Toolbar icons are not displaying in After upgraded to Acrobat 9.4

I had developed one plug in tool. which was working fine in Acrobat 9.0 , After i upgraded to Acrobat 9.4 I am unable to se few Icons. Please tell whether we should make modifications in the code written in Javascript or ?????

We don't have your code - you do. I would simply use the debugger to track down the problem.

Similar Messages

Toolbar icons are not displaying, After upgraded to Acrobat 9.4

Hi All,
We have developed one tool using Acrobat javascript and C++ plugin. It is very well working in Acrobat 9. But after my acrobat is upgraded to 9.4 version. some icons in the toolbar is found missing. I am unable to find the reason behind dissappearing of icons in toolbar. please provide a solution for this problem, The problem continues in Acrobat 7 too , when try to install my tool into it. Is their any specific coding standards or syntactic constructs to be followed for specific versions. Please help me in this regard.

I found the solution, We need to change
some coding style by giving conditions for particular version , foe example we should make changes in color initialisation. Insteatof color.red , use [RGB,1,0,0] and many.........

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

Room Template's icons are not displaying

In Collaboration->collaboration content->Administration of Room part Templates,
The Room Template's icons are not displaying.
All icons are avilable in the folder
\usr\sap\J2E\SYS\global\config\cm\etc\public\mimes\images
i checked in both IE 6.0 and Netscape.
Please give some Hints about this.

i solved the problem.The root directory was changed.So i corrected.The path is as follows
systemAdministration<>SystemConfiguration<>KnowledgeManagement<>ContentManagement<>FileSystemRepository

My Social Media Icon are not displaying within FireFox

My Social Media Icon are not displaying within FireFox. And all other browser your able to view Icons - For some reason is now displaying in FireFox.
Can someone help me with this issue? I have alot of clients that view our website using firefox browser.
Domain Name: ForemostFitness.com

Do you use any extensions that block ads? That occurs to me because the service you're using for social icons (addthis) has "ad" in its name and perhaps they are getting filtered that way.
To determine whether an extension is a likely culprit, you could disable that one temporarily, or you could disable them all by testing the page in Firefox's Safe Mode. That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Windows 8.1 modern shortcut icons are not displayed in taskbar after domain join

Hello,
Like the title says: modern (metro) shortcut icons in taskbar are not displayed after domain join. There's just blank space where the icon should be for Store, OneDrive etc. Shortcuts work for classic and 3rd part applications.
Shortcut icons work properly if I log in with local account. The applications work properly whether the icons are displayed or not for every user (local and domain).

Hi,
Since this issue only happened for domain account, I suggest you check whether there're some GPOs\logon scripts applied to the domain accounts which controls the taskbar icons.
Have you tried to unpin the modern taskbar icons and re-pin the icons to the taskbar? What is the result?
Yolanda Zhu
TechNet Community Support

I have two add-ons that are enabled AND working but they are their icons are not displaying.

I have Firebug and Adblock-Plus on my Firefox browser that are not displaying their normal shortcut buttons next to the search bar of Firefox. They were displaying fine yesterday, now today they are not displaying at all. They are installed and enabled. There were no changes on my end (user end), that could explain this occurrence. No new addons installed. No new plugins. Any help would be grateful.

I have Firebug and am on Ubuntu at present, so my options may differ slightly from Windows, and over time the Firebug options probably have changed.
If you reset the toolbars to default settings by resetting localstore.rdf you may need to make some changes to recreate whatever you had before.
I may display a full Firebug toolbar with keyboard key F12. That toolbar includes several display options from clicking the firebug icon. I also have Firebug showing as an option from
* Tools -> WebDeveloper -> Firebug.
If I use the customise toolbars option; for example from right clicking an empty space on a toolbar; the palette of icons includes one for Firebug that I may place where I like. If you try to create a custom toolbar remember it needs to be populated, if it has nothing on it it will not display.
P.S.
Presumably you are able to use Firebug, it is just an icon that you are missing ? is that correct ?

Facebook social plugin of fan page feed not displaying correctly after upgrading to Firefox 17

Facebook fan page feed not displaying correctly since upgrading to Firefox 17. Code hasn't changed, and it still displays correctly in Internet Explorer. In Firefox 17, the background has gone grey so that the text is no longer visible, and photos of fans are no longer displayed at the bottom. (Issues occur on both my Dell PC/Windows Vista and my MacBook Pro.) Please advise.
**Issue seems to have resolved itself; I guess plugin developers caught up with Firefox update.**

Facebook fan page feed not displaying correctly since upgrading to Firefox 17. Code hasn't changed, and it still displays correctly in Internet Explorer. In Firefox 17, the background has gone grey so that the text is no longer visible, and photos of fans are no longer displayed at the bottom. (Issues occur on both my Dell PC/Windows Vista and my MacBook Pro.) Please advise.
**Issue seems to have resolved itself; I guess plugin developers caught up with Firefox update.**

Car bluetooth not displaying contacts after upgrading to iOS4??

