To remove the stock from WIP area when confirmation was cancelled.

Hi Gurus,
How can we remove the stock that was commited , from the WIP area when we cancel the confirmation.
Plz help me..
Thank you.

Let me understand your problem as followed ..
You have created an order and did GR.. (For that order you would have done GI in 261)
Now you have cancelled the confirmation...
GR also is cancelled( Reversed).The result is the material which you did GR is now at you..i.e WIP
Your problem is now you should not have materials in WIP..
for that you have to do 262..Reversal of GI.. Then only the materials that the order contains will be removed... That is what we call as WIP...
Hope you are clear..
karthick

Similar Messages

  • How to Remove the Stock from 916

    Hi All,
    I have a few questions Related to WM.
    1. Our End users are able to do the PGI Without Confirming the Transfer Order. Once they Do the PGI.After doing the Billing they are coming abck and saying that the stock shud not Present in 916.
    Would you please let me know how can I clear the stock from storage type 916 and the bin created with Delivery number.
    Is there any Possibility to Remove the stock from 916......?
    Waiting for your Response .............
    Sai Kumar

    Hi
    What our friend is saying is that in the config for item categories for deliveries if you set this flag it means that the PGI wont happen unless the TO creation and confirmation are both at status 'C'
    Also ABAP techie
    I see  we asking for points again, what are you going to do with them when you get them?
    I dont think that this is the point of this Forum!!
    Regards
    Frenchy

  • How to remove the stock from 916 -storage type

    Hi experts,
    In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
    How to remove the stock?
    Regards
    vr

    the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
    if the delivery is already goods issued, then you have to use LT01 to move the quants.
    The positive quant of 30 quantity can be moved to the place where it phyiscally is.
    the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse.  so you move from this bin to 916.

  • How can i remove the icloud from my iphone when i don't have the password?

    I have a new iPhone where I restored from an old iPhone. The old iPhone had an iCloud account I hadn't used and I don't know the password. How can I remove the old iCloud account from my new iPhone? It keeps asking for the old password I don't have.

    You won't be able to delted the existing account without the password.  If you don't know it, you'll have to reset it as explained here: http://support.apple.com/kb/PH2617.  If you have trouble doing this, you can try contacting the Apple account security team for your country for assistance: http://support.apple.com/kb/HT5699.  You will have to prove your identity before they will reset the password.

  • ITunes on my phone is no longer playing some songs, even those I have purchased with my phone.  They will play fine on my pc itunes.  I also cannot remove the audio books that are on my phone and add others and the audio books on my phone will not play.

    I am unable to play new songs purchased on my phone and some old songs on my ipod/iphone.  They all work fine in iTunes on my computer.  I also cannot remove the audiobooks from my phone when I sync even though I have unchecked said books, and I cannot play them either.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • How to remove the "0" from the sum cell when the other cells are empty?

    Hello!
    When I use the formula to sum the values from a few cells, there is a zero in the sum cell when the other cells are empty.
    My question concerns how to remove the 0 from the sum cell when the cells that will be summed are empty.
    Thank you!
    /Johan Strömbeck

    Hi,
    Please try the Mr. Laurence's suggestion first. Then, we may try the other workarounds.
    1) Go to Excel option> Advanced>Display Option for this worksheet> Uncheck Show a zero in cells that have zero value
    2) Go to Conditional Formatting>New Rule>Format only cells that contain> Value equal to 0> Format the color with white
    Hope it's helpful.
    Regards,
    George Zhao
    TechNet Community Support

  • [svn] 4901: Only remove the children from the textFlow when they are going to be immediately replaced .

    Revision: 4901
    Author: [email protected]
    Date: 2009-02-09 09:27:39 -0800 (Mon, 09 Feb 2009)
    Log Message:
    Only remove the children from the textFlow when they are going to be immediately replaced. Side effect from SDK-18880.
    QE Notes:
    Doc Notes:
    Bugs: SDK-19177
    Reviewers: Gordon
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18880
    http://bugs.adobe.com/jira/browse/SDK-19177
    Modified Paths:
    flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/graphics/TextGraphic.as

    This is a problem of overall design.  It is not a scripting issue.
    NET USE wil only delete the drive you tell it to delete.  You will need to know in advance which drive that is.  There is no magic in WIndows.  YOu must tel it everything.
    Bill suggests GPP which is very easy to use and very flexible.  It avoids learning how to write scripts and understand much of Windows.  Just set the values and they do allof this for you.  There are checkboxes for most issues.
    Most of us have not mapped drives since shortly after the release of Vista many years ago.  Save your self a lot of headaches and use the tools that were built to do this/
    ¯\_(ツ)_/¯

  • HT4191 How do I get to "When prompted, select Delete Notes to remove the duplicates from the device."?  I can't get to this!

    I have duplicate Notes on my iphone 4 (upgraded to iOS 5.1.1)  I have followed your instructions to remove the duplicates.  How do I get "select Detete Notes" to appear on my Mac?  I have connected my phone to my Mac and selected it in iTunes.  I clicked the Info pane and deselected the option to Sync Notes.  THEN WHAT should I do?  How do I get the prompt "Select Delete Notes to remove the duplicates from the device.  (I do want to sync them using the over-the-air feature.)

