To add Language selection option on Selection Screen

Hi All,
I have one Report Writer Report.
In that Report I have created Basic Sets, Single sets and Multi Sets for G/L Account.
I need to output this Report in two different language.
1) Engish
2) Chinese
But I need to put the option on Selection Screen for Language Selection (whether English or Chinese).
How to add this option on Selection Screen. Please Guide me soon.
Regards,
Rishi

Hi Ashok,
But when I hev created the sets, I have given the description of G/L Accounts in English. But when I will run the Report using Cinese as Logon language, how output will come in Chinese.
1) Is there a need to maintain /L Accounts in Chinese language.
2) or Shall i create the sets by giving description for G/L Accounts in Chinese If Yes then how to hadndle at run time..
please guide I am new to Report writer.
Regards,
Rishi

Similar Messages

How do I add a selection screen parameter to get a application server file

Hi All..
Can you please suggest how can we add a selection screen parameter to get a application server file ?
Thanx in Advance...
Regards,
Deepak

Parameter def :
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 02(30) text-005 FOR FIELD p_xlfil.
PARAMETERS: p_xlfil LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Browse
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xlfil.
PERFORM ws_get_filename USING p_xlfil.
FORM ws_get_filename USING p_xlfil.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 def_path = 'C:'
 mask = ',Excel,*.xls,All,*.*.'(100)
 mode = 'O'
 title = 'Title'(101)
 IMPORTING
 filename = p_xlfil
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc NE 0.
 CLEAR p_xlfil.
ENDIF.
ENDFORM. " WS_GET_FILENAME
Regards
Oops i did not read "application server"
Use FM F4_FILENAME_SERVER and not F4_FILENAME/WS_GET_FILENAME.
Message was edited by:
 Raymond Giuseppi

Language selection screen after every recharge

I have a 40GB 2nd generation Ipod. Every time I recharge it and power it back on it goes to the language selection screen. Is there anyway to fix this?
Thanks
-drauch
2G IPOD

Looks like it. I tried this and I had no luck: https://discussions.apple.com/message/7540488#7540488

My iPod is stuck on Language Selection screen

My iPod Nano 7th generation is stuck on language selection screen. Language can be selected but "Done" button cannot be pressed.

Sounds like a hardware malfunction with the device. Could be the clickwheel itself or the logicboard. Either way, you'll need to send your iPod in for service if you want to be able to use it again.
B-rock

IPod Nani 5th Generation hangs at language selection screen

As the title states, I have 2 iPods that both 'hang' at the Language Selection Screen. Able to reset iPod and iTunes see's it but always hangs at same place. Any ideas please?
Cheers

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The language selection screen just comes up over and over again. I'M FED UP! I have done the system restore several times to no avail. WHAT DO I DO?

I upgraded my ATV and now when I select English during language selection, it goes no where. The language selection screen just comes up over and over again. I'M FED UP!
I have done the system restore several times to no avail.
WHAT DO I DO?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation.

IPod getting stuck at the Language Select screen. HELP PLEASE!

I couldn't turn my iPod on after charging it, so I reset factory settings. After that the buttons/clickwheel didn't work, and the only way I could turn my iPod on was with the hold switch, and then I would be stuck at the language select screen. When my friend suggested I do a hard reset (even though I didn't think the buttons worked) I did so and realized that I could also turn it on with that method, but I'm still stuck at the language screen.

I don't know what a "hard reset" is.
Have you tried a restore?
See: How to restore the iPod to factory settings.

Add multiple selection screen

Hi!
I've set up an initial screen (selection screen) in my dynpro-program, with company code (BUKRS) as input field. This screen has been developed using the Screen Painter and is of the screen type 'Normal'.
I have managed to add a search help to the input field, but how can I add a multiple selection screen to it?
Thank you for all your help!
- Mari Virik

HI,
Create button beside BUKRS field.
and use FM K_CMPERS_MULTIPLE_SELECTION when the button is pressed.
this FM provides u a multiple selection screen. Use 'R' for Fieldtype.
data: parm like cmpersdata occurs 0.
call screen 300.
*& Module USER_COMMAND_0300 INPUT
 text
module USER_COMMAND_0300 input.
case sy-ucomm.
when 'MULT'.
CALL FUNCTION 'K_CMPERS_MULTIPLE_SELECTION'
EXPORTING
 p_fieldtype = 'R'
 p_fieldname = 'MATNR'
 p_tablename = 'MARA'
tables
 pt_parm = parm
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endmodule. " USER_COMMAND_0300 INPUT
Regards
CNU

Ipod stuck on language selection screen

I have an old 2nd gen ipod nano that i found lying on my desk, so i decided to add songs to it (it's formatted to windows). Since my playlist is sort of small i decided to add songs off of my buddies' laptop, which is a macbook. After selecting all the songs i wish to add to my old ipod, the ipod is stuck on Language Selection and the click wheel refuses to work. Is there anyway to reverse this without having to completely reset the ipod?

