To migrate SAP business connector scenario to SAP XI.

Hi,
   I want to migrate my IDoc-http sap bc scenario to sap xi.
1:What the basic things do i need ?
2:what basic steps do i need to perform to migrate a sap bc scenario to sap xi?

Hi Shewta,
from a BI perspective, please check the HowTo-Papers available in this area.
You find them at:
<a href="https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073641&_SCENARIO=01100035870000000202">SAP Service Marketplace HowTo guides</a>
  Cheers
     SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Similar Messages

  • Business Connector Scenario .

    Hallo ,
    I have been given a  scenario, where SRM sends a PO sheet in XML format to BC.I have to map some elements of the XML to the elements of client's application.
    They require the xml to be ftp ed to FTP server, from there it's used for application.
    My questions:
    1) Where can i find the XML file which is sent by BAPI from SRM system.
    2) Is just mapping enough ?? and what are the services available for this task.?
    3)Service used for FTP and from there how to map to application of client??
    Thanks in advance for all ...for your help
    Srini

    hi,
    >>>>1) Where can i find the XML file which is sent by BAPI from SRM system.
    did you try with SRM content for business connector ?
    >>>>3)Service used for FTP and from there how to map to application of client??
    pub.client.ftp:put
    >>>>2) Is just mapping enough ?? and what are the services available for this task.?
    depends on what your client's application expects
    maybe you will need to do some lookups etc <-- you need to find out
    Regards,
    michal

  • Migration from Business Connector to XI

    Experts,
    when migrating from BCo to XI, what is the approach?
    What r the things that can be considered?
    How can we compare XI and BC?
    Any links should help me.
    Thanks,
    -Naveen.

    Hi,
    Have a look on:
    this SDN thread:
    How to move SAP BC config automatically to SAP XI?
    this SAP doc:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
    others found thanks to google:
    http://www.reply.it/upload/File/pdf_boxjolly/eng/CAPR05_sapXI_ENGLISH.pdf
    http://www.asug.com/client_files/Calendar/Upload/MigrateToXI%20ohio%20asug.ppt
    Moreover a session will be organized to the SAP tech:
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/92e6dde6-0901-0010-f3a3-9ed771f90e71 [original link is broken]
    Hope this help you
    Mickael

  • Copying a Business Connector System

    Hi,
    I'm in the process of migrating our business connector system to another server. The server will be built on the original OS and Business Connector release.
    Is there a way which I can just copy over the business connector settings to the new server or do I require a re-installation. How can I copy across the configuration?
    I appreciate your suggestions!
    Thanks for your assistance.

    Hi,
    you can do a basic installation and then just copy the folder sapbc47 or whatever.
    All the configuration will be included as it is under this folder.
    So here are the steps:
    1.make the installation
    2.using file explorer rename the installed server folder lets say sapbc47
    3.Copy the contents of the previous installation at the installed folder sapbc47.
    All the configuration will be included.
    you can start the server from windows command under sapbc47/server/bin/server.bat -log none -debug 5 or by windows services if you have installed it as a service..

  • Business Connector to SAP XI migration

    Hi Experts,
    1)Customer is using Business connector  with R/3 46C .
    2) Now R/3 4.6C  will be Upgraded to ECC6
    3) We need to first find out if the BC will work with ECC6 or not. If not we will need to give them the Approach for BC to XI Migration.
    if XI has to be used what will happend to the interfaces running in BC ...is their any way that we can use that in XI and work....
    or ...we need to do developmet from the scrach...
    Thanks
    Rupesh

    Hi,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
    http://www.sap-hefte.de/download/dateien/917/052_lesesprobe.pdf
    Business connector --
    WAS - Business Connector
    business connector documentation
    SAP Business Connector
    Business connector
    Will Business Connector 4.6 be affected by new  Daylight savings changes
    Business connector
    More info on XI can be found at https://service.sap.com/xi
    and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
    Check this also-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
    http://www.yellow2b.com/Yellow2B-Content_C-Content_full_1112108163571.html
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
    Thanks,
    Satya Kumar

  • SAP XI over Business connector

    Hi All,
    As everyone is aware that SAP Business connector is no longer supported by SAP and XI has replaced it in quite many places.
    I would like to know the advantages of XI replacing Business connector in a project scenario.Also any disadvantages that XI still has over BC?
    I would like to have the reply in detail as this is required for suggesting XI as a replacement for BC.Also the cost benefits highlighted would be of great help.Inputs for this query would be highly appreciated and rewarded.
    Thanks in advance!!

