To find out the table which gives me the vendor no. to whom i pay brokerage

Hello Everyone!
      My question is,
           In PO i have two different vendors... one vendor is the one from which we purchase goods and second vendor is the one to whom we pay brokerage. We mention the brokerage amount in 'ZBR0' condition type. Now I want to find out the table which gives me the vendor no. to whom i pay brokerage.
           Please its so urgent.
      Thanks & Regards,
                Pranil Shinde.

Hi,
look in table KONV and you will find your condition and the vendor.
Regards Vassko!

Similar Messages

  • Name of the table which stores all the cubes

    hi all,
    can any one of you give me the name of the table which stores all the names of the cubes which are been using in the system.
    and please give me the way of finding it also.

    hi Antony,
    the table is RSDCUBE, and RSDCUBET is the text table
    also check related tables RSDCUBE*,
    you can open 2 sessions, one run ST05 and activate sql trace,
    another session right click infocube and 'change' or display,
    then go back to ST05 session, and deactivate trace, and display trace
    a list of tables will come out.
    hope this helps.

  • How to see the tables which are in the physical layer of SampleAppLite rpd

    Hi Everyone,
    I am new to OBIEE and I installed OBI Apps with Oracle 11g in my laptop. I tried to create reports using the OracleBIAnalyticsApps rpd. How can I know from which schema the tables are coming in the physical layer of the repository so that I can create a connection pool to the database. I got the default SampleAppLite rpd when I install the OBIEE but I am unable to see those tables in the database schema which are used in the SampleAppLite physical layer. Can anyone tell me how can I see the tables in the database which I see in the rpd. Actually my question may be wrong as I am new to this field, so please let me know if this is a wrong question. As I unable to express my question correctly. Thanks.

    For the OracleBIAnalyticsApps rpd - the tables are under "Catalog" then "dbo" in database "Oracle Data Warehouse" in the physical layer. The RPD comes out of the box with the required connection pools - you dont need to create any. The connection pools "Oracle Data Warehouse Repository Initblocks Connection Pool" and "Oracle Data Warehouse Connection Pool" in "Oracle Data Warehouse" read the data from the business analytics warehouse that you created in a schema name of your choosing with the DAC. All you need to do is edit the user name and password and the data source name with a connect string - which is the local net service name to your database for default call interface OCI 10g/11g assuming you used an Oracle database for your warehouse. One way to test the connection pool is to right click any table/alias then "Update Row Count".
    BTW Using the Admin Tool open the OracleBIAnalyticsApps rpd then do "Tools" then "Utilities" then "Repository Documentation" then "Execute". This will create a spreadsheet showing you all the mappings from the presentation to business to physical layers.

  • Table which gives Cost Elements allocated to Activity Types

    Hii Experts,
    I need to know the table which gives the Activity types along with the respective GL/Cost Elements attached to them.
    Can anyone help me where to look at the table.
    I see i can get the Activity types with Cost Centers, Cost Centers with Cost Elements but i could not see any table which gives Activity types with Cost Elements.
    Thanks in advance

    Hi,
    table CSLA to see the activity type and the assigned cost element.
    Best regards, Christian

  • Table which gives the billing status for purchase orders

    Is there any table for purchase orders which gives us the "billing status"  as we have table "VBUK" in sales order.

    I don't think there is a status table per se, but try EKBE.
    P.S. It's an SD forum, there is a separate MM/PTP forum.

  • Which table will give me the serial numbers per each delivery?

    Which table will give me the serial numbers per each delivery?

    Hi,
    Table:
    SER01 -> provide links between delivery and serial number object.
    You can select by LIEF_NR = 'delivery number'.
    OBJK -> content of serial numbers
    You can select by OBKNR = 'SER01-OBKNR'.
    Further more:
    You can check in SE11 with name "SER0*". Then you can see a list of tables which contains link between serial number to other document.
    SER01 -> Delivery
    SER02 -> Maint.Contract (SD Order)
    SER03 -> Goods Movements
    SER04 -> Inspection Lot
    SER05 -> PP Order
    SER06 -> Handling Unit-Content
    SER07 -> Physical Inventory
    SER08 -> Purchase Order Item Serial Numbers
    Regards,
    Harry

  • How can i find the tables which dont contain any data under my database ?

