Toast 12 dvd quality SO POOR

Hey All,
I just purchased Toast 12 and exported a H.264 via Premiere. Toast 12 is compressing it into an MEG-2 and the DVD is SO POOR. I can't give this to the client.
Toast is barely using the whole DVD and compressing a 14 gb to 2.5 gb. Just so strange.
Anyone know how to help?
-Peter

Toast isn't Apple software (neither is Premiere). You'll likely get more targeted answers on forums dedicated to that software.
Having said that, you are double compressing. Unless your material is in H.264, do not export from Premiere in that format. Export it in the native format in which you edited the material.
Once you have that file, let Toast do its thing.
fwiw - I find Adobe Media Encoder does a better job creating the various audio and video files necessary for DVD authoring. Do you have Adobe Encore? If so, use that to author DVDs. (or use iDVD - it worked great for simple discs).
Good luck,
x

Similar Messages

  • Why is DVD quality as poor as imovie09?

    I've been using imovieHD 5.x for years. I never bothered to upgrade to 6.x. I recently purchased a new intel imac and FCE 4.x along with imovie09.
    Most of my video has motion and either I see artifacts or jagged rendering of the clips. My camera is a Canon Vixia HV30 so my source video should be fine. I would love to get FCE to be my editing program of choice but for some reason, the quality was as poor as the imovie09 quality.
    Here are the methods I've tried with results.
    1] final cut express 4.x > iDVD
    Exported both contained and not-contained quicktime. (Didn't see any extensive options for export settings)
    Imported video from camcorder via "Capture" in FCE
    Burned BP and PQ and didn't seem to make much difference
    rather poor quality
    2] imovie09 > iDVD
    Exported directly to iDVD which I read is not the way to go...
    Burned both Best Performance and Pro Quality
    rather poor quality
    3] imovieHD 5 > iDVD
    Dragged imovie project file into iDVD project
    Burned BP
    seems to be the best quality so far...
    Final Notes:
    I'm watching the DVDs on a 41" LCD Samsung.
    I understand and am NOT expecting HD quality but as an experienced designer, I know when things have been compressed too much. That's what it looks like with my tests. There is a ton of data in these video clips and it seems like it's being tossed away.
    Please help...

    I discovered the instability problem when I bought an HV20 eighteen months ago.
    I spent months testing and it appears there is a problem when HDV is made into standard def DVDs in iDVD using QuickTime Movie.
    I eventually discovered a couple of workarounds that produce (almost) perfect results.
    Both these methods may sound incredibly complex as you read them but they are really quite simple. The only problem is that the first method takes a long time to render.
    1. Edit your HDV/AIC in the timeline. Then create a new DV-PAL (NTSC) Anamorphic sequence. Copy your edited HDV/AIC to the new sequence. Do not alter anything. Render the sequence ..... this will take a long time - up to twice the length of the project. Then File>Export>QuickTime Movie (Not Self-contained).
    However, if you use the QT Movie in iDVD you will get a squashed 4:3 movie, so first of all you must make QT stretch it out to its proper 16:9 dimensions like this:-
    a. Open the exported movie file in the QT Pro player.
    b. Go to Window>Show Movie Properties.
    c. Select the "Video Track" and in the "Visual Settings" panel uncheck "Preserve Aspect Ratio".
    d. In the "Scaled Size" box set the width to 1024 pixels for PAL.
    e. The "Video Track" will have turned grey, so click it to make it blue again.
    f. The opened movie file will jump to 16:9.
    g. Close it with the red button and click Save.
    2. This method is fast. Set your HV20 to "Locked DV" which means that FCE/FCP will capture it as anamorphic DV and edit it as standard definition anamorphic DV. (Use Easy Setup ... DV-PAL (NTSC) Anamorphic).
    You can then Export>QuickTime Movie to be used in iDVD and use the stretching technique mentioned above.

  • DVD quality looks poor...please help!

