TNS-12666 error occures when using database link

When I am trying to use database link
defined in my database the following error occures:
TNS-12666 Dedicated server: outbound transport protocol different from inbound.
In documentation is stated to resolve such an error to
specify the same protocol in the SQL*Net connect string or alias for the outbound connection as that used for the inbound connection.
I have in tnsnames.ora defined network service name
by which I can connect to such a database by SQL*Plus
without any problems, why can I not do such a thing
via database link?
Thanks a lot for advise, ...

Could you change the following entry in your 'sqlnet.ora' file and try?
SQLNET.AUTHENTICATION_SERVICES = (NONE)

Similar Messages

ORA-01406 error encountered when using database link

I am moving data between two different databases using a database link on Oracle 8.1.5. The database statement looks like:
insert into TABLE@DATABASELINK
(COLUMNS)
select (COLUMNS) from TABLE
One of the database columns is defined as varchar2(4000) on both the source and target database tables. When the data in this column on the source database is greater than 2000 characters, the database query generates the message:
ORA-01406: fetched column value was truncated
I have verified that the target column is defined as varchar2(4000), and have also verified that it is this varchar2(4000) column that is causing the problem. I have also tested out that this error only occurs when the varchar field is more than 2000 characters; if I remove characters so that the source field is less than or equal to 2000 characters, this error is no longer generated and the data is inserted to the target database table.
Is this a limit with database links or some other database parameter that is not set up correctly?
Thanks...Theresa Tucci

Could you change the following entry in your 'sqlnet.ora' file and try?
SQLNET.AUTHENTICATION_SERVICES = (NONE)

Error occurred when using db link in procedure

Hi
I have a problem. As COLL_OWNER, I failed to compile this procedure.
CREATE OR REPLACE PROCEDURE Arch_Session_Order_Queue
IS
-- declarations
BEGIN
-- many lines
SELECT COUNT (1)
INTO v_wols_count
FROM [email protected];
-- many lines
END;
The error says "PL/SQL: ORA-00980: synonym translation is no longer valid"
But when I run it as COLL_OWNER like that,
SELECT COUNT (1) FROM [email protected]
I get the result.
Why that happens? How to resolve the problem?
Appreciate your advice.
Kevin

Hi Jens
Here is the result
SELECT * FROM [email protected] WHERE synonym_name='ORDER_QUEUE;
OWNER SYNONYM_NAME TABLE_OWNER TABLE_NAME DB_LINK
OMDBPP_OWNER ORDER_QUEUE ORDER_QUEUE WOLSPP.WORLD
SELECT owner, object_name, object_type, status
FROM [email protected] WHERE object_name='ORDER_QUEUE';
OWNER OBJECT_NAME OBJECT_TYPE STATUS
OMDBPP_OWNER ORDER_QUEUE SYNONYM VALID
The ORDER_QUEUE on O9IPRD.WORLD is a synonym that points to the real table.
The way that happen is that we have Oracle 10g. The business logic needs to use Oracle 8.1.5 database. Oracle10g cannot talk to Oracle8.1.5. We created an Oracle 9i database having the synonym that points to the real table of Oracle 8.1.5.
I am wondering why I can get the result in SQL but failed to get procedure work.
Thanks,
Kevin