    Can you please suggest me a way to find the tables which dont contain any data under my database ?
    Regards,
    Renu

    Can you please suggest me a way to find the tables which dont contain any data under my database ?
    For the schema that you've logged in to, you could do something like this:
    test@XE>
    test@XE> @test
    test@XE> --
    test@XE> set serveroutput on size 1000000
    test@XE>
    test@XE> declare
      2    n_count  number;
      3  begin
      4    for rec in (select object_name from user_objects
      5                where object_type = 'TABLE')
      6    loop
      7      execute immediate 'select count(*) from '||rec.object_name
      8      into n_count;
      9      if (n_count = 0) then
    10        dbms_output.put_line(rec.object_name);
    11      end if;
    12    end loop;
    13  end;
    14  /
    BONUS
    RUN_STATS
    PL/SQL procedure successfully completed.
    test@XE>
    test@XE>For the other schemas, you could query from dba_objects and probably display the owner as well.
    HTH
    isotope

  • Hi, i am new to this iphone 4 and purchased it from craigslist guy with out any password on it but when i came home the itunes app asked me to put davindersihota@icloud password which i neverhave so i contact the seller to give me the password

    I asked the guy to give me the password then he dissclosed that it was not his phone and he purchased from another  brown guy and that he will contact him the second day he told me, he didnot have the phone number off that guy and i ask him to send an email to that email address ,but he replied no one is answering from this email account .so then i tried to restore the phone with itunes and after restoring the phone is asking to put the password for that [email protected] help me because i called apple but they didnot help me,i understand that this features is for security of i phone users in ios7  updates but what about loyal people who sold their item with out knowing these  features  or the person who is purchasing this item dont know that it has been protected by password. Apple must figure out some thing for their loyal customers to give them the phone number  or email regarding that original phone owners ,or see if the phone is not reported as stolen so in this way they should help to activate that phone .I hope Apple will help people and not to be mean with customers.Thanks for reading is message.

    You need the password of the iCloud account/Apple ID that was used to originally set up the phone. That is the activation lock/anti theft feature in iOS 7. There is no way to get around that, except by using the password.
    The original seller should have disabled it, but did not. if the seller is unable or unwilling to give you the information rerquired to unlock your phone, the the phone is probably stolen. That is why you have anti theft features in the phone; to avoid a situation similar to yours.
    Your phone is worthless. Sorry.

  • How to find out all table names which has a particular data

    Hi,
    How could i get all the table names from a database(for a schema) which has data 'KST6490' in one of the fileds in the table.There are many tables with this
    data. Data type is Varchar2. Thanks.

    One approach would be to create a procedure which retrieves the name of all tables in the schema using the user_tables view. Then use the user_tab_columns view to get all the column names and types. If the type is varchar2, then dynamically create a sql statement which runs a query on that column using the value which you are looking for. You would need two cursor loops for this approach: one for tables and one for columns. This approach requires good PL/SQL programming skills.
    Alternately, many query tools, such as Golden, provide a search capability on query results. Just do a select * from the table and search on the results. This would need to be done table by table and the results would have to fit in the memory available to the tool.
    Alternately, you can write table contents to a text file on the a server and then search the text file using operating system tools such as grep. This would require good OS scripting skills.

  • Need help to find the table which stores the infomation listed below

    Hi,
       I am working on Archiving work for archiving the data under the tcode SOST.I searching the table which stores the email document content but I am having difficulty to get the table..Could any one provide some input on this.
    Thanks.
    ~Donny

    I believe it is stored in table SOFFCONT1

  • Please help me to find the table for fields where the descriptions are give

    please help me to find the table for fields where the descriptions are given below
    Customer Support Administrator
    first line Support indicator

    You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
    Then you can use DD03L to find the respective table. This would work if the data element is not generic.
    Regards,
    Anubhav.

  • How to download the data which is in the table?

    how to download the data which is in the table?
    every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
    can any one help me in this.
    Phani.
    Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AM

