TO MAKE A REPLY - I CAN'T FIND A "SEND" COMMAND

when i receive a message and hit "reply" I can type a message but then can't find anyway to "send" it. the only choice is to "save" as a draft
TEW

Hello!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS configuration for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support and to ensure that you are subscribed to an adequte data plan to enable this service.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I can't find apply image command

    I'm learning with the Elements 8 trial system.  Trying to blend two photos. The help page gives instructions to us the Apply Image but it doesn't show up when I click image. Where is it?

    Wow!  That took care of my question and then some.  Thank you very much.
    Thank you very much!
    Tim McNulty
    Date: Thu, 16 Sep 2010 05:04:33 -0600
    From: [email protected]
    To: [email protected]
    Subject: I can't find apply image command
    Hi,
    Please Refer the following link it may help you.
    http://www.photoshopessentials.com/photo-effects/elements/photo-blend/
    Thanks
    www.mediacafe.in
    >

  • BASED ON QUEUE NAME HOW CAN WE FIND THE SENDER SYSTEM IN ECC

    Based on queue name how to identify the sender system
    the issue is
    Messages are  are coming from pi to ecc , check below queues. These are incoming queues
    to Ecc from PI. We are trying to find what these queues are. Sometimes these
    are failing and we are not able to process,
    Based on the above information we need to find  the sender system from where it is coming.
    Regards
    MADHU

    Hi srinivas- Thanks for your reply and there is no issue on pi side after reaching to ecc the entries got stucking in smq2 of  ecc system now the target system wants to know on which sender system these messges are coming we are not finding sender system detials from smq2 of ecc system .
    Regards
    Madhus

  • Can't find the ldif2ldbm command and SUNWconn package?

    Hi all,
    I can not I find the ldif2ldbm command. It looks like the command is part of SUNWconn package.
    Any idea?
    Thanks,

    The ldif2ldbm command was a utility for the old SIMS (Sun Internet Messaging System) software package. Are you currently running SIMS in your environment?
    Are you using the Directory Server that came with Sol9? If yes, then use the ldif2dbm command that I mentioned earlier. Also, download and read the Sun/iplanet ONE/Java Directory Server Administration Guide at http://docs.sun.com/ . There's also a DS reference manual and LDAP migration guide, both are invaluable.
    HTH,
    Roger S.

  • I can't find the qtmedia command

    I am new to using Mac OS Server, but I have been tasked with setting up a Quick Time Streaming Server on a Mac Mini Server running Mac OS X Server 10.6. During my reading of the QTSS Setup Manual it refered to the command qtmedia to manulate quick time files. I wanted to explorer and possible use this tool to help me get files ready for streaming, but I can't find the command to run it.
    Where is this file located and how do I access it? Thanks in advanced for the help. -Dave

    The Quicktime Streaming Server Manual refers to the command, but all it says is to run it to find out more. I am dissapointed that the command is missing and that I can't find out anything more about it. My guess is that it is a legacy command that was dropped awhile back and the documentation was never updated. I would like a tool that would streamline the creation of compatable media for streaming, so I hope apple comes up with replacement or addition documentation or tools, but I am not holding my breath. -Dave

  • I can't find the "send a short cut to the desktop" request. where is it?

    In IE, under "file", there's a "send a short cut to desk top" .
    I can't find how to do this with Firefox.... how do you send a short cut to a page to your desk top??????

    Press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (113428)

  • Where can I find DBMS system commands

    Hi:
    Where can I find the references about DBMS system commands like dbms_stats.get_table_stats? Thank you very much.
    Maggie

    Hi:
    Where can I find the references about DBMS system commands like dbms_stats.get_table_stats? Thank you very much.
    Maggie See the Oracle 9i Performance Guide and Reference, chapter 3 Optimizer, subsection GENERATING STATISTICS.
    Also, I think the argument is "gather_table_stats" as opposed to "get_table_stats".
    RP.

