TM on MacBook with multiple externals

I use a MBP and have an external at the office and one at home which are my two locations. How can i set up two different externals and will TM know the difference?

I don't think you can have two separate drives in use for Time Machine. I would just keep one TM drive where you think you would need it the most.
For example, if you kept it at work, you could use your MBP at home with no TM drive attached. When you hooked it up at work the next day, anything you changed since the previous time it was backed up would get added to the TM archive.
You wouldn't get the same hourly backups that you would get from a drive attached full-time, but it would still be almost as good.

Similar Messages

Using a seagate external drive with multiple macs

i got a 1TB seagate external hard drive for backup and transfer purposes... it had a little program to help set it up and i set it up for use with mac and pc ( only onther option was stricty this computer.) it works on my computer and a pc but when i tried transfering files from another older mac i have it showed that i could only read on that computer...
how can i get it to work with multiple macs...?

I have the oldest macbook (1.83. 2 gigs ram, 60 gig internal hard drive)
I have all my logic content on my external maxtor firewire 400 drive (usb 2.0 is actually faster than firewire 400) and everything is fine. the good thing is if your external drive has 7200rpm, but the ones with 5600rpm should do as well.
Once you drag your apple loops to logic from your external drive, logic will remember for the next visit. And when you are opening a project which is on the external drive , just find it with logic finder and all should be fine.

How to sync with multiple computers?

I have my iTunes library on my MacBook and all of my Apple devices synced accordingly. My family also has an iMac, and I would like other family members to be able to sync from the iMac. I know I can use Home Sharing to allow the iMac to view/play the music when my Macbook is active on the network. I also know I can purchase iTunes Match so I can access the music when my MacBook is offline and edit the playlists. Yet, I would love to be able to set up the iMac so the iDevices could actually by synced with that computer as opposed to mine. How can I go about this?

Yes, you can sync your device with multiple computers. Only that one is set to AUTO SYNC whilst the rest is set to "MANUALLY MANAGE MUSIC".
Refer to this article:
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/HT1202
However, issues may occur leading to data corruption or data loss if you regularly sync Contacts, Calendars, Notes, or bookmarks between multiple computers using iTunes and your iOS device. Syncing once to move your data to a new computer should not cause these issues.
Refer to this article:
iOS: Issues syncing content with multiple computers using iTunes
http://support.apple.com/kb/TS1474

How to manage playlists with multiple devices?

We have multiple devices in our household that use the same Macbook Pro. We all like different kinds of music and we are now having a difficult time trying to manage the playlists on the different devices. How do we manually manage playlists for each separate device? We have iPhones, iPads and iPods.

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Spaces with Multiple Displays

I have been using Spaces with my MacBook with an external display, without mirroring to extend my desktop. Overall, it works really well and has certainly made things less hectic when I have 1-8 windows open per application and up to 5 applications.
One thing I figured out by playing is that you can have windows from the same application in different spaces. For example, I have FireFox open with three windows, and can position one FF window in each of three spaces. The only way to do this that I have found is to drag the individual windows from the Spaces view (F8), but it's really useful for me to have web-pages organized by Space (personal, work, Google, etc.). By the way, if I shut down FF or restart the machine, the windows do not "remember" which Space they were in, which is not surprising to me. I assume that is a limitation of FF, not OS X.
Now here is the issue/problem I have experienced several times: Every so often, I will completely "lose" one or more windows. For example, I have two FF windows open in Space 4, then upon switching to another space and going back to Space 4, the windows are gone. They still show up in the list of FF windows (from the "Windows" menu in FF itself), so I think they are still open, but it's like they were assigned to Space 0 or something. There is no way to get to them or bring them back that I have found. There is also no good explanation for why this is occurring or any reproducible set of circumstances.
I can accept that I am pushing the envelope on Spaces using both multiple displays and splitting windows from one application across Spaces, so I am not expecting this to work flawlessly (yet). However, it sure would be useful to be able to recover from this when it occurs.
By the way, as a tip I have mapped my mouse button 3 (external mouse with a scroll wheel that has a button) to show Spaces, which has been very handy for me.
One last thing: Does anyone else think it would be cool to have Spaces act more like true individual Desktops? In other words, be able to set background image per Space and maybe even have different files on each Space/Desktop? Files would be more involved since Spaces are less permanent than a real Desktop, but background images seems like an easy thing to be able to code for.

Just to be clear, you CAN run an application and split its windows across different Spaces by dragging those windows in the Spaces view. So open Firefox in Space 1, open a second FF window in Space 1, then F8 and drag the second window into Space 2 and voila. It's somewhat random what happens when you click on the application icon in the dock when you do this, but it does work.
Good point about the background being very resource-intensive. Never mind.

Facetime with multiple students

Does anyone know how I can set up the iPDADS on a cart so multiple students can Facetime with multiple students at another school at the same time?