    I would try the following:
    First sync your phone with iTunes to create a new backup (just in case).  When done, disconnect your phone from your computer.
    Next be sure that all of your Notes are on your mac (Don't proceed any further if they aren't).  If so, turn off iCloud syncing for Notes on your phone go to Settings>iCloud and turning Notes to Off.  When prompted choose to delete the notes from your phone.
    Next, without connecting your phone to your computer, open iTunes and go to iTunes>Preferences, on the Devices tab check "Prevent...from syncing automatically".
    Now connect your phone to your computer, click on the name of your phone when it appears in iTunes on the left sidebar.
    Go to the Info tab and under Other check Sync Notes, then further down under Advanced: Replace information on this iPhone, check Notes.
    Click Apply at the bottom right to sync your phone.  This should sync the Notes from your mac to your phone and you should no longer have duplicate Notes.
    Next, on the Info tab uncheck Sync Notes and click Apply, when prompted select to keep the Notes on your phone (haven't tested this step but I believe you will be given the option to keep them on your phone).
    Now disconnect your phone from your computer and check the Notes on your phone to confirm that they are still there and that you don't have any duplicates.
    Next turn on iCloud syncing on your phone again by going to Settings>iCloud and turning Notes to On.
    On your computer, without connecting your phone, go back to iTunes>Preferences>Devices and uncheck "Prevent…from syncing automatically" to re-enable automatic syncing.
    That should do it.

  • I have a Kindle and the new iPad 3.  I downloaded one of my Kindle books to my iPad.  Now I want to remove the book from the iPad.  When I highlight the book, the "device" key that I think I am supposed to use disappears.  Please help.

    I have a Kindle and the new iPad 3.  I downloaded one of my Kindle books to my iPad.  Now I want to remove the book from my iPad.  When I highlight the book, the "device" button (which I think I am supposed to use) disappears.  How do I get the select the book and get it off the iPad and back to my Kindle?  Thanks for your help.

    To remove the book simply touch and hold the cover on the main page.  A little pop up will ask, remove?  Say yes.  The book content will de deleted.   The cover will remain on your main page with a little down arrow so that you can redownload it if you wan in the cloud view.  In the device view, it simply disappears.
    Note at the bottom of the page are a couple of switches, labeled cloun and device.  The device switch shows you books on your device.  The cloud page shows your whole catalog, and the down arrow allows you to bring down anything in your catalog to the device.

  • HT4914 if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded t

    if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded to iTunes match?

    Welcome to the Apple Community.
    iTunes match won't automatically remove content from your computer, if you want to do that you will need to do it manually yourself.

  • I would like to remove the icons that came preloaded when I did the update for ios7. The Disney, yahoo, Espn etc. these icons aren't in my bookmarks so how do I remove them from my safari home screen?

    I would like to remove the icons that came preloaded when I did the update for ios7. The Disney, yahoo, Espn etc. these icons aren't in my bookmarks so how do I remove them from my safari home screen? Can anyone help?

    I am trying to figure this out as well. It is really frustrating. I wish I could go back to iOS 6 this *****

  • How to remove the square from the icons when selecting them?

    How to remove the square from the icons when selecting them?

    hi jerry not quite sure what you mean, could you elaborate abit more please. lori

  • My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why?  Removing the image from that page bright RGB colors are back.. hmm

    My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why? 
    Removing the image from that page bright RGB colors are back.. hmm

    Edit > Transparency Blend Space > Document RGB

  • IPone 6, iOs 8.1.2 when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    Addendum
    Last night charging for around 3-4 hours only charged a dead phone by 55% then left it to charge overnight
    Today the battery dropped from 6:15 am full charge to 53% at 10:38 am at time of writing this with
    1 phone call out for 30 secs
    1 incoming missed call,
    Whatsapp fetched around 10 msgs
    Email fetched around 20 ermail from 4 accounts but not viewed yet on phone

  • When I trash e-mails I have received on the iPad from Outlook, are the messages also deleted from the Outlook server?al

    When I trash e-mails I have received on the iPad from Outlook, are the e-mails also deleted from the Outlook server at the same time?

    Hello falconrig,
    It sounds like you have some questions about how your email account stores your information. This article has some information about different email account types and how they work:
    Mail (Mavericks): About email accounts
    http://support.apple.com/kb/PH14873
    IMAP accounts
    With IMAP accounts, incoming and outgoing messages are stored on a mail server until you delete them. When your account connects to the server, it’s synced so that the messages on your Mac are the same as those on the server. You can read and manage messages from any device that you use to access your account, and download messages or attachments to work with when you’re not connected to the Internet.
    Microsoft Exchange accounts
    These accounts are similar to IMAP accounts, in that messages are stored on a mail server and accessible from different computers and locations. You can use flags in an Exchange account with some limitations.
    For an Exchange account to be set up in Mail, the Exchange server must support Exchange Web Services (EWS). Contact your server administrator for more information.
    POP accounts
    With POP accounts, incoming messages are stored on a mail server and are downloaded to your Mac when you access your account. The messages remain on the server until they’re deleted from the server.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

Maybe you are looking for

  • SMARTFORMS printing is shifted to the right

    We are having a problem with a SMARTFORMS for 1099 called IDWTCERT_US_1099MISC. We noticed that the print preview after testing the 1099 and the print preview from the SPOOL (trx SP01) shows the 1099 form OK, but printing it out cuts off the right si

  • Blanket PO - Actual Value Calculation

    Hi All, Can anybody tell me how the actual value is calculated for each line item in Blanket PO.(In Limit tab you can able to find Overall Limit, Expected Value and Actual Value.) Thanks and regards, Senthil.B

  • Report:  rfbila00

    hello All, I am working on Report : rfbila00, balance sheet/profit lost statement. It is working fine. But in the output the percentage field is not getting populated. Can anyone tell me what may be the reson and what needs to be done. Thank You, Reg

  • Map Viewer new release?

    Hi, can it be known when will a new release of Map Viwer be available? The current developer preview's map definition tool is prettz instable. It would be also nice to know in what direction is this product heading. Thanks in advance. Regards, Tamas

  • Increase SGA on 8i

    Can someone please guide me on how to increase the SGA size on 8i? It srunning on a Windows 2003 Server. I know how to do it on 9i via Enterprise Manager but that feature is not available in 8i. Anyone?