Error When Using DataBase LINK in pl/sql

I have cursor fetching some values from remote db and i m trying to store values in local table (see code below) I can run the select query alone succefully but when i use it inside plsql it fails with error.
DECLARE
TYPE MY_CURSOR
IS
     REF
     CURSOR;
          THE_CURSOR MY_CURSOR;
          V_CT          NUMBER(18);
          V_PSN_ID      VARCHAR2(30);
          V_INTERNET_ID VARCHAR2(75);
     BEGIN
          V_CT                                                                           :=0;
          OPEN THE_CURSOR FOR SELECT PSN_ID, 'TEST' FROM TABLE_A@PRO1 WHERE TABLE_A.SEQ_A<=1000;
          LOOP
               FETCH THE_CURSOR INTO V_PSN_ID, V_INTERNET_ID;
          EXIT
     WHEN THE_CURSOR%NOTFOUND;
           INSERT INTO PSN_EMAIL_SENT_TO@local
                    (PSN_ID, LAST_UPDT_DT
                    ) VALUES
                    (V_PSN_ID, SYSDATE
          V_CT:=V_CT+1;
     END LOOP;
     CLOSE THE_CURSOR;
     DBMS_OUTPUT.PUT_LINE
          TO_CHAR(V_CT)
END;
Error report:
ORA-04052: error occurred when looking up remote object TABLE_A@PRO1
ORA-00604: error occurred at recursive SQL level 1
ORA-04029: error ORA-1775 occurred when querying ORA_KGLR7_DEPENDENCIES
ORA-00604: error occurred at recursive SQL level 1
ORA-01775: looping chain of synonyms
ORA-02063: preceding 3 lines from PRO1
04052. 00000 - "error occurred when looking up remote object %s%s%s%s%s"
*Cause:    An error has occurred when trying to look up a remote object.
*Action:   Fix the error. Make sure the remote database system has run
           KGLR.SQL to create necessary views used for querying/looking up
           objects stored in the database.

You need to create the catalog views that support distributed SQL in your remote database (the database you connect to via db_link).
To create these views, connect "/ as sysdba" and run:
$ORACLE_HOME/rdbms/admin/catproc.sql
which will in turn call several other scripts including: $ORACLE_HOME/rdbms/admin/catrpc.sql (which creates your missing view)
It is best to run the whole catproc.sql script (and not just the catrpc script).
You can run and rerun catproc.sql several times quite safely.
Cheers

SQL Server 2008 R2 { An Error occured when attaching database(s) }

Hello Guys!
I just installed SQL Server 2008 R2 a couple of days ago, on the first day use i can attach database(.mdf) with out any problem.
on the day 2, i keep getting this error:
http://img515.imageshack.us/img515/14/1212i.png
TITLE: Microsoft SQL Server Management Studio
An error occurred when attaching the database(s). Click the hyperlink in the Message column for details.
BUTTONS:
OK
after clicking the Hyperlink this window open:
http://img34.imageshack.us/img34/8766/hyperg.png
TITLE: Microsoft SQL Server Management Studio
Attach database failed for Server 'STARGAZER-PC\SQLSTARMAX'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Unable to open the physical file "E:\New folder\DataBase.MDF". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476
BUTTONS:
OK
in that day i reinstall SQL Server 2008 R2, because I'm so confused. after that i try to attach i still got the same error, what i did is i share the folder where the database is.
i open SSMS and try to attach and i attached without any error...
i think this is the 4rth day, untill now everytime i want to attach a database i got this error, and even i try to share the folder where the database is i still got that error.
any advice guys?
Thanks a lot
jhules
if you want to be happy, find something you love to do and do it for free, then find someone to to you for it.

The Error clearly shows that MDF files and LDF files are not matching or LDF file is corrupted.
You can follow either of the one option below
1. Restore a recent backup rather attaching the MDF file
2. Attach single MDF file without LOG File( Warning: All the log transactions will be gone and new log file will be created)
EXEC sp_attach_single_file_db @dbname = 'AdventureWorks2008R2',
@physname = N'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data\AdventureWorks2008R2_Data.mdf';
Thanks, Aditya Badramraju, _______________________________________________________ Please mark answered if your question is completely answered; vote it as helpful to help others find a solution quicker. This posting is provided AS IS with no warranties
and confers no rights. _______________________________________________________

Broken Pipe Error when using database link

We are using WebLogic 6.1 sp2 / oracle database 8.1.6. / thin drivers.
The connection works fine, unit I try to access a view that has a union and db links
in it.
We have used one or the other (view or a dblink) and it works, but when used together,
we get broken pipe error.
I haven't proven that this is the cause, I will try to setup a test, but I was wondering
if this is a known issue or what ??
thanks
Rich

You need to create the catalog views that support distributed SQL in your remote database (the database you connect to via db_link).
To create these views, connect "/ as sysdba" and run:
$ORACLE_HOME/rdbms/admin/catproc.sql
which will in turn call several other scripts including: $ORACLE_HOME/rdbms/admin/catrpc.sql (which creates your missing view)
It is best to run the whole catproc.sql script (and not just the catrpc script).
You can run and rerun catproc.sql several times quite safely.
Cheers

