Tooltip on checkbox object in table_column

Hai Experts,
i have a table with columns on a view within my webdynpro, one of the columns contains a checkbox without the text property filled. I want to add a tooltip on mouseover the checkbox.
I find out the tooltip is not shown in the browser allthought it is shown in se80.
When i add text to the checkbox the tooltip is shown in the browser on mouseover the text.
In my case i do want a plain checkbox without text and a tooltip on mouseover the checkbox, is this possible?!
Grtz Richard

Hi Richard,
Its simple, create check box, dont give any text for that, u have tooltip property for that check box, in that give your
desire text, that will display on browser. Hope it solves.
Cheers,
Kris.

Similar Messages

Adf tooltip in checkbox

hi how can i put tooltip in checkbox am in jdeveloper 11g release 2

Or you use a popup with a note window to get a bigger tooltip and use a popup behavior on hte check box like
                            <af:selectBooleanCheckbox text="selectBooleanCheckbox 1" label="Label 1"
                                                      id="sbc1" shortDesc="this is a help test">
                                <af:showPopupBehavior triggerType="mouseHover" popupId="p1"
                                                      align="startAfter" alignId="sbc1"/>
                            </af:selectBooleanCheckbox>
                        <af:popup childCreation="deferred" autoCancel="disabled" id="p1">
                            <af:noteWindow id="nw1">
                                <af:panelGroupLayout id="pgl2" layout="vertical">
                                    <af:outputText value="aaaljdlsa ljad lkasljsalalskd jsajjlsajd lkas jlkjsalksalasj las al ajd laj laj laj lkaj ljad llaj laj lakjd lkajlk jaslkd jalkdj laksjd lkajd lkajd asd." id="ot6"/>
                                    <af:outputText value="4324432432 2 234 24 234 24 24 24 24234324 24 234234 234 234 234 " id="ot7"/>
                                    <af:outputText value="khdsakdshhdssd kdsh ksdhf ksjhf kjshdfjkhksjfh ksfhsk skf ksf ks hf fhdsh kshf ks hfshf kjshkjs kjshdf k" id="ot8"/>
                                </af:panelGroupLayout>
                            </af:noteWindow>
                        </af:popup>
                    </af:panelGroupLayout>Timo

Tooltips over graphics objects

Hi All
Hope you all had a merry Christmas.
Does anyone know if i can add a tooltip to a graphics objects?
Basically i am drawing a series of rectangles in a JPanel and when i hover my mouse over each rectangle i want a different tip to display...however if i use the setToolText() method it sets it for the entire JPanel? any ideas?

tooltip-like popup with mouseover

How to create checkboxes in BIP templates?

I am creating BI Publisher Template for use with Siebel. In the datastream, values for boolean fields are passed as Y or N.
However if I place a MS Word checkbox object and give the field as the property, nothing happens at all.
I have tried using conditional sections and Wingdings font to display checked and unchecked icons depending on the value of the flag. But, when report is run in PDF, Wingdings can not be used.
When exposing the field directly, it populates with "Y" or "N". However, we want checkboxes.
Any ideas appreciated.

I have similar issue.
1) I have copied Wingdng2.ttf file to $BIHome/jdk/jre/lib/fonts/ folder.
2) I have created xdo.cfg file and configured to use Wingdings 2;82;163 for checkbox display.
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
<fonts>
<truetype path="c:\windows\fonts\WINGDNG2.ttf"/>
</fonts>
<properties>
<property name="rtf-checkbox-glyph">Wingdings 2;82;163</property>
</properties>
</config>
Problem: The checkbox displays fine under English locale, however it is displayed as Rhombus/Diamond under French locale (when .xlf file is used). I am using BIP 10.1.3.4.2.
Does anyone know how to fix this issue? It looks like the translation of checkbox from english to french is messed up.

Dynamic changes to checkbox fill color

I would like to know how to dynamically change the fill color of a checkbox. When I use the following code, I change the color of the entire object (including the text). I just want to change the color of the little box.
this.fillColor = "255,255,0";
Any insight?
Thanks,
Emily

Try
xfa.resolveNode("form1.page1.cb.ui.#checkButton.border.fill.color").value = "255,255,0";
where the checkbox object is 'form1.page1.cb'
Steve

Failed to GENERATEPDF when using checkbox UI element

Hello everybody,
I have a small interactive form, which works perfect as long as I do not use a context boolean element as type checkbox in the interactive form. As soon as I use a checkbox I get following exception underneath.
I user Netweaver developer Studio SAP NetWeaver Developer Studio
Version: 7.0.13
Build id: 200708072056
and Adobe LiveCycle Designer 7.1 including the patch.
Regards
Michael
com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException: ../../vitra.com/invests/InvestApproval/~wd_key120_1225194243347/Error+PDF.pdf?sap-wd-download=1&sap-wd-dl_behaviour=1&sap-wd-cltwndid=b00e34d1a4e511ddc2780011855f4200&sap-wd-appwndid=b00e34d2a4e511ddca990011855f4200&sap-wd-norefresh=X
    at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:406)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:895)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to GENERATEPDF
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:419)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)

Check the following:
Form - Properties - Layout Type = ZCI
Checkbox -> Object Palette -> Binding Tab
On Value
Off Value
By default Adobe has on value = 1 and off value = 0.
What do you have in your context (X/space or 1/0)
If you have X and space in your context, change in adobe.
Regards,
Reema.

