To check the stock of the header and components in same screen?

Hi ,
Is there is any option available in SAP to check the header and its components exising stock in same screen like in multilevel bom we can see BOM and components same way we need one more column which shows the avialble stock.
Thanks
KK

Dear Madhu,
My question is we need to check the stock for one material and it's components to manufacture it in one screen for this is there any option available in standard SAP,where as you have suggested MB52 which gives me the plant stock for all materials.
Thanks
KK
Edited by: kiran kumar on Mar 28, 2010 8:31 AM

Similar Messages

How can we revise the pricing both at header and item level of sales order?

Dear All,
Now there's one issue of the pricing to me. i want to revise the pricing both at header and item level of sales order. but after i finished the cutomize and tested it, it's more different as i thought. i found that the pricing can revise at the one side only,for example, if i revise the pricing at item level and it's grey and can't be revised at the header. on the other hand, it's the same result what's happened at item.
So, in my opinion, we can't revise the pricing both at header and item, right? if not, please give me more advices and teach me how to solve the problem. thanks a lot.

Dear Lakshmipathi,
Thanks a lot for your kindly and useful answer for me and I learn more for the pricing technology.
I didn't notice the way that you reminded ago therefore I also saw the button at the condition tab. And your suggestion makes me know more.
And I had tested the way that you said, I met with a question. Below is my opinion for my testing.
I had created one SO and the pricing was $10, then I revised the pricing from 10 to 15 by VK11. It can't be updated automatically at SO and I must update it manually by clicking the "Update" button. This is OK for my testing, but I have another question to disturb you for the use of "Active" button. When I click the button and nothing is responsed, it's quite different what you said. So, please give more detail for the Active button. Thanks a lot.

Is the (stock) content the same across the online/self-paced, online/instructor-led, and classroom/instructor-led courses?

Apologies if this isn't the most appropriate forum.
My question is primarily about the LabVIEW Core 1 - Core 3 and TestStand 1 classes.
Is the stock content the same in the 3 aforementioned formats? By stock I mean "excluding any additional material presented in response to a question asked by a student".
Thanks.
Solved!
Go to Solution.

The content should be identical.
The only exceptions I have seen is with certain demonstrations or exercises which can't be done without physical access to the system.
For example in the online Real-Time class you can't personally connect the hardware to the temperature chamber, so instead you can see the hardware already set up and interact with it.
Instructors often also add some of their personal experience to the classes and may explain differerent sections differently.
Craig H. | CLA | Systems Engineer | National Instruments

How to resrve the stock to the customer against the sales order

hi,
sap gurus,
good morning to all,
how to reserve the stock to the customer against the sales order if this process is not MAKE TO
ORDER SCENARIO.
the prices of the products will be often changing drastically so
he is following MAKE TO STOCK Process in his production process.
so with out using m.t.o. process how to reserve it against the customer.
for eg:
in the market when the customer/dealer/stockist coems to know that prices are going to increase
then obviously he tends to purchase in bulk quantities and reserve it in godown.
so how to map that process.
help me on this.
regards,
balaji.t
09990019711

Dear Balaji,
This can be done By MM consultant through movement type. to move the stock from unresticted stock to customer stock.
Regards,
Sudhir

At the time of go-live, how to adjust the stock in the bins which match- -

Hello,
Materials are already distributed in to the bins physically where SAP WH mgt not implemented. When we implement the SAP/(at the time of go-live),we have following issues
When we go live, then how to adjust the stock in the system as per actual physical bin stocks in WMS?
OR
DO we have to tell user to adjust the stock in the bins physically as per the system stock?
Thanks

hi,
your stock level get differed between storage level and warehouse level? if so go to LX23 AND EQUAL THE DIFFERENCE.
if u want to change the bin level adjustment use lt01 and lt10 tran. as per your req(at the time of go live) adjust according your inventory stock.
regards
muthuraman.d
Edited by: muthuraman d on Dec 16, 2009 8:59 AM

How to block Gr if the stock reaches the maximum limits

Dear All,
Is there any way so that the system will automatically Block the GR while doing MIGO when the stock of the given material has crossed the maximum limit.
Regards
Om Prakash Gupta

Hi,
If you want to restrcit any specific material stock quantity, it means some where you need to maintain the Stock limit for that purpose you will have create a Z table whene in you will maintain sthe maximumstock limit and then with the help of user exit in PO or MIGO you can validate it with the Z Table stock . Z table for stock quantity can consider stock incremental aginst each PO and GR .
Take ABAPer's help
Regards,
Vikas

Move the stock from the raw material storage type to production storage typ

Hi
How to move the stock from the raw material storage type to production storage type.
note that both stoare type be in same storage location only.
pls reply me

Hi Raj,
I WM process, issue or transfer to Production process results in picking of material from the RM storge location / storage type.
If you mean your production stoarge location is same as that of the RM stoage location, it is just a tranfer within a warehous.
which you could do with posting change document. This doesnt reduce your WM stock.
If the production stoarge location is differnt from RM stiage location, then it is picking process from WM and goods issue.
this reduces your WM stock.
hope it helps.
Regards
Harish

HT201210 i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server c

i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server contact problem. what can i do to start my phone???? plz help me

I will need a little bit of information about your phone. What kind of error are you getting?

Does the SI_ID for 'User Folders' and 'Users' remains same in CMC?

