To add the line item in Sales Order

Hi Experts,
I have to insert the line item between two line item in sales order dynamically.
How should i do this.
any idea??
Thanks in Advance.

Hi,
I guess you are talking about BOM, sub-items or free goods, wherein after you put in one item the other material defined gets added automatically in the sales order.
That is done with the help of Item Category config by functional person.
Check here for more info
[Item Category|Re: Item Category;
You can also use user exit MV45AFZZ form user_exit_move_to_vbap for a specific logic defined at runtime.
Regards,
Amit
Edited by: Amit Iyer on Aug 26, 2009 10:21 PM

Similar Messages

How to add 100 line item in sales order at one time

Hello Guru's
My requirement is to add 100 line items in sales order at once.
what can be good approach to overcome this situation.Is there some kind of tool which can be useful?
Let me know your suggestions
Thanks a lot in Advance

Hi,
do configuration for Proposal Items tab - like -
then create sales order using with Propose items button - VA01 - then system will accept more than 50 line of materials at a time
Please Use BAPI -- creation of Sales order
Thanking you
Regards
Mahesh

How to make the line items of sales order cannot be deleted.

Hi All,
Is there any Enhancement spots or user-exits which make the line items of sales order cannot be deleted if item category is 'TAN'.
Thanks in Advance,
Sudhakar Reddy .A

Hi All,
If you doesn't want to delete sales order line items then we have write in the Include Program which has mentioned below and in the form .....endform.
Program Name : Include MV45AFZB
_Example:_
form userexit_check_xvbap_for_delet using us_error
us_exit.
IF .......
US_EXIT = CHARX.
ENDIF.
endform.

How to get Characteristic Values assigned to the line item of Sales Order?

Hi,
I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
this fn. mod. giving all the Characters but not the assigned characteristic values.
Is there any other way to find characteristic values of sales order.
Thanks,
vinayak.
Message was edited by: vinayaga sundaram

For example, please see this example program.
It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
report zrich_0001.
* Internal Table for Characteristic Data
data: begin of i_char occurs 0.
        include structure comw.
data: end of i_char.
data: xcabn type cabn.
data: begin of xcawn,
      atwtb type cawnt-atwtb,
      end of xcawn.
data: xvbap type vbap.
parameters: p_vbeln type vbap-vbeln,
            p_posnr type vbap-posnr.
start-of-selection.
select single * from vbap into xvbap
             where vbeln = p_vbeln
               and posnr = p_posnr.
clear i_char. refresh i_char.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
       exporting
            instance           = xvbap-cuobj
       tables
            attributes         = i_char
       exceptions
            instance_not_found = 1.
loop at i_char.
    clear xcabn.
    select single * from cabn into xcabn
             where atinn = i_char-atinn.
    clear xcawn.
    select single cawnt~atwtb into xcawn
               from cawn
                 inner join cawnt
                   on cawn~atinn = cawnt~atinn
                  and cawn~atzhl = cawnt~atzhl
                      where cawn~atinn = i_char-atinn
                        and cawn~atwrt = i_char-atwrt.
    write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
endloop.
Regards,
RIch Heilman

Delete the line item in sales order in VA01/VA02 when the quantity is modif

Hi SAP,
I have requirement to delete a line item in sales order.Please suggest me to do the same.
THe scenarios is , we are inserting a free good line item based on some condition and quantity, If the quantity is modified the free good line item inserted needs to be deleted.
Waiting for your responce
Thanks,
Billa
Moderator message : Spec dumping is not allowed,search for available information. Thread locked.
Edited by: Vinod Kumar on Nov 14, 2011 1:54 PM

Hi,
Can you also check the SALES LINE.
Sales line is the combination of SALES ORGANISATION + DISTRIBTION CHANNEL +PLANT.
Hope it was not maintained.
Transaction code : OVX6
PATH: IMG->ENTERPRISE STRCTRE->ASSIGNMENT>SALES AND DISTRIBTION->ASSIGN SALES ORG- DISTRIBTION-PLANT.
please revert if the error still exists.
santosh

Not able to add extra line item in sales order - va01

Hi friends,
At the time of creation of sales order via va01.
I am appending the my extra line item in xvbap. But on screen I am not able to view that extra line item.
Could you please help me out with this problem.
My code is given below.
I am writting this code in MV45AFZB &
in that FORM USEREXIT_CHECK_VBAP USING US_DIALOG.
it_free_goods is the table in which i am having data which needs to be uploaded in xvbap.
IF it_free_goods[] IS NOT INITIAL.
    LOOP AT it_free_goods INTO wa_free_goods.
      wa_xvbap-matnr = wa_free_goods-matnr.
      RV45A-MABNR = wa_free_goods-matnr.
      VBAP-POSNR   = vbap-posnr + 10.
      wa_xvbap-kwmeng = wa_free_goods-menge.
      wa_xvbap-meins = wa_free_goods-meins.
      wa_xvbap-pstyv = co_pstyv.
      wa_xvbap-posnr = vbap-posnr + 10.
      wa_XVBAP-UPDKZ = 'I'.
      MOVE-CORRESPONDING wa_xvbap TO xvbap.
      APPEND xvbap.
     ENDLOOP.
   ENDIF.
Please let me know if somethings needs to be changed.
It will be very helpful for me,
Thanks,
Best Regards,
Prashant