Timeout when using database link connecting to a remote database

Hi,
I have another strange problem. I have two computers A and B. Both have an Oracle database server instance. I manage the one in B (which is my local computer) but not the one in A (which is a computer where I have a user account and an Oracle account but I don't own or manage).
I tried to establish a database link on the database in B pointing to the one in A. This works.
When I try the opposite, that is, establish a database link on the database in A pointing to the one in B I cannot get it work. I can create the database link but then when I try to use it (e.g., by submitting a "SELECT") it blocks for a long time and finally returns "ORA-12535: TNS:operation timed out". I tried to execute telnet from A to B using the port of the Oracle database server in B and it seems that the connection is established. I tried something similar with tnsping but this does not work, as I get again the timeout. I tried deactivating the firewall on my computer B, but it does not work either (besides, the telnet passes through even if I have the firewall activated).
Any idea?
My TNSPING looks like this:
tnsping '(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = <the-target-ip>)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
I also tried with:
tnsping '(ADDRESS = (PROTOCOL = TCP)(HOST = <the-target-ip>)(PORT = 1521))';
I'm lost... Any ideas are very much appreciated.
Thanks!

From A to B and from B to A can you ping ... post the output surrounded by tags for formatting.
Do the same thing for TNSPING.
What do these computers have in the way of firewalls and antivirus products installed and how are they configured?

ORA-12154 when using Database Link

We're running 11r2 on our servers. I have a primary db and a standby db, using Data Guard. The standby is open for read-only querying. We are not using ASM.
The primary (and thus the standby) have a PUBLIC database link to a third db server.
When I run a query against the database link on the primary: select * from test@MyDBlink; Everything works fine.
When I run the same query against the database link on the standby: select * from test@MyDBlink; I get ORA-12154: TNS:could not resolve the connect identifier.
I check that the db link exists on the standby. It does.
I go to command prompt on the standby and run "tnsping MyDBlink". It executes fine. It says "Used TNSNAMES adapater to resolve the alias" and sure enough, MyDBlink is referenced in the TNSNAMES.ORA.
I also run "tnsping IP-of-MyDBlink" to doublecheck. No issues.
What is going on that is blocking the db link on the standby? Many reports utilize that standby and I'd hate to deny them the functionality of a db link.
Thanks

893968 wrote:
We're running 11r2 on our servers. I have a primary db and a standby db, using Data Guard. The standby is open for read-only querying. We are not using ASM.
The primary (and thus the standby) have a PUBLIC database link to a third db server.
When I run a query against the database link on the primary: select * from test@MyDBlink; Everything works fine.
When I run the same query against the database link on the standby: select * from test@MyDBlink; I get ORA-12154: TNS:could not resolve the connect identifier.
I check that the db link exists on the standby. It does.
I go to command prompt on the standby and run "tnsping MyDBlink". It executes fine. It says "Used TNSNAMES adapater to resolve the alias" and sure enough, MyDBlink is referenced in the TNSNAMES.ORA.
I also run "tnsping IP-of-MyDBlink" to doublecheck. No issues.
What is going on that is blocking the db link on the standby? Many reports utilize that standby and I'd hate to deny them the functionality of a db link.
ThanksMost people with this problem don't understand that the dblink is just another client, no different than sqplus running on the same machine - and therefore the link uses the tnsames in the ORACLE_HOME of the database containing the link. But it seems from the steps you've described that you've grasped that. The only thing I can think of off the top of my head is when you try sqlplus from the standby server you are hitting a different tnsnames than the one the database is using.

Runtime error occurs when using DropdownByKey

I run into a runtime error when I use the DropDowByKey with fixed value set: the value seletedKey = "001" in DropDownByKey "DDBK_APP_STATE" does not exist in the value list and is not initial either. But I have already added the value pair of the selectedKey using
     "NODE_INFO->SET_ATTRIBUTE_VALUE_SET(
          NAME = 'APP_STATE'
          VALUE_SET = LT_VALUESET )." and I can select it from view. But when I use the attribute bound to the dropdownbykey in select statement as where condition and bind result into table. Before the screen reflash , the error occurs.