  • New Bootmgr for my Thinkpad needed [Old: RnR - Can't find the delete command for older Rescue's]

    EDIT: Read my Reply to see my new much greater problem...
    Hey,
    I recently Updated my Thinkvantage software after a few month and now have gotten the toolbox. There came the Problem up, that i Used RnR the last time like 1 Year ago, which couldn't be.
    I messed around a bit (i only had 50 GB free space and my old recovery file was another 23GB) and startet the rescue giving the new rescue file a maximum of 60 BG, so i have 10 GB free.
    It said, that this might not be enough but i could just give it a try, now i sit at 0GB free, my PC is slow as Hell and so on, i canceled the rescue and deleted some of my files.
    Now I'd like to know how i can delete the Rescue files (the dropdown menu with delete rescue file is gone through the update, so i cannot follow the instruction of the help page), so i have more free space available.
    Also i'd like to know if i then should try another rescue, hoping it fits on the then 70 GB free space (i stopped the rescue this time at about 50%)
    or should i just try my best and get my data on some other volume wich unfortunatelly i don't have with me, as im in another country...
    hope you got all Informations to help me and thanks for your Support
    John
    PS: if it's of importance it's a t500 with 2055A81 with 250 GB storage

    answering to myself with a now much bigger problem:
    1. what happend?
    I just wanted to set back the computer thinking it might run faster again...
    So i started the Thinkpad Recovery(RnR), it rebooted into the thinkvantage RnR Boot mode where it began to recover but stopped after 1 Minute at 0% recovery and didn't get any further in the next 4 Hours (with CPU and HDD idling all the time), as there was no option to stop it and no settings or something i thought it wouldn't do anything at all anymore and switched it off by force...
    ... restart: Bootmgr is missing press Ctrl + Alt + Del to reboot
    2. first analysis:
    i can get into Bios, i can boot from the CD, i cannot enter the Thinkpad OS (via pressing the Thinkvantage Button on startup) and i can't run Windows
    3. Googlin' around
    i found this Artikle from http://www.howtogeek.com/howto/windows-vista/fixin​g-bootmgr-is-missing-error-while-trying-to-boot-wi​..., followed the instruction downloaded the recovery CD, was able to boot from it and tryed to follow the Guide, but on the 4th Picture it didn't show my installed Windows looked around further and further and found:
    http://neosmart.net/wiki/display/EBCD/Recovering+t​he+Vista+Bootloader+from+the+DVD
    trying it out I had success with the Nuclear Holocaust way, so I now atleast can find my Windows in the recovery tool, but still the System-startup-repair was detecting my error but unable to fix it (Error: Botmanager doesn't exist or is damaged; Tried to fix the file with Filerepair; Conclusion Error. Errorcode = 0x2)
    I even found http://forum.notebookreview.com/showthread.php?t=2​12433, where there is a link to the Lenovo/Thinkpad tool with wich I possibly can retrieve something, but my laptop just doesn't have any Floppy drive (i also tried the file uploaded to rapidshare in this thread, which was the diskette but bootable via CD-Rom (didn't work as it seems to be set to drive A: and so i can't repair anything with it))
    4. Conclusion
    - maybe I'm pulling at the wrong end of the rope (http://neosmart.net/blog/2007/bootsectexe-modifies​-the-bootsector-not-the-mbr/)
    - ( http://forums.cnet.com/5208-7587_102-0.html?thread​ID=311230 ) maybe this guy is right and RnR from the thinkpad just wipes your boot files so there is too much damage to fix it
    Should I try to
    a) secure as many Files as possible? (booting with Knoppix(Live Linux Filesystem on Bootable CD)  did not work at all, but maybe i had an too old version)
    b) try to somehow get the RnR from the thinkpad to run again, so it might completely reset the PC to it's former state (No Idea how to do it)
    c) I read somewhere you can launch your installed Vista in safety-mode with a propper CD/DVD, even without the Bootmgr, has anyone Experience with that?
    TIA for any help you can offer me, i don't have the time to send in my laptop, would be great if someone from your developers could write me a little batch file, that i could run via the CMD (i can easily access my USB stick via the CMD provided by the Windows Vista recovery Disk) and which would well give me back the boot entrys that RnR deletes at the beginning or just creates a new one. Something that could remotely start the RnR to just bring back the old state could also work wonders, i used the Option, where you don't have to reinstall all programs, so maybe the RnR which also resets my installed programs would work well and fix the problem...
    I realy hope you guys can help me out as I'm in dire need
    Yours sincerely
    John

  • Can't find Revision Control commands

    Hi there,
    Last week I've upgraded to Snow Leopard but I can't seem to find RCS version control commands like co, ci or rcs itself. Perhaps they were wiped out when trimming to this version. If that's the case, what is the best method to reincorporate them?

    Never mind...I've found them. They are under /Developer/usr/bin

  • On my desktop, how do I eject a cd if i can't find an eject command or symbol?

    I am a new itunes user and can use your help.  I'm sure it is a simple solution.  Thank you for any help in finding a way to eject a cd when there is no eject symbol showing in the usual place. 
    Grateful,
    Ejecthelp

    on your keyboard there should be a button that looks like a triangle sitting on a line, that is the eject button. If you hold that down, the cd should come out, but if it doesn't then something is wrong.