Hi Prashanth,
I believe the use of
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level
Please check the following link which has a similar requirement
Re: VA01/VA02 screen exit
Regards
Byju

Line item in sales order

Hi sdn team,
can i delete line items in sales order...i mean i was asked not to do so..... when i do so what kind of consequences will i have to look forward to?
regards.

Hi,
Yes you can delete the Line Items in Sales Order.
Consequences with Example:
The BOM Item ( Main Item ) is having the 3 line items (Components / Sub items)
which are explode in the sales Order for which, if you delete the one of the
Component items in sales order then only 2 componets will delivery and 2 will be
billed instead of 3 components items. well this will be a problem for the customer
and leads to Customer Complaints.
Hope this Clarifies Your Doubt and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Automatically add line-items to Sales order

Hello,
Our client needs us to add line items to sales orders. The requirement is such that, when the users enter a material on a line item, they wish to see few more materials automatically added as new line items -- item category to be maintained as "Free" items. This appears similar to automatically getting BOM-sub-items for materials which have BOMs maintained. The client is not willing to maintain BOMs for materials in question. They instead have asked us to maintain sub-item materials in a Z-table and then fetch those to populate the subsequent line-items on the sales order.
So far, we have tried to fiddle around with the XVBAK and XVBAP internal tables in sales exit (MV45AFZZ) and also tried to use BAPI within the same exit. Both methods do not work.
Could you please guide us ? Thank you.
Regards,

Hi,
I think you can try with product proposal(Item Proposal). T.Code:VA51.
Using this one can create list of items to be proposed at the time sales order processing.
Item proposal contains list of items with or without default quantities those were frequently ordered by the customer. You can create any no of items in an Item proposal.Like wise you can create any no.of item proposals.
But,You can assign only one item proposal per customer in sales tab of the CMR.So that when ever you are creating order for that customer you can access those materials which are listed in an Item proposal completely or selectively,with or without default quantities.
The items which are proposed from an Item proposal are always changeable.
Item proposal makes sales order processing simple and fast.
Only the thing here is it will not automatically explode like in case of BOM.You have to manually select those items from an item proposal.
Regards,
Revan
Edited by: REVAN on Dec 23, 2008 10:55 AM

Automatically add line-items to sales orders

Hello,
Our client needs us to add line items to sales orders. The requirement is such that, when the users enter a material on a line item, they wish to see few more materials automatically added as new line items -- item category to be maintained as "Free" items. This appears similar to automatically getting BOM-sub-items for materials which have BOMs maintained. The client is not willing to maintain BOMs for materials in question. They instead have asked us to maintain sub-item materials in a Z-table and then fetch those to populate the subsequent line-items on the sales order.
So far, we have tried to fiddle around with the XVBAK and XVBAP internal tables in sales exit (MV45AFZZ) and also tried to use BAPI within the same exit. Both methods do not work.
Could you please guide us ? Thank you.
Regards,

Ist method:
Maintain one Ztable with the fields of Material and sub materials.
write BDC to create order,before entering the material number check if material is existed in Ztable or not.
If it exist take that material and added as a another line item.
if not exist create like normal line item.
2 nd method:
Ask your MM functional consultant to maintain supression of materials concept.

How to add line item to sales order item table?

Kindly help me the with the below requirement .
Add line item to sales order(va01) dynamically on click of button. The button is also custom created push button.
In the above requirement I have added the pushbutton to va01 tcode. But when I click on that button I need to add line item to sales order item table.
I tried a lot but I am not successful. If possible can u please help on this.
Regards,
Rachel

Hi!
It's quite easy even in the standard SAP to add a line item for a customer order, I don't think it worth to develop a new button for this.
However if you wanted to add a line automatically, the you can do the following in the program MV45AFZZ, FORM USEREXIT_SAVE_DOCUMENT.
You can use similar code, but with some modifications.
DATA: lv_posnr.
LOOP AT xvbap.
MOVE xvbap-posnr TO lv_posnr.   "get the last posnr
ENDLOOP.
ADD 10 TO lv_posnr.
MOVE 'XYZ' TO xvbap-matnr.   "enter your material number here
MOVE lv_posnr TO xvbap-posnr.
* fill additinal field data in XVBAP if necessary
MOVE 'I' TO xvbap-updkz.                  "Insert line
APPEND xvbap.
Regards
Tamá

To add line items to sales order using User exit.