    Hi Ramya & others,
    we at Lost Bearings International have brought the BC2XI(TM) to the market and together with partners delivered successful migrations to XI using it as the underlying platform.
    We are currently working on Version 2 of the migration platform to allow for a more scalable use for 100+ BC project migration scenarios at larger customer sites as well as a more generic migration process which will assist in migrations from other EAI platforms to XI on top of the current BC to XI one.
    Best way find out more is to contact us directly through http://www.lostbearings.com/exponent/index.php?section=3 and we can discuss the evaluation steps to give you an idea about cost & time savings you can achieve through the BC2XI service offering.
    Unfortunately the information on http://www.bc2xi.com is a bit outdated at the moment, but this should be updated in the near future.

  • Corefix 7 in SAP Business Connector 4.7

    Hi,
    We are currently using sap business connector version 4.7.we have 2 systems production and test,where in our production system is at Corefix 5 and test system is at Corefix 6.
    I need to know what are the patches and fixes provided by Corefix 7 in business connector,also a comparison with other corefixes.
    Thanks in advance!!
    Regards,
    Ramya

    Hi Ramaya,
    I am currently working on BC 4.7.
    I have established one HTTP to IDoc scenario.
    I want to know more about XSLT mappings in BC.
    What is it's structure?
    How we can use it in this scenario?
    Can you please help me?
    Waiting for your reply.

  • PI 7 to SAP Business Connector Connectivity

    Dear Gurus,
    I have to connect our ECC 6.0 System to another ECC 6.0 System using B2B scenario. For B2B purposes we are using PI 7 while the other party is using SAP Business Connector (SAP BC) as it's front-end-tool for ERP-to-ERP connectivity. I am a Basis Consultant and I have been given the task of doing this connectivity. I have never worked on any business connector. Can anyone guide me in this? We do not have any PI Consultant
    Also advice what infrastructure will be needed to complete this connectivity
    Request you all gurus to kindly advise asap
    Best Regards

    Well, a PI consultant would be a better choice as you will have to learn some basics before you can implement your project. PI is not an easy system as business connector and it requires deeper skills and expertise on the tool, but with some effort, certainly you can do it yourself.
    I do not have any experience on the administration of a dispatcher, so I cannot guide you on that subject. But after achieving the connectivity between the two dispatchers, the rest is the PI development task.
    It seems that your scenario is not really a hard one. Play around with the tools(in PI) and try sample scenarios to get used to it. Here are some for your convenience:
    And the PI (formerly called XI) library that covers almost everything is here:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
    With the help of the documentation and the sample scenario blogs, you will be able to develop your scenario. But gathering the required skill will take about a month or so, depending on your performance.
    After learning the basics, you also need to work on monitoring, alert definitions, going live pratice etc. also which you can also find examples in the blogs. Furthermore, if the messages exchanged are to be changed before reaching the ERP on the PI side, you will also need some mapping practice. Here are two blogs which will teach you graphical mapping in PI:
    /people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
    /people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
    A B2B scenario can be partly auto-configured after definition of relevant integration scenario in the Integration Builder so it might be a good idea to learn it. I'm assuming you don't need any business processes(which automates A2A and B2B processes, for example a full order-to-cash scenario involving many systems and communications with business logic), so you will mostly need configuration instead of development. You also won't need any ABAP or Java skills in your case.
    The content on SDN about PI is pretty rich so I don't think you will be short on examples and instructions. Just search when you need something, almost every aspect is covered by now.
    Hope these are useful, feel free to ask anything you may need.
    Regards,
    Gökhan

  • SAP Business Connector : Simple Test

    Hi Folks,
    Before I start , let me mention here that I am completely new to BC . And my requirement (I think) is also very simple.
    I have installed the business connector developer in my pc , and the BC server connection to SAP server is also working alright.
    My requirement is very simple , I want to pass a XML document to sap server . It is just a simple test as I am not going for any middleware setup etc.
    I just want to send this XML document to SAP for testing . I have tried by creating a "Flow" which expects a XML document but somehow it does not seem to work .
    Kindly let me know if possible the manual steps for sending XML doc to SAP.
    Thanks in Advance....

