To print  a long vertical line

My requirement is to simply print a long vertical line in the output.
If you do this fav you will be rewarded with more points.
regards
Posh

Hello,
try this code
DATA: itab LIKE mara OCCURS 0 WITH HEADER LINE.
SELECT * FROM mara UP TO 50 ROWS INTO CORRESPONDING FIELDS OF TABLE itab.
SKIP 2.
ULINE AT /1(54).
WRITE:/
sy-vline,
AT (19)  'MATNR' COLOR COL_HEADING INTENSIFIED NO-GAP,
sy-vline,
AT 23(13)  'ERNAM' COLOR COL_HEADING INTENSIFIED NO-GAP,
sy-vline,
AT 38(17)  'PSTAT' COLOR COL_HEADING INTENSIFIED NO-GAP,
54 sy-vline.
ULINE AT /1(54).
LOOP AT itab.
  WRITE:/
  sy-vline,itab-matnr,
  sy-vline,
  23 itab-ernam,
  sy-vline,
  38 itab-pstat,
  sy-vline.
ENDLOOP.
ULINE AT /1(54).

Similar Messages

  • My cursor has long vertical line at times

    My cursor has long vertical lines at times. When I hover over a link, the cursor doesnt' change to a hand

    I don't know if this applies to LCDs, but the iMac G3 and eMac had "geometry settings" in the display preferences. If you messed up the settings, things like lines on the bottom and skewed images could happen.
    I wonder if the factory geometry settings are off on your iMac? There is no way to set these with System Prefs.
    I found someone asking about it here: https://discussions.apple.com/thread/3019584?start=0&tstart=0

  • Vertical lines in calendar gone from display

    The most common format for calendars is for each day to be bordered by horizontal and vertical lines, in Month view. This is indeed how my calendar month looks when printed. However, vertical lines are gone when viewed on my MacBook Pro display (Calendar v. 7.0 and OSX 10.9.5). It bothers me, in the same way a wristwatch with tic marks, instead of numbers on the dial, requires more attention. Someone said to me " I have vertical lines on my calendar." Did Apple omit the vertical lines from Calendar month view or is this abnormal. Can I get my vertical lines back?
    Thanks
    H

    No,  very uncommon.  Only seen same on a very few older Airs.   Possible break in the monitor cable to your LCD LED backlit monitor. Also possible is bad connector at logic board to monitor cable on female connector on logic to cable. Also possible is bad GPU (still logic).  Either way its only 2 possibilities on parts.
    If you're in warranty. thats great.
    Backup ALL data to external HD....and make a call for warranty work on your Air.
    The Air is very easy to service to replace parts for same.  Your down time should be minimal.

  • How can I arrange bookmarks in a grid format instead of a vertical line?

    Windows has a IE Favorites folder, containing favorite websites, and all of these favorite website folders and links can be viewed in a grid format (spread horizontally and vertically). Firefox Bookmarks: I can only get to display in a very long vertical line. Is there an internal file folder containing all of my Firefox Bookmarks? And if so, can I display them in a grid? Thx.

    Sorry, no there is no way to arrange or view bookmarks in multiple columns or a grid built into Firefox.
    Bookmarks aren't stored in a folder in Windows like with IE, they are stored in a database file named '''places.sqlite''', along with browsing history and downloads history.
    There have been a couple of different extensions available over the years that did display bookmarks in multiple columns, but those extensions were short lived and never were really finished before the developer lost interest and stopped working on them.
    Suggestion - folders within folders will spread out to the right, somewhat in a "columns fashion" across the screen. But with the current placement of the bookmarks button I don't know how well that would work; I haven't even tried it out. Personally, I have used the Bookmarks Sidebar for viewing my bookmarks since I started using Firefox in 2002.

