as I will have to map SOAP:Response or SOAP:Fault to the RFC Response structure.
Has anybody another idea to do that synchronous scenario (with usage of message mapping) without BPM?
BR
Holger

1)
you maus define 3 mapping.
1)request
2)response
3)Fault
in Interface mapping define at response boths (2-3) mapping. its clear??
2)
otherwise sometjhing is not clear, why do you want fault?? why dont you get only response message. we implement this kind of response:
<response_MT>
<ID> (error ID)
<system> (target system)
<error> (Error Description)
</response>
by this way fault message is not needed. but if you must have it just follow the top of message else, propose second.
Thanks
Rodrigo
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Feb 25, 2008 11:52 AM

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

Synchronous File- Soap scenario with fault message

Hi!
I have a File to Soap synchronous scenario.
All is right when no exception is returned by the web service.
I want to use fault messages to catch thoses exceptions, so I have added fault message in message interfaces and in the mapping program in the interface mapping.
Now, when the web service return an exception like :
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
   <soap-env:Body>
      <soap-env:Fault>
         <faultcode>soap-env:Client</faultcode>
         <faultstring xml:lang="en">NOT_CREATED</faultstring>
         <detail>
            <n0:Z_WS_CREATE_WAGON.Exception xmlns:n0="urn:sap-com:document:sap:rfc:functions">
               <Name>NOT_CREATED</Name>
               <Text> does not have packaging material type and is therefore not a pack.mat.</Text>
               <Message>
                  <ID>HUSELECT</ID>
                  <Number>041</Number>
               </Message>
            </n0:Z_WS_CREATE_WAGON.Exception>
         </detail>
      </soap-env:Fault>
   </soap-env:Body>
</soap-env:Envelope>
I get the following error :
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
   <SAP:Category>XIServer</SAP:Category>
   <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
   <SAP:P1>http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon</SAP:P1>
   <SAP:P2 />
   <SAP:P3 />
   <SAP:P4 />
   <SAP:AdditionalText />
   <SAP:ApplicationFaultMessage namespace="" />
   <SAP:Stack>Interface mapping http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon does not exist in runtime cache</SAP:Stack>
   <SAP:Retry>N</SAP:Retry>
</SAP:Error>
My mapping program for fault message is well defined (I tested it with the exception message received from the web service).
I have also refresh caches, but without success...
Can anyone help me ?
Thanks in advance,
Laurence

Hey Laurence,
A File adapter is aysnchronous u cant use for synchrous because it cant acknwlodge the response it gets or itt sends.
regarding two asynchoronus
1. file to SOAP asychn.
2. triggger the second one if SOAP has exception then pass the error from SOAP to New File.
using BPM we have to use Transportion level acknowledgments
please reward points if it helps
Regards
Sreeram.G.Reddy

Synchronous IDoc - SOAP scenario

Hi all,
Our current scenario is like this: SAP (Idoc) -> XI -> SOAP (Idoc). The receiver system will reply with an ALEAUD Idoc as in: legacy (IDoc over SOAP) -> XI -> SAP IDoc).
We have a requirement to wait with sending the next IDoc from XI to receiver Web Service on legacy side until we get an ALEAUD IDoc back for the previous IDoc sent to the Web Service.
How can we implement this?
Is BPM necessary?
As far as I know you can only set the QoS for sender adapters, and the SAP Idoc scenarios are always asynchronous. But we can implement a synchronous send step in a BPM with ALEAUD as response message. This will solve our problem, correct?
Any other way? We would like to avoid using BPM.
Any help with this is highly appreciated!
Br,
Kenneth

Thanks for your reply, Udo:)
I am currently building the BPM now.
So, you are saying that I cannot create an inbound sync MI with input message IDOC and response message ALEAUD?
We want to send ACC_GL_POSTING IDoc (or identical structure) to a Web Service and receive the ALEAUD from the legacy system through a Web Service published on XI. We want to relate these two so that the BPM finishes when it receives the ALEAUD, and can then send the next ACC_GL_POSTING IDoc.
I have created the following objects in repository:
MI_ACCGLPOSTING_ASY_ABS (in receive step in BPM)
MI_ACCGLPOSTING_ALEAUD_SYN_ABS (in send step in BPM)
MI_ACCGLPOSTING_ALEAUD_SYN_IN (used for receiver interface towards legacy SOAP adapter)
MI_ALEAUD_ASY_ABS (used for send step in BPM)
I believe no mappings are necessary since we are not doing any conversions.
Can you please confirm that this looks correct, and also provide what settings I need in Directory?
Thanks a bunch!
-Kenneth