    You may use the standard developer's guide example to configure your scenario.
    Suppose you have File to RFC scenario.
    1. First create a structure for file system. This should be created as a Record in BC. Import the RFC structure too in BC.
    2. There is a standard ftp service (I guess in WmPublic package) which should be the first flow step of your flow service.
    3. Then use map steps to map the Records of file structure and Idoc.
    4. Then you may use imported RFC flow step to call RFC.
    5. At server, you need to define to routing rule from SAP BC -> R/3.
    Regards,
    Prateek

  • SAP business connector 4.8

    Hi Experts,
    Request you to please suggest me.
    i am new to SAP BC. my team given me work to migrate SAP business connector 4.8 one location to new location. So request you to please suggest me how i can achieve this task.
    Thanks,
    Navneet Kumar

    Hello Tanja,
    Go through these discussions..
    http://www.wmusers.com/forum/thread6212.html
    http://www.wmusers.com/forum/showthread.php?t=13377
    Thanks,
    Satya Kumar

  • SAP ECC 6.0 -- Business Connector / Error:Input values do not contain IDOC

    Hello,
    We have a scenario R/3 4.6C ORDRSP to the SAP business connector which is running fine. When I send the first IDoc the routing roule is created automatically and it can be adapted.
    Now we switched to the ECC 6.0 system but I get the following error message:
    "Input values do not contain IDOC" and no routing roule is created either. The status of the IDoc is 03.
    Do you have any idea what the problem could be? Could it have anything to do with ECC 6.0?
    Thank you for your support.

    Hi,
    I hope you must have added new SAP ECC system under SAP tab on SAP BC page.
    To check exact error information:
    FIrst open SAP BC page in browser (http://localhoet:port)
    Go to transaction tab, and there under TID box, enter transaction id corresponding to SM58. And check what it says.
    About routing rule:
    BC automatically creates routing rule, if not you can edit and direct them to correct process flow, or you can create new routing rule, as BC need routing rule to move IDOC ahead.
    Please let us know further about error information, so that we can help you further.
    Divyesh

  • SAP Business Connector on Windows XP

    I've been trying to get the SAP Business Connector 4.7 to work on Windows XP professional but haven't been very successful. The business connector seems to install okay, but when I try to start the business connector through the server.bat file it generates the following errors:
    (loglevel = 4) 
    Loading WmPartners package
    00000E  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.EmailTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.EmailTransport
    00000F  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:saveMessage: [B2BSERV.0026.9106] No method saveMessage in class wm.PartnerMgr.xtn.admin
    000010  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:view: [B2BSERV.0026.9106] No method view in class wm.PartnerMgr.xtn.admin
    000011  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:saveRoutingRule: [B2BSERV.0026.9106] No method saveRoutingRule in class wm.PartnerMgr.gateway.admin
    000012  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:convertWildCards: [B2BSERV.0026.9106] No method convertWildCards in class wm.PartnerMgr.gateway.admin
    000013  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.B2B:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.B2B
    000014  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:editStore: [B2BSERV.0026.9106] No method editStore in class wm.PartnerMgr.xtn.admin
    000015  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.FTPTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.FTPTransport
    000016  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:invokeViewService: [B2BSERV.0026.9106] No method invokeViewService in class wm.PartnerMgr.xtn.admin
    000017  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:viewMsgContent: [B2BSERV.0026.9106] No method viewMsgContent in class wm.PartnerMgr.xtn.admin
    000018  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:updateTransports: [B2BSERV.0026.9106] No method updateTransports in class wm.PartnerMgr.gateway.admin
    000019  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:invokeService: [B2BSERV.0026.9106] No method invokeService in class wm.PartnerMgr.gateway.admin
    00001A  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:log: [B2BSERV.0026.9106] No method log in class wm.PartnerMgr.xtn.admin
    00001B  [B2BSERV.0028.0005] Loading SAP package
    00001C  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.RFC:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.RFC
    00001D  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.BAPI:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.BAPI
    00001E  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.XML:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.XML
    00001F  [B2BSERV.0026.0002] Failure while loading service sap.bapi:encodeToFile: [B2BSERV.0026.9106] No method encodeToFile in class com.wm.pkg.sap.bapi.BusinessDocumentCoder
    000020  [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2rfc: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
    000021  [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:rfc2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
    000022  [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2ale: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
    000023  [B2BSERV.0026.0002] Failure while loading service sap.admin:listGatewayServices: [B2BSERV.0026.9106] No method listGatewayServices in class sap.admin
    000024  [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:ale2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
    000025  [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.ALE:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.ALE
    000026  [B2BSERV.0028.0005] Loading WmSamples package
    000027  [B2BSERV.0028.0026] Warning: Deprecated service type (webtap) in service sample.webtap:logApp in package WmSamples
    000028  [B2BSERV.0028.0005] Loading WmDB package
    These errors don't stop the business connector from starting up, but the errors are not normal behaviour. When I try to start the business connector through a Windows service then I get the message "Could not start the SAP Business Connector Service on Local Computer. Error 126: The specified module could not be found".
    I have a working business connector installation on a Windows 2000 server, and when I checked the error log of that installation I noticed that it had logged the same errors about the 'WmPartners' package. It on the other hand didn't have any problems loading the 'SAP' package.
    I tried installing the business connector on two different systems with identical results. Has anybody been able to get the business connector to work on Windows XP?

