To add new key figure in existing info cube (BI 7.0)

I m using BI 7.0
How can I add new Key figure in my existing info cube?
Thanks
KS

hi,
check the following the links
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
thread's regarding remodeling
Remodeling Toolbox
Remodelling option in 7.0
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=remodeling+&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
hope this help you
happy new year 2008
regards
harikrishna N

Similar Messages

  • Add new key figure and characterstic into cube without touching historical

    Hi ,
    I have cube in prodcution which has historical data of last 4 years .
    Now buisisness is asking me to add one keyfigure and and one characterstic to cube without tcouchingand next load these 3 fileds to be populated .
    is it possible to this ?
    Please let me know

    check the blog by Nagesg Ganisetty regarding remodelling option available in 7.0.
    thats a good blog and very informative.
    http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm

  • Add update rule for new key figure in one info struc

    Hi, everyone
    I would like to know how to add update rule for new key figure in one info struc.
    Thanks ahead.
    Eric

    1)I have created the update rule for one info structure
    2)add one key figure in the info structure due to business requirement
    3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
    Can anybody tell me how to do with it?
    Any answer will be appriciated.

  • How To Add New Key Figure in Manual Planning

    Dear All
    Please Help
    I Already implement BPS for 2 year.
    Now user want to add new key figure in Cube.
    I already add new key figure to cube and activated it.
    But in Manual Planning, The new key figure not show in selection
    what I must do?
    Please Help.
    Thanks

    Hi,
    not all key figure types are supported in BPS.
    1. All key figure types must have aggregation SUM, SUM.
    2. Supported key figure types:
    - amout
    - quantity
    - number (integer, float, dec)
    - time, only type DEC
    - datum, only type DEC
    All other key figures are filtered out and are not available in BPS.
    Regards,
    Gregor

  • Hi Gurus, To Add New key figure in BW 3.5 flow ODS- Infoset

    Hi Gurus ,
    I have rquerimennt to add a new  keyfigure in ODS and then into  Infoset .  The histrorical data for this keyfigure is not needed . Can you please let me know what the are changes needed to be done in Transfer structure -> cs->updaterules->ods->infoset.
    should i delete data from dso before I add keyfigure?
    Rehards
    sriram

    Hi
    are going to get the values for the new key figure from source or is it going to calculate in BW side?
    If yes, then add that key figure in source DS, replicate the same BW system.
    Now add this key figure to your ODS and activate.
    create transformation for this. and activate.
    as this is key figure, you will get data for this in info set automatically.
    Regrads,
    Venkatesh

  • Add new key figure to an Infocube

    Hi Experts
    I need add two new key-figure to the Infocube with data.
    Can I do this, or I need have an empty cube in order to made the changes?
    Thank you in advance!

    Yes the same, no need to delete data unless you recategorize the existing characteristics the same is true for the ods too. Adding is not issue, only removing.
    thanks.
    Wond

  • Add new key figure with characteristics in report painter

    Hi expert,
    I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
    When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
    Please kindly advice how to create in new characteristics in report painter?
    Thanks.
    p/s : profit center number is same with segment number
    regards,
    ng chong chuan

    Hi,
    "segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
    best regards, Christian

  • Adding a new key figure to Info Cube

    Can I add a new key figure to an existing Info cube in which data is loaded?
    Assume that In Info Cube we have the following.
    Stu Id -- Characteristic
    Maths , Physics , Chemistry -- Key figures
    These are the info objects which are already available and transfer rules are already available for the same in the infosource.
    Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
    I have tried the following steps ,  but could not get the solution.
    1). Create a new key figure info object (total).
    2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
    3). Add the new key figure to the info cube.
    4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
       When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
    Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.
    Thanks

    1.add new Keyfigure to Infocube.
    2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
    activate update rules and InfoProvider.Check all are active or not..
    by using Export generate datasouce ,you populate data(historical data)  to new keyfigure as well.Then you have to delete historical data requests.
    or iyou can create formula in query designer as well as srinivas suggested.that would be better option.

