Tolerance Limits with Date and quantity

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

Go to SPRO - Material Managemetn - LIV - Invoice Block - Set Tolerence limit.
USe company code and maintain a value for ST
ST: Date variance (value x days)
The system calculates for each item the product of amount * (scheduled delivery date - date invoice entered) and compares this product with the absolute upper limit defined. This allows relatively high schedule variances for invoice items for small amounts, but only small schedule variances for invoice items for large amounts.

Similar Messages

  • Set up Tolerance Limits with Date and quantity for GR

    Hi Experts,
    We would like to set the GR Tolerance Limits with Date and qty.
    how to set the Tolerance Limits for Date and quantity..??
    if we created PO 100qty and date 01-05-009.
    if we receive the goods on 20-04-2009 and 50qty...
    For GR .. Migo should be give error message..
    where can i set this Tolerance Limit Configuration.... can u please explin me..
    Thanks in Advance,
    Anthyodaya .

    hi,
    You can do one thing...
    Activate the SLED check...
    BY this when the date goes earlier or late from the expected date, then system show you the messages like:
    1. Earliest delivery date is DD.MM.YY..
    2. Expected delivery date was DD.MM.YY...
    In std sap system, the second message is already error message...so when get late delivery then it'll not be possible to maintain the GR...
    For the qty varinace, activate the quantity variance either via over/under delievery tolerances..or
    Via SPRO settings...
    SPRO >> MM >> LIV >> Invoice block >> check for qty tolerances and make the settings as per your requirement...
    Regards
    Priyanka.P

  • GR  Tolerance Limits for Date and quantity..??

    Hi Experts,
    We would like to set the GR Tolerance Limits in the Configuration level.
    how to set the Tolerance Limits for Date and quantity..??
    if we created PO 100qty and date 01-05-009.
    if we receive the goods on 20-04-2009  and  50qty...
    For GR .. Migo should be give error message..
    where can i set this Tolerance Limit  Configuration.... can u please explin me..
    Thanks in Advance,
    Anthyodaya.

    Hi,
    GR tolerance limits can be set based on the quantity only .It is configuration settings .
    MM-->Inventory Management-->Inventory Management  and physical Inventory --->set tolerance limit/
    Following are the standard settings:
    B1 ( order price quantity variance with error message): 50 %
    B2 (order price quantity variance with warning): 20 %
    VP (variance from moving average price) 25 %
    In case of dates, the tolerance limit settings based on delivery date can be achived by using user exists or create a Z t.code goods receipt copying standard one & write a code to apply your logic while you do the GR.
    Thanks,
    AMIT

  • Tolerance Limits for Date and quantity..??

    Hi Experts,
    We would like to set the GR Tolerance Limits in the Configuration level.
    how to set the Tolerance Limits for Date and quantity..??
    if we created PO 100qty and date 01-05-009.
    if we receive the goods on 20-04-2009 and 50qty...
    For GR .. Migo should be give error message..
    where can i set this Tolerance Limit Configuration.... can u please explin me..
    Thanks in Advance,
    Anthyodaya.

    Hai
    for  quantity tolerence limit  u can do it  while creating  P O  in item details-->delivery tab.
    for date go to SPRO-->mm>purchasing->material master> define purchase value key>in that   st.del.time var               here it wil compare the dates and shows how much deviation is occuring for GR date
    configure messages in SPRO-->mm>environment data--> define attributes of system messages
    hope it may help u
    regards
    chandrasekhar

  • Create work flow for date and quantity change in Purchase order

    Hi SAP Guru's,
           Kindly share abt how to create a workflow in SAP for purchase order date and quantity change and link it with SAP PS.
    Scenerio : If someone change the Date n Quantiy of PO , the system should trigger a mail to the person responsible.
    Thanks a Lot
    Regards
    Janani

    I did create a Workflow in SWDD for PO date n quantity change , but am not sure how to map the same with the project . Kindly explain step by step.
    Thanks
    Janani A

  • Fixed Date and Quantity for Sales order

    We have Requested Delivery Date in our order entry page in CRM ISA. This date is transferred fine to R/3 with the sales order.
    We want to flag the "Fixed Date and Quantity" field in schedule lines of the order in R/3 when the order is replicated to R/3.
    We also want to restrict the order specific to particular organization for which the fixed date and quantity is flagged when the
    order is replicated
    Any ideas on how to achieve this?

    thanks Rajesh..But I would like to do in a sales order without doing going to any other transaction. Can I assume that this is a gap and we need to code in user exit to trigger 413 movement type.
    points are rewarded.
    regards,

  • Help on export sybase iq tables with data and import in another database ?

    Help on export Sybase iq 16 tables with data and import into another database ?

    Hi Nilesh,
    If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
    Extract/ Load table
    Insert location method : require IQ servers to be entered in interfaces file
    Backup/Restore : copy entire database content
    If you have not the DDLs, you can generate them using IQ cockpit or SCC.
    http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
    http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
    Regards,
    Tayeb.

  • Tp ended with error code 0247 - addtobuffer has problems with data- and/or

    Hello Experts,
    If you give some idea, it will be greatly appreciated.
    This transported issue started coming after power outage, sap system went hard shutdown.
    Then we brought up the system. Before that , we do not have this transport issue.
    our TMS landscape is
    DEV QA-PRD
    SED-SEQSEP
    DEV is having the TMS domain controller.
    FYI:
    *At OS level, when we do scp command using root user, it is fine for any TR.
    In STMS, while adding TR in SEQ(QA system), we  are getting error like this.
    Error:
    Transport control program tp ended with error code 0247
         Message no. XT200
    Diagnosis
         An error occurred when executing a tp command.
           Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
           Return code:    0247
           Error text:     addtobuffer has problems with data- and/or
           Request:        SEDK906339
    System Response
         The function terminates.
    Procedure
         Correct the error and execute the command again if necessary.
    This is tp version 372.04.71 (release 700, unicode enabled)
    Addtobuffer failed for SEDK906339.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    standard output from tp and from tools called by tp:
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247

    when we do scp using sm69,
    SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
    it throws the error like below,
    Host key verification failed.
                                                                                    External program terminated with exit code 1
    Thanks
    Praba

  • How to forward sms messages via email with date and contact received info

    Does anyone know how to forward sms messages via email with date and contact received info.
    Currently when I forward only the body copy of the sms message is sent in the email.

