Tiny doc error? Configuring+and+Using+Coherence+Extend
This page:
http://coherence.oracle.com/display/COH35UG/Configuring+and+Using+Coherence+Extend
mentions the string "dist-extend-direct" only once. Is that intended just as an example of something that would match against
<cache-name>dist-*</cache-name>
or was that an error? It seems like it should be mentioned explicitly in the XML config file examples on that page.
-Andrew
Hi Andrew,
It is the former. It is intended as an example of a cache name that would match the "<cache-name>dist-*</cache-name>" cache mapping in the cluster cache config.
Patrick
Similar Messages
-
How to Configure and Use Oracle's JMS Connector with Tibco EMS
Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'foundHi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents. -
Hi Experts,
Iam new to KM.We need to configure KM for our client. When I surfed internet ,I can see only explanation on KM but I need steps for configuration and details about how well KM can be used. Share me the documents,procedures and steps to configure and use KM.
Currently Iam working on KM Navigation Iview and I have following doubts
1) Is there a way to allot some space in KM automatically when users are newly created.Under Userhome link of KM , for the newly created users a seperate link is automatically created .Do I have to assign that to user for using KM.
2)Can we restrict space for each user in KM.
3)How to configure and customize context menu in KM navigation iview.
Regards
Karthiheyan MurugesanHi Karthiheyan,
Still I have further requirement like How to transfer all datas of KM from one server to a new server for all the users (also how to create back up?
Through KM Tranport you can transport the contents from server to server
For KM content transport go through the below help document
http://help.sap.com/saphelp_nw70/helpdata/en/46/7649426fd759dbe10000000a1553f6/frameset.htm
How to customize the various options like view , actions ,settings present under Details option?
For the context menu of folder New->Forms->...How to restrict this forms visibility?
This can be done using the Layout set,there you will be having collection render,resource render,details setting through which the options can be customized and the customized layout should be used in field layout set in the KM Navigation Iview.For further understanding go through the below document.
http://help.sap.com/saphelp_nw70/helpdata/en/30/504a1e7f0e354bbf9adedf1a29f3ec/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8?QuickLink=index&overridelayout=true
Naga -
Can C++ Client use Coherence*Extend on AIX?
Hi Experts,
My application is a C++ client, I want to connect to Coherence Cluster using Coherence*Extend on AIX,
I checked coherence document, I found that Coherence*Extend C++ support pure C++. But I couldn't
find the download URL of Coherence*Extend C++ for AIX, So If C++ Client can use Coherence*Extend
on AIX?If yes, how can I get the lib for Coherence*Extend C++ of AIX? Thanks.Supported environments are listed here:
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/gs_install.htm#BABDCDFG
That does not currently include AIX; the platforms supported largely reflect the platforms that customers requested over time, so speak with your Oracle account representative.
In the meantime, I would suggest looking at the RESTful support in Coherence that will allow you to access the caches from AIX (over REST/HTTP) without an Extend client.
Peace,
Cameron Purdy | Oracle -
How to configure and use StartTLS on Windows AD server (2008 R2 or 2012) ?
I would like to use port 389 with secure ldap using StartTLS, i.e ldap over TLS. I could not find documentation to configure and use ldap over tls using port 389 with the implementation of StartTLS command. Though I could find documentation on secure ldap
on port 636. Please help.Hello,
see about self-signed certificates in
http://support.microsoft.com/kb/321051/en-us and how to enable them in AD.
Please see if steps in
https://kb.meraki.com/knowledge_base/certificate-requirements-for-tls will help you.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
How to configure and use labview using java
I want to configure and use labview in my application using java, please help me out with a solution how i can configure it (like providing input to labview and getting output from labview in java ).
Thanks,
ATFDid you try a search?
Or: How Do I Integrate Java with National Instruments Software Products? -
How to configure and use jboss cache
Hi,
I need to use Jboss Cache in our application,
But i don't know anything about Jboss Cache...
can u tell me requirements and configuration for this?
and i am using jboss application server 3.2.3..
and apache-ant-1.7.1, jdk1.6.0_06, jbosscache 2.2.0
can u tell me how to configure and use jboss cache?