  • Adding new key figure in Info structure

    Hi all,
    I am in a need to add a new key figure to our info structure here in my company.
    The way I understand it is, it would be best to create a NEW info structure and copy all existing key figure and characteristic and then insert my new key figure into this and rewrite the macro if required.
    So my question is
    1. How to determine which info structure is currently in use in my company? If i check in MC89 - the key figures match what is in Info structure S076. So is it safe to assume that we are using standard S&OP in my company? Is that a correct way to identify the currently used info structure?
    2. For our KMAT, when i open a planned order I see that there in another info structure (not S076) under configuration tab. So can we have diff info structure in use at a same time ?
    Please guide.
    Thanks,

    Hi Nisha,
    1. First of all, How would I determine which info structure is being used at this time in my company?
    I need to know this so that when I am creating my own custom (S500 - S999) info structure, i can copy the existing KFs and Characteristics and add them to my info structure and then Add a specific key figure on top of that.
    Info structures are nothing but tables so in se16 you can check which are Info structures are having update values.
    Yes you can add the specific key figure on existing self defined info structure in MC22 after that you need to generate it.
    2. Can multiple info structure be in 'use' at the same time in any scenario? 
    For self defined info structure are application specific you can not have multiple info structure for same scenario. If you take the example of flexible planning with self defined info structure then you can transfer the demand from only one info structure.
    Regards,
    R.Brahmankar

  • Add of new key figure.

    Hi..
    is it possible to add new key figure in the planning table of the ICH.
    for ex. there are key fig like demand, planned receipt, firm order in the SMI Monitor (Supplier view of ICH) i want to add new key fig in that grid...is it possible..
    Plz suggest...
    Thanks in advance..

    Hi Rupesh,
    Were you able to achieve this? I would be really thankful if you could jot down the steps you followed towards achieving this.
    Thanks,
    Puja.

  • Addition of new key figure in ODS

    Dear all,
    In ODS, delta is loaded everyday through process chain. Now according to business requirement, we need to add one more key figure in it. I don't have to map it with any of the R/3 field. Only i have to create update routine to assign value in it using already existing key figure.
    Can i directly add new key figure in the ODS? Will it affect my data present in ODS as well as daily delta load process?
    If i can do this, can i assign exact 'key figure' value for the existing data also?
    Please guide me for the same. We are using BW 3.5.
    Regards,
    Omkar.

    Hi,
    I am not sure that it is true that you need to delete data.  I am sure one can add a field to the ODS without deleting it.  The field will remain blank after creation, unless you fill it:
    1.  manually using a flat file for past data; mapping will work for subsequent data
    2.  Use a self reference if the value is already present in another key figure.
    The change may take a long time to activate depending on the following:
    1.  Size of the ODS
    2.  Existence of indexes.
    However,  as you are running a delta you need to be careful of the delta queue if you also intend to touch the datasource.
    Cheers....

  • Implications of adding new key fields to existing table

    Hi All,
    I have searched forum regarding this. But didn't find exact answer.
    We are planning to add new key fields to existing Ztable. I want to know the implications of this.
    I have checked the where used list of table and found no impact. Only one point is making me to think again and again.
    If we add key fields to existing table then we have to adjust the table from SE14 to activate it. But this adjustment doesn't ask for TR.
    So if i release my TR, entries in other systems will also be adjusted accordingly??? Business is OK with the new fields values to be blank for existing entries.
    Thanks,
    Vinod.

    Yes the data in transported  systems will also be adjusted. If this table contains too much data make transport at late hours because it will take long and table can't be used while it's adjusted. In this adjustment process data is copied to a temporary table and moved back to original table using move-corresponding command after key added. There will data loss if you remove a key or key fields field length but in your case it shouldn't be a problem.
    Edited by: Gungor Ozcelebi on Jul 2, 2009 9:18 AM

  • New key figures in multiCube not available in old query

    Hello every one,
    I created new key figures in a mult Cube but not I wish to put them in the query based on this multi Cube and the figures are not there.
    I already actived the multi Cube, also sign on and sign off the BEx, generate the query using rsrt but until now no solution.
    Can you help me out?
    Thnaks

    did you add the fields using the query designer....
    also make a double check that this query is based on that multiprovider...
    rgds, Ghuru

  • Adding new key figures to DP planning area

    I am using APO DP.
    When adding new key figures to a planning area, is there any way of avoiding having to deinitialise and then re initialise the planning area?
    Thanks for any advice on this...

    First of, let us know which version of DP are you using.
    If you are using 7.0, all you need to do is right click on your planning area and select Change Keyfigure setting and you should be able to update the key figures there.
    The below is from SAP help for SAP APO 7.0, you should be able to add the key figure without deinitializing the planning area.
    Key Figure Settings
    Here you can change the properties of the key figures of a planning area, if the planning area has already been initialized. You can also add or delete key figures. However, you can only delete key figures that are no longer used in planning books, data views, macros, or demand forecasts. You can find out in which objects a specific key figure is used with the where-used list.

  • How to append DATA_PACKAGE strucutre to include new key figures?

