To find the Person who run Process Chain lastly

Dear All,
How can I find the last person who has run the process chain? is there any table or program?
Best answer receives reward points.
Cheers,

Hello,
Last Modification
You can see that information in RSPC, enter in the chain that you want to see who was the last modification user, and there is a button that shows that information.
All Modifications
Or you can see the log in RSPC and see the modifications done to the a chain.
SUIM
SUIM is a powerful tool that comes in quite handy for the IT when working with roles and authorizations.
It will not deliver the last modification user of a process chain, for sure.
Regards,
Jorge Diogo

Similar Messages

  • HT201441 i cant find the person who sold this iphone to me, and now i cant activate it

    i cant find the person who sold my iphone 5 to me
    now i cant activate it because it is still activated to his apple id

    You have no options but to find the previous owner.  The Activation Lock is an Anti-theft protection that cannot be bypassed, not even Apple.  If you cannot find the previous owner, turn it in to the police as it is likely to be stolen property.

  • Please tell me the way to find the person who has booked the conferenceroom

    HI All,
    When i am trying to book a conference room. it was showing the status a s busy in zimbra.But i am not able to find the person who has booked the room ?? how do i know the person who has booked teh conference room??if i can know that person i can negiotate with him abt the room.
    please tell me the way to find the person who has booked teh conference room ?????
    Thanks in advance
    Venugopal

    Hi Venugopal,
    If you add approvers using beekeeper for that resource AND that you use Outlook, you can see who is 'in charge' of that resource, ie the person that will hand over the keys to that room when you need them. That person is the only one who may be able to tell you who has booked the resource, you can then go and 'negociate' ;o)
    In Zimbra (1.5.1.5) you can't see the contacts..
    hth
    David

  • How can I reactivate my phone if I cannot find the person who originally had the phone

    How can I reactivate my phone if I cannot find the person who originally had the phone

    You can't.  You need to contact the previous owner to get those log in details - this is the new activation lock and without it you will never be able to use that phone.
    You might have to start from scratch again and buy a new phone.

  • How find the trigger of a process chain ?

    Hello all,
    I working in BW 7.0 . The process chain existed before my arrival in society and unfortunately I have no documentation of interlinking process chains.
    I have a chain process which must start with an event. But the process chain does not start and I would find the job or the process chain that triggers this event.
    Thank you in advance
    Patrice

    Hi,
    Can u make it clear whehter the event triggers the chain or the chain triggers the event???
    Do u know at what time the event finishes/starts daily....??
    Take the timings either before/after and go to sm37-> give some previous(past) dates ->job name as BI_PROCESS_TRIGGER->select finished...
    Then u may get some jobs which are finished at that particular date and event....
    then go to that log->step->menu bar->go to->variant...
    here u'll get the technical name of the process chain..
    from here u can easily trace the chain in RSPC..
    rgds,
    nkr

  • Ipod stolen-Is this a clue to find the person who has it?

    Hello everyone,
    My child's engraved ipod was lost/stolen several months ago. It was upgraded to the latest OS, also had "Find my iphone" installed.  She had various apps on the phone, including magicjack and Tango. She made several calls to me via the temporary number that magicjack assigned. She also used Tango to call me in the past.
    FAst forward to 2 weeks ago. I was looking through my Tango app and saw the picture of a stranger. When i looked, the picture of this stranger was associated with the magic jack number that was assigned in my daughter's lost ipod.  Could it be that the person in the picture is the owner of the ipod now?  HOw did they get the number if the ipod was password protected, so they could not use the magicjack app?
    if it is indeed the photo of the new owner, how do i go about finding them?
    Thanks

    Hi irmbb,
    If you have questions about what to do in the case of a lost or stolen iPod Touch, you may find the following article helpful:
    Apple Support: What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/ht5668
    Regards,
    - Brenden

  • To the person who runs this Discussion

    I have been unable to find a contact to send you a message.
    On the page of this discussion that lists the headers of all the topics, at the bottom after the last topic on the page, a link is offered named "More". On clicking this, a second page appears (and then later pages), continuing the list of topics. When I select a topic on the second (or third) page and reply to it, I am automatically returned to the first page. I than have to scroll down to the bottom, press the More link again, and hunt for the last topic that I read. If I were on, say, the third page, I have to scroll down twice and press More twice, and so on. Each page is re-downloaded for obvious reasons (given the large amount of traffic on this discussion.) By the time that I reach the third page, it is quite a hunt to find the last topic that I visited so that I can continue to browse. This is inelegant and wastes time.
    In the iMac (Intel) discussion, (also heavily trafficked) the other method of accessing later pages is used. That is, by a button marked Next. Having pressed that, I stay on that second page (or third page) and am returned to it, and do not have the fuss of repeatedly pressing More.
    I have looked at "Your Stuff" but there seems no relevant preference. Therefore, how can I select the second method for all topics.
    Thanks.

    Is it caused by using different tabs to get to the topics?
    First option (Overview tab):
    has this at the bottom:
    I'm guessing that it the 'More' you are referring to?
    Second option (Discussions tab):
    has this at the bottom:
    I've used the Set as default tab option for the Discussions tab for this Forum.
    Regards,
    Colin R.

  • A big thank you to the person who said to go to edit/preferences/advance tab.  I did that but I could not find my external hard drive which is a passport.  I could not find it on my pc or control panel.  I know it it there.  Help!!!

    A big thank you to the person who said to go to edit/preferences/advanced tab.  That helped.  My external hard drive is a passport.  I know I have it ,  I just can't findit.  Not in control panel or desk top.  I don't know how they named it.  Please help!!!