Thanks & Regards
ThilkumarGo to the JBoss web site and read up on the documentation there.
And if you still have any questions you'll probably get better answers at the JBoss forums than in these forums.
- Roy -
Configurations and uses of productionresource/tool..?
Hii friends.
Please let me know the uses of productionresource/tool and its configurations and uses. i heard that most of the manufacturing industries use this senarious.
Please help me
Regards,
SirishDear,
Production Resource/Tool(PRT) is a moveable operating resource used in production
You can assign production resources and tools to the task lists and production orders for which they are required.
Production resources/tools that are used for testing during production can be assigned to the corresponding inspection characteristic in the inspection plan.
Purpose
Unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly. For example, PRTs include documents, engineering drawings, jigs and fixtures, and measurement instruments.
You can assign production resources/tools to internal and external activities. You use the assignment to determine:
The quantity
The operating time
The dates
of the PRTs required to carry out the activity.
There are several categories of production resources and tools in the R/3 System. The category determines the characteristics and business functions that a PRT can have.
You can create production resources/tools with the following categories:
A material PRT has its own material master record with the view "PRT". A material PRT can be procured, that is, it can either be purchased or produced. You can also keep it in stock and track both its value and quantity.
A miscellaneous PRT has its own PRT master record and can neither be procured nor kept in stock.
A document PRT has its own document info record, (for example engineering drawings or NC programs). You can manage these PRTs using the R/3 Document Management System.
In the Project System you can assign documents directly to activities. Consequently you will not use this type of PRT very often.
An equipment PRT has its own equipment master record and has the full equipment functionality. This category is particularly useful for those production resources or tools which you must maintain yourself or which must be serviced at regular intervals. With the equipment category, you can furnish proof of service or usage values for the production resource/tool.
PRT as a material - MM01
PRT Master - CF01
Document - CV01N
Equipment - IE01
PRT availability check - OPJK
PRT control keys - IMG>Production>Basic data>PRT>define control keys
Also refer the links below...
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42719461e11d182b50000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/bf/5ffd0e6d4311d1ad5e0000e8a6353a/frameset.htm
Hope this helps...
Regards
R.Brahmankar -
Configure and use push notifications for IOS - Xamarin
Is it possible to configure and use push notifications in SharePoint 2013 apps for iPhone Xamarin.
Recently I started creating a Xamarin application that supports both Android and IPhone application. So my doubt here is, Is it possible to create a solution in SharePoint Server for sending
push notifications and a client side iOS - Xamarin application for receiving the notifications.
If Possible how I can create the same. Please help. If it is not possible anyone please suggest me a workaround to implement the same.This is not a permanent fix but through this you can easily use the apps
Go to Settings> General> Accessibility> Guided Access
Now tap the Guided Access and turn it on.
Now go straight to the app which is having this problem. After opening the app press the home button 3 times to activate the Guided Access mode.
After activating and choosing a password you'll see that there is no "connect to iTunes to use push notifications in ios 8.1" pop up any more.
If you want to leave the app press the home button three times again.
Thanks
It works 100% -
Question related to POF configuration and use-subclasses
Hi,
I noticed that the default POF configuration in coherence.jar (coherence-pof-config.xml) forces the use-subclasses flag to true (the ultimate use-subclasses value is true if whichever loaded POF configuration file specifies it to be true), and thus making it impossible to get error messages if a certain subclass of a registered type is not registered specifically in the POF-configuration, and users may silently lose data this way.
My question is:
Is the use-subclasses flag in the coherence-pof-config.xml set to true only because of Throwable-s, or are there other Coherence-provided classes which are serialized by subclass resolution and thus depend on the use-subclasses flag being true?
If only the Throwable-s depend on that, then instead of setting it to true, we can set it to false and use the following class instead of ConfigurablePofContext as the Serializer class for the POF-enabled services:
import com.tangosol.io.pof.ConfigurablePofContext;
import com.tangosol.run.xml.XmlElement;
* This class extends ConfigurablePofContext with the possibility to
* configurably disable the subclass-allowed setting forced true in the
* coherence-pof-config.xml, and still be able to use ThrowablePofSerializer for
* each not specifically configured Throwable subclass.
