To use Web Application Designer release 2004s do we need to have portals???

Hi
I would like some clarity regarding whther we need a portal or not.
If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
"Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
Thanks in advance

YOu neeed BI Java configured
If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
For more insights - FAQ
Pls read carefuly should answer all your current and future questions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Similar Messages

  • Security for creating web templates using web application designer

    I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
    The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
    Any help would be greatly appreciated.
    Jeff Ehritt
    925 827-6012
    ChevronTexaco

    Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
    The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
    Thanks,
    Jeff Ehritt
    ERP COE SAP BW Security

  • What GUI to use web application designer in BI 7.0 without support package

    I use BI in my ECC 6.0 system.
    I use tried both GUI 7.1 and GUI 6.40 to logon web application designer.
    But system display the message please logon to a Netweaver BI 7.x system. System A11 does not have a mimumium version required 7007.
    My system seems to be 7000, so what GUI is suitable to use for WAD?
    Thanks
    Giang

    Hi,
    It could be problem with either Support package which you are using for BI or Front end patch which you need to install for GUI.
    please check with minimal installations and let me know with current support package and FEP you are using.
    Regards
    Suresh

  • BW Application Error while using Web Application Designer Functionality?

    Hi,
    An error came while using Web Aplication Designer functionality.
    Can anyone please help me to resolve this issue.
    X person Developed a web template, but when Y person attempted to broadcast the associated query result, an error message returned indicating access was denied: <b>part of error message Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI.</b>
    <b>The same X person developed a web template, but when he attempted to broadcast the associated query result, an error message was returned indicating access was denied.</b>
    From these test results it appears as though the errors encountered are authorization related.  It is a requirement that web templates developed by X to be broadcasted. 
    I need to understand what permissions the X person requires in order for this to work so that his access can be changed.
    Waiting for response.
    Thanks & Regards.

    The last two days have been frustrating. The error above also appeared when I was trying to view one of the relationships in one of my entities.
    What seems to have been happening is Designer showed a relationship existing after it had been deleted. This seems to be a bug in Designer. These rouge links can be deleted in the RON (although if you try to look at their details the RON will crash with the error in original query). After this cleanup everything worked like clockwork.
    Hannah Fraser

  • Problems with planning function in Web Application Designer in 2004s

    Hi All,
    I have a problem in WAD 2004s with planning function. I created a web template that includes a query. It runs on the enterprise portal, and I can edit this query. The problem is: I don't know how to save this edited query, because when I use the button with function save, the new value doesn't appear in the relevant info cube.
    Anybody can help me how to save the new values to the info cube?
    Thanks in advance
    Dezso Toth

    I don't know if you ever resolved this, but you may just ned to change a setting on your query properties.  When data is entered into planning layouts and saved, that data is put into a "yellow" request in the underlying infocube. 
    Until the necessary volume of data is posted which causes this to change to "green", it remains yellow.  Note that this request could also be changed to green several ways.  i.e. manually, by flipping the "real-time infocube behavior" switch, etc. 
    Anyway, as long as it "yellow" your query, by default will not consider it, unless you change it's properties to tell it to consider "yellow" requests.  This can be done via RSRT and pressing the "properties" button.  Choose request status "2" and your problem should be solved

  • Exceptions not displayed using Web Application Designer

    Hi there,
    I've got a query including a simple exception. If I execute these query out of the query designer (in the web) or in the BEx Analyzer the exception is displeyd as defined. (red, green, yellow...)
    Do I use these query as DataProvider in a Web Template (Analysis Item -> Exceptions displayer as color) the exceptions are not shown. Does anybody have an idea?
    Thanks a lot in advance
    Mark

    If you need to use Exception in Web, you will have to open the query in the Web Analyzer and create an exception in the Web Analyzer in the Settings.
    Check it out.
    Regards,
    Vikram

  • Can not open or save web template using web application designer

    as the subject .
    when i create a template , everything is ok .but when i want to save the template i get two  errors
    the fist one:
    type: stop
    message class  :rsbolap
    message number: 017
    description: Java communication error: an unknown error occured during portal communication .
    the second one:
    type: stop
    message class  :rsbolap
    message number: 017
    description: Java communication error: error when opening rfc connection.
    then i click them to get the detail ,and get the same content:
    Diagnosis
    An error occurred during communication with the BI components on the SAP J2EE Engine.
    System Response
    Procedure
    Contact your system administrator to have the error analyzed in detail.
    Procedure for System Administration
    SAP Note 888687 provides detailed instructions on analyzing communication and log-on problems.
    So i check the note 888687 ,and do as it .but it does not get work.
    we  change the following locations to the "ALL" severity to receive more exact information:
    com.sap.ip.bi.webapplications
    com.sap.portal.connectors.BW
    com.sap.portal.ivs.semantic.systemLandscape
    com.sap.portal.ivs.systemConnectionTests
    com.sap.security.api.saml
    com.sap.security.core.server.jaas
    com.sap.security.core.server.saml
    com.sap.security.core.session
    com.sap.security.core.ticket
    com.sap.security.core.umap
    com.sap.security.core.util
    by the way we install the bi7.0 and portal7.0  in the same machine and share the same the instance.
    what should i do ?