    One way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
    There u can downlaad the data .
    The ither way is to use the code
    The Following Code will be helpfull to You
    Data :ITAB  TYPE TRUXS_T_TEXT_DATA,
            FILE  TYPE STRING.
             C_ASC     TYPE CHAR10   VALUE 'ASC',
    DATA: L_STATUS TYPE C,
           L_MESSAGE TYPE PMST_RAW_MESSAGE,
           L_SUBJECT TYPE SO_OBJ_DES.
    DATA: L_FILELENGTH TYPE I.
      PERFORM download_to_pc
                  TABLES
                     itab
                  USING
                     filename
                     c_asc
                     c_x
                  CHANGING
                     l_status
                     l_message
                     l_filelength.
    FORM DOWNLOAD_TO_PC TABLES   DOWNLOADTAB
                        USING    FILENAME
                                 FILETYPE TYPE CHAR10
                                 DELIMITED
                        CHANGING STATUS
                                 MESSAGE TYPE PMST_RAW_MESSAGE
                                 FILELENGTH TYPE I.
      DATA: L_FILE TYPE STRING,
            L_SEP.
      L_FILE = FILENAME.
      IF NOT DELIMITED IS INITIAL.
        L_SEP = 'X'.
      ENDIF.
      STATUS = 'S'.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                = L_FILE
          FILETYPE                = FILETYPE
          WRITE_FIELD_SEPARATOR   = L_SEP
        IMPORTING
          FILELENGTH              = FILELENGTH
        TABLES
          DATA_TAB                = DOWNLOADTAB
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          OTHERS                  = 22.
      IF SY-SUBRC <> 0.
        STATUS = 'E'.
        CASE SY-SUBRC.
          WHEN 1.
            MESSAGE = 'gui_download::file write error'.
          WHEN 2.
            MESSAGE = 'gui_download::no batch'.
          WHEN 3.
            MESSAGE = 'gui_download::gui refuse file transfer'.
          WHEN 4.
            MESSAGE = 'gui_download::invalid type'.
          WHEN 5.
            MESSAGE = 'gui_download::no authority'.
          WHEN 6.
            MESSAGE = 'gui_download::unknown error'.
          WHEN 7.
            MESSAGE = 'gui_download::header not allowed'.
          WHEN 8.
            MESSAGE = 'gui_download::separator not allowed'.
          WHEN 9.
            MESSAGE = 'gui_download::filesize not allowed'.
          WHEN 10.
            MESSAGE = 'gui_download::header too long'.
          WHEN 11.
            MESSAGE = 'gui_download::dp error create'.
          WHEN 12.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 13.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 14.
            MESSAGE = 'gui_download::ubknown dp error'.
          WHEN 15.
            MESSAGE = 'gui_download::access denied'.
          WHEN 16.
            MESSAGE = 'gui_download::dp out of memory'.
          WHEN 17.
            MESSAGE = 'gui_download::disk full'.
          WHEN 18.
            MESSAGE = 'gui_download::dp timeout'.
          WHEN 19.
            MESSAGE = 'gui_download::file not found'.
          WHEN 20.
            MESSAGE = 'gui_download::dataprovider exception'.
          WHEN 21.
            MESSAGE = 'gui_download::control flush error'.
          WHEN 22.
            MESSAGE = 'gui_download::Error'.
        ENDCASE.
      ENDIF.
    ENDFORM.             "download_to_pc
    At The End Reward points.
    Please it's Required.
    Thanks ,
    Rahul

  • How to find out in program which all classes have implemented an interface

    Hello,
    I have created an interface and few classes are implementing the interface.
    I want to know in a program which all class have implemented the interface.
    Is it possible to find it out and how?
    Regards,
    Bikash.

    Hi Bikash,
    Read the Database view VSEOIMPLEM with where condition REFCLSNAME = Interface Name and version = 1.
    This would give you all the classes which have implemented the interface and are active...
    If you want to look at the values that the field version can have then see Type Group SEOC ans search for version....
    Hope this help...
    Regards,
    Sitakant

  • Dynamic SQL statement to select the tables which are updated today...

    Hi Guys,
    I need to find the names of all the tables which contain rows that are inserted/updated in a given time stamp...
    Below statement gives me the list of all the tables in the database...
    select t.table_name from all_tables t;All these tables in the database have a column called rowversion which gives the updated/inserted date of a record. I need to write a select statement (probably dynamic) which will give me the table names which contain the rowversion value 24-01-2013....
    Any help is very much appreciated...

    Napster wrote:
    Hi Karthick,
    Thanks for your reply...
    But when I execute your select statement I am getting an error saying table SYS.DBMS_XMLGEN does not exist.
    Probably something wrong in my environment?Yes you can, here is a quick untested code
    declare
      my_filter date := to_date('24-01-2013', 'dd-mm-yyyy');
      my_count integer;
    begin
      for i in (select table_name from user_tables)
      loop
         execute immediate q'[select count(*) from ]' || i.table_name || q'[ where rowversion = :1]'
         using my_filter
         into my_count;
         if my_count > 0 then
             dbms_output.put_line(i.table_name);
         end if;
      end loop;
    end; 
    /

  • Find out user exits which should trigger while saving billing doc.(VA01)

    Hi All,
    please can u help me to find out user exits which should trigger while saving billing documents for VA01 transaction...I have already z report to find the user-exit for any transaction.I have tried in that also.
    Reply
    Ulhas