Please don't steal music.
Cheers!
-Bryan

SCCM stops at "Set Up Windows" Language Selection Screen

This is my scenario:
1. I'm Using SCCM 2012 R2 w/MDT2013 to deploy Windows 7x64 image that contains 4 languages already injected into the .wim file.
2. The UDI is configured so that users can choose language, time, keyboard and time zone.
3. The image deploys fine but always stops at "Setup Up Windows" phase and prompts for an manual input from the user to choose a " language" even though the language was already selected at the beginning of the UDI sequence. Can anyone
help explain why this is occurring and more importantly how to fix it? I've searched through many forum but none with the exact problem I'm having. Once I choose the language again, it continues and the deployment is successful but I would like to avoid this
from occurring as it never had in the past. I noticed this behavior since we upgraded to SCCM R2.
Many Thanks!

I use this as my unattended.xml as I have 2 languages in our Win7 x64 deployment to stop the language prompt screen, there may be extra stuff in there as I never tried to trim it after I got it sorted.
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CopyProfile>true</CopyProfile>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:k:/sources/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Frozen on language selection screen

I've had problems on and off with my current Ipod - it has periods where it freezes a lot, but usually i can fix it by restarting. However just tonight, now whenever I restart it it goes to the screen offering a choice of languages, but I can't select any one, moving the wheel doesn't work. It isn't recognised by my computer either in iTunes or the Ipod updater, and it doesn't appear in Device Manager. And as i say, resetting it only takes you back to the language screen.
Is there anything at all I can do? I'm out of ideas. It's past the first year since i had it too
Ipod photo (60gb) Windows XP

Acer wants me to send into their service center in Temple Texas for service. I would like to know if anyone else has experienced this issue with an Acer Android Iconia Model similar to this. Looking forward to comments or information relative to this issue.

Add selection screen field in standard program

Hi Friends,
I have a requirement to add a language selection screen field in standard programs (RFSUSA00, RFITEMGL, RFIDPL11, RFBELJ10_NACC, RFIDPL06, RAGITT_ALV01 , RFASLD15 , S_PL0_86000028 , RFCASH00 , RFIDPL18).
This is such that when I select the appropriate language the output should get printed in that paticular language. Can someone help me with how to do this?
Regards,
Dikshitha

Hi Dixitha,
Use implicit enhancement option.
Desplay the report in se38.
In Menu, go to Edit > Enhancement Operations > Show Implicit Enhancement Options.
The system will show you lines (in color) where you can add your enhancement.
This function will allow you to add business rules, substitute fields, do extra calculations, and other unique, non-standard requirements.
Reddy

Text for block and select option on the selection screen of Logical Databas

Hi,
I have copied a standard program (RFBELJ10) which is making use of LDB (BRF) and created a custom program. Now, the requirement is to add a selection screen option to the custom report and do some validation on the data extracted. I have added the select option and provided a text (lets say "Segment") to it using menu path Goto --> Text Elements --> Selection Texts and activated. But this text is not displayed on the screen when i execute the report. It is showing the string which i used while defining the select option.
Also i need to provide a frame and title to it. but its not displayed.
i have written the following code for that:
SELECTION-SCREEN: BEGIN OF BLOCK seg WITH FRAME TITLE text-h01. " Segment
SELECT-OPTIONS: s_segmnt FOR faglflexa-segment. " Segment
SELECTION-SCREEN: END OF BLOCK seg.
Could you please help me in getting the texts displayed for fram and the select option?
Thanks,
Phani

Solved the problem. I have maintained the text in German. So, when I execute the report in english, it is not displaying the text. I have translated the texts to English and is working fine now.

Add selection screen at FBL1N

Dear all,
I wonder how to add a selection screen in order to display all the open item I selected for a given vendor in a different view mode. Currently if I choose from FBL1N (after having executed a select on open items for a given vendor for instance) "Environment" and then "Display document" I have in term of result one document per screeen and per item while I would like to have when choosing "Display document" a selection screen and then in term of result a list in one screen with item and details that I would have selected.
Do I have to work on the "PAI module" and "Screens" of the SAPMSSY0 program?
Regards.
Nozome.

I think the 'filter' option already provides the functionality you want. Click on the filter icon and then choose the document number and after that enter the document numbers you want to operate on. This will reduce your list to these documents. Then when you use environment->display document it will limit you to the documents you have filtered on.
I think the option of modifying the standard program is a bit extreme. The program to change would be RFITEMAP but if you realy wanted to do this I believe you should at least clone it rather than change a sap standard abap.

Add selection-screen parameter in HUMO

Hi everybody,
I need to add selection-screen parameters in transaction HUMO.
I tried to create an new specific program with a subscreen. This subscreen is a copy of subscreen 2050 of program RHU_HELP and I had my news parameters to it.
But the problem is that I don't know how to call my subscreen instead of subscreen 2050.
I see in debug the structure ORDER_CRITERIA which contains the value of program and screen but there is no enhancement point in "AT-SELECTION-SCREEN OUTPUT" so I can't replace the program and screen values by my specifics.
I set it in the "INITIALIZATION PART" but it function only one time so it is not good.
Have you an idea to solve my problem or another way to add news selection-screen parameters in HUMO?
Thanks for your help.

Hi Dixitha,
Use implicit enhancement option.
Desplay the report in se38.
In Menu, go to Edit > Enhancement Operations > Show Implicit Enhancement Options.
The system will show you lines (in color) where you can add your enhancement.
This function will allow you to add business rules, substitute fields, do extra calculations, and other unique, non-standard requirements.
Reddy

To add Language selection option on Selection Screen

Similar Messages

Maybe you are looking for