Tones are not working while ringtone works

Phone will ring and alarm clock works. But, any tones associated do not work. Vibrate is how I know I have a text message or email

Make an appointment with the genius bar at your local Apple store and take your credit card with you. It's most likely permanently damaged. An out of warranty replacement will cost you US$149.

Similar Messages

My ring and text tones are not working?

Both my ring tone and text alert tone are not working. I'm only made aware I have a call or text message through the phone's vibration. I have checked all the 'Sound' settings and all appears to be fine and ringer volume slid to high.
Do I need to reboot this phone for them to work as I'm not sure how to do this? I'm using iPhone 4 version 5.0.1
Would I loose all my files and apps on my iPhone after rebooting?
Appreciate any clear help and advice on this popular subject that is available.
Best wishes
Sizo65

Thank so much Ingo2711, your suggestion has solved my problem. I am so new to the iPhone I didn't realise it had a handy little mute button and it was infact switched onto 'mute'.
And thank you for the rebooting advice too.
Best wishes
Sizo65

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

Hi i just synced my iphone to my new laptop ive lost all my ringtones and i tried to buy anouther and it says tones are not available on this device, a device that can run i0s 5.0 or later is required please help :(

hi i just synced my iphone to my new laptop ive lost all my ringtones and i tried to buy anouther and it says tones are not available on this device, a device that can run i0s 5.0 or later is required please help

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

Inspector > Text > More > Language
Only applies to selected text, like making it a particular font.
It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
Peter

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

Extensions are not loaded while boot

Hi there!
I have the problem, that the driver für my firewire audio interface and the driver for my dsp cards are not loaded while booting the system...
How can I activate these extensions?
Thank you for support!
Cheers
André

Are you talking about kext's? Did you check that they are even there (look in /System/Library/Extensions or type kextstat in terminal).

Presentation_Model javascripts are not loading while customizing OpenUI

Hi All,
I would like to know, if any one tried to customize the UI with given examples like adding google map hover, partialrefresh javascripts in Oracle documentation [Configuring Open UI.pdf]
I tried to follow the steps given for changing "manifest_extensions.map" and "custom_manifest.xml" and added given js files in location "siebel\custom\*.js"
But presentation_model javascripts are not loading while checking in developer tools in google chrome browser.
Note: physical_renderer javascript was loaded. and i restarted server after modifications.
Let me know if i'm missing any steps or settings. Thanks
Best Regards,
Venkat

A same issue I have encount is:
I write
<KEY NAME="PartialRefreshPModel"> in Custom_manifest.xml.
but it should be:
<KEY Name="PartialRefreshPModel">
You should check the case sensitive.

HT201401 my ring tones are not working

My ringtones are not working

Sorry to hear that.
Do you have a question?
If so then please explain your issue in far greater detail than :"My ringtones are not working" and ask your question.

IMessage notification alert tones are not working on my iPad ios 8. Is this a know bug?

my iMessage settings are exactly the same on my iPad air as on my iPhone five, but the alert tones do not sound off when I get an iMessage. Is this a known bug with or without a fix? Is there a setting that is different on the iPad then on the iPhone that I am just overlooking?

Hi AppleUser543210,
If you are having issues with your iPad's notification alert sounds not functioning, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPad -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPad as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Critical BitLocker Drive Encryption system files are not available- which was working earlier.

Hello All,
The E drive (external USB drive) of server which was encrypted using bitlocker. earlier it was working perfectly fine. On running the BitLocker configuration screen we are getting with a message stating that ‘Your system
volume is not configured correctly to allow you to use BitLocker Drive Encryption. Critical BitLocker Drive Encryption system files are not available’
now whenever we are clicking on E drive it is showing to format the disk.
can anyone help me to understand which are the files required or repair for bitlocker?
Thanks & Regards,
MAsud Hussain

Hi Masud,
Do you have any progress at the moment?
If there are any related error messages in Event Logs, please post them out for further analyzing.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Why won't any videos load from safari that are not related to YouTube work?

I'm trying to load video replies from ask fm but they are not loading, and it's the same with all other videos that aren't related to YouTube. Is there some sort of software or programme that I need to download?

https://itunes.apple.com/us/app/skyfire-web-browser-your-path/id384941497?mt=8
http://www.guidingtech.com/16698/play-flash-videos-iphone-ipad-ipod-touch/

My ring tones are not listed in my Sounds to select as a ring tone any more

My *.mr4 ring tones show in my library and sync both on phone and itunes, but are not listed in my Sounds to select as a ring tone. Was all setup and working and have vanished when I installed latest update. How can I fix this?

Plug your iPhone into your computer and bring up the summary page in iTunes. This is where your sync preferences are located. Go to ringtones and uncheck sync ringtones to get rid of the ringtone from your iPhone. Then after it is removed, check sync ringtones and sync the ringtone back. Deleting and re-syncing the ringtone should resolve it. If not, you will most likely need to restore to factory settings. Make sure to back your iPhone first if you need to restore.

Tones are not working while ringtone works

Similar Messages

Maybe you are looking for