HTTP 401 Unauthorized, error in proxy to SOAP Scenario

Hi all,
We got the below error in our proxy to SOAP Scenario.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized
We configured User Authentication,Proxy and Proxy User Authentication for the Receiver Communication Channel correctly still we are getting this error.
So please let me know what could be the possible reasons behind it and how to resolve it.
Waiting for your valuable response.

Hi,
Consider the parameters connection pool size and connection wait time:
ume.r3.connection.master.poolmaxsize
ume.r3.connection.master.poolmaxwait
These parameters are described in the note below:
#821026 - AdapterEngine messaging URL returns HTTP 401 under high load
Also, ensure you have maintained the correct password, which MUST be the same, for all the service users
on XI. You may check all the places it should be maintained, such as Exchange Profile, SU01, SLDAPICUST, etc..
Please kindly check the note below:
PI 7.1:
#999962 - PI 7.10: Change passwords of PI service users
XI 7.0
#936093 - XI 7.0: Changing the passwords of XI service users
XI 3.0
#721548 - XI 3.0: Changing the passwords of the XI service users
And ensure that the user has the correct role as per link below:
http://help.sap.com/saphelp_nwpi71/helpdata/en/9f/d12940cbf2195de10000000a1550b0/frameset.htm
Regards,
Caio Cagnani

Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

Hi all,
We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
We are running PI 7.4.
Any help is appreciated.
Thanks,
Pushpa

Hi,
Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
1. Test a fresh message from local SOAP UI tool.
2. Pick 3rd party WSDL file and Import in SOAP UI tool.
3. Put some dummy data for mandatory fields
4. Trigger it msg and ckh if you get successful / response msg.
5. Check if firewall is open and that URL is not blocked.
Hope it helps
Regards,
Azhar

Error in synchronous( abap proxy to soap)scenario

Hi experts,
My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
configuration steps are
1. only client proxy to soap scenario I have done.
communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
Already we have RFC destination connection and connection type H for proxy to xi.
1.Is it required RFC destination connection for xi to server proxy.
2.Is it required receiver proxy communication channel for server proxy?.
i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
error is:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
Kindly help me.
advance thanks
thanks and regards
elton
Edited by: eltonsaranya on May 9, 2011 10:27 AM

Your exception message shows problem at the webservice side.
Check the following:
a) you need two mappings one for proxy req to soap request and other soap response to proxy response
b) You need to create service interfaces both sender and receiver synchronous .
c) communication channel QOS is best effort for both sender and receiver
d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
f) See your SOAP response structure matches with WSDL provided.
g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI for that web service. So that you know whether problem exists on the target system or not.
Hope that helps.

'500 Connection timed out' Error in Sender SOAP Scenario

Hi mates,
I exposed o/b synch MI as a webservice. This webservice is received by a BPM and it triggers an IDOC generation program on R/3. BPM waits & collects the IDOCs and cosntructs the response from these IDOCs and returns it to the webservice caller.
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
<i>500 Connection timed out
Connection timed out (-5)
Error: -5
Version: 6040
Component: ICM
Date/Time: Thu Jun 15 17:06:10 2006
Module: icxxthr_mt.c
Line: 2551
Server: hcidx1_DX1_03
Detail: Connection to partner timed out after 60s</i>
My BPM waits for 10 minutes and I set the parameter XI.Timeout to 600000 (i.e. 10 minutes) in module parameter table for the sender SOAP adapter as per the note 856597. And in SXMB_ADM, I set the parameter CHECK_FOR_ASYNC_RESPONSE_TIMEOUT of category SA_COMM to 600. In my client program, I set the timeout as 1 hour. All these config params are supposed to make sure that all the components involved wait for atleast 10 mins before they timeout.
But I get timeout after 60 sec. Whats wrong/missing?
I highly appreciate your inputs.
thx in adv
praveen