Ge0ph wrote:
If I have FaceTime on my Mac Book Pro, iPhone and iPad and someone makes a FaceTime call to me, can I take the call on any of those devices?
iPhones: No
Macs, iPods touch (4Gen), and iPads: Yes
In order to be able to answer a call on multiple devices, each device must have identical FaceTime "Caller iD" addresses. iPhones identifiers are unique, not identical, so each FaceTime call to an iPhone is unique to that one device.
Because iPhone uses its unique phone number as its address while your other devices use working email addresses (Macs and iPods cannot have a "phone number"), iPhones cannot be addressed along with any other devices. Nobody but the one iPhone will receive a FaceTime invitation made to its unique number.
You can use identical information on as many Macs, iPods touch (4Gen), and iPads as you like. A FaceTime invitation to that "Caller iD" can be answered on any of them that are powered up and configured to have FaceTime on and working.
If you want to be able to call from one of your Macs, iPods touch (4Gen), and iPads to another, the two devices must have different "Caller iD". Otherwise, it would be like trying to call one extension telephone from another on the same line. It does not work.
If they are all in front of me can I choose what device I want to take the call on?
Yes.
EZ Jim
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

I have a MacBook with the skid-free bottom which is becoming unattached. How should I reattach it?

I have a MacBook which has a non-skid bottom that is becoming disattached. Does anyone know how to re-attach this to the body of the computer? Thanks!

Welcome to Apple Support Communities.
Apple has a worldwide replacement program with multiple replacement options.
To see if your unit qualifies, check the details here:
http://www.apple.com/support/macbook-bottomcase/

Canon ZR40 camcorder and a Macbook with the latest OS.

I have a Canon ZR40 and a Macbook with the latest OS. My iMovie does not recognize the camcorder. Can someone please give me step by step directions on what I should be doing?

1. Turn on the camcorder and set it to VTR or VCR mode (this mode may have a different name on your
camera).
2. Connect the camcorder to your computer using a FireWire cable (the one that came with your
camcorder or any other FireWire cable).
3. If this is the first time you’re importing from a device that records high-definition (HD) video, an HD
Import Setting dialog appears. Even if you aren’t importing HD video now, select Large or Full, and then
click OK.
You can change this preference later if you do import HD video.
4. If the Import window doesn’t open, choose File > “Import from Camera.”
5. If you have multiple devices connected to your computer, choose the device you want to import from the
Camera pop-up menu.
6. Set the switch on the lower-left side of the window to one of the following:
Automatic: Automatically rewinds the tape, imports all of the tape contents, and rewinds the tape
again.
Manual: Lets you rewind and fast-forward the tape so that you can import only the footage you want.
Use the controls to set your tape to the point where you want to begin importing.
7. Click Import.
If you still can’t import video after checking the items above, try the following:
If iMovie doesn’t recognize your camcorder
Turn the camcorder off and on again.
Disconnect the cable from both the camcorder and the computer, and then reconnect it.
Quit and then reopen iMovie.
Restart your computer.
Try using a different cable.
Try using a different computer with iMovie installed.

I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

I updated my macbook with lion and airdrop does not show up in the finder, how could this be?

shldr2thewheel wrote:
If this is the case: How to enable AirDrop over ethernet and AirDrop on unsupported macs running Lion .
http://osxdaily.com/2011/09/16/enable-airdrop-ethernet-and-unsupported-macs/
Interesting. Googling, I see that someone posted that on these discussions as well:
https://discussions.apple.com/thread/3331216?start=0&tstart=0
which mentions what I recall: that Airdrop (as implemented by Apple) would create an on-demand ad-hoc Wi-Fi connection, even if you were already connected to an access point. Normally, you can't connect to multiple Wi-Fi networks, thus the reason for Airdrop only supported on newer Wi-Fi chips.
And Apple's KB:
http://support.apple.com/kb/HT4783

Safari 5.0.4 Problem with multiple overlaying plugins

Hi!
I experience an issue only in Safari on a webpage with multiple overlaying plugins. The overlaying plugin will not render in the browser. For instance, on the mainpage there is a flash-banner. When logging in it opens an iFrame overlaying the banner. This login-frame contains java, but Java will not render or load in Safari. Everything is ok in other browsers and a peculiar thing is that the problem only occurs in Safari on certain types of Macs like MacbookPro and iMac. The ordinary MacBook displays everything ok.
The problem must be related to plugins overlaying cause if i resize or zoom in the browser, it may render. If i go to another subpage without the flash-banner, the java-login appears ok. On another subpage it opens an iFrame containing Flash, but the background is also flash. The same problem again. Flash in the iFrame won`t render.
A workaround is to make Java open in its own process (through the Java control panel), but this aint good since all MacBookPro- and iMac-users have to do this. Flash doesn`t have this option either.
When Safari 5.0.4 was released, the changelog said: "Improved stability for webpages with multiple instances of plug-in content".
Updates Safari on several different Macs, but the problem consists.
Anyone know anything about this?