* @author Robert Varga
public class ThrowableAwareConfigurablePofContext extends
ConfigurablePofContext {
* By setting this flag to true, it is possible to disable subclass
* resolution. Interface resolution remains untouched.
private boolean m_fDisableSubclassAllowed;
* {@inheritDoc}
public ThrowableAwareConfigurablePofContext() {
* {@inheritDoc}
* @param sLocator
public ThrowableAwareConfigurablePofContext(String sLocator) {
super(sLocator);
* {@inheritDoc}
* @param xml
public ThrowableAwareConfigurablePofContext(XmlElement xml) {
super(xml);
* Sets the {@link #m_fDisableSubclassAllowed} flag. You can set this as an
* <init-param> in the Coherence cache configuration file.
* @param disableSubclassAllowed
public void setDisableSubclassAllowed(boolean disableSubclassAllowed) {
this.m_fDisableSubclassAllowed = disableSubclassAllowed;
* @return false if disableSubclassAllowed is true, or result from the super
* implementation otherwise.
@Override
protected boolean isSubclassAllowed() {
return (!m_fDisableSubclassAllowed) && super.isSubclassAllowed();
* If the super implementation could not resolve the type id for the class,
* and subclass-allowed is disabled and clz is a {@link java.lang.Throwable}
* subclass then it falls back to the configuration for
* {@link java.lang.Throwable}.
@Override
protected int getInheritedUserTypeIdentifier(Class clz) {
int result = super.getInheritedUserTypeIdentifier(clz);
if (result == -1 && !isSubclassAllowed()
&& Throwable.class.isAssignableFrom(clz)) {
result = getUserTypeIdentifier(Throwable.class);
return result;
}Thanks and best regards,
Robertdcarrano wrote:
Hi Robert,
If you are only interested in Java you are correct.
If you need more detail please let me know but I hope this answers your question.
Best regards,
-DaveHi Dave,
I am also interested in other environments, so I need more detail.
I am looking at the portability of my POF Serializer generator in which I assume that use-subclasses is false, because supporting use-subclasses being true would be quite hard to define, not to mention implement.
Thanks and best regards,
Robert -
Error configuring and starting Managed Server in WebLogic 10.3
Hi,
I am able to configure and start the Managed Server on windows environment. I am trying to configure Managed Server on linux environment. I am configuring the Managed Server with custom keystore. When I configured the Managed Server I specified the keystore/trustsote information in the Keystores tab of the Admin Console for Managed Server settings. Specified Private Key Alias, Password in SSL tab.But when I am starting the Managed Server from command line, I see the process looking for demo trust files and failing.
Here is the command I run to start the Managed Server:
./startManagedWebLogic.sh MyManagedServer1 https://localhost.localdomain:8443
Below is the console output:
<Mar 11, 2015 12:37:44 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.45-b01 from Sun Microsystems Inc.>
<Mar 11, 2015 12:37:45 PM PDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:beaadmin
Enter password to boot WebLogic server:
<Mar 11, 2015 12:37:53 PM PDT> <Info> <Security> <BEA-090908> <Using default WebLogic SSL Hostname Verifier implementation.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks.>
<Mar 11, 2015 12:37:53 PM PDT> <Error> <Security> <BEA-090132> <Could not open the keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks for read access. Exception: java.io.FileNotFoundException: /opt/wlserver_10.3/server/lib/DemoTrust.jks (No such file or directory)>
<Mar 11, 2015 12:37:53 PM PDT> <Warning> <Security> <BEA-090164> <Failed to load trusted certificates from keystore /opt/wlserver_10.3/server/lib/DemoTrust.jks of type jks>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jre1.6.0_45/lib/security/cacerts.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at https://localhost.localdomain:8443.>
<Mar 11, 2015 12:37:55 PM PDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 11, 2015 12:37:55 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320400> <The log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log00015. Log messages will continue to be logged in /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log is opened. All server side log events will be written to this file.>
<Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090837]The configured keystore location for the PKI Credential Mapper is either null or empty.>
<Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090815]The password provided for the keystore configured for the PKICredential Mapper was null.>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 11, 2015 12:37:57 PM PDT> <Critical> <Security> <BEA-090403> <Authentication for user beaadmin denied>
<Mar 11, 2015 12:37:57 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User beaadmin weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Mar 11, 2015 12:37:57 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Why is it looking for demotrust.jks file to start the Managed Server. We don't use the demo trust and cannot copy to the location it is referring to. I followed the solution provided at the below link:
http://serverfault.com/questions/106499/custom-trust-and-custom-identity-keystore-in-weblogic-10-3
There are 2 options given in the link. To update the boot.properties of the Admin Server and appending JAVA_OPTIONS to DomainEnv file. Both of these caused the failure of Admin Server. I couldn't bring up the server after these changes.I also came across posts talking about boot.properties for Managed Server. I don't see the security folder that has boot.properties for my Managed Server (verified it on both windows and linux boxes).