Does the SI_ID for 'User Folders' and 'Users' remains same across the environments. For my CMS it is coming as 18 and 19 respectively.
String siName = "User Folders"; // Users
IInfoObjects rpts = iStore.query("SELECT SI_ID FROM CI_INFOOBJECTS, CI_SYSTEMOBJECTS WHERE SI_NAME='"+ siName +"'");
IInfoObject iObj = (IInfoObject)rpts.get(0);
System.out.println("iObj.getTitle() = " + iObj.getTitle());
System.out.println("iObj.getID() = " + iObj.getID());
Any reference text/link for better understanding on this will help a lot.
Thanks & Regards

Typically I believe anything that is created by BOE when you install the product stays consistent across multiple environments that were deployed the same.
You probably should ask in the other [BOE forum|Business Intelligence Solution Architecture; just to confirm.
Jason

BOM Header and Components Relationship table

Hi There,
Can you please let me know the table which specifies the relationship between BOM Header and Its components in Product Master?
Any Help is appreciated.
Regards,
Chanakya Reddy

Thanks everyone,
Solved it myself.
Regards,
Chanakya Reddy

How To set Header and Footer in MIDlet screen

Hi Friends,
How can i set header and footer in my screens .
My need is that in header part ,my company's name shuld be display and in footer section "any thing".
How can i achieve this things plz advice me.
karan

Hi Supareno,
Can u tell me in details with small code, If it's
possible for you .
regards
karandefine an header (coordinate 0,0)
optional {
a CustomItem? (coordinate 0, 0+header.getHeight() )
another CustomItem ? (coordinate 0, CustomItem.getY() + CustomItem.getHeight() )
etc...
define footer (coordinate 0, getHeight() - footer.getHeight() )
Message was edited by:
supareno

How to print Header and footer in same page

Hi All,
I am using Oracle Report 10g. How can I add header and footer on same page as my body? Right now when a generate a pdf file, it is printing individual pages instead of 1 one page. Please help me.
Regards

HI
First of all,
Unless otherwise you selected some option like page break after/before - both body and header/footer will print on same page in report, so in pdf as well.
If you have difference on report and PDF that you should look into your setup.
If you want more help, please be particular on your issue
james. wrote:
Hi All,
I am using Oracle Report 10g. How can I add header and footer on same page as my body? Right now when a generate a pdf file, it is printing individual pages instead of 1 one page. Please help me.
Regards

How do I change images in a Business Catalyst template? I have uploaded these images and can't seem to find where the stock images are located and how to change them out.

I want to customize this template by swapping the stock images that are already in place. I have been able to upload my new images to the file that the others are stored, but I cannot find a way to implement the changes. HELP

Er, not according to the header at the top of this thread:
No mention of Windows there. And I saw no connection link for iCloud on my Mac. If there is such a thing, I missed it. In which case please accept my apologies.

Merge the total line about header and item in the Hierarchical Seq ALV

Hello guys,
Now i used CL_SALV_HIERSEQ_TABLE to create a Hierarchical Sequential ALV. but there are two total lines, one is to calculate the numerical fields in the header(main) and another is calculate the numerical fields in the item(slave).
my requirement doesn't contain the calculation for header line, so the first line is unuseful and i want to merge these two line.
how i should do with it?
Any clues is appreciated.
Thanks a lot

could anyone help me? i am very urgent!

Modifying the stock arch linux kernel and kernel timer frequency

so if i understand correctly, if we want to modify the stock arch linux kernel, we have to pull it off of abs. ie "ABSROOT=. abs core/linux" then modify the pkgbuild, uncommenting out make menuconfig and setting the pkgbase name to something different than stock. ie, "linux-custom" then update the checksums followed by importing the gpg keys, ie "gpg --recv-keys 79BE3E4300411886 and gpg --recv-keys 38DBBDC86092693E" for the kernel and patches. then run makepkg -s.
we can't just run make menuconfig on the current kernel that's installed?
and if we pull the linux kernel from abs to customize, does it already come preconfigured with all the arch changes and settings? like its no different than the current one installed?
i just ask because for the most part, i like the current arch kernel, there are just a few minor things i want to change but kept everything else the same as stock arch linux kernel.
also, i herd arch uses 300hz for its timer. whats the benefits and disadvantage of using 300hz over 1000hz for a desktop system?

orlfman wrote:we can't just run make menuconfig on the current kernel that's installed?
No you can't, because the kernel then has to be compiled so the kernel will run with the different tick rate.
orlfman wrote:
and if we pull the linux kernel from abs to customize, does it already come preconfigured with all the arch changes and settings? like its no different than the current one installed?
i just ask because for the most part, i like the current arch kernel, there are just a few minor things i want to change but kept everything else the same as stock arch linux kernel.
As I understand it from the Wiki, the ABS pulls the PKGBUILD and other arch-specific sources from the ArchLinux script server. However, I don't use the ABS, but pull the files I need directly from the ArchLinux SVN and build using makepkg[1] after making the necessary changes.
orlfman wrote:Also, I heard arch uses 300hz for its timer. whats the benefits and disadvantage of using 300hz over 1000hz for a desktop system?
You're in for a technical discussion here. This has a reasonably friendly discussion on kernel tick rates.
Basically, higher tick rates = a higher level of timing precision & higher processor load, lower tick rates = lower level of timing precision & lower processor load.
[1] Technically, I use the clean chroot manager package, which is a wrapper for makechrootpkg (which in turn is a wrapper for running makepkg in a clean chroot if I'm not mistaken).

To check the stock of the header and components in same screen?

Similar Messages

Maybe you are looking for