To remove orders from open order report

Hi All.
I am dealing with third party orders scenario.
The order has been made for 10 KG... the GR has been done for 8 KGS and invoice has been created for 8 KGS.
Now because of this quantity difference between billed amont and orderd amount , this order is coming in open order report.
How to make the status of the order complete so that it wont come in the open order report?
Points are assured
Thanks & Regards

Hi
You need Short close the sales order individually or if you need to do it collectively gthen you need to get a program developed for short closing the order based on the requirenment
for individual go to VA02, got to reason of rejection TAB and assign a reason of rejection for the line items which are open  and save
Anurag

Similar Messages

  • Remove Tax from standard order.

    Hi all,
    I have a standard order, Invoice is already created. Customer comes up with Tax exampt certificate, now how to remove tax from the order.
    Pleeeseee Help.
    Thanks,
    Utpal

    One option as suggested is giving credit memo. But I understand that you are facing a limitation for the same.
    The alternative solution could be to pass an FI JV (This will be dobe by FI person).
    Normally such cases will be very few. In that case FI JV is the best solution. If this is repetitive at short intervals, then it is recommended that you configure a separate Credit Memo Type for the same & have a separate pricing procedure in which all condition are manual condition, so that the pricing procedure can be used flexibily. Ofcourse all related configuration for same will be required, which is assumed to be known.
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Creation of service order from sales order

    Dear gurus,
    I am creating a service order from sales order. the system is asking me the variant configurations for the said material.
    But i dont want to use a configurable material. I want to use a general material withour variant configuration and generate a service order using predefined tasklist.
    Please help!

    Hello Prashant,
    if you do not want to use configurable materials in sales order:
    make sure the material cannot be configured (material master view 'basic data2')
    make sure the customizing for the item line does not require configuration (remove the 'configuration strategy' in the customizing for the item line)
    Link your sales material to your task list using transaction OISD
    If you do not wat to configure your task list as well, just make sure it is not linked to a configuration profile.
    Does this help?  
    Nicolas

  • Create refurbishment order from planned order at MD04

    dear all,
    we are converting refurbishment order from planned order usin MD04 (stock requirement lis). when we convert it, there is a error number IW828 with message
    serial number profile is assigned to material X. serialization is obligatory for the serialization procedure considered here.
    its appear after we save it.
    but system still create the refurbish order.
    did someone know where i can put the S/N without entering refurbisment order change menu or (IW32)
    Regards
    Ayu Noorfajarryani

    Hi Girija ,
    You can contorl it by authorization (Remove Authorization of CO01 of users )
    The orders created through MRP are having referance of planed order in addational data tab
    Regards
    Girish

  • Error while creating work order from purchase order

    Dear All,
    We are having a subcontracting scenario where we are creating a Work order from PO but getting the below error.
    Error - "No master data assigned to partners-locations-product combination."
    Done all the setting mentioned in the below thread but the error still persist.
    Error in Generating Work order from Purchase Order
    Any suggestions on which master data we need to check?
    Thanks,
    mahesh.

    Hi Mahesh
    In the below transaction
    /SCA/MFGCFG - Work Order Configuration
    Can you maintain Master data Assigment properly
    Valid From
    Valid To
    Active---Checked
    Can you please list what you maintained
    Regards
    Vinod

  • Automatic posting of purchase order from sales order

    hiii
    experts,
    i m doing automatic purchase order from sales order. i have generated purchase requisition number from sales order now when i m trying to do automatic po the system says no suitable purchase requisition available.I have maintained info record, source code,automatic po tick in material master and in vendor master.what could be the problem .waiting for ur valuable inputs.
    warm regards
    thanks
    subhash kulkarni

    Hello,
    Please check all the things mentioned by our experts e.g Source allocation ,infor record, source list.
    Beside that I would suggest check document flow whether already PO is created or not.
    If every thing is in place then try to create PO with reference to PR by transaction ME21N & see what error you receives.
    Hope this help you ,
    Regards,
    Prashant