Thanks in advance.
-nn.Hi Faisal,
Here is the config.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd"
xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security"
xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<name>JCRMDomain</name>
<domain-version>10.3.4.0</domain-version>
<security-configuration xmlns:xacml="http://xmlns.oracle.com/weblogic/security/xacml">
<name>JCRMDomain</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType">
<sec:control-flag>SUFFICIENT</sec:control-flag>
</sec:authentication-provider>
<sec:authentication-provider xmlns:ext="http://xmlns.oracle.com/weblogic/security/extension" xsi:type="ext:jcrm-authenticatorType">
<sec:name>JcrmAuthenticator</sec:name>
<sec:control-flag>SUFFICIENT</sec:control-flag>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:credential-mapper xsi:type="wls:pki-credential-mapperType">
<sec:name>PKICredentialMapper</sec:name>
</sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:user-lockout-manager>
<sec:lockout-threshold>3</sec:lockout-threshold>
<sec:lockout-duration>15</sec:lockout-duration>
<sec:lockout-reset-duration>99999</sec:lockout-reset-duration>
</sec:user-lockout-manager>
<sec:deploy-role-ignored>false</sec:deploy-role-ignored>
<sec:deploy-policy-ignored>false</sec:deploy-policy-ignored>
<sec:fully-delegate-authorization>true</sec:fully-delegate-authorization>
<sec:security-dd-model>DDOnly</sec:security-dd-model>
<sec:combined-role-mapping-enabled>true</sec:combined-role-mapping-enabled>
<sec:name>myrealm</sec:name>
<sec:delegate-m-bean-authorization>false</sec:delegate-m-bean-authorization>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator"
xsi:type="pas:system-password-validatorType">
<sec:name>JCRMPasswordValidator</sec:name>
<pas:max-password-length>31</pas:max-password-length>
<pas:min-password-length>15</pas:min-password-length>
<pas:min-numeric-characters>2</pas:min-numeric-characters>
<pas:min-lowercase-characters>2</pas:min-lowercase-characters>
<pas:min-uppercase-characters>2</pas:min-uppercase-characters>
<pas:min-non-alphanumeric-characters>2</pas:min-non-alphanumeric-characters>
</sec:password-validator>
<sec:deployable-provider-synchronization-enabled>false</sec:deployable-provider-synchronization-enabled>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{AES}cpwhv2peqwl0Z8Ma1Jk7KlmC6d1gtCAqxnzrmR5ssybHpM9AUzbBRJ7rE7m4/7U16IHgsTMkcOr/5/abZJ4NeuHR45jdDK1EjFmnUuPssISmGkan3EIpCKHmPPIynVxh</credential-encrypted>
<node-manager-username>wdUXiuwL5A</node-manager-username>
<node-manager-password-encrypted>{AES}UDiZjaLOrm0y+/I9noQVURudpzmRKMBOQR2B8ofNIt8=</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>10000000</max-http-message-size>
<ssl>
<name>AdminServer</name>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>8443</listen-port>
<two-way-ssl-enabled>true</two-way-ssl-enabled>
<server-private-key-alias>localhost.localdomain</server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
<ssl-rejection-logging-enabled>true</ssl-rejection-logging-enabled>
<allow-unencrypted-null-cipher>false</allow-unencrypted-null-cipher>
<use-server-certs>true</use-server-certs>
<jsse-enabled>true</jsse-enabled>
</ssl>
<listen-port-enabled>false</listen-port-enabled>
<web-server>
<keep-alive-secs>60</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
</web-server>
<listen-address/>
<java-compiler>javac</java-compiler>
<tunneling-enabled>true</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
<key-stores>CustomIdentityAndCustomTrust</key-stores>
<custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
<custom-identity-key-store-type>JKS</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
<custom-trust-key-store-type>JKS</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
<overload-protection>
<panic-action>system-exit</panic-action>
<failure-action>force-shutdown</failure-action>
