To convert Old material Number (BISMT) to new material number

HI Folks,
I have the requirement is how to convert OLD material number to New material number. Is thier any Global exists is thier? Please let me know.
Thanks,
Vijay

Hi,
use MGA00001 in changing parameters u can change...
Regards

Similar Messages

According to material num,for every new material num one line space.

Hi,
please give suggestion how to get vertical lines without breaking as shown below.
I want according to material number(AT1),for every new material number one line space have to be there.
I used 'skip' so the verical line is breaking for every new material.
Material Number |   Material Description
_____________ |______________________________________________
|    AT1                  |   Catalyst - 18165-RNA-A013-Y2
|    AT2                  |   Catalyst - 18165-RNA-A013-Y2
|    AT3                  |   Catalyst - 18165-RNA-A013-Y2 (COPY)
|    AT4                  |   Catalyst - 18165-RNA-A013-Y2
|    AT5                  |   Catalyst - 18165-RNA-A013-Y2
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
| CGW0001              SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
| CGW0001              SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
|   CGW0001             SUBSTRATE 148 X 84 X 67 - 400/6/S/0.699L
I need line continous but for every new material to material gap.
Thanks,
sree.

Hi,
write code like this.
write : /1 sy-vline,120 sy-vline.
give the line size for ex 120
reward if usefull

Issue with CS5 deactivation on old computer and reactivation on new - serial number not working

Please help - we are owners of Creative Suite Design Premium CS5 - I just recently switched my wife to a new computer using migration ( we have macs), when I try to deactivate the old license on the old computer it gives me an error, thus preventing me from activation on the new computer. At least, I think this is what the problem is, because I've tried every serial number I've ever received from adobe and none of them work.
I know you want everyone to go to CC, but we've paid Adobe thousands of dollars over the years and I expect this software to work. Please help - this is the only way I can contact you with my problem. Any assistance would be greatly appreciated.

This was the only available option to me, according to adobes site. Their lack of support for older software is mind boggling. So the only way for me to get to talk to someone is by fibbing on their extensive question list before the process actually begins. I guess I will try that if I don't hear from an Adobe team member here...

Need help in converting old LabVIEW instrument drivers to new version.

Hello,
I just rented a Tektronix DG2020A data generator. I did not find any instrument drivers for the DG2020A on the Instrument Driver Network, although there are drivers for DG2040 that could be used to some extent. With the instrument, I also received a floppy with example programs. This does include LabVIEW drivers for the DG2020A. However, when I tried to load the VIs, I received an error message that the VI version 3.1 is too old to be converted to 7.1. Can someone at NI help with the conversion? It would be very useful.
Thanks.

There is a driver available for the DG2020 on NI's site. Models supported are the DG2020, DG2030, and DG2040. Available in both 7.x and 8.x.

LVLM on EV3, converting old *.vi on NXT to new *.vi on EV3

Hi all
Thanks to NI, A.Pena and his team for the new EV3-Module!
The installation of the module was successful. The first tests where rather surprising but worked.
Problem: I wanted to compile some of my old *.vi on NXT to the EV3-Brick, what failed with error-messages about every programmed function.
I was only successful by rewriting the whole program. Is there a conversion-tool to translate *.vi on NXT to *.vi on EV3?
Thanks Andi Pi

I would think that VIs would automatically re-compile, so I don't think that would be causing any error messages. The Mass Compile tool is only available in the regular LabVIEW environment. If you are using the LabVIEW for LEGO MINDSTORMS Environment, switch to the LabVIEW environment from Tools>>Choose Environment...
As far as I know Base Package refers to a LabVIEW installation which offers more limited features than the Full or Professional version. According to the NI online documentation, the base package is sufficient to use Mass Compile.

Converting Old Windows Laptop Backup to New MB Pro

I am running Parallels. Should I just put my whole old PC backup in Parallels and just start fresh on the Mac side?
I appreciate any help!
Thanks.

SolanaSigma wrote:
Is there going to be a compatibility issue with the documents I've created on the PC? In other words, will I need to purchase Office for Mac or will iWork suffice?
How complex are your documents? For most of my documents, I can use OpenOffice (free), iWork, or even MS Office for windows in a virtual environment to work with them. I have a couple documents that use some more complex features of Office, and they don't work very well with anything other than MS Office. They even have problems with different versions of MS office other than teh one they were create with.
SolanaSigma wrote:
Also, can you or anyone recommend an excellent backup and protection program for Mac?
I use SuperDuper for making backup images of my MacOS system volume. This allows me to make a bootable clone drive so I can boot from an external backup in an emergency. It wasn't too expensive, about $20-30 when I bought it, but they even allow you to run a trial before you buy.