    Hi,
    Iu2019m a newbie to ABAP and need some help with a start routine in BW 3.5
    In the source DSO I only have  the u201CYTD amountu201D key figure. The destination DSO should also contain the key figures u201CCurrent month amountu201D (ZAMTMO) and u201CLast 12months amountu201D (ZAMTLTM). So in the transfer rule I want to have a start routine to do some calculations and add the 2 new key figures.
    I use an internal table LCYEARDATA do the calculations:
      DATA: LCYEARDATA type sorted table of /bic/aZHYP3_O00
            with unique key CALMONTH /BIC/ZHYP_ACC /BIC/ZHYP_ENTI
            /BIC/ZHYP_SUBA /BIC/ZHYP_VERS
            with header line.
    IF DATA_PACKAGE IS NOT INITIAL.
       LOOP AT DATA_PACKAGE.
    *Get the YTD This Month.
        READ TABLE LCYEARDATA
            WITH KEY
              CALMONTH = DATA_PACKAGE-CALMONTH
              /BIC/ZHYP_ACC = DATA_PACKAGE-/BIC/ZHYP_ACC
              /BIC/ZHYP_ENTI = DATA_PACKAGE-/BIC/ZHYP_ENTI
              /BIC/ZHYP_SUBA = DATA_PACKAGE-/BIC/ZHYP_SUBA
              /BIC/ZHYP_VERS = DATA_PACKAGE-/BIC/ZHYP_VERS.
          IF sy-subrc IS INITIAL.
              YTDTHISMONTH  = LCYEARDATA-AMOUNT.
    ENDIF.
    *Last 12 Months = (YTD Last Year - YTD Month Last Year) + YTD This Month
        LAST12MONTH = YTDLASTYEAR - YTDMONTHLASTYEAR + YTDTHISMONTH.
    *Save MONTHLYVALUE and LAST12MONTH to the DATA_PACKAGE.
         DATA_PACKAGE-ZAMTMO = MONTHLYVALUE.
         DATA_PACKAGE-ZAMTLTM = LAST12MONTH.
         modify DATA_PACKAGE.
        ENDLOOP.
    ENDIF.
    Since the DATA_PACKAGE have the same structure as the source DSO, and donu2019t contain the new key figures, I canu2019t add the new calculated key figures at the end of the loop. I get an error message saying that ZAMTMO and ZAMTLTM canu2019t be found.
    So the basic question is: How do I append the structure of the Data Package so it can include the new key figures?
    Best,
    Johan

    Hi Karsten,
      Similar post... have a look...
    Re: data package error
    DATA: varighed TYPE i.
    wa_temp type DATA_PACKAGE_STRUCTURE OCCURS 0
    WITH HEADER LINE.
    LOOP AT DATA_PACKAGE into wa_temp.
    varighed = 100.(<b>What this means....?? condition..?</b>)
    wa_temp-/bic/iotvarig = varighed.
    wa_temp-/BIC/IOTOBJFOR = 'TEST'.
    -->> <b>you have to write modify wa_temp</b>.
    modify wa_temp.
    ENDLOOP.
    REFRESH DATA_PACKAGE.
    LOOP AT wa_temp.
    APPEND wa_temp TO DATA_PACKAGE.
    ENDLOOP.
    Hope it Helps
    Srini

Maybe you are looking for

  • Airport express loses signal but software says it's OK, and light is green?!

    My AirPort express wireless 7.6.4 has just stopped working although the light is green and the Airport Utility software in the computer (10.9.5) says the connection is "excellent". I have it connected to a BOSE speaker which works (I tested it with a

  • Displaying Changes to IBAN

    Hi All,           We have a requirement of displaying changes to IBAN(International banking number ) of a vendor. We need to display the old value as well the new one.We are following :    1.Getting details from CDHDR for Change doc object = ‘KRED’ 

  • All plug-ins and Adobe add-ons gone after this last update! I want them back!

    I have 4 critical Topaz plug-ins and several Adobe add-ons that make my workflow so much easier but after this last update they've disappeared. I found the Adobe AO's briefly in 'Extensions' and Features needed an update, I did and then it disappeare

  • BSP Excel Web Coomponent

    Good Morning Everybody; As you know BSP provides a built-in Excel Web Component.to provide Data Entry for the users extending all Excel functionalities. The excel web componennt in BSP is provided by the vendor "Microsoft Web Components" Ver. 11.0.0.

  • Ipad Air 16 GB

    If I were to purchase an Ipad Air 16 GB Wifi+Cellular, totalling around $629, typically how much is added to my monthly cell phone bill using AT&T?