<server-failure-trigger>
<max-stuck-thread-time>600</max-stuck-thread-time>
<stuck-thread-count>3</stuck-thread-count>
</server-failure-trigger>
</overload-protection>
</server>
<server>
<name>MyManagedServer1</name>
<ssl>
<enabled>true</enabled>
<listen-port>8445</listen-port>
<server-private-key-alias>localhost.localdomain</server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
</ssl>
<machine xsi:nil="true"></machine>
<listen-port>8444</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<key-stores>CustomIdentityAndCustomTrust</key-stores>
<custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
<custom-identity-key-store-type>JKS</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
<custom-trust-key-store-type>JKS</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
<data-source>
<rmi-jdbc-security xsi:nil="true"></rmi-jdbc-security>
</data-source>
</server>
<production-mode-enabled>false</production-mode-enabled>
<embedded-ldap>
<name>JCRMDomain</name>
<credential-encrypted>{AES}LNAnq4qCQQmy9rCOMN+uIZVPq1bVvPrwQqqtOScZrnYmwESt9aruHNVy4IjqMWz7</credential-encrypted>
</embedded-ldap>
<administration-port-enabled>true</administration-port-enabled>
<configuration-version>10.3.4.0</configuration-version>
<admin-server-name>AdminServer</admin-server-name>
</domain>
It has 'CustomIdentityAndCustomTrust' for both Admin Server as well as managed Server in it.
Thanks,
nn -
How to Configure and Use Oracle's JMS Connector with Tibco Enterprise
Following the advice here: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-connect-to-tibco/doc/how-to-connect-to-tibco.html
I believe I need to provide a username and password for the Tibco JMS provider, and would like to know the correct way. Is this right, in orion-application.xml
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
<property
name="java.naming.factory.initial"
value="com.tibco.tibjms.naming.TibjmsInitialContextFactory">
</property>
<property
name="java.naming.provider.url"
value="tibjmsnaming://jleinawe-sun:7222">
</property>
<property name="java.naming.security.principal" value="user" />
<property name="java.naming.security.credentials" value="password" />
</resource-provider>This is kind of up to Tibco...
When you add properties to the resource-provider element, you are just adding entries to a Map which gets passed to the initial context factory, which in this case is implemented by Tibco (TibjmsInitialContextFactory), so you may want to check their docs.
It's possible they only use that for username/password for JNDI access purposes and not for JMS. If so, you can explicitly set username/password for outbound connections in the oc4j-ra.xml file, and using ResUser/ResPassword in the MDB's activation-spec to set username/password for inbound connections.
-Jeff -
Configuring and using CipherSuites in WLS 6.1
I have a few questions about the supported CipherSuites in WLS 6.1 and the
the handshake mechanism works with this default:
1) Edocs specifies that the CipherSuite that WLS uses is configured in the
config.xml. I understand this and can see the tag <Ciphersuites> with a
default setting of SSL_RSA_EXPORT_WITH_RC4_40_MD5 in the docs on the
config.xml file. My question is: Is there anywhere in the console to
configure this???
2) From my understanding, in the handshake phase of the SSL protocol, the
client send over which it's list of CipherSuites it would like to use in
order of preference. The server then selects which one will be used. My
question is: If the CipherSuite defined in the config.xml is not in the
client's preferred list what will happen? Will WLS pick one of it's other
CipherSuites that is in the client's list? What if WLS doesn't support any
of the suites specified in the client's preferred list?
Answers to any or all of these would be greatly appreciated.