Hey Praveen,
<i>I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.</i>
does this mean you are getting some response in some cases where u r payload is small , and if its large ur getting some timeout like this? Also is ur scenario Sync / Async?
Assuming i understood correctly , i came a similar situation but that has to do some thing with Paging file / memory issues when the files are too huge and no. of users are high please let me know if this is the case.
best regards
Vara
[PLEASE REWARD FOR POSTING]

IDoc to SOAP scenario is showing error

Dear Experts,
We were trying a scenario which is IDoc-XI 3.0->SOAP and where the WebService is situated outside our office network. Our network team have bypassed proxy for accessing that WebService URL and the same is accessible from our XI3.0 application server from browser. We have configured the scenario and when we have tested the scenario from RWB->Component M onitoring->Integration Engine->Test and this has worked fine. But when we have tested the scenario by triggering IDoc from the R/3 system, it is throwing the below mentioned error in both at the comm chanel and at the SXMB_MONI acknowledgement.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 403 Service Error
points to be noted here:
1. Business Service has been configured correctly for triggering ALEAUD messages and ALEAUD messages are reaching R/3 successfully.
2. We have chosen option Keep Headers and Do not use SOAP header options.
3. We are passing some values to the SOAP Header from SOAP channel.
Please could somebody help us on the root cause of the error message.
We have run report IDX_NOALE for that particular IDoc so that it doesn't return any acknowledgement back to the R/3 system.
Thanks and regards,
Sugata
Edited by: Sugata Basu on Nov 19, 2011 12:40 PM

Dear,
IDoc to Soap scenario we have to import wsdl at receiver end and map the field from the mapping document but some times receiver end some changes may happen. if it is correct only your mapping we have to conclude from the below points.
1. Check the mapping in Message Mapping and Operation Mapping Test and conclude.
2. you should check url from receiver that is correct or wrong.
3. ask the wsdl from receiver end.
the given ED and receiver side application is same this type of error will not come.
Please check at receiver application or else what ever new fields are added in reciver may be miss mach of ED.
Regards,
Kiran Polani

Idoc to soap scenario - soap response error

hi
i am using pi 731 single stack.
the scenario is idoc to soap. the message mapping is working fine and output is generated successfully.
the message is failing in mesage monitor and communication channel monitor. error is -
Exception caught by adapter framework: SOAP: Response message contains an errorXIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: VEN-OMI-1007:
This scenario is async scenario. How to soap remove this response message error.
rgds

Dear,
IDoc to Soap scenario we have to import wsdl at receiver end and map the field from the mapping document but some times receiver end some changes may happen. if it is correct only your mapping we have to conclude from the below points.
1. Check the mapping in Message Mapping and Operation Mapping Test and conclude.
2. you should check url from receiver that is correct or wrong.
3. ask the wsdl from receiver end.
the given ED and receiver side application is same this type of error will not come.
Please check at receiver application or else what ever new fields are added in reciver may be miss mach of ED.
Regards,
Kiran Polani

RFC to SOAP Scenario error

Hello ALL
I am trying to working in RFC to SOAP scenario in sap pi 7.31 single stack system.with help of blog **************** - Scenario on RFC to SOAP
i am trying to pass input values from ECC through RFC to web service .
while sending data using function module from ECC system i got following error
thnx in advance

Hi Ganesh,
are you getting any error is SM58? Please check the below blog for configuration
Michal's PI tips: How do you activate ABAP Proxies with AEX - simplified version
IDOC_AAE To File with all Configurations
the below discussion will be useful
RFC to FILE(7.3) single stack

Error RFC to SOAP Scenario

Hi Experts,
I am getting an error while dealing with RFC to SOAP scenario::
soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: . at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
IS it problem from the webserver in sending the response?
Please suggest.
Thanks & Regards,
Sushama

Hi Suraj,
Thanks for the imputs.
We are given with the webservice by separate team, also I am accessing the application via Citrix. I cant test the WS outside the client network and in client desktop they haven't installed Altova Xml Spy
Request and response both are generated in Moni. It seems problem in receiving response only ?? WS url is also correct.
Regarding Receiver Soap parameters:
I have checked adapter specific identifiers and Variable transport binding.
Please suggest, if this is problem with the WS, I need to check with the team.
Thanks & Regards,
Sushama

Timeout Error in a Synchronous XI - SOAP scenario

Similar Messages

Maybe you are looking for