I have two dropdownbykeys, DROP1(bound to attribute APP_AGENT),DROP2( bound to attribute APP_STATE). Selecting the first will change the content of the other.
The code in the onSelect event of the drop1, which will change the select list of DROP2:
DATA:NODE_INFO TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
DATA: LT_VALUESET TYPE WDY_KEY_VALUE_TABLE,
      L_VALUE     TYPE WDY_KEY_VALUE.
NODE_INFO = WD_CONTEXT->GET_NODE_INFO( ).
NODE_INFO = NODE_INFO->GET_CHILD_NODE( 'NODE_SEARCH' ).
   "**************************set value set for drop down***************
    DATA lo_nd_node_search TYPE REF TO if_wd_context_node.
    DATA lo_el_node_search TYPE REF TO if_wd_context_element.
    DATA ls_node_search TYPE wd_this->element_node_search.
    DATA lv_app_agent LIKE ls_node_search-app_agent.
    DATA lv_app_state LIKE ls_node_search-app_state.
navigate from <CONTEXT> to <NODE_SEARCH> via lead selection
    lo_nd_node_search = wd_context->get_child_node( name = wd_this->wdctx_node_search ).
get element via lead selection
    lo_el_node_search = lo_nd_node_search->get_element( ).
        lo_el_node_search->get_attribute(
      EXPORTING
        name = `APP_STATE`
      IMPORTING
        value = lv_app_state ).
get single attribute
    lo_el_node_search->get_attribute(
      EXPORTING
        name = `APP_AGENT`
      IMPORTING
        value = lv_app_agent ).        -
get the value of DROP1
clear the selected value of drop down
    lo_el_node_search->set_attribute(
      EXPORTING
        name = `APP_STATE`
        value = '' ).----
I want to clear the selected value of DROP2
IF lv_app_agent IS INITIAL.
L_VALUE-VALUE = 'SUBMIT'.
    CLEAR L_VALUE-KEY .
    INSERT L_VALUE INTO TABLE LT_VALUESET.
NODE_INFO->SET_ATTRIBUTE_VALUE_SET(
          NAME = 'APP_STATE'
          VALUE_SET = LT_VALUESET ).
exit.
ENDIF.
CASE lv_app_agent .----
there are 2 cases
WHEN 'SUPP_APP'.
    L_VALUE-VALUE = 'APPROVE'.
    L_VALUE-KEY = '1'.
    INSERT L_VALUE INTO TABLE LT_VALUESET.
    L_VALUE-VALUE = 'INITIAL'.
    L_VALUE-KEY = '0'.
    INSERT L_VALUE INTO TABLE LT_VALUESET.
WHEN OTHERS.
    L_VALUE-VALUE = 'APPROVE'.
    L_VALUE-KEY = '1'.
    INSERT L_VALUE INTO TABLE LT_VALUESET.
    L_VALUE-VALUE = 'INITIAL'.
    "CLEAR L_VALUE-KEY.
    L_VALUE-KEY = '000'.
    INSERT L_VALUE INTO TABLE LT_VALUESET.
    L_VALUE-VALUE = 'REJECT'.
    L_VALUE-KEY = '2'.
    INSERT L_VALUE INTO TABLE LT_VALUESET.
ENDCASE.
NODE_INFO->SET_ATTRIBUTE_VALUE_SET(
          NAME = 'APP_STATE'
          VALUE_SET = LT_VALUESET ).
Then in the another method, I will fetch the value of attribute APP_STATE. I can successfully get the value and put it into where clause and get result. But I will get a runtime error then.