    Hi I've got the same problem. When trying to use the Bex Report Designer I get this error message: "Java communication error: RFC destination not_configured does not exist". Error when loading query metadata. Check query and portal settings.
    Can anybody help me to solve this problem?
    Thanks in advance!

  • Web Application Designer in 2004s has blurry fonts

    Hi
    We are on SP12.  When changing the fonts to bold in the charts, the fonts are blurry.
    Anyone had this problem and solved it?
    Thanks
    Kristen

    Hi Kristen,
    blurry means you have activated the anti-aliasing effect of the texts. This effect is also described in note 1002118. To deactivate it just set the Transparency Color in the global settings of the chart (WAD - Edit Chart Item - Refine - Global Settings) to an RGB value (i.e. not None).
    Please also make sure to use IGS 7.00 patch 10 when changing this setting (see note 1071032).
    Regards, Kai

  • How to combine two queries using Web application Designer

    Hello experts...
    This should be a simple request.
    I have two existing queries that I simply want to display on the same template. What is the best way to do this?
    To add more complexity to it, if there is a result value that I want to pull from each of them, how can this be done so that I can add the results of the two into one total?
    Any help that you can provide is greatly appreciated. Thanks

    Hi,
    Displaying the existing queries on the same template is very simple... Drag and drop to web items... for ex we will drag and drop two analysis web item...
    Create 2 data providers and assign it to the web items... each dataprovider is in turn assigned to two existing queries...
    I am not sure about the result value to be pulled from each of them...
    Regards,
    Kishore

  • Web Application Designer

    Hello,
    I use the Web Application Designer:
    Release 2004s, Support Package 12, Patch 1, Revision 314
    I made a new Web Template. If I save it, I will get the following 2 errors:
    1)
    Messageclass: RSBOLAP
    Newsnumber: 018
    Description: "Java Systemerror: An unknown error in the portal communication accured.
    2)
    Messageclass: RSBOLAP
    Newsnumber: 018
    Description: "Java Systemerror: Bean RSWR_TEMPLATE_PROCESS_PROXY not found on host96eep01, ProgId=s96eep01_PORTAL_ Object not found in ookup of RSWR_TEMPLAT"
    Does someone know this problem?
    Greetings Ronny

    Please send us the solution for this issue.we also get the same error while using the Web Application Designer .
    Found the below  error in  the default trace
    Error 1
    Exception thrown [Fri Aug 15 11:29:15,070]:Exception thrown by application running in JCo Server
    java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
    Error 2
    Error> occured  >Fri Aug 15 11:29:12,413<   
    RfcException:
        message: 'ashost' is missing
        Return code: RFC_INVALID_PARAMETER(19)
        error group: 101
        key: RFC_ERROR_PROGRAM

  • Problem - over lie of data series in Line chart (Web Application Designer)

    Dear Experts,
    I have created a chart with below requiments from my user by using web application designer.
    1) Key Figure 1 (Chart type -> column )
    2) Key Figure 2 (Chart type -> column )
    3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
    4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
    5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
    The line chart of Key Figure 3 must always appear in Front then others Key Figures.
    Then following by, Key Figure 4. Last is Key Figure 5.
    As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
    1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
    2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
    3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
    So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
    Please advice me if you have any suggestion on controlling the lines order.
    Thanks!
    ~ GP
    Edited by: GP Poh on Jun 9, 2010 12:32 PM

    Hi Priya, thanks for input.
    I think I should further elaborate the problems. Thanks for your highlight.
    I have a lines chart with five key figures. So my chart will have five lines.
    Some lines from chart will overlap if the data are same.
    When overlapping of lines happens, I want to control the order of which series should be appear first.
    Likes below example,
    1) Key Figure 1 (Chart type -> column )
    2) Key Figure 2 (Chart type -> column )
    3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
    4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
    5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
               KF1  KF2  KF3  KF4  KF5
    CW 1    30     30    80    80    50
    CW 2    40     50    90    60    90
    CW 3    70     50    90    90    90
    CW 4    80     70    70    90    70
    As you can see, there is overlap in these value.
    CW 1 KF3, KF4  -->80
    CW 2 KF3, KF5 --> 90
    CW 3 KF3, KF4, KF5 --> 90
    The order which i want the series should appear first when overlapping.
    - KF3 must appear on top.
    - Then, follow by KF5
    - Last is KF4.
    So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
    Feel free to give me any input!