After upgrading my iphone 3GS to OS4.0, my 2010 Grand Cherokee will no longer display names when using the built in UConnect hands free bluetooth system. It worked fine before the upgrade. Now when I get a call, it will only show "incoming call" or a long string of numbers and letters. This is so frustrating! Fix this apple or let us downgrade until this can be fixed.

It may not be supported as of yet. The iOS4 just came out and not many searches are related to updating the UConnect standard. They are mostly related to the "MyGIG" UConnect version of equipment installed which are on the more expensive models (SRT8 for example).
You can contact Chrysler for more support information including the firmware update to allow iOS4 but they may not be able to answer your question for factory installation reasons.

Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
Issue is appaerently not unique for C4680 but also other HP equipment.
Has anyone encountered this malfunction? If yes were you able to resolve it and how?

Your screenshots are not appearing for me.
Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

Blender do not display correctly after upgrading xorg

Yesterday, I do a pacman -Syu
and then found that blender do not display correctly.
The panels are not shown and the working area is cut into 2 halves of different colors.
Then I check /var/cache and found that some X components were upgraded.
My graphic card is ATi mobility Radeon 7500
Anybody can help?Thanks!

From the description, I seem to have exactly the same problem. My wm is dwm-4.0 and I grabbed some other info which may be useful:
[root@myhost ~]# Xorg -version
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux myhost 2.6.19-beyond #1 SMP PREEMPT Fri Dec 15 17:41:19 EST 2006 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
[root@myhost ~]# blender -v
Blender 2.43
[root@myhost ~]# pacman -Qii xorg
Name : xorg
Version : 11R7.0-1
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL :
License : None
Architecture : i686
Size : 4096
Build Date : Sat Feb 18 14:04:14 2006 UTC
Install Date : Wed Jul 26 22:39:07 2006 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : xf86-input-keyboard xf86-input-mouse xf86-video-vesa xorg-server xorg-server-utils xorg-xauth xorg-xinit xorg-xkb-utils
Required By : None
Conflicts With : None
Description : X.Org dummy package
[root@myhost ~]# pacman -Qii blender
Name : blender
Version : 2.43-3
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL : http://blender3d.org
License : None
Architecture : i686
Size : 31041839
Build Date : Mon Mar 12 22:28:29 2007 UTC
Install Date : Thu Mar 22 05:45:42 2007 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : desktop-file-utils libjpeg libpng openexr python>=2.5 sdl
Required By : None
Conflicts With : None
Description : A fully integrated 3D graphics creation suite
Also, when I run blender from a term it says 'Compiled with Python version 2.5' (no error messages).
It has been a few days since I pacman -Syu'd, so I'll do that and report back if it fixes things.

Icons are not displayed

Hi,
I have installed the Netweaver with the EP6. I have created a role and assigned an iview to it. The iview is just a copy of the Doc Explorer that comes with the installation, I guess is one of the basic iviews. When I log onto the system with a user with only this newly created role, the iview of the Doc Explorer shows the folders and files names, but instead of the images fot the folder and thie file it appears an red X showing that there is no image.
First I thought that the images didn't exist in the system, but if I logon with a user that has the role "eu_role" (which is like the standard role if I'm not wrong), the images or icons are displayed.
I guess it is something about permissions, but I am a little bit lost, please can anybody help me?
Thanks in advance.

Hi,
Here's something you might try...
Right-click the icons and call up the properties so
that you can copy the image URL. Try pasting that in
a browser and try to load it. If it doesn't work, then
you might cut off folders in order to figure out at
which level it is breaking.
You might also check the Component Monitor under System
Administration > Monitoring to check for any errors for
"etc". You might also check the Application Log to look
for hints.
Regards,
Darin

Login action buttons no longer work and some pages not displaying correctly after upgrade.

After recent update, some web pages not displaying correctly and Login buttons on some sites do not work. I've updated my plugins and restarted computer, but problems remains. Is this Java, Javascript or something else? Same pages are working fine in IE.

Please update the firefox to the latest version of firefox 26
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Access point are not coming up after upgrade image of WLC

Hi,
I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
7.0.116.0 (default)
7.0.98.218 (active)
so i reload the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
7.0.116.0 (default)(active)
7.0.98.218
So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

Sunil,
When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap: < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
Hope this helps.

Toolbar icons are not displaying in After upgraded to Acrobat 9.4

Similar Messages

Maybe you are looking for