To use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

I'm considering using Apple TV to connect to a projector in a church hall which does not have any internet access. I intend to use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

Welcome to the Apple Community.
Yes, that will be fine providing you don't want to play any protected content.

Similar Messages

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

A tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore)

a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks

Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless.

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

Tried to use my two airport express to extend my wifi network on a windows pc but no success

Tried to use my two airport express to extend my wifi network on a windows pc but no success

My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
The key is to have both AXns configured as follows:
As a bridge.
Each having a unique Base Station Name.
Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

I have an IPAD 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds)

I have an Ipad 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds) The Ipad will eventually connect to the network, but by this time the driver is frustrated. I have moved the antenna to within 20' of where the vehicle comes to a stop. My Iphone does not have a problem connecting or reconnecting when used side by side with the Ipad. Both the Ipad and Iphone have Otter box covers. Has anyone run into this problem or have any suggestions?

30 seconds to reconnect to a WiFi network is not unusual, especially in an environment where other radio signals on similar frequencies are present. Sorry about that.
You might get better times by letting the WiFi base station pick another channel. But you might not.

Using Airport Express to set up an ad hoc network for presentations

I have to give a presentation where I will both need my MacBook Pro and iPad. I may or may not have a wireless network available (will depend on location). Is there a way that I can use an Airport Express to set up an ad hoc network and use an Apple TV for AirPlay from my iPad and laptop?

Easy to do. Just set up the AirPort Express to "Create a wireless network".
When you see the "error" message(s) that there is not an Ethernet cable plugged into the WAN port and/or no Internet connection, click "ignore" and you will have a green light on the Express.
Wireless devices will connect to the network by selecting it and entering the password.

TS2972 I would like to share my iTunes libraries with my Apple TV from both my iMac and Macbook Pro, but I use the same iTunes account on both devices. Is it possible to link my Apple TV to both devices at the same time?

I recently purchased an Apple TV, and I currently have it linked to my iMac with my iTunes account. I also have a newer MacBook Pro that has some different iTunes media on it than my iMac does, but they share iTunes accounts. Is it possible to link both devices at the same time, have access to media on both computers, and use the same iTunes account on both computers?? It seems Apple TV will only link to one iTunes account per computer, but can access multiple computers if different iTunes accounts are activated on those computers.

You can share multiple libraries with the Apple TV, they don't even need to use the same iTunes account. Just make sure that you use the same ID for homesharing on all devices.

TS1398 wifi networks are not shown and can not use wifi in my iPhone 4s since upgrading to iOS 7, any help available to fix this problem

My iphone 4s is not showing the wifi networks after upgrading to ios 7, can not use wifi anymore....any guidance to fix the problem?

You can't downgrade the iOS level.
Try using Settings > General > Reset > Reset Network Settings.

How to authenticate using PEAPv1 (EAP-GTC) to connect to a wifi network in iPad 3?

The iPad in Business deployment senario guide says that we can connect to a wifi network using the PEAPv1 (EAP-GTC).
But when we try to connect it, there is no option to choose that authenticaion method.
Also, when we try to create a profile using iPone Configuration Utility, there is just PEAP available (by default PEAPv0 (EAP-MS-CHAP v2)).
It is very important for me as my organisation allows only PEAPv1 authentication and I'm not able to connect to its wifi network.
Thanking all of in anticipation.

Link for iPad in Business -
http://images.apple.com/ipad/business/pdf/iPad_Deployment_Scenarios.pdf
Link for iPhone Configuration Utility -
http://support.apple.com/kb/DL1466

Can I use Lion server to set-up a WPA2 wireless network in place of an AEBS?