GETWA_NOT_ASSIGNED error occured when using FM REUSE_ALV_GRID_DISPLAY

Hi All,
I am using the Fm REUSE_ALV_GRID_DISPLAY to display output in the ALV grid.
I am getting the following error
"Field symbol has not yet been assigned."
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32820).
This error may occur for any of the following reasons:
    - You address a typed field symbol before it is set using ASSIGN
    - You address a field symbol that points to a line in an internal table
      that has been deleted
    - You address a field symbol that had previously been reset using
      UNASSIGN, or that pointed to a local field that no longer exists
    - You address a global function interface parameter, even
      though the relevant function module is not active,
      that is it is not in the list of active calls. You can get the list
      of active calls from the this short dump.
I used the Fm as :
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK                 = ' '
     I_BYPASSING_BUFFER                = 'X'
     I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = sy-repid
    I_CALLBACK_PF_STATUS_SET          = ' '
     I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
     I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    I_CALLBACK_HTML_END_OF_LIST       = ' '
    I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = ' '
    I_GRID_TITLE                      =
    I_GRID_SETTINGS                   =
     IS_LAYOUT                         = t_layout
     IT_FIELDCAT                       = ls_slis_fieldcat
    IT_EXCLUDING                      =
    IT_SPECIAL_GROUPS                 =
    IT_SORT                           =
    IT_FILTER                         =
    IS_SEL_HIDE                       =
     I_DEFAULT                         = 'X'
     I_SAVE                            = 'A'
    IS_VARIANT                        =
    IT_EVENTS                         =
    IT_EVENT_EXIT                     =
    IS_PRINT                          =
    IS_REPREP_ID                      =
    I_SCREEN_START_COLUMN             = 0
    I_SCREEN_START_LINE               = 0
    I_SCREEN_END_COLUMN               = 0
    I_SCREEN_END_LINE                 = 0
    I_HTML_HEIGHT_TOP                 = 0
    I_HTML_HEIGHT_END                 = 0
    IT_ALV_GRAPHICS                   =
    IT_HYPERLINK                      =
    IT_ADD_FIELDCAT                   =
    IT_EXCEPT_QINFO                   =
    IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
    E_EXIT_CAUSED_BY_CALLER           =
    ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_output
   EXCEPTIONS
     PROGRAM_ERROR                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Any help on this would be appreciated,
Thanks in advance.
Sharat.

This is the error i get when i try to read the input data entered on the ALV grid. The code shown is from the class cl_gui_alv_grid.
183           translate ls_cells_temp-value to upper case.   "#EC TRANSLANG
184           assign ls_cells_temp-value to <l_currency>.
185         else.
186           assign ls_cells_temp-value to <l_currency>.
187           clear <l_currency>.
188         endif.
189         if <l_currency> is initial.
190           assign component ls_fieldcat-qfieldname
191                            of structure <ls_wa> to <l_currency>.
192         endif.
193         if <l_currency> is initial.
194           assign ls_fieldcat-QUANTITY to <l_currency>.
195           if sy-subrc ne 0.
196             assign space to <l_currency>.
197           endif.
198         endif.
199       endif.
200     else.
201       if not ls_fieldcat-currency is initial.
202         assign ls_fieldcat-currency to <l_currency>.
203       elseif not ls_fieldcat-quantity is initial.
204         assign ls_fieldcat-quantity to <l_currency>.
205       else.
206         assign space to <l_currency>.
207       endif.
208     endif.
209
210 *   If field has not DDIC referencen
211     if ls_fieldcat-ref_table is initial.
212 *--   Formal field check without DDIC reference
>>>>       call method me->formal_field_check_no_ddic
214         exporting
215           i_currency    = <l_currency>
216           i_value       = ls_cells-value
217           i_row_id      = ls_cells-row_id
218           i_tabix       = l_tabix
219           is_fieldcat   = ls_fieldcat
220         importing
221           eflg_invalid = eflg_invalid
222         changing
223           c_field       = <l_field>
224           ct_good_cells = et_good_cells
225           ct_mod_cells = et_mod_cells.
226     else.
227 *--   Formal field check with DDIC reference
228       call method me->formal_field_check_ddic
229         exporting
230           i_currency    = <l_currency>
231           i_value       = ls_cells-value
232           i_row_id      = ls_cells-row_id

Error occurs when using the LeCroy Waverunner driver.

Hi
I downloaded a Lecroy Waverunner driver in Instrument Driver Network and installed it. However, when I used it in block diagram. An error message "lcltxxxx_32.DLL is not a 32-bit DLL" appeared. What's the matter with that?
Bill.