Thanks,
Michhi it is unlikely people will answer you here because it is about netbeans. this is a java site so they will probably tell you to go to a netbeans site. the one i use is nabbles netbeans just do a search on google to find it.
you might get lucky here but i doubt it because most people here use notepad and run programs from command prompt. so they might not even know anyway. also i think there is a tutorial at the netbeans sites about transfering libraries they tell you how in some of the introductory tutorials. i think one of the tutorials in relation to setting up a database using derby shows you how to do it but i can't remember.
your best bet is nabble good luck. -
Saving scanned doc error message when using Mac Maverick with HP Photosmart C4795
When I use HP Scan to scan documents with my HP Photosmart C4795 it scans fine. The problems comes when I try to save the scanned document. I get one of two things, an error message or black document. I get an error that states "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I know that's the location is not read only because I save documents there all the time from other programs. When I get the black document, I open the file and its a black page with white lines going across.
This started happening when I upgraded to Maverick. When I had snow leopard I didn't have this problem. I looked for update drivers and there aren't any available on the HP software & drivers webpage. HP help! Any suggestions please help.Hi,
That happens due to lack of compatibility of the HP Scan application for your device with Mavericks, it is not intended for the operating system and will cause issues while saving a file.
Be sure to run Software Update, then scan using Image Capture or Preview as listed below.. those are the scan solutions provided for Mavericks:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Once you launch Image Capture, I would suggest keeping it on the dock for easier access.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
[SOLVED] Configuring and using a netcfg profile
Hi guys,
As per the Beginner's Guide I have been trying to set up netcfg to use my network configuration profile https://wiki.archlinux.org/index.php/Be … de#Wired_2
I can successfully setup network connectivity every time I boot using the 'ip addr add 10.1.0.8/8 dev eth0' and 'ip route add default via 10.0.150.1' commands but ideally I'd like a static IP setup automatically.
I have installed ifplugd and successfully enabled net-auto-wired.service using systemctl.
I have created my profile here '/etc/network.d/ethernet-static'
CONNECTION='ethernet'
INTERFACE='eth0'
IP='static'
ADDR='10.1.0.8'
GATEWAY='10.0.150.1'
DNS=('10.0.0.17' '10.0.0.18')
Now when I manually run 'netcfg -u ethernet-static' it fails and I can't for the life of me work out why...
Is there any other information I could provide? As I said I can use the 'ip' commands to connect using the same addresses.
Please help! Many thanks
Last edited by Robula (2012-11-22 10:23:33)p0x8 wrote:
According to the netcfg-profiles man page, the netmask value defaults to /24. So your interface is being configured with a 10.1.0.8/24 address, thus making the 10.0.0.0 network (where your gateway resides) unreachable.
You have to specify your /8 netmask explicitly, e.g.:
CONNECTION='ethernet'
INTERFACE='eth0'
IP='static'
ADDR='10.1.0.8'
NETMASK=8
GATEWAY='10.0.150.1'
DNS=('10.0.0.17' '10.0.0.18')
Genius! Thank you so much, it's working now.
I was trying to use journalcfg, however I couldn't work out how to filter it properly or just show the last 20 or so entries.... But anyways problem solved.
Kudos to you p0x8
Thanks all!
Last edited by Robula (2012-11-22 10:24:03)
Maybe you are looking for
-
Why can't I create a gallery in iPhoto in the normal way who in the past? If I sent the gallery to another the pictures now will be deleted!
-
How to maintain bitmap index on a large table in DW?
Hi all, We have many tables which are constantly doing either FULL or INCREMENTAL loading. And we have created many BITMAP indexes and several B*Tree index (caused by PRIMARY KEY or UNIQUE key constraints) on those tables. So, what I want to know is,
-
Mail Conditions not working in mail Form
Hi all, Please kindly help me with the issue I faced. I created mail form with 2 Text elements. Each text element has condition from marketing attributes ( text element 1 - condition BPs are owners of freedges), ( text element 2 - condition BPs are
-
How to convert VCR Tape to DVD on MACbook Pro?
Any insight into how to convert VCR tapes to DVD on Macbook Pro would be much appreciated!
-
Basic questation about collation
HI all, I have basic questation about create colletion . I want read and compare value from enviromnemt variables . But in the query i find "select * from SMS_R_System inner join SMS_G_System_ENVIRONMENT on SMS_G_System_ENVIRONMENT.ResourceId = SMS