  • Update Itunes version, now can't find"eject ipod"command

    Every time I update Itunes I get some quirky problem.  Just updated itunes version last night and now in the itunes tool bar, after syncing I have no "eject owners ipod command on the tool bar...diagnostics says Ipod recognized...sincs okay.  ???

    Hello dearel,
    Perhaps this Support document can assist you.  It providies all the ways you can safely disconnect/eject your iPod.
    http://support.apple.com/kb/ht1853
    B-rock

  • Where can I find a good pool manager? or ...

    I need a pool manager or I must make it myself?
    which is the different between DataSource and ConnectionPoolDataSource?
    if I use ConnectionPoolDataSource to make database connection then if pool manager are needed?
    if need ,how to make it?Where can I find the tutorials about it?

    There are a few examples of pools on the web (as the previous reply quoted), and you could try www.javaworld.com/javaworld/jw-06-1998/jw-06-object-pool_p.html for a tuition.
    The difference between DataSource and ConnectionPoolDataSource....hmm....they are both interfaces allowing providers (JDBC driver manufacturers, J2EE App Server manufacturers etc) to implement concrete classes that comply to certain method signatures.
    Basically, uisng a Datasource will return a Connection, whereas a ConnectionPoolDataSource will return a PooledConnection, which in turn will return a Connection. However !!NOTE!! these classes DO NOT create a data pool on their own, and still require you to code your own pool (which is a bit misleading when you consider the names of the interfaces).
    Hope that helps a little.

  • IWeb works, but I can't find the domain file!!!!

    OK - this one has had me stumped for a few days now... I have iWeb (vs. 1.1.2 - from the '06 iLife). I need to find the domain file. It isn't in the home/library/app. support/iWeb folder. I didn't move it. I searched for it using command-F and using spotlight on my computer.
    iWeb is to reset and start from scratch if there isn't a domain file on your hard drive. So I know it's there somewhere (at least, I think it is?). My site is there. I can publish. I can make changes, however I can't find the domain file to make a back up of it. I don't think that I made it invisible - could I have somehow done that? And if so, is it possible to find it? I believ the program only works if the file is named "domain" so I don't think that I could have accidentally renamed it.
    Is there someone out there who can help me? I don't want to have to start from scratch and rebuild the websites.
    Thanks for your input!

    This is from Multisite's Technical Page:
    Technical Information
    While you don’t need to understand how data is stored to use Multisite for iWeb it can be helpful occasionally to understand what is going on behind the scenes. At a nuts and bolts level Multisite for iWeb stores all of its sites in your home folder’s Documents folder in a single package (which is really a fancy folder dressed up to look like a file) called “Multisite for iWeb Data.mfi.”
    You can open that package like this.
    Once you get your domain file straightened out I'd definitely get Varkgirl's Automator application to make frequent backups of that file. You can get it Varkgirl's iWeb Tips and Tricks site.

  • Can't find the msfc2 module??

    by mistake i changed the regiter num of 0x10f to some other value,then i can't find the msfc2 module,i wonder if there is the conditions that can make the switch engine can't find msfc2 module.cause i think the 6000 series start sequence was the catos start ,find every module pluged in then use the session to connect to the router module IOS.there is no reason for start up with catOS but can't find the msfc module....(for example if you erase the IOS in the MSFC module,it also happen that can't find the msfc2 module)

    Yes, I want to publish the web gallery online. Publishing the web gallery is easy, I know how to do that, the only problem I'm having is that it (Lightroom) does not want to use the original size of the image., I am using the Simpleviewer gallery style (or Engine as Lightroom calls it). If I really wanted to, I could just create the gallery using the stand alone version of Simpleviewer (that doesn't require Lightroom) because it allows for the use of the originally sized images, but Lightroom allows for an easier way to customize the pages and that is why I have Lightroom.

  • Can't find effect to change edges

    I want to make a cube. In PRL4 you can change the edges but in PREL 7 I
    can't find this effect/command. Can some tell me the name of the effect?

    Well I did a cube in PSEL 7 and I want to take 3 video clips and place them <br />on the cube. I can't find the effect that lets you take the edges and skew <br />then to the cube.<br /><br /><br /><[email protected]> wrote in message <br />news:[email protected]..<br />> It's not clear what effect you're trying to create, Loretta. Can you post <br />> or link to an example?

Maybe you are looking for