    Hi
    Try these
    USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)                    
    The internal number range used in the standard system is specified                
    in the billing type table and can be changed in this user exit. This              
    user exit is only called when the billing documents is created.                                                                               
    USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program                       
    RV60AFZZ)                                                                         
    In this user exit additional fields for account determination that                
    are not provided in the standard system are copied into                           
    communication structure KOMKCV (header fields).                                                                               
    USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)                               
    In this user exit additional fields for account determination that                
    are not provided in the standard system are copied into                           
    communication structure KOMPCV (item fields).                                                                               
    USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program                     
    RV60AFZC)                                                                         
    Depending on the number range, table TVFKD is used to set the                     
    billing date (country-specific requirments in Italy).                             
    USEREXIT_NUMBER_RANGE is automatically deactivated when this user                 
    exit is being applied.                                                                               
    USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)                  
    This user exit is only called when the billing document is created.               
    It is used to provide the header and the item of the new billing                  
    document with deviating or additional data.                                       
      USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)                    
      Printing the item line of a billing document can be supplemented or             
      changed.                                                                               
    USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)                     
      Printing the header line of a billing document can be supplemented              
      or changed.                                                                               
    User exits in program RV60AFZD                                                  
      Short descriptions of the user exits are contained in the program:                                                                               
    -   USEREXIT_RELI_XVBPAK_AVBPAK                                                                               
    -   USEREXIT_NEWROLE_XVBPAK_AVBPAK                                                                               
    -   USEREXIT_NEWROLE_XVBPAP_AVBPAK                                                                               
    e following user exits are available in report SAPLV60B for transfer              
    accounting (function group V60B):                                                                               
    EXIT_SAPLV60B_001: Change the header data in the structure acchd                
      You can use this exit to influence the header information of the                
      accounting document. For example, you can change the business                   
      transaction, "created on" date and time, the name of the person who             
      created it or the transaction with which the document was created.                                                                               
    EXIT_SAPLV60B_002: Change the customer line ACCIT                               
      You can use this exit to change the customer line in the accounting             
      document. This exit is processed once the ACCIT structure is filled             
      in with data from document header VBRK.                                                                               
    EXIT_SAPLV60B_003: Change the customer line in costing                          
      The customer line is filled in differently for costing. You can use             
      exit 003 to influence the ACCIT structure.                                                                               
    EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add          
    information to a GL account item (such as quantity specifications)     
    with this exit.                                                                               
    EXIT_SAPLV60B_005: User exit for accruals                              
    Once all relevant data for accruals was entered in the GL account      
    item, you can add to this data with this exit.                                                                               
    EXIT_SAPLV60B_006: Change the control line ACCIT                       
    You can use exit 006 to add information to the control line.                                                                               
    EXIT_SAPLV60B_007: Change the installment plan                         
    You can use exit 007 to add information to the installment plan        
    parameters in the GL account item.                                                                               
    EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and      
    ACCHD                                                                  
    After the accounting document is filled in with data, you can use      
    exit 008 to change the document once again.                                                                               
    EXIT_SAPLV60B_010: Item table for customer lines                       
    You can use exit 10 to influence the contents of customer lines        
    before they are created.                                                                               
    EXIT_SAPLV60B_0011: Change the parameter for cash account              
    determination or reconciliation account determination                  
    You can use this exit to change inbound parameters in order to         
    influence account determination.                                       
    >                                                                      
    Thanks
    Shiva

Maybe you are looking for

  • Make fields only editable by certain useres

    hello, i have created several authorization schemes. In the "Security" section of a text field i can choose these so that the item is only displayed for authorized users. However, I would like everybody to see the text field, but only authorized user

  • HT3702 Issue with updating a valid credit card.

    I am trying to update my payment information, using a valid credit card, and all it tells me is that I need to contact iTunes support with no explanation....what do I do?

  • Skype number inactive

    I recently purchased a Kindle Fire HD 7" and installed Skype on it.  I paid for the subscription and Skype credits.  My bank shows both of those transactions, but when I open Skype it shows the credits, but says my Skype number is not active.  When I

  • HT1483 how do i get photos back after a recent update on my ipod?

    I just came back from a family reunion and took SOO MANY pictures. When I came home I just decided I should update my ipod touch but I didn't realize it would restore. So without saving my pictures prior the update its all gone. I REALLY need to get

  • L_TO_CREATE_MOVE_SU : Block the standard message

    Hi , I am using the FM  'L_TO_CREATE_MOVE_SU' which simulates the functionality of LT09 transaction ( This FM only simulates LT09 transaction , TO is not created ) although I get the message that the Transfer order no  XXXX is created . This message