  • Printing using Mail - Vertical printing over several pages error

    Hi All.
    Wonder if anyone can help here?
    When I want to print any email from Mail, for some odd reason the email gets spread out over several pages or more depending on the size of the email. The text is printed in one vertical line consisting of one letter per line, like this:
    t
    h
    i
    s
    i
    s
    h
    o
    w
    I have to copy and paste each email into text edit and print from there.
    If anyone can help, that would be great.
    Cheers
    Steve
    G4   Mac OS X (10.3.9)  

    Hi All.
    Wonder if anyone can help here?
    When I want to print any email from Mail, for some
    odd reason the email gets spread out over several
    pages or more depending on the size of the email. The
    text is printed in one vertical line consisting of
    one letter per line, like this:
    t
    h
    i
    s
    i
    s
    h
    o
    w
    I have to copy and paste each email into text edit
    and print from there.
    If anyone can help, that would be great.
    Cheers
    Steve
    G4   Mac OS X
    (10.3.9)  
    Hi Steve,
    I have the same problem with the text in Mail printing very narrow like what you described. Did you ever get a resolution to the problem?
    It seems like it was never answered in the forum replies.
    Hope you can help out if possible.
    Danny

  • Vertical line problem

    hi guru,
    in my script one box i created.
    in this box , horizontal line coming when i took print out
    but vertical line not comes when print.but in print priview
    it shows perfectly.
    i asked basis gye but he told printer have perfect set.
    and for my other forms also vertcal line has noproblem.
    please help
    thanks
    subhasis

    Hi,
      Here i can suggest 2 things...
    1) change the page size of your Script to the paper size on which you are taking the printout.
    2) by changing the window size......

  • How can I remove vertical lines when printing from Aperture 3.2.2 to Epson Stylus Photo RX690?

    I have been generally quite happy with my access to and use of Aperture 3.2.2 (recently purchased) for import and manipulation of photos and movies, etc.I am using Aperture on a MacBook Pro OSX 10.6.8.
    However I have been unable to print high quality images on Epson premium glossy, glossy or matt paper on my Epson Stylus Photo RX690.
    High quality prints on screen show perfectly in preview, but all prints come out with good and accurate colours, but a series of vertical lines or bands of lines across the photo print.
    Using the Aperture Manual I have checked my settings in Aperture for the printer, for colour and quality of paper etc and they all seem to be correct.
    The Epson Printer is networked with a Toshiba (Vista) laptop which prints perfect results from Picasa and Photoshop with fine colour and no markings.
    I would appreciate any help please.
    Cam Opie

    Thank you Mark
    I thought I had done all the settings .....but no.
    I now have perfect prints. Easy when you know how!!!
    Cheers
    Cam

  • When I print a picture and send it to my HP e-mail address I get vertical lines in the picture?

    I would like to know how to get rid of the vertical lines in the pictures when I send a picture to my HP e-mail address that came with my new printer also I seen in the HP E printer settings that there is no 4/6 option to select
    the 5510 Smart printer that I have I was disappointed to find out that the fandango app is not compatible with this printer
    and I was wondering when it would be available for my printer.
    how to fix that problem with the E print feature on my printer.
    thank you for any assistance that you could give me
    This question was solved.
    View Solution.

    Hi Shiba,
    I understand that your printer is not printing picures as expected.  I know you stated that you had tried troubleshooting steps above.  Where you able to take a look at this document?  Are you printing from a mobile device or computer?
    Hope this helps.
    **If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

  • I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

    I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

    What model iMac? Could be a failing video card but maybe not. Is it that way on every screen, startup to shutdown, any time the screen is lit?
    Do you have an AASP nearby? Time to have an estimate made. Fixing it will likely be very expensive.

  • HP Officejet Pro 8610 bought 2 weeks ago. giving vertical lines while printing.

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

  • How to print vertical lines for line items?

    hi experts,
                    can any one tell me how to print vertical lines for line items in ascript?
    ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
    thanks &regards
    narendar

    hi narendar,
    Welcome to SDN.
       u can go for box command.
    Use the box command with zero width for vertical lines.
    Position the line by x position and y postion.
    syntax :
    BOX <xpos> <ypos>
           <width>
          <height>
          <thickness in twips> twips.
    Regards,
    Arun.
    Reward points if useful.

