To upload a data into SAP Table with the help of RFC function in BODS

Hi,
Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
but it did not help me.
Thanks,
Abhishek

Hi Abhishek,
Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
I hope this helps.
Jan.

Similar Messages

Upload excel data into Internal table

Hi,
I'm trying to upload excel data into internal table, well the excel file layout will be different on each run of the report.
Excel file will have 60 columns and 500 record limit. I can upload the excel data using 'ALSM_EXCEL_TO_INTERNAL_TABLE' and 'KCD_EXCEL_OLE_TO_INT_CONVERT' but the output table is generates 60 lines for each record i.e.., 60 * 500 = 30,000 which could cause performance.
I try with the FM 'TEXT_CONVERT_XLS_TO_SAP', but this will only work if the file structure is static. It didn't work for dynamic file layout. Even GUI_UPLOAD doesn't work to upload excel file, it will work if I convert the file to Tab delimited file.
Please advise if you know any alternate procedure to upload excel data into internal table.
Thanks,
Kumar.

Moderator message - Cross post locked
Rob

How to convert the flat file data into sap tables . ?

how to upload flat file data into sap table . before upload mapping is also there in some filds . any one can give me some steps how to upload and mapping . ?

Hi
See the sample code
REPORT zmmupload.
Internal Table for Upload Data
DATA: i_mara like MARA occurs 0 with header line
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
    TABLES
      data_tab                = i_mara
    EXCEPTIONS
      conversion_error        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      OTHERS                  = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Upload the Data from Internal Table
MODIFY MARA from TABLE i_MARA.
Regards
Anji.

Upload bulk data into sap?

hi all,
let me know is there any methods to upload bulk data into sap and can same data be modified , delete , add. please correct me if i am wrong. what i know is that we can do with lsmw method, as i am new to lsmw method please let me know where to hunt for lsmw documentation.
thanks,
john dias.

Hi John-
According to SAP, The Data Transfer Workbench supports the automatic transfer of data into the system. The Workbench is particularly useful for various business objects with large amounts of data. It guarantees that data is transferred efficiently and ensures that data in the system is consistent.
Further, The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
For your purpose you might be helped by the following two links-
'Data Transfer Workbench' - http://help.sap.com/saphelp_47x200/helpdata/en/0d/e211c5543e11d1895d0000e829fbbd/frameset.htm
'Using the LSM Workbench for the Conversion' - http://help.sap.com/saphelp_46c/helpdata/en/0f/4829e3d30911d3a6e30060087832f8/frameset.htm
Hope these links help,
- Vik.

Upload legacy data into SAP

Hi experts,
I have to upload legacy data into SAP by using eCATT recording Transaction. For doing this I have completed Test script in tcode SECATT. After this what I have to do.. How can I attach my legacy file.. Can anyone help me. ..Its really urgent
Thanks in advance

Hi,
There are a series of weblogs in this area. Check them out, I think there are 8 in a series:
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
cheers
Aveek

How to batch upload some data into SAP system?

Hi All:
I'm a SAP key user in our company, I want to know how to batch upload master data into SAP system? What t-code we can use for batch input?
Thanks in advance!

Hi,
I think at least there are four methods for batch input which you can use in SAP system:
Standard mass change t-code: for example, MM17 for mass change of material master data, you can find the mass change t-code under the relevant function module;
T-code SCAT, you can use to record and generate the simple batch input template, it's easy to use for key user;
T-code LSMW, it's another transaction to generate batch input template, it's often used at the beginning of SAP rollout;
ABAP program, of course, ABAP is a universal tool for everything, you can use ABAP to generate a batch input program to upload data into SAP system as well.
So you had better contact your SAP support department, help you to upload data!
Good luck
Tao

Mass upload of data into Custom table

Hello all,
            I made search in SDN and could not find the best solution to my problem and hence posting .
           What is the best way for Mass upload of data into Custom database table ?
           I think LSMW would not be a viable option as it would take longer time .
           Locking of the table also needs to be taken care.
           PLease let me know if you have a alternative to this and the best way to do this .
Comradely,
K.Sibi

Hi Sibi,
See Lock objects are required when we enter the data through screen level, or multiple users should not enter the data at same time.
Create one Lock object in SE11, It automatically creates FM.
DEQUEUE_EYTEST2                Release lock on object EYTEST2
ENQUEUE_EYTEST2                Request lock for object EYTEST2
Call these FM in your program.
EX: Refer this links
1 http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4c8a79e11d1950f0000e82de14a/content.htm
2 http://wiki.sdn.sap.com/wiki/display/Snippets/lockingandunlockingofthe+tables
Rgds
Aeda

How to input data into a table with columns?