  • Creating Production Order from Planned Order

    Hi,
    We are trying to use the BAPI 'BAPI_PRODORD_CREATE_FROM_PLORD' to create Prod. Orders. But it is failing with the message, 'Cannot be saved. Maintain serial no.' Now, the problem is there is no input parameter in this BAPI for providing the serial numbers. Our current Z program manually generates the Serial Numbers and uses BDC for 'CO48' to create the Prod. Order but has a horrible performance and for that reason we are trying to switch to BAPI instead).
    Now, the question is how best to achieve this objective: Use the BAPI to generate Prod. Orders from Planned orders with user-given serial numbers when there is no input option in the BAPI?
    I think of couple of options but not sure how good they are:
    1) Can we create/attach the serial numbers to the equipment/material first and then create production orders?
    2) Use implicit enhancement to add another parameter to BAPI and use it instead. This one seems little technically complicated because the BAPI itself calls tons of other programs (including CO48) to create Prod. Orders so the right place to insert the numbers might be difficult.
    Any clues how to solve this problem would be appreciated..
    Thank you

    Hi,
    REM manufacturing is simpler way to book the production.
    What is needed for REM is first question.
    1) REM profile
    2) Material on REM with this profile and REM tick
    3) Have normal BOM and routings/ rate routings and work center
    4) Define Production Version
    5) Define Product Cost Collector on which all costs are booked whenever you do your confirmation thro MFBF
    Having defined these master, once you run MRP you get planned order of PE type. It was earlier also callled as RS i.e Run Schedule.
    By using MFBF, backflushing transaction can book the production. REM is period based type of production booking unlike discrete where you make a production order of particular material for some dates, it is lot based production booking.
    Hope it is clear.
    Srini

  • Create production order from sales orders

    Hello,
    I am looking for some detailed documentation in order to make customizing in sales module. The aim is to create production orders from sales orders..
    Thanks  for your help

    See the following link from SAP help online:
    > http://help.sap.com/saphelp_47x200/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
    It contains lots of useful information on Make-To-Order Production.
    I hope this helps.
    Gerard

  • Error:conversion of PPDS order from SNP order-error /sapapo/rrp_heur45

    Hi,
    I am converting a snp planned order from ppds order in transaction /sapapo/rrp_sap2ppds and using heuristic sap_pp_002.But it is canceling the heuristic and giving above error message.I have given 60days ppds horizon and 61days snp horizon.lot size:lot-for-lot.Please suggest what to do?
    Thanks&regards
    venkadesh

    Hello ,
    The hueristics sap_pp_002 you are using is based on algorithm "planning of std. lots".
    For converting Supply Network Planning (SNP) orders or Capable-to-Match(CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders, try to  use a heuristic based on the algorithm /SAPAPO/HEU_SNP_CONVERT, such as the standard heuristic SAP_SNP_SNGL..
    I think the above mentioned hueristics should be able to solve the problem .
    Also for more information refer to below link.
    http://help.sap.com/saphelp_scm2007/helpdata/en/8a/475c3c3906b106e10000000a11402f/frameset.htm
    Thanks & Regards
    Abhijit S Nakhwa

  • Production order from sales order

    Hi experts,
    I have created production order from sales order through t-code co07, there it shows error "Sales order has no CO object" like this.. how to resolve this.
    Thanks

    Hi,
    KA01 configuration is must for CO object And OKB9 config where we configured the Cost Element to Cost Center basing on the profit center as we have the Automatic Acct Assignment.
    Please try and come back.
    Regards,
    R.Brahmankar

  • Purchase Order from Production order

    Hi,
    This purchase order is created directly from production order.( My problem is the material number is no where shown on PO. but when I print it (print preview) i can see the material number along with the Production order number. I am writing a new report and need material no.
    Interesting thing is, even when the Material no is missing. I can see the short txt for material as 'Galvanise'.
    Pls help me in finding the material number.(item wise)
    Thanks & Regards
    Hrishi

    Hello
    To optimize the workflows, you can change certain functions of the standard material master by using customer exits.
    You can tailor the display of the material number to your requirements by using the SAP enhancement MGA00003. If, for example, a material has the number 123, you can use this enhancement to determine that the material number is to be displayed with a prefix such as MAT-. (The number 123 is still saved in the database.)
    Control for the material number assignment
    MGA00002
    EXIT_SAPLMG02_001
    (Internal number assignment)
    EXIT_SAPLMG02_002
    (External number assignment)
    Control for the material number display
    -{}-MGA00003
    EXIT_SAPLOMCV_001
    (Number conversion from display format to database format (input: start))
    EXIT_SAPLOMCV_002
    (Number conversion from display format to database format (input: end))
    EXIT_SAPLOMCV_901
    (Number conversion from display format to database format (input: start))
    EXIT_SAPLOMCV_902
    (Number conversion from display format to database format (input: end))
    Regards