    This is not currently possible. Sorry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Using expdp to export a mix of tables with data and tables without data

    Hi,
    I would like to create a .dmp file using expdp, exporting a set of tables with data and another set without data. Is there a way to do this in a single .dmp file? For example, I want all the tables in a schema with data, but for the fact tables in that schema, I only want the fact table objects, not the data. I thought it might be easier to create two separate .dmp files, one for each scenario, but would be nice to have one .dmp file that satisfies my requirement. Any help is appreciated.
    Thanks,
    -Rodolfo
    Edited by: user6902559 on May 11, 2010 12:05 PM

    You could do this with where clauses. Let's say you have 10 tables to export, 5 with data and 5 without data. I would do it like this
    tab1_w_data
    tab2_w_data
    tab3_w_data
    tab4_w_data
    tab5_w_data
    tab1_wo_data
    tab2_wo_data
    tab3_wo_data
    tab4_wo_data
    tab5_wo_data
    I would make one generic query
    query="where rownum = 0"
    and I would make 5 specific queries
    query=tab1_w_data:"where rownum > 0"
    query=tab2_w_data:"where rownum > 0"
    query=tab3_w_data:"where rownum > 0"
    query=tab4_w_data:"where rownum > 0"
    query=tab5_w_data:"where rownum > 0"
    The first query will be applied to all tables that don't have their own specific query and it will export no rows, the next 5 will apply to each of the corresponding table.
    Dean

  • Update delivery with material and quantity.

    hai abap gurus,
          My requirement is to create a sales order and create a delivery with sales order reference.
          I done both.But now i want to  update my delivery with material and quantity.
          Is there is any bapi or function module.
          can any one help for my request.
                                                             with regards,
                                                                  mallik

    Hi,
    You're on good way while using FM SERNR_ADD_TO_LS and SERIAL_LISTE_POST_LS .
    In the second function module you don't need to pass anything.
    Don't forget to make a commit work to avoid database error during synchronisation.
    I had also one case of updating the serial to the document. It was the Sales order. I have worked with the function module SERNR_ADD_TO_AU which is internally using the function module SERNR_ADD_TO_DOCUMENT. The following is the sample code for it:
      CALL FUNCTION 'SERNR_ADD_TO_AU'
        EXPORTING
          sernr                 = w_sernr
          profile               = c_zd01
          material              = w_matnr
          quantity              = '1'
          document              = w_vbeln
          item                  = '00010'
          debitor               = fs_header-sap_ship_to
          vbtyp                 = 'C'
          sd_auart              = w_doc_type
          sd_postyp             = w_item_cat
        IMPORTING
          anzsn                 = w_anzsn
          zeilen_id             = w_zeile
          serial_commit         = w_serial_commit
        EXCEPTIONS
          konfigurations_error  = 1
          serialnumber_errors   = 2
          serialnumber_warnings = 3
          no_profile_operation  = 4
          OTHERS                = 5.
      IF sy-subrc eq 0.
        CALL FUNCTION 'SERIAL_LISTE_POST_AU'.
        COMMIT WORK.
      ENDIF.
    And one more thing, don't forget to have the call to the function module 'SERIAL_LISTE_POST_AU' amd commit work if the return code is 0. This is also mandatory.
    regards
    Satish

  • Export with DATA and DDL

    Hi,
    in 8i version, I have to export a table with DATA and DDL. I wonder if following Command line is enough or I should add some other option ?
    exp sys/***@DB TABLES=MYTABLE file=d:\MYTABLE.dmp
    Many thanks.

    or I should add some other option ?
    exp sys/***@DB TABLES=MYTABLE
    file=d:\MYTABLE.dmp Yup, this enough, it will bring DLL for indexes on table MYTABLE as well
    Virag

  • HR -- adding year with date and month

    Hi all,
    Can any one let me know what is the logic for adding Year with date and month in HR.
    ex: 01.10.2008   from this date it should be 2 years.
    thnks
    joshi.

    Hi
    u can add days to the date directly ....
    if u have the date V_DATE of type sy-datum u can add directly number of days to get disired date ..
    v_date1 =  v_date + 365 .
    hope it helps ..........

  • Doubt in pgi date and quantity in SAP-SD

    Hi All,
    Please let me know the table and field name for PGI date and quantity in sap-sd

    Hi Arun,
    PGI Date and Quantity Fields
    For Acual PGI Date kindly refer the header table for delivery LIKP and field would be WADAT_IST
    For Quantity Delivered kindly refer the item table for delivery LIPS and field would be LFIMG
    Hope this will help you out !
    Feel free to ask questions; If any!
    Reward if it helps!
    Regards,
    Syed Nasir

  • Why Apple doesn't provide .jpg-files for photos with date and our like Blackberry and Samsung?

    why Apple doesn't provide .jpg-files for photos with date and our like Blackberry and Samsung?
    I have to save photos (for medical use) on my pc and this suffix would be useful to identify them quicker.
    Thanks

    http://www.learn.usa.canon.com/resources/blogs/2014/20140708_winston_filenames_b log.shtml

Maybe you are looking for