I am trying to input data into a table. My table have 5 columns and an unlimited amount of rows. I created a program in LabView that enters the data into the table but it enters all of the data in one row. I would like to enter the first set of information into the first column, the second set of info into the second column and so on. I am including a copy of the program that I am working with. I would like the number of runs to be put into the first column (it should count down like number 5 in first row, number 4 in second row, number 3 in third row, and so on). I would like the applied voltage to be placed in the second column, and so on. Any help or information will be greatly appreciated. I am working with LabView Version 6.1 and 8.0. I am submitting the vi from 6.1.
Attachments:
FJ-PROGRAM.vi ‏68 KB

Pondered,
I looked at your code and I think you might be making things too complicated. I've included a very simple example that demonstrates how to write a 2D array of integers to a table. Hope you find this helpful. It is in LV 7.1.
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect
Attachments:
rows - columns.vi ‏17 KB

How do I upload XML files into sap table?

Dear all,
I found some methods that upload xml into SAP,
but there doesnt work under 4.6c.
Can someone tell me how to upload XML files into
sap under 4.6c?
THX!

hi,
You can convert XML to abap using transformations. Simple transformations is a proprietary SAP programming language that describes the transformation of ABAP data to XML (serialization) and from XML to ABAP data (deserialization).
goto SE80->workbench->edit object(or other objects)->in object selection chose more tab and then choose the transformation radio button and write a name and click create new.
Here you enter your transformation like
<xsl:transform version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:sap="http://www.sap.com/sapxsl"
>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
<xsl:copy-of select="."/>
</xsl:template>
</xsl:transform>
You can use this transfomation in your program using call transformation. You can find more info on call transformation in help.
Hope this helps.
Regards,
Richa

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Updating DB tables with the help of VC

Hello all,
I'm interested in building input forms and saving the data in the portal.
I mean, that we are building DB tables in the portal and then, I'm going to build forms for data input/update for the users. Can I implement VC for this purpose?
I know that VC is perfect for all type of outputs and, also, for connection to R3 functions, but I need something else. I need to store the data in DB tables in the portal. Is it possible to do it with VC?
Regards,
Inna

Hello Inna,
Your first question was.
"I'm going to build forms for data input/update for the users. Can I implement VC for this purpose?"
The answer is yes you can in the Visual Composer create forms that allow you to input data and update information. There is an excellent How To regarding this:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/2bd0e7bf-0201-0010-babb-bf5a28080184
Your second question:
"I know that VC is perfect for all type of outputs and, also, for connection to R3 functions, but I need something else. I need to store the data in DB tables in the portal. Is it possible to do it with VC?"
By this I assume you wish to persist data in the portal itself? Is that correct? If this is correct, Visual Composer currently does not provide a way to persist data within the Enterprise Portal to my understanding.
I hope this helps.
Cheers,
Scott

Getting all types of files with the help of get_file_name function

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
i have used get_file_name function to the file name of all type of files
but i am able to get only the folders when i tried like below
:FILE_NAME := GET_FILE_NAME(NULL,NULL,NULL,'Choose a Directory',OPEN_FILE,FALSE);my requirement to get all types of files on the window(user will selects whichever way he wants)
Can i acheive it through get_file_name or i have to go for any alternative to get the file list, so that user can select by browsing the folders.
Please help.
Thanks..

hi,
in my code the select file was set to false(so showing only the directories) now i have set it to 'true'. its showing the files now.
with the help of my above shown code i can get the full path of the file.
is there any way to get only the file name?(other than the last occurance of '/' logic or that is only the way?)
Please help.
Thanks..