I'm contemplating replacing my Airport Extreme Base Station with my Core i5 Mac mini as the wireless network server, because this will get rid of a "box" (that I can sell!) and reduce power consumption, since my iMac is on all the time as my iTunes media source anyway. At present my AEBS creates a WPA2 LAN network connected in bridge mode to my Billion modem/router, so DHCP serving is performed by the Billion router. I could replace the AEBS with the Mac mini running Lion simply by using internet sharing, but this has low security (WEP) and I understand there are often connection problems when clients awake from sleep. (Furthermore, my Airport Extreme at the back of the house probably wouldn't connect to that WEP network?)
So, I wonder.... If I upgraded to Lion Server (only $49), can I set-up the Mac mini as the WPA2 network host in place of the AEBS? My mini is right next to the AEBS anyway, so it's in a suitable position to distribute the radio signal. As I understand it, the Lion Server software would need to allow the Mac mini to connect to the Billion router via ethernet in bridge mode - just like the AEBs, but I can't find any info that tells me whether this is possible.
Does anyone know if what I want to do is possible? A simple solution may be to turn off the DHCP server functions of my Billion router, letting Lion Server become the DHCP server, but I don't think that's possible. I also don't want to replace the Billion with a simple modem because my Billion router provides VoIP for my home phone (and has done so reliably since 2005).
Of course, if it's all too hard, I'll leave things as they are, because I don't have any need for the other Server functions of Lion Server.
thanks

Hello Chris,
chrisfromnewtwon wrote:
So, I wonder.... If I upgraded to Lion Server (only $49), can I set-up the Mac mini as the WPA2 network host in place of the AEBS?
I don't know. I'm also looking for the same function because I want to
make my iMac running Lion the router and the firewall of my personnal
wireless network. The key advantage will be to have the firewall, its rules
and its logging on the same server.
What I already know is that turning the Internet sharing on turns a
MacOS X Lion into a DHCP server on the wireless side.
dan

I have a ipod, and 2 ipod touch's on my itunes account, my husband just bought a used itouch from his friend. My question is, m adding it to my account I am stuck at "Set Up Your ipod" when it states, "This Computer has been previously synced with an iPod

or another iOs device, which option do I choose? *Set up as a new iPod or *Restore from the backup of (myself or son's itouch) I have done this before but cannot remember what I did and I do not want to lose what I have.

Thanks, I want his to be his own so I can manually put what apps and songs on it without all the ones I have. So I chose the 2nd option you said. I Know that when I open itunes i hold down the shift key and choose which ipod I want to use. Thank-you for your help!

HT1695 i bought a used ipod touch and reset it to the factory settings via itunes and now i'm trying to set it up like new and it won't let me sign in with an apple id it says it can't connect to the server. Other wireless devices are working HELP?!

I am trying to set up my daughters ipod touch after resetting it to factory settings. So I am trying to sign in using an apple id. It says won't connect to the servier, but I have other wireless devices connected, so I know my wi fi is working. What now? Thanks

Return it and get a refund. Without the prior owner's Apple ID and password that device is useless. Find My iPhone Activation Lock- Removing a device from a previous owner’s account. You were screwed by the ignorance of the pawn shop owner.
<Edited by Host>

Two different site collection cannot use the same Term Set . Is there any solution for this ?

I can save department site collection as site collection template. Also I can use this template for a new department site collection creation.
But Managed Meta data Navigation throws the following error
•Error loading navigation: The Managed Navigation term set is improperly attached to the site. (Correlation ID: 6fa6b19c-820a-001d-b9e0-d939d702050a)

Hi ,
this is a limitation. please refer this
http://social.technet.microsoft.com/forums/sharepoint/en-US/029b7e2e-661f-4ac3-bfcb-eb99b43016f2/the-selected-term-set-is-already-used-by-another-site
Unfortunately in SP 2013, a termset can only be used by a single site collection for navigation. This is a known limitation. There is no out of the box way to use a central termset to manage navigation across site collections. You need to develop a custom sitemap
provider to do that.
Another way to do this is to create termset for each site collection and reuse/pin the terms from the central termset instead of creating duplicate terms. You can script this easily using Powershell. This has some limitations though.
Also, you can try little customization. Follow this link -
http://www.mavention.com/blog/building-global-naviga
Please remember to click 'Mark as Answer' on the answer if it helps you

All my recent downloaded programs are in Chinese. Is there a setting in Firefox that I can undo this problem? I'm using English GB.

All my recent downloaded programs are in Chinese. Is there any ways I can undo this problem? I using Firefox English GB.
== This happened ==
A few times a week
== A month ago

Hi B.
First of all, and although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment as been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com www.getfirefox.com].
As for your problem, you may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

To use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

Similar Messages

Maybe you are looking for