    HI,
    I have no idea clearly about BC.. but ..
    See the following links.. may be helpfull..
    Business connector
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8609b90-0201-0010-c6bc-a41b611c6dac
    SAP Business Connector on Windows XP
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92e5bd90-0201-0010-b799-dfdc27f3100a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
    If usefull .. points rewarded..
    Regards
    Chilla..

  • How do we Integratet SAP to Non-SAP Using Business Connector

    Hi Experts,
    I am new to SAP Business Connector !!
    and what are the Forms ? for SAP Business Connector Related Postings ??
    !! I have a requirement to integrate sap to non-sap with Business Connector !!
    We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
    Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from  that How do we Sent XML file to Non-sap. How do we Integrate ??
    what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
    For Eg. like in R/3  SD to FICO and MM Integration.
    Please Give your Valuable Suggests..
    Thanks .
    Upender.

    Hi,
    It is not an issue, It will be a separate project :-).
    The right forums for this,
    Expert Forums » SAP NetWeaver » Process Integration
    www.wmusers.com
    Also go through the following links:
    http://www.sapgenie.com/interfaces/businessconnector.htm
    http://www.sapgenie.com/mysap/bus_connector.htm
    /people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
    http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
    https://websmp104.sap-ag.de/connectors
    Thanks and Regards,
    Chandra Madapati

  • NULL Value in SAP Business Connector  (BC47_CoreFix7 )

    Dear All,
    I am working with SAP Business Connector and some times i get NULL value in (PROXY SERVER) in Secure Proxy (HTTPS) so i need usualy to remove it manully and save the changes.
    Would you plesae help me to solve this issue either to delete automatically or to have any idea to prevent getting this NULL value.
    Thanks in advance..
    Message was edited by: Hassan Hakeem

    Dear,
    i need the answer ASAP pleasssssssssssse.
    Thanks..
    Message was edited by: Hassan Hakeem

  • Flat File Transfer from SAP R/3 4.7 to SAP Business Connector 4.8

    Hi Experts,
    I have a requirement of transferring a flat file from my R/3 SAP 4.7 Box Application Server to the Business Connector 4.8 Box. I am new to SAP Business Connector and I am not to sure whether FTP works if I use a shell script in SAP R/3. Also, is there any way Business Connector Box can pull the file from R/3 Application Server and store the file in the Business Connector Server.
    Any help will be appreciated!!!
    Regards,
    Subhhrangsu

    Hi,
    There are many ways thru which you can pass document to SAP BC:
    You can HTTP, FTP, Email document to SAP BC.
    SAP BC has predefined services for all of them.
    For FTP document to SAP BC:
    1 Initiate an FTP session on SAP BC Serveru2019s FTP listening port ( this can be found out from SAP BC administrator or from SAP BC homepage).
    2 Point to the directory that contains the service to which you want to pass the XML
    document.
    Example cd \ns\Purchasing\SubmitOrder
    3 Copy the XML document to this directory using the following command:
    put XMLDoc.xml
    Where XMLDoc.xml is the name of the file that you want to pass to SAP BC Server.
    Example put PurchaseOrder.xml
    Above code can be written in a batch file and you can schedule it to run at interval of minutes.
    You can write java client program as well to upload file and map it to String variable of Flow service of SAP BC.
    As Micheal said, you can look at sapbc/Developer/doc folder to look for more options.
    Best Regards,
    Divyesh

Maybe you are looking for