Bdc upload file data into internal table problem with gui_upload fm

Hello experts,
my coding is like this ..
data : begin of itab occurs 0 .
field1 like mara-matnr,
field2......
etc,
end of itab.
data: file1 type string.
parameter :file like rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
mask = space
field_name = 'FILE'
CHANGING
file_name = file.
START-OF-SELECTION.
FILE1 = FILE . "HERE I AM PASSING INTO STRING
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = FILE1
FILETYPE = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab. " here the data is not populating from the file , it is giving the error like speified table not found.
HERE i am getting the message like "specified table name not recgonised" . the data is not populating into the itab from the file.
file structure is same as the internal table.
I stored the file as .txt( ie in notepad).
my file is like this..
10000 200 323 sunndarrr.......
i had a problem with this bdc , i am getting like "specified table name not recgonised" in the fm gui_upload while debugging.
when i am using the ws_upload it is working fine.
please guide me where i have done the mistake.
thank you so much for all the replies.

Hi,
Have a look on the following code.
TABLES: kna1.
DATA: BEGIN OF itab1 OCCURS 0,
      str(255),
      END OF itab1.
DATA: itab2 TYPE kna1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
    filename                = 'D:\ABAP EVE\ffile1.txt'
    filetype                = 'ASC'
TABLES
    data_tab                = itab1
EXCEPTIONS
    conversion_error        = 1
    file_open_error         = 2
    file_read_error         = 3
    invalid_type            = 4
    no_batch                = 5
    unknown_error           = 6
    invalid_table_width     = 7
    gui_refuse_filetransfer = 8
    customer_error          = 9
    no_authority            = 10
    OTHERS                  = 11.
IF sy-subrc <> 0.
WRITE:/ 'sorry'.
ELSE.
LOOP AT itab1.
    SPLIT itab1-str AT ',' INTO itab2-kunnr itab2-name1.
    APPEND itab2.
ENDLOOP.
IF sy-subrc = 0.
    LOOP AT itab2.
      WRITE:/ itab2-kunnr,itab2-name1.
      INSERT INTO kna1 VALUES itab2.
    ENDLOOP.
    IF sy-subrc = 0.
      WRITE:/ 'inserted'.
    ELSE.
      WRITE:/ 'not inserted'.
    ENDIF.
ELSE.
    WRITE:/ 'fail'.
ENDIF.
ENDIF.
Flat file:
10001,Sadney
10003,Yogesh
20005,Madan
1.U need to define internal table with one field of max size
2.upload the flat file data into that internal table
3.split that internal table data into another internal table(having fields)
<REMOVED BY MODERATOR>
thanks,
Chandu
Edited by: Alvaro Tejada Galindo on Apr 30, 2008 12:17 PM

Regarding Upload of data into SAP from Application server using DATA SETS

Hi all,
I have a problem when uploading data that is application server [.txt file] into SAP using OPEN DATA SET,READ DATA SET & CLOSE DATA SET it is now going to dump. The file is actually splits the fields by using Tab Delimiter.
During uploading some junk values are coming with '#' so it going to dump and giving follow type of error.
Runtime Errors         CONVT_NO_NUMBER
Exception              CX_SY_CONVERSION_NO_NUMBER
Unable to interpret "#0#0#0#0#0#0#0#" as a number.
Can any one solve the above issue as i need it urgently.
Thanks in advance.
Thanks & Regards,
Rayeezuddin.