    Here is my question: I shot a live teaching seminar using the EX1 & Canon 5D, 1080, 30p...jib shots, steadicam...so lots of movement of the speaker. What is the best way to edit this. I formatted in Compressor the footage to ProRes LT, edited in FCP, then exported to to a self contained movie. From there I dropped the movie in Compressor, compressed to best quality 90min DVD. And burned to disc in DVDSP. When I look at the DVD on an 40" HDTV, it does not look good. Seems there is digitizing in camera movements, and doesn't look very sharp. Any advice?

    You are aware that DVDs are standard definition? That your footage is being downgraded to 720x440?

  • DVD Quality Much Poorer Than iMovie Project Play-Back

    Hi folks - I have run up against a problem that I haven't had before. Normally, playing iMovies is inferior to the finished product. But this time the finished DVD displays much more shimmering (especially of KB zooms).
    Scrolled text sourced from Rolling Credits (which normally results in excellent quality) also displays this shimmering effect, and some of the stills are slighly artifacted.
    A full-quality QT movie I made for test purposes is similarly flawed.
    Because the stills originated from scanned slides, (though imported via KB), I would not expect absolute perfection, but as said above, the playback quality in iMovie is very acceptable with stable zooming and no shimmer effect. Most of the scrolled text was black on a nearly white background.
    [Using iMovie 5.0.2, and iDVD 5 set to Best Quality. Dragged the iMovie package into iDVD.]
    Any thoughts or suggestions would be much appreciated.

    Hi Catspaw
    I'm glad You addreesed this question. I to asked it about half a Year ago and
    then was informed that the qualty was the same but as You see it isn't.
    I made a long movie of RedBull FlugTag in Gothenburg Sweden and on the
    same DVD i droped a short version from same original material.
    Diff. Full movie was a drop of the QT ref movie in the project.
    Short version was an export as full quality QT which I dropped into same
    theme in iDVD. The short version was significantly more jaggied.
    Let's hope for an explanation and if there is any settings in QT full qual that
    has to be set to give same quality.
    Yours most interested Bengt W

  • Dvd quality is poor

    hi,
    I have a brand new mac pro with hd studio. trying to output a dvd with sd footage and it's pretty bad with pixely text, nothing like the video on the timeline. so i used compressor with 8 mbps, best two pass, tried different field orders and still low quality. do people actually use this on a professional level?? can someone share some settings with me? I'm becoming discouraged. Do i have to go outside to get this done on a proper system?
    chase

    I have just had this problem with HDV.
    On my DVD player the results were juttery and dropped frames were apparent. It was rubbish. On my mac it appeared perfectly fine.
    Through my torment I tried everything. Until I made a quicktime movie, of the sequence, and used 'current settings'. I then created a new sequence, titled HDV, and opened up the sequence settings. Here I opened the video processor tab and changed the field dominance to 'upper odd' and the motion render to 'best'.
    Then I exported this single clip sequence again through compressor and chose 'Best 90 min DVD 16/9' mpeg2 two pass and dolby audio. I then then connected these files to the DVD Studio button I had prepared earlier and burned the DVD.
    Results were finally great.

  • DVD quality poor.

      Created a project in Encore with a MP4 file. DVD quality very poor. Very pixilated.  Tried multiple settings. Bitrate etc...   Did same project in FCP, 100% clearer.