Hi,
I use ClickToFlash to get around the overlays.
http://clicktoflash.com/
Gives you complete control over Flash content.
Carolyn

How can a family with multiple existing accounts use Home Sharing?

I'd like to use the new Home Sharing feature, but it appears to be restricted to families in which all of the family members share a single user account.
We already have separate accounts for each family member. Is there some way for us to use Home Sharing without abandoning most of our existing accounts, along with all of the purchases made by those accounts? I don't think anyone in this situation would be willing to do that.

Eh. I am not too sure since I have not messed with it much but I do have a great deal of experience with multiple accounts. Each computer can be authorized for multiple accounts. As can iPods. iPods can sync songs/videos/apps from multiple accounts as long as the computer is authorized with them. What I have set up here, is I buy my stuff I want, my parents buy what they want and so do my brothers. When my bro gets something I want I just move it to my computer. That way all our accounts are separate, but if there is something I want I can get it. Also, since the music no longer has DRM, it won't matter. It will play on any computer. What you should see is if you can just do the shared library with multiple accounts. Then if you don't have videos or such, you can get apps or music. Hope this helps!

How do I use your iPhone with multiple iTunes libraries

Hi, I have my music spread out between 3 seperate Itunes libraries on 3 different profiles on my computer. I have the newest generation Ipod Nano, Ipod Shuffle, and Iphone 4s. My Ipod's are both full, so I've decided to start putting music onto my phone. With my Ipod's, I can plug them into one profile on the computer, download the music on the Itunes library that exists on that profile, then do the same with the other profiles with no issue. However when I try to do this with my phone, It asks me to erase the music I have gotten from one Itunes library and sync with the current library, as soon as I plug it in to a different Itunes on one of the other profiles. I have my Iphone configured with the Manually manage music option, and I still haven't found a way to use my Iphone with multiple music libraries. PLEASE HELP

http://support.apple.com/kb/PH12113 - If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
http://support.apple.com/kb/HT1202 - When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time. This includes all content on iPhone and video content on iPod and iPad.
They seem inconsistent as far as the iPad is concerned but in both articles the iPhone appears to only be able to sync to one library at a time.
Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

How to share account with multiple devices?

3 kids with 3 devices - an iPod Touch and two iPads Mini - family shares one account with Apple/iTunes and one library on our family PC. They use FACETIME and MESSAGES with their friends, and they all see each others messages and conversations. How do I fix this? Is there a setting or a way to create sub-accounts off the family account so they can still share the main library for music and video OR do I have to create separate Apple/iTunes accounts for each kid? Is there a setting on their devices that can help? Any help is greatly appreciated. I'm not even sure the right question to ask...

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

How can I merge all of the new FF windows that are open into one window with multiple tabs? Safari has a merge windows feature that I like. This is really nice when conducting reasearch on multiple sites at the same time.

When I clik on weblinks they all open into new windows making it somewhat painful to clik on window in the menu bar to go to each new page. I would rather have a feature that would allow me to merge all of those individual windows into tabs within one page.
== This happened ==
Every time Firefox opened

Thank you. That worked. I was able to open 1 window with multiple tabs. Thanks cor-el!

How can I share only the same music with multiple iTunes accounts

Hello
I hope someone can help. [I am using Windows Vista (Unfortunately J) and iTunes 10]
I am trying to share the same music library with multiple iTunes accounts. Basically, I want to know if there is a way to automatically upload to other libraries when importing new music into my library, vice versa. [Better information below]
Me, my sister and my dad all use iTunes (on different iTunes accounts), and before now we used to have are own music on our own windows user. Due to many duplicates and a loss of hard drive space I have brought an external hard drive and organised all the music.
It was all going well - I first populated all the music onto my iTunes, exported the library, and then imported it on both the other users. However! Because this is only a copy of the library, when I try to import a new CD, it will not show up on there’s until I “Add File to Library”! Originally I thought about using the same library however we each have are own apps etc, that we don’t want to share.
If you need anymore information please ask!
Matt

Hello roaminggnome
Unfortunately the support is down at the moment, I will have a better look later. I did go though the Apple support previously, however I found nothing that worked.
The first thread I came across was “Home Sharing” however no mater what I did, it did not appear in the iTunes sharing list (I did go though the “Show Sharing Networks” support as well)
Secondly, I saw “Using A Single Library With Multiple Accounts On The Same PC” (Something like that) but all this did was let us share the same music location, if I was to rip extra music, it will not show in there library
Matt

TM on MacBook with multiple externals

Similar Messages

Maybe you are looking for