Hello Bill,
It sounds like you have the wrong IVI engine installed. The current LeCroy Waverunner software on the website requires the 1.83 IVI Engine and NI-VISA 2.5 or later. If you have old versions of the IVI engine and/or NI-VISA, remember to delete the old versions before reinstalling.
Regards,
Ray Kong

Error occured when using flash 9 in firefox

I installed Flash CS3 Professional (trial) for doing
assignment. After that, I think flash player also be upgraded to
version 9. It's no problem in IE, but when browsing website with
using firefox, it keeps pop up windows which ask
"Where is the debugger or host application running?", you can
choose localhost or other machine. Actually, i run it in my hom pc,
so it should be "localhost".After keep answering the same
question(it seems be asked for each flash), then it pop up "A
connection to the Debugger or Profiler cound not be established by
Adobe Flash Player 9."
how can I fix this problem??
please give me a hand. Thanks a lot.

Sorry, there is a bug in the developer guide on page 183, it says to use " and you need to use '. Hopefully The specified item was not found. or Thomas Jung will get it fixed.
The code below activates successfully.
John
context test2 {
    entity table1
        key field1 : String(10);
        field2 : String(10) default 'dummy';

Error occured when using javap (Java Class File Disassembler)

Hi,
I have tried to use Java Class File Disassembler by using javap and i'm getting the error shown below,
C:\> javap abc.class
ERROR: Could not find abc.class
abc.class present in C:\ drive.
Please let me know how to solve the problem
Thanks in Advance
Soundar

Hi,
Thanks for your information, it works fine. Please let me know is there any option to display the method and variable implemation in abc.class.
I have tried javap abc it displays the method name only.
Thanks in advance,
Soundar

Error occurs when using DBDataSource.SetValue method in sales order

Is it possiable to use the DBDataSource.SetValue method to update a cell in the Sales Order document
My code , but I am getting an error
Dim oDBDataSource As SAPbouiCOM.DBDataSource
oDBDataSource = oform.DataSources.DBDataSources.Item("RDR1")
oDBDataSource.SetValue("Price", 1, "111.22")
The following code works, but I do not want to use it because the cursor need to move to the cell before changing the value.
oMatrix.Columns.Item("14").Cells.Item(RowNum).Specific.value = 111.22
Sincerely yours
Riade Asleh

Well , I do not want to do it this way
I want to change the value using the setvalue method of the DBDatasource Object
I want to avoid the cursor from going to the cell for update or read.
Refer to orignal question (first question)
Sincerely yours
Riade Asleh

Error occurred when use foreign Jms server[JMSClientExceptions:055142].

I want to use a foreign Jms server(Tibco EMS), after I have config the JNDI of foreign server,connectionfactory and destinations, the correct JNDI name can be find on the JNDI tree.
Then I deploy a demo mdb ear on the weblogic(version is 10.3),there's warnning tag on the ear application, and there is error message in the log:
<2011-1-10 上午10时15分07秒 CST> <Warning> <EJB> <BEA-010061> <The Message-Drive
n EJB: MDBDemo is unable to connect to the JMS destination: NotifyAlertAlertQueue. The Error was:
weblogic.jms.common.InvalidDestinationException: [JMSClientExceptions:055142]Foreign destination, Queue[notify.alert.alertQueue]>
NotifyAlertAlertQueue is the JNDI name of the destination defined on the weblogic console,and the same as ems jndi name for queue notify.alert.alertQueue.
It seems that the application has find the queue correctly, but why it throw that exception[JMSClientExceptions:055142]?
Thanks for any help.
Edited by: 826761 on 2011-1-9 下午6:40

I suspect that somehow your configuration is messed up and the MDB ended up using a WebLogic connection to access a TIBCO EMS destination.
Please make sure that your JMS server configuration maps a TIBCO connection factory jndi name to a jndi name in WebLogic server JNDI tree, a TIBCO destination jndi name to a jndi name in WebLogic server JNDI tree, and your MDB configuration refers to the jndi names in the WebLogic JNDI tree.
Regards.

TNS-12666 error occures when using database link

Similar Messages

Maybe you are looking for