    Joe Video wrote:
    Original recording with a JVC HD cam GY HM 650.
    1080 60i  Quicktime
    File directly imported into Premier from SD card.
    Edited and saved.
    Premier monitor picture quality excellent, even full screen.
    Exported – Media -  H.264, MPEG 2 DVD, MPEG2, MP4
    Results the same.
    I even tried importing the original clip from the SD card into Encore and the results was the same.
    In the Encore monitor, original layout with monitor small, you can see the pixels and the unclearness of the video.
    Not even close to the quality with the Premier monitor
    I am using a MAC Pro tower, dual Xeon processors, Apple 27” display.
    Thank you again…
    What codec is the camera quicktime please? a MOV file is a container, and the source in it could be nigh on anything from AVCHD (unsuitable for editing), Long GOP MPEG, lossless, and anywhere in between.
    Besdt approach (in addition to the excellent advice from SafeHarbour) is to import into Premiere and create a new sequence from the clip - this will make sure the sequence settings match the source - and then output (at least this is how I would do it) to an interim SD file first rather than scaling & data reducing at the same time. Use at least an 8-bit file, and I recommend the Aja 2VUY codec.
    As to why the difference in the onscreen monitors - are they set up right? I got bitten by this one once, and it turned out the in the hamburger settings (the funny little icon for settings on top right of panel) was set to automatic draft quality......
    The biggest problem really is the source - why 1080i please? Will the camera not shoot 1080p?

  • DVD playback is poor on quality Sony and Panasonic players-jagged horizontals are particularly noticeable. Top quality Verbatim DVD-R discs used. Ideas please?

    I'm new to Mac and have not regretted the move from the "other side" until now. I produce many DVDs of slideshows and movies which are frequently shown at public venues or are given to friends and organisations so quality is very important. So far all attempts at producing a DVD free of "jaggies" and other artefacts have failed, the results not being acceptable even when viewed on 22 inch LCD TVs.
    The projects have been created using iMovie which produces excellent quality Quicktime files perfectly watchable on large HD screens or projectors fed from a notebook (and a windows one at that!)
    I have burned the DVDs on the iMac internal Optiarc drive and an external LG one with the same poor results.
    No similar problems experienced over many years of using Adobe Premiere, Cyberlink and WNsoft software. In fact many audiences have commented on the near broadcast quality of the productions.
    Am I preparing the files wrongly in iDVD or do I have to seek out alternative authoring/burning software (not so easy with Mac of course) ? I have Final Cut Express 4 on the Mac also but wanted to cut my teeth on iMovie first.
    Any help will be most welcome.
    Stuart

    Hi
    Still one has to know that DVDs can only be SD-video (it's a standard) any program used.
    But You can get a better result by using iMovie HD6 or FinalCut any version as they can deliver intrelaced video over to iDVD (or Roxio Toast™ or DVD-Studio Pro) - this will not discard every second line as iMovie'08 or 09 or 11 does.
    You might also try to use FotoMagico™ to make SlideShows as this also results in as high quality possibly.
    If You need even better then consider
    • Blu-Ray (Roxio Toast™ Pro bundle incl. BD-component) - Short BD movies on standard DVD disks (BUT neeed Blu-ray player to be viewed (no not on any standard Mac either))
    • Save to Memory stick and Playback on PlayStation 3
    Yours Bengt W

  • How can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor/

    how can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor.

    Had same problem with iPhoto pictures and poor burn quality. Went back to original picture file and dragged images into idvd project from there. Set encoding at professional quality and burned at slowest speed. Got very good result with high quality slideshow when played on TV.
    Also tried Old Toad's Aug 30, 2011 advice to get a slideshow into iDVD with transitions, music, etc. from iPhoto.
    Again the quaility of the burned CD was very good. 