  • Vertical Lines in PDF printed from ACAD?

    Hello all,
    I've searched and searched and have found nothing, others are also having this same issue but haven't found a fix.
    Issue: In ACAD I have a TIFF image inserted and i am printing to PDF. When I open the PDF there are vertical lines that show up and also print out. If I print from ACAD to the printer the vertical lines do not show up so I do not believe this is caused by the TIFF image (I've been wrong before though). Is there any setting that would turn these vertical lines off?
    I'm using Adobe Acrobat 9 Standard.
    Thanks!
    Jeff

    Here is an image of the PDF. As you can see there are vertical lines and they do print out. Anyone know why?

  • Vertical lines, like a bar code, only when scanning or copying. Printing from computer is OK

    I get vertical lines , in black & white & color, when scanning or copying.  
    When I print from my computer, all is OK.
    The lines resemble a full page bar code.  I have done a cold reboot & run the HP trouble shooter, all to no avail.
    I do not see a bright light during scan or copy.  Could the problem be a burnt out bulb?

    Hi @TAEZZAR 
    It certainly could be a the scanner bulb. Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.   Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    ^ This is not limited to Laserjet printers.
    Let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
    Also, please click the link below to ensure the printer has the latest firmware update. This firmware update can improve printer performance and fix miscellaneous defects.
     HP Officejet Pro 8600 N911g_n Firmware (Plus and Premium models)
    HP Officejet Pro 8600 N911a Firmware ( 8600 e-All-in-One Printer)  << For anybody else viewing this thread who may not have the Plus pr Premium model.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Vertical lines when printing a PDF

    Software: Adobe Acrobat Standard 9.1.3.1 (German)
    OS: Win XP Prof SP3
    Printer: Lexmark C935
    Hello Community
    I have a strange problem: When user A tries to print out his building plans in PDF format on a Lexmark C935, there are vertical lines on the printout.
    What I tried:
    User A prints on another client: NOK
    User B prints the same document: OK
    Both users use the same printer with the same driver > shouldn't be a problem with the printer
    User A has the same problem on another client > shouldn't be a problem with the client
    Are there some user-specific settins that could cause these lines? I tried reinstalling Acrobat Standard, but it did not work...
    Any comments / ideas are appreciated!
    Cheers,
    Simon

    Try adjusuting your pdf page display settings (eg: turn off enhance thin lines).

  • Pdf files print with horizontal and vertical lines

    All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines.  I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result.  It is not just that one pdf file either, I have tried multiple files.  HELP.  Does anyone have any ideas?

    It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
    If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

Maybe you are looking for

  • Mac Mini With Philips CRT - 1080i issues

    I have a Philips 34PW9818 High Definition CRT TV connected to my new 1.83 Mac Mini. My TV has a DVI input and supports 1080i or 480p. The only one of these options coming up under System Preferences/Display was for 1920 x 1080 (interlaced). When I ch

  • My feeble attempt at a MB comparison - Asus A8N-E vs MSI Neo4 Platinum

    Hi all, I just thought I'd share a post I just finished submitting at the Asus forum.  Here's my experience, in a nutshell, with both the Asus A8N-E and the K8N Neo4 Platinum: I've decided to give up on the A8N-E and Asus (for now) in favor of the MS

  • J1IIN

    hi friends..           while saving the excise invoice an error " error in updating j_1ipart2". is displayed.                But i have created excise invoices earlier, at that time no error was displayed.                    can anyone help me in rec

  • New Computer:  How to transfer files including thumbnails from old computer to new.

    I am getting a new computer and wish to backup my files including thumbnails and transfer them to the new computer.  What is the best way to get all the information from the organizer onto the new computer? Thanks.

  • Is there a way to test NIVLM using a dummy license file?

    we are testing a situation where an autocad install (Flexlm) crashes a nicely running VLM install. we wan to test this on another server using a dummy license file. just to keep away from the Live environment. Can this be done? ruud  Solved! Go to So