Hi ,
I have to add line items to sales order .
I have tried adding the code in usr exit move field _VBAP // Check VBAP and in savedocument _prepare . But in all the places I dont see it in VA01 . I can see it in the VA02 and VA03 . But I am not able to save the order as they have made the flooring term as mandatory field, and I am supposed to populate the XVBKD structure for this.
Pls tell me whts the procedure like say , should I popluate the XVBKD / XVBAP / and should i use the bapi_SALES_ITEM_CHECK to populate the structures at the save_document prepare.

Hi,
1. It is not possible to delete records using DTW, only importing new records or updating existing ones are supported. These are the only valid operations via DTW.
2. It is possible to delete the contents of an edit text field by using the character / or -1. However it is not possible to clear an entire row/line using this notation.
Thanks & Regards,
Nagarajan

Add Line Item In Sales Order VA01

HI All,
I have new requirement in creation of sales order . Here we have free promotion sales . Here if customer buy one material then he will get some other material as free .In standard sap we can give only one line item as free not more than that .
Here our requirement is more than one line item . I suggested them maintain all the free materials in one Ztable when ever the original material will come for sales order then i have to fetch these materials from ztable automatically and it should create sales order. I started doing this using user exit FORM USEREXIT_MOVE_FIELD_TO_VBAP.
These are the below links i checked in our sdn.
Adding Line items to sales order on creation using User-Exit in VA01.
Please give me some idea on this .
Regards,
Madhu.

Hi Asik,
Thanks for your reply.In my case i can not got for Bom because the schemes will change for every ten days. I think Bom creation will fill a lot of data but it wont solve my issue.
Regards,
Madhu.

MRP RUN for the more than one line item in sales order.

Hi ,
In the sales order nuber of line item are , i will have to take MRP RUN for selected line item .
So plz suggest what development will require?
Abhay
Edited by: abhay patil on May 30, 2008 8:52 AM

HI,
U can write separate prog. Which will ask sales order no. and from to line item or multiple line item of sale order. Then in loop internally pass the each line item no to MD50 prog. Which will run in background.
I will give u sample prog. Which I had created for running MRP for all the lines items of given sales order in one go.
*& Report ZPRG_PP_001
REPORT ZPRG_PP_001.
tables vbak.
data: begin of it_vbap occurs 1,
        vbeln type    vbap-vbeln,
        posnr type    vbap-posnr,
      end   of it_vbap.
DATA: P_MODE   TYPE    C.
      Batchinputdata of single transaction
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
parameters :   p_vbeln like vbak-vbeln obligatory.
selection-screen skip.
parameters :   p_fore   radiobutton group mode,
                 p_back   radiobutton group mode default 'X'.
selection-screen end   of block b1.
at selection-screen.
Check Sales Order
if not p_vbeln is initial.
    select single * from vbak
      where vbeln eq p_vbeln.
    if sy-subrc <> 0.
      message e499(sy) with 'Invalid Sales Order no.' p_vbeln.
    endif.
endif.
start-of-selecTION.
Get Sales order items
select vbeln posnr from vbap
    into table it_vbap
    where vbeln eq p_vbeln.
Set BDC mode
if p_back eq 'X'.
    p_mode = 'E'.
else.
    p_mode = 'A'.
endif.
Process MD50 BDC
LOOP AT IT_VBAP.
    perform bdc_dynpro      using 'SAPMM61X' '0160'.
    perform bdc_field       using 'BDC_CURSOR' 'RM61X-TRMPL'.
    perform bdc_field       using 'BDC_OKCODE' '/00'.
    perform bdc_field       using 'RM61X-KDAUF' IT_VBAP-VBELN.
    perform bdc_field       using 'RM61X-KDPOS' IT_VBAP-POSNR.
    perform bdc_field       using 'RM61X-BANER' '1'.
    perform bdc_field       using 'RM61X-LIFKZ' '3'.
    perform bdc_field       using 'RM61X-PLMOD' '3'.
    perform bdc_field       using 'RM61X-TRMPL' '1'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE'   '=XBAC'.
    CALL TRANSACTION 'MD50' USING BDCDATA MODE P_MODE.
    CLEAR BDCDATA.
    REFRESH BDCDATA.
ENDLOOP.
end-of-selection.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM.
Ajay P. Nikte

How to add the line items while running the VA01

HI All,
I want to add the line items while I am running the VA01 t-code(In run time).Could anybody give the FM to create the line items....Its urgent

Hi ,
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
regards
P.

What user exit can add / delete lines on a sales order?

Hi experts -
We are going to be using a 3rd party to give us pricing, so we need to make a call for each line item to get prices. This may give us free goods, so we will need to add / remove lines from a sales order.
Any ideas what exit will allow us to do this?
Thanks,
Mark

Hi,
Try BAPI:
BAPI_SALESORDER_CHANGE
Regards,
Gilberto Li

To add the line item in Sales Order

Similar Messages

Maybe you are looking for