  • Final DVD quality poor - video deterioration on moving areas of screen

    Hi
    Can anyone help? - having problems with iDVD finished IMG quality.
    Have an iMovie project, shared with iDVD, prepared menus, etc. Video looks find in iMovie, in Quicktime (using iMovie IMG file) and in iDVD previews.
    Then saved in iDVD as img file (no superdrive) and opened in DVD Player - picture quality is poor - any moving images get wiggly edges - see the picture below (taken with a digicam as I can't get a DVD screen shot) This continues throughout.
    http://www.mcclellandmedia.com/images/S7000744.JPG
    As you can see, background reasonable, moving areas are poor.
    A history of the project... Started as an iMovie NTSC project whilst living in Canada on an older version of iMovie on a G3 iMac. Material was imported via DV Camera Analog in, then DV tape to iMac. iMovie project was in NTSC.
    Moved to UK and updated to MacBook - exported old iMovie to PAL.mov file, opened in iMovie as a PAL project. Updated menus/titles, etc, then exported to iDVD.
    Tried both settings in iDVD, Quality & Performance, and both have the same poor quality issues.
    I could try importing all the original source material again but that would be a HUGE job as material is scattered on many sources. As everything plays fine in iMovie, in Quicktime with the MOV file and in the iDVD preview, I'm not certain that would help anyway.
    I'm an actor and this is my Showreel DVD intended to impress directors - I need it to look right
    All advice appreciated.
    Dave
    MacBook   Mac OS X (10.4.10)   2 GHz Intel Core 2 Duo, 1GB 667MHz DDR2 SDRAM

    A history of the project... Started as an iMovie NTSC project whilst living in Canada on an older version of iMovie on a G3 iMac. Material was imported via DV Camera Analog in, then DV tape to iMac. iMovie project was in NTSC.
    Moved to UK and updated to MacBook - exported old iMovie to PAL.mov file, opened in iMovie as a PAL project. Updated menus/titles, etc, then exported to iDVD.
    Ugh. Video standards conversion (NTSC<->PAL) is tricky and may produce quite good or very bad results. Per definition the quality always suffers because different resolution and fps must be converted!
    Most PAL gear can play NTSC stuff so you don't necessarily need to convert NTSC to PAL. But for PAL to NTSC you need software.
    JES Deinterlacer is a very good quality app for video standards conversion.
    For more info, see:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#PALNTSC

  • Quality of DVD is very poor; help

    Hi,
    I'm new to Premiere Elements.  I have an HD Panasonic Camcorder.  I created several AVCHD videos and they look great.  I was told by a family member they do not have a blu-ray player, so I created one using the DVD format.  WOW, what a difference.  The video quality was very poor...I couldn't read the numbers on the soccer players.  I then tried the Panasonic software that came with the camera and it looks great....but, not as good as AVCHD.  I even tried something called DVDVideoSoft and it looks great.  I really would like to stick with Elements when having to burn a DVD.  Where do I start to figure out why my DVD quality is so poor?  The lines on the soccer field look like double lines.  I'm assuming I must have a setting not set correctly.  Suggestions?
    Thanks, Tom

    Tom
    I have been following your thread from a distance, but your latest post lead me to add some comments...
    I am not clear why you feel that you need the HD Writer for getting your video from the camera to the computer.
    And, if you decide to go that route, your focus should be the .m2ts for the video file which is imported into Premiere Elements 11 Windows.
    http://www.avforums.com/forums/camcorders-video-editing/1265583-panasonics-hd-writer-ae-so ftware-its-extra-files-they-necessary.html
    The link above addresses those "extra files" that the HD Writer generates in doing its operation.
    If your 1080p30 is what you are now shooting, please consider:
    Manually set project preset (File Menu/New/Project)
    NTSC
    DSLR
    1080p
    DSLR 1080p30
    putting a check mark next to Force Select Project Setting on this Project before you exit the new project dialog. Then import your video into the project with the program's Add Media/Files and Folders/Project Assets from where you will drag the video to the Expert workspace Timeline.
    Publish+Share
    Disc
    DVD
    with burn to: NTSC_Widescreen_Dolby DVD
    ATR

  • After exporting a slideshow in LR5 to USB or DVD playing quality is poor.  Any suggestions?

    After exporting a slideshow in LR 5 to USB or DVD playing quality is poor.  Any suggestions?