    What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

  • How to find out the person who did a transport.

    How to find out the person who did a transport.
    There are 3 basis admins in our Org.
    so is there a way of tracing out , who did what transport.
    Regards,

    - Goto import Overview (STMS)
    - Import Queue
    - Select DEV req (goto Import History)
    - Edit - Display More
    It will show the user who did the transport
    Rgds

  • My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to be

    My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to being offline will the location still be sent to me? And also, how can I retrieve my pictures from my iCloud?

    Anything is possible.

  • I am able to see my ipod touch 5th geneneratio in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

    i am able to see my ipod touch 5th geneneration in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown/shown off, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • My phone was stolen, but I had no data left and so can't locate it till the person who has it tries to use the internet. I backed up all my photos on iCloud, and want to get them on my PC. I installed iCloud onto the PC and still can't find my pictures?

    My phone was stolen, but I had no data left and so can't locate it till the person who has it tries to use the internet. I backed up all my photos on iCloud, and want to get them on my PC. I installed iCloud onto the PC and  followed the instructions and still can't find my pictures, says my photostream folder is empty, but it shows on iCloud that i've used most of my storage which is true, so they must be there somewhere?
    Any ideas? I'd really appreciate the help! Thanks

    Yes, I filed police report, but there is nothing they can do until I get back to them on the tracking. It's been offline. I'm sure the whoever took it can find a way around breaking in the ipad..i really was hoping to get my pictures and videos of my kids back

  • I've lost my iphone with passcode lock and find my iphone lock on but the wifi n cellular data was turned off so no way i can trace it so the only question remains is will the person who finds it be able to unlock it and use it as his own ?

    i've lost my iphone with passcode lock and find my iphone lock on but the wifi n cellular data was turned off so no way i can trace it so the only question remains is will the person who finds it be able to unlock it and use it as his own ?
    is it possible to change imei number?
    i've tried for so many times n still the phone is offline so i've set it to offline mode with my message but it never shows the last location why?

    If the device is found, nobody can use it without knowing your Apple ID and password.
    The phone will only show it's location if it is connected to cellular network or Wi-Fi. If those options are switched off, you can't locate the phone.
    With iOS 7, Find My iPhone includes a new feature called Activation Lock, which is designed to prevent anyone else from using your iPhone, iPad, or iPod touch if you ever lose it. It starts working the moment you turn on Find My iPhone in iOS 7. With Activation Lock, your Apple ID and password will be required before anyone can:
    Turn off Find My iPhone on your device
    Erase your device
    Reactivate and use your device
    This can help you keep your device secure, even if it is in the wrong hands, and can improve your chances of recovering it. Even if you erase your device remotely, Activation Lock can continue to deter anyone from reactivating your device without your permission. All you need to do is keep Find My iPhone turned on, andremember your Apple ID and password.
    What steps should I take if I misplace my device?
    If you ever misplace your device—whether it’s just lost or you think it may have been stolen—you should put it into Lost Mode immediately using Find My iPhone.
    Lost Mode locks your screen with a four-digit passcode and lets you display a custom message with your phone number to help you get it back. You can also remotely erase your device if needed, and your custom message will continue to display even after the device is erased.
    While Activation Lock works in the background to make it more difficult for someone to use or sell your missing device, Lost Mode clearly indicates to anyone who finds your device that it still belongs to you and can’t be reactivated without your password.
    To put a device into Lost Mode, sign in to icloud.com/find from a Mac or PC or use the Find My iPhone iOS app.
    For more information, read what to do if your device is lost or stolen.
    copied from iCloud: Find My iPhone Activation Lock in iOS 7

  • How to stop the running process chain

    How to stop the running process chains or infopackges...just qm status change is enought?

    BI - SM 37 - Kill the Job
    ECC - SM 50 - Kill the job

  • Is it possible to run process chain from the certain process/point?

    Hello
    Is it possible to run process chain from the certain process?
    How?
    Thanks

    Hello,
    yes it possible! use the following steps.
    1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
    2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
    3. t codese37>> run FM RSPROCESSFINISH.
    4. give the deatils u have got in RSPROCESSLOG table here and say execute.
    This will solve ur problem.
    Hope this helps!
    Reg
    Deepmala

Maybe you are looking for

  • How can I get rid of the highlight in the list box

    I clear the T-List in WHEN-NEW-FORM-INSTANCE trigger using Clear_List(list_id). The list will be empty but it will highlight on the first entry in the list. How can I get rid of the hightlight at this kind of situation? Thanks

  • ITunes no longer plays song files in 5.1 - only in Stereo

    Greetings! Unfortunately, since a few days ago, iTunes has stopped playing my songs in surround sound and is instead only using my front speakers currently, while I can play the very same songs in surround sound using a different audio player. I've t

  • Onload event after all images are loaded in an updateContent area

    Hi Spry Folks! I load a template into a page with a lot of img tags inside it. Everything works fine. Spry.Utils.updateContent (...HTML wit lots of img tags...) But the loading takes a while so I would like to hide it until all the images are loaded.

  • Getting userid by code

    HI Can anyone tell me what is the code to get the userid of the user loged in currently. I m using the following code . But getting some error in this . IUser user = UMFactory.getUserFactory().getUser("j2ee_admin"); user.getFirstName()); user.getLast

  • BAPI_TRIP_CREATE_FROM_DATA works in SE37, but not from external program

    BAPI_TRIP_CREATE_FROM_DATA works in SE37, but gives error when calling from external program. The error is "Deserialisation failed". I have the WSDL generated by a Web Service wizard in SE 37, so there should not be any problem like element name or c