How insert a new material in between through me22n

hi,
I am not sure whether this is right forum or not to ask this question. But in quest of searching a solution to my problem I am putting my question:
how to insert in between two material line-items a new material to keep sequence of ordering stock same with the purchase orders from client to keep cross-check easy and fast in transaction ME22N.
thanx
adnan

Hi,
Objective is to keep material stock in sequence in which are ordered.
If you have line item
10.......
20......
& now you can enter line item 30. Now receive goods and keep in ordering sequence.
OR
If you have line item
10.......
20......
You can enter a new item as 15(if permitted) which is in between 10 and 20.
stock same
Regards,
Biju K

Can we change material type after creation of material

hi all ,
can any body tell me how we can change the material type of already created material , i have a material type (do not use raw material) which i want to chage in raw material
please reply

Hi Manjit
Try transaction MMAM
It may not work if you have some differences in field selection between the old material type and the new material type (e.g. batch mandatory in old material type and hidden in new material type)
It may not allow processing if stock has already been posted
Regards
Steve

Old material overwritten by new material code in Product cost collector

Hi SAP Gurus,
How can I work around if a product cost collector with material XXX has been overwritten by a new material YYY when creating the KKF6N.
Both material code having the same plant, same orde type,same production version but just different material code.
When saving the preliminary costing for the product cost collector for material YYY, the system prompted me the order number 700022 which is already existing and created for material XXX.
By right, this shd not be happened but indeed it did.
Now when displaying the report S_ALR_87013127 - Order Selection, the report showed the new material YYY was created with order number 700022 but the content of the data was for old material XXX.
Now my problem is how can I get back the product cost collector for material XXX as the original order number 700022 was meant for material XXX and not mat YYY.
And also when executing backflush (MFBF) for old material XXX, the error msg prompted as 'content of order 700022: Mat YYY transferred to interface (IMSEG):Mat XXX due to this I can't backflush material XXX.
Really appreciate your expertise on this urgently.
many thanks!

problem due to system bug, have to log to OSS for help.

When I sync my ipod to add new material, sometimes itunes will automatically rearrange the song order of my pre-existing albums by number of plays. Why does it do this? And is there a way to stop it?

When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing material by songs with the greatest number of plays to least (though sometimes it seems to be completely random). When I check itunes on my computer, everything still appears to be in order but the way it appears on the device often is in the previously mentioned disorder. Why does it do this? Is there any setting that I can adjust to make it stop because the only way I've found so far is to delete the rearranged material and re-import the cd and then re-sync. It might sound picky, but I prefer that my music be in order by track number as the artists themselves intended for various reasons the foremost being that I often listen to whole albums from start to finish and this glitch makes such problematic. I have found some settings in preferences that focus on how material is arranged but this seemed to be focused on the actual folders where the music is located on my hard drive and not the way it appears on the ipod. If anyone knows the reason it does this or has suggestions on fixing it, I would be greatly appreciative. Thanks.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

How to keep your old number with a new iPhone

I find this confusing.
I have an iPhone 4 with an AT&T contract.
I am eligible for an upgrade and have ordered an iPhone 5 from Apple.
What steps do I have to take to keep my old telephone number on the new iPhone 5?
I believe this answer from AT&T is nonsense:
Upon reviewing your account I have found the following information. In
order for you to utilize the iPhone 5 on your current phone number, you
must return the iPhone 4 you recently purchased. You will be charged the
restocking fee for the return. You must return it with the original
packaging to the location from which the device was purchased. I show
that you purchased the device at an Apple store.
They can also assist you with preordering an iPhone 5. Once they have
processed your return of the iPhone 4, it should allow them to pre-order
your iPhone 5.
Can anyone _please_ tell me how I go about keeping my old number when the new iPhone arrives?
Many thanks.

you should never have to return the product once you bought and are under contract. At no point can they make you return it.
As far as the iPhone 5 is concerned, just like Brad said, activate it through itunes and if a problem arises just call att.

HT1766 How can I transfer my old iphone number to my new iphone?

I bought the new iphone from verizon and i had another iphone with another carrier and i was just wondering what it is i had to do switch my old cell phone number to my new one without having to go to my new carrier.

Your carrier can do it for you. Why would you not want to go to them?

I returned my old ipod and ordered a new one a few days ago and i was never given a tracking number for the new one that is being shipped

i returned my old ipod and ordered a new one a few days ago and i was never given a tracking number for the new one that is being shipped

Go to the Apple Store webpage and in the upper right go to Account and select Track an Order. There you will find the status of your order. You only get a tracking order when the items ships.

My old phone number is stuck on my ipod touch and I am trying to put my new phone number in but it will give me no place to do it. I have looked up all support reset things made sure my new number was attached to my apple id and still

I have an IPOD Touch and it had my old phone number in it, I have tried absolutely everything listed on the community support that I could find, restoring factoro settings restarting phone logging out of facetime and imessage but it wont allow my to put in a new phone number even though on my apple id there is a phone number it will not correspond with the new number it doesn't give me even an option for a phone number now just email. Can someone please help me THANKS

Where is the phone number on the iPod?
If you have an iPhone with iOS and use the same ID for Messages and FaceTime as on the iPod the iPhone's phone number will be listed for Messages and FaceTime on the iPod.
If you changed phone numbers on the iPhone, sign out of Messages and FaceTime and then sing back in. Then do the same a little while later on the iPod.
For some info see:
iOS: About Messages

When a contact gets a new phone number, I delete the old and enter the new. Then when I text or call the old number shows up as a selection yet it's no longer under the contacts info.

When a contact gets a new phone number, I delete the old number and enter the new number. When I try to text or call, both the old a new numbers. One up as a selection choice, even though the old number is gone from the contact.

That's normal behavior as the old one will remain in the memory cache for a while until it's eventually overwritten. If it's particularly bothersome to you, you can restore your phone as NEW and this will empty the cache.

To convert Old material Number (BISMT) to new material number

Similar Messages

Maybe you are looking for