  • Purchase order from production order !!  (Missing material no)

    Hi,
    This purchase order is created directly from production order.( My problem is the material number is no where shown on PO. but when I print it (print preview) i can see the material number along with the Production order number. I am writing a new report and need material no.
    Interesting thing is, even when the Material no is missing. I can see the short txt for material as 'Galvanise'.
    Pls help me in finding the material number.(item wise)
    Thanks & Regards
    Hrishi

    Hi
    1. Check table EKPO, if material number is stored against said PO,
    2. Check ME23N, ME23N, ME22, ME23 screens are u able to see material no. in any of T-code.
    If one of T-code not showing material number, it is sort of bug in system
    Regards,
    NNK
    PS:Award points for useful ans

  • How to find the Purchase Orders from Sales Order number

    Hi ...
    Is there a way to write a query to find the Purchase orders
    from the Sales Order number ....
    I have notice the table POR9 (Purchase Order - base Document)
    but it seems to be empty.
    Could you please help me to figure this out,
    Thank you very much
    Kind Regards
    Sanjaya

    hi,
                 u did mistake in selecting the table
    SELECT T0.DocNum FROM ORDR T0                 for  sales order
    SELECT T0.DocNum FROM OPOR T0                 for purchase order
    how to find the table in SAP B1.
    go to above menu view => system information. tick it(or select it)
    then below status bar u can see the table and field name.
    open the required form and just keep the  mouse cursor  on any field.
    you can see the table and field name below.
    hope now u can able to track the table name.
    regards
    sandip

  • No update of sales order from purchase order

    Hi,
    When I am trying to change the delivery date of a purchase order line item, I get the error
    "No update of sales order xxxxx from purchase order (error V1 348)" How can I resolve this?
    Sincerely,
    Ketan

    Hi,
    Check whether this PO is created w.r.t. PR and PR is created automatically during Sales order creation.
    If it is so then need no to change the delivery date in PO, it will always get updated as per the Schedule Line date of sales order.
    You can go for GR w.r.t. PO directly.

  • Create purchasing requisition or purchase order from service order

    Hello experts,
    we are facing the following problem:
    We are implementing Customer Service module and out of the notification we create a service order. In the service order (components tab) the technician declares the spare parts he has to order from the vendor. We do not keep stock of the spare parts so all of them have to be ordered from the vendors.
    We have managed so far to create a reservation for the stock material and a purchase requisition for the non-stock materials of the service order according to the standard sap documentation. What we need is to create a purchase requisition or a purchase order for the stock items using standard logic.
    Thanks
    George

    Hi
    Please follow the steps it will solve your scenario
    Steps involved in Service PO:
    1.Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
    2.Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
    Without Validation, Acct. Category Reference & Service Category Description.
    3.Define Number Ranges for Service Category.
    4. Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
          Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.
    5.Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
    6.Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
    7.Then do MIRO from PO reference u2013 Service Entry sheet.
    8.Collective Release of Service Entry Sheet u2013 ML85
    Thanks & Regards,
    Mani

Maybe you are looking for

  • Help Needed REP-1800 Formatter error VGS-1701 Not enough memory

    Hi. Gents Help needed I'm working on a Report, it gets some 2 million records and the report pages are approximately 52,000 It works fine if the pages are lesser then 48,000 or the data is less let say one and half a million, the problem occurs only

  • Can't drop components on new page after upgrading to Update 5

    Please need some help. Today I upgraded to Update5. I created a new page in an elder project, created with the prev version. When trying to drop a component on the Designer a got following error-message: You cannot drop components on plan HTML docume

  • [bumblebee] Failed to load module "nouveau" (module does not exist, 0)

    Hello my friends, bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ... # lspci 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corp

  • Blocks behaving differently.

    Hi, DB 9.2.0.1. I am running the following anonymous block, but it's not executing the way, it should. Like I am assigning create table privililege by executing this block , according to me it should executed, but when I run this, the control takes i

  • Firewire out.....

    I have just lost firewire on my FW800 G4 Dual 1.42Ghz (ultimate) my firewire canon scanner isn't being seen, my ipod is charging by not mounting, in system profiler when i go to look at firewire it just comes up with firewire bus. I have tried resett