    It would be more helpful to understand your workflow and what type files you have made.
    Are you using audio from both cameras? Do the changes/problems correspond with the camera switch?
    Try this with a minute of the problem footage
    Export a QT reference file(export QT(not QT conversion)-uncheck make self-contained in the lower left)
    (a reference file is like a band-aid- do not use more than once).  Listen to it in QT- how does it sound?
    If you have a mix/audio problem here it is most likely related to what you are exporting from FC.
    If it sounds good:
    Create an AC3 and MPG2 of your minute test
    Create a DVD with a track of your 1 minute test.
    Build the dvd to a folder on your desktop.
    Open the Video_TS(from the build folder) in the Mac DVD player App. Whatever you see and hear in the app is exactly what will end up on the burned disc. This is the best way to QC the DVD before you burn it.

  • DVD quality is really poor.

    I am new in FCPX. I finished my project and export it as DVD. I also export it as H.264 and even Uncompress then Burn it as DVD. In all cases the quality of DVD is really poor. what should I do for better quality?

    Are you editing in Proxy mode by any chance?
    If you are, then unless you change to "Optimised or Original" in the dropdown menu at the top right of the Viewer, then Proxy quality is what will be exported.
    Andy

  • DVD Player: Poor tolerance to less-than-ideal DVD quality?

    "Real world" DVDs from rental stores have surface scratches, fact of life AFAIK most DVD players handle most of these fine. (With the odd exception, naturally.) I have had 6 consecutive DVDs that "broken down" on being played using Tiger's DVD Player (10.3.9). At first I blamed the DVD quality, but now I suspect I should be blaming Apple's software for not handling "real world" standards--?
    Its a bit hard to believe 6 in a row are faulty, or the store would be getting a rain of abuse. Currently, I'm getting more more DVDs that "break down" than that play right through...
    I'd welcome other's experiences: is "normal" for Apple's DVD Player? Do "set top" DVD players perform better? If so, why? Etc, etc.
    Basically, I'd like to get the low-down on what's up. I'm thorougly sick of finding my movies "stall" on me, it makes the whole thing pointless after all.

    While I could try a cleaner, I'm doubtful that this is the problem: the stalls occur in essentially the same places on replaying the DVD, even after ejecting and re-starting the movie. I would have thought a dirty lens would show a more random pattern of issues--?
    (Excuse the very slow reply: I've been trying over a couple of days to post when Apple's forum is actually working for me!)

  • DVD quality

    Sorry for my  poor english.
    I 've  made a 94 minutes imovie (ilife 11) project with my brand new retina.
    But when I make a dvd from idvd of the imovie project, I get a bad quality film (worse than before with the old imovie).
    I try to save the project for a double layer dvd to avoid compression but I get the same bad quality.
    Thanks for your help.
    olivier

    Hi
    There are many layers to this Question - May be You find help here
    DVD quality  
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is interlaced Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    • iMovie'08 or 09 or 11 - CAN NOT DELIVER THIS any way know - as they all discard every second line when going from Event's to Project's = Can not be mended.
    • iMovie HD6 - Can deliver 100% of what any DVD authoring program needs - and so can -
    • FinalCut - any version
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    Try to break the process up into two stages
    • Save as a DiskImage (calculating part)
    • Burn from this .img file (burning stage)
    To isolate where the problem starts.
    Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    • No File Vault on - Important
    • NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
    • Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
    • Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
    • And let Mac run on Mains - not just on battery
    Yours Bengt W

  • One Step DVD quality

    I have been reading the posts about using IMOVIE09 and then using IDVD. I understand the quality is not great because of IMOVIE09 and the way it does the import.
    IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
    Thanks

    Hi
    IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
    YES !
    else on Quality and iDVD - my notes
    DVD quality 
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    Try to break the process up into two stages
    • Save as a DiskImage (calculating part)
    • Burn from this .img file (burning stage)
    To isolate where the problem starts.
    Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    • No File Vault on - Important
    • NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
    • Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
    • Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
    • And let Mac run on Mains - not just on battery
    Yours Bengt W

Maybe you are looking for