Hi Hielman,
Thnaks for that reply and for effort you are putting to solve my issue.
I had done the same thing what u have posted prior to your reply but still i am getting dump.
FORM f_get_legacy_data .
DATA: l_tab type xstring,
        l_tab1(1) type c,
        s type x.
move '23' to l_tab.
move l_tab to l_tab1.
OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
   MESSAGE text-207 TYPE c_e.
ELSE.
DO.
    CLEAR wa_input1.
   READ DATASET v_pfile INTO wa_input1.
    READ DATASET v_pfile INTO wa_read.
    IF sy-subrc EQ 0.
      move wa_read to i_txt-txt.
      append i_txt.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
s = '09'.
loop at i_txt.
   move i_txt-txt+10(1) to l_tab1.
   move '#' to l_tab1.
   split i_txt-txt at s into wa_input1-vbeln wa_input1-posnr
    split i_txt-txt at '#' into wa_input1-vbeln wa_input1-posnr
                                   wa_input1-per0bal wa_input1-per1val
                                   wa_input1-per2val wa_input1-per3val
                                   wa_input1-per4val wa_input1-per5val
                                   wa_input1-per6val wa_input1-per7val
                                   wa_input1-per8val wa_input1-per9val
                                   wa_input1-per10val wa_input1-per11val
                                   wa_input1-per12val.
    APPEND wa_input1 TO i_input1.
    CLEAR wa_input1.
endloop.
ENDIF.
CLOSE DATASET v_pfile.
IF i_input1[] IS INITIAL.
If there is no data in the legacy file or if the structure of the
legacy data does not match with that of internal table error message
need to be displayed.
    MESSAGE text-211 TYPE c_e.
*&--begin of change--
ELSE.
    CLEAR: wa_input, wa_input1.
    LOOP AT i_input1 INTO wa_input1.
     MOVE wa_input1 TO wa_input.
      MOVE: wa_input1-vbeln TO wa_input-vbeln,
            wa_input1-posnr TO wa_input-posnr,
            wa_input1-per0bal TO wa_input-per0bal,
            wa_input1-per1val TO wa_input-per1val,
            wa_input1-per2val TO wa_input-per2val,
            wa_input1-per3val TO wa_input-per3val,
            wa_input1-per4val TO wa_input-per4val,
            wa_input1-per5val TO wa_input-per5val,
            wa_input1-per6val TO wa_input-per6val,
            wa_input1-per7val TO wa_input-per7val,
            wa_input1-per8val TO wa_input-per8val,
            wa_input1-per9val TO wa_input-per9val,
            wa_input1-per10val TO wa_input-per10val,
            wa_input1-per11val TO wa_input-per11val,
            wa_input1-per12val TO wa_input-per12val.
      APPEND wa_input TO i_input.
      CLEAR: wa_input, wa_input1.
    ENDLOOP.
ENDIF.
ENDFORM.                    " GET_LEGACY_DATA
When i am giving input as
Directory /pw/data/erp/D5S/fi/up
Name: Backlog1616_D1S.txt
BKCOPO1           BKSOI1        1000.00                100.00                 -200.00                0                      0                      0                      0                      0                      0                      0
BKSOPO2           BKSOI2        2222.22                0                      300                    0                      0                      0                      0                      0                      0                      0
BKSOPO3           BKSOI3        -3000                  400                    0                      0                      0                      0                      0                      0                      0                      0
BKSOPO4                         4000.55                500                    600                    0                      0                      0                      0                      0                      0                      0
0040000000        000010        -100                   -110                   -110                   0                      0                      -600                   0                      0                      0                      0
0040000001        000010        -110                   -110                   0                      0                      0                      -610                   0                      0                      0                      0
I am getting i_input internal table populated as follows at the end of that subroutine.
After appending [APPEND wa_input TO i_input].
BKCOPO1#BK|000000|            0.00 |            0.00 |            0.00    |
BKSOPO2#BK|000000|            0.00 |            0.00 |            0.00    |
BKCOPO3#BK|000000|            0.00 |            0.00 |            0.00    |
BKCOPO4##4|000000|            0.00 |            0.00 |            0.00    |
0040000000|000000|            0.00 |            0.00 |            0.00    |
0040000001|000000|            0.00 |            0.00 |            0.00    |
And output is showing erronious records: 6
No entries inserted.
Can you solve this issue.

Upload excel data into Internal table dynamically

Hi all,
I have a excel file, in this file there are fixed columns but I don't know, at run time, how many rows will come up.
Now I want to fetch the data from file to internal table, I used
GUI_UPLOAD and ALSM_EXCEL_TO_INTERNAL_TABLE.
But it is not working for me.
Please suggest how to get it.
Thanks
Sanket sethi

HI,
go through this code:
Upload data from Excel to internal table.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_pfile
      i_begin_col             = 1
      i_begin_row             = 2
      i_end_col               = 45
      i_end_row               = 8
    TABLES
      intern                  = it_excel
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.                               " IF sy-subrc 0
*Populate data to internal tables and structructures
SORT it_excel BY row col.
LOOP AT it_excel INTO ls_excel.
    CASE ls_excel-col.
      WHEN 1.
        ls_data-doc_type = ls_excel-value.
      WHEN 2.
        ls_data-rec_no = ls_excel-value.
      WHEN 3.
        ls_data-doc_ver = ls_excel-value.
      endcase.
endloop.
Hope it will help you
Thanks and Regards
Rahul Sharma

To upload a data into SAP Table with the help of RFC function in BODS

Similar Messages

Maybe you are looking for