  • Bex Web Application Designer 3.5

    Hello, I am having trouble publishing a web template using Web Application Designer 3.5.  Our BW version is 7.0.  The underlying query in the Web App. is still 3.5.   After editing it..I did a "save" and "Publish in Role".   When I look at the report on the portal, it shows up as garbage.   Any suggestions on how to fix this problem? 
    Thanks.

    Dear Sam,
    Theer are several problems with WAD 3.x.
    Please, review these notes below:
    note 1390941 -   Incomprehensible characters when executing 3.X Web template
              To remove this entry you can't use the WAD. Please logon to the BW
              backend system and execute the report "RS_TEMPLATE_MAINTAIN" (via
              transaction SE38). Open the template and manually remove the mentioned
              tag.
    note 1391689 -   WAD 3.x is not supported in MS Windows 7  
    This should solve the issue.
    B.R.
    Edward John

  • Bex Web application designer

    Hi all,
    I have to customize a report that has been generated by the Bex Web application designer. The report is available on our portal under "Business Intelligence" > "Business explorer" > "Bex Portfolio".
    I need to understand the technical context. The generated report, is it a BSP? If yes, where can I find it in BW (which name)? I already know that in transaction RSRT I can retrieve the name of an ABAP program that has been generated by Bex, but I don't manage to figure out what it's used for.
    Thanks in advance,
    Jeroen

    Hi,
    Thanks for your reply.
    I want to add a contextmenu item 'do sth'. When the user rightclicks on a cell in the BW report & chooses 'do sth', an existing iView should be opened with some parameters that are dependent on where the user clicked in the report. Can all this be achieved in the WAD?
    Edit: I've been reading the WAD help and it seems to be possible using javascript. I'll open a new thread for more info on retrieving the parameter values.
    Thanks,
    Jeroen

  • Web Application Designer uses wrong server name

    Hello,
    I am using BI under NW04s.
    When I execute a web template in Web Application Designer it opens up the url with the server name without it's FQDN name and than I get: "URL used, <URL>, is invalid; distributed session management (DSM) cannot function. See SAP Notes 596698 and 654326.
    I've looked at these notes but I don't see how it can solve my problem.
    I've already followed the suggestions in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=279031">this</a> thread including checking RZ10 and RSPOR_T_PORTAL table.
    Any other ideas...?
    Roy

    Hi,
    try maintaining parameter <b>icm/host_name_full</b> in SMCIM (goto/parameters/change).
    hope this helps...
    Olivier.

  • Use Map In Web Application Designer

    Hi gurus:
         when I create map in Web application designer ,it shows the error:
    Messages:
    Internal error communicating with the IGS (maps)
    Map could not be Created
    But the map can be shown in Analyser,please help me!
    thanks

    Hi,
    please tell more about your scenario.
    Are you using dynamic attributes?
    Are all layers visible?
    Did you check the query that you are using as Dataprovider? 
    Is there only one geocharacteristic in the row?
    Which infoobjects are you using and which shapefiles?
    Best regards
    Andreas

Maybe you are looking for

  • Reducing size and storing it in db column

    Hi all, I need to handle a col value of 15 char but actually it is comming in as more than 15 char( say 18 char) can any one tell me how to take it in as it is a varchar2(15) column any thing like converting it to less char using ASCII or chr functio

  • Configure SAP WAS 640 / 620 for sending mail

    Hi I have a WEB 640 system, and i need to send SMTP mails to yahoo and other internet smtp adresses via Lotus Domino server which is on the Internet. Steps done to send mail: 1. In RZ10, Instance profile :- icm/server_port_1 with value: PROT=SMTP,POR

  • Macbook Pro Sleeping on its own

    I have a mid 2010 Macbook pro 13" and it has always been on Snow Leopard. This morning it was all fine but I just took it out of my bag and lift the screen out to find that my Mac won't wake up, no response from any buttons or keys. So I did what I c

  • Should I put ghost Armor full body skin on my mac?

    I just bought a MacBook pro 13 inch last weekend and even though it looks tough to scratch i would like to have some protection on it. So, I was considering ghost armor full body that would cover everything except screen and keyboard. Would that make

  • Compare 2 InetAddresses.

    Hi how would i compare 2 InetAddress to see if they are the same address. Thanks