Tooltip doesn't show with own component

Hello,
I have my own component that paints some rectangles to a
canvas. Now the problem is that I can't see the tooltip over my
object. Here is wat I do
var record:SessionRecord = new SessionRecord();
record.height = TIMELINEHEIGHT;
record.width = data.SESSION_TIME*TIMELINE_SECOND;
record.x =
((data.SESSION_START_SEC*TIMELINE_SECOND)+MARGINLEFT)/2;
record.y = yCanvasPointer/2;
record.toolTip = "blabjdsqodhqhjiouqh";
record.enabled = true;
canvas.addChild(record);
I've implemented the get/set method of the tooltip in my
component class (actionscript class).
public override function get toolTip():String
return this.tooltipText;
public override function set toolTip(value:String):void
this.tooltipText = value;
Anybody any idea ?
Thanks!
Ward

quote:
Originally posted by:
Greg Lafrance
The FB3 help topic "About creating advanced components"
mentions the following about Flex components implemtning the
IToolTipManagerClient interface:
IToolTipManagerClient - Indicates that a component has a
toolTip property, and therefore is monitored by the ToolTipManager.
So maybe if you implement this interface you will have
tooptip support.
This is the interface I implemented (specifying the get/set
tooltip methode)...

Setting image over the checkbox of JCheckBox

hi everybody,
I m new new to the forum so dont know about any rule but I am in trouble to setting image over the check box in JCheckBox(not side of the checkbox). I just want to cover the checkbox by some icon. I just wanna know is it possible? if ya how? it will be great help to me.
thanks in advance for any kinda suggesion.

Hi sudip;
use JCheckBox(String text, Icon icon); to display icon instated of checkbox. and to differ checked & unchecked box use setSelectedIcon(Icon) on checkbox object to display some other icon whenever box is selected.

Text Field and Checkboxes

Ok... i wish i can show my form without letting everyone have axx to it.
But anyway, ive searched and i think i found part of the answer but i am still confused. http://forums.adobe.com/message/2033382#2033382
I have a form created completely. It has radio fields, text fields and checkboxes. I have two problems
One when ppl are typing in the text field area, it seems to lend in with the question, so if not paying attn, u wont know that they answered a question.
Currently i have the stuff set at Myriad Pro size 10.. Thats what i used to type comments and what not.
But when the end user flls out the form, i want it to at least be in bold or something.. Or maybe Times new roman Or something different from the question font itself.
Two.. in checkboxes, the default is X. Thats very light. I need that to be noticeable... So either make em a bod X or a way to increase the size of the tick without increasing the size of the box itself.. I just tried to use the STAR..And its bold enuf, but its small. It would be better if the star was a lil bigger.
Currently i think i have 150 checkboxes and about 50 text area and fields.
I thought about making the text thing rich format, but they cant do that for every field... id rather tdo that by default in the back end of the form itself.
I hope im not sounding confusinf

i know the square and circle are a bit ugly - but there is no chance you'll miss them
alternatively try adjusting the size a bit under -size you can take a standard checkboxes size from 10 to 12 without increasing its area for example - select the checkbox-objects-field-size - change to 12 eg - adds a bit of weight
i use squares when i need visual weigh -
for the text - might be worth having a test at setting input field values with a baseline shift -- thats basically make text bigger or smaller than, you guessed it, baseline -- this from the livecycle scripting reference
TextField1.font.baselineShift = "+5pt"; should do it for example --
scripting reference follows --- good luck
""baselineShift
Specifies a positive measurement that shifts a font up from the baseline or a negative measurement that
shifts a font down from the baseline.
Syntax
Reference_Syntax.baselineShift = "0in | measurement"
Type Values
String ● fit (default)
The application scales the image proportionally to the maximum size of the container’s
content region.
● none
The application scales the image to the size of entire container’s content region. This may
result in different scale values being applied to the image's X and Y coordinates.
● actual
The image is rendered using the dimensions stored in the image content. The extent of the
container’s region does not affect the sizing of the image.
● width
The application scales the image proportionally to the width of the container’s content
region. The image might be taller or shorter than the content region.
● height
The application scales the image proportionally to the height of the container’s content
region. The image might be wider or narrower than the content region.
Model Object
Form Model image
Adobe LiveCycle Designer ES Scripting Properties
LiveCycle Designer ES Scripting Reference before 156
Values
Applies to
Version
XFA 2.1
Examples
JavaScript
TextField1.font.baselineShift = "-5pt";
FormCalc
TextField1.font.baselineShift = "-5pt"

Multiple ToolTip issues

hey all. i'm trying to set up custom tooltips for multiple
objects in my flash movie. it seems like it should be simple, yet i
keep hitting walls. i've got it set up like so:
two buttons with two different movie clips set near them
(these are the tooltips). the first frame of the whole movie has
this code:
ToolTipA.startDrag(true);
ToolTipA._visible = false;
ToolTipB.startDrag(true);
ToolTipB._visible = false;
which should enable mouse following for both movies, and
render them initially invisable. yes? the buttons then have this
code:
on (rollOver) {ToolTipA._visible = true;}
on (rollOut) {ToolTipA._visible = false;}
which makes the tooltip appear and dissappear on those mouse
events. the visability code works fine, but only the more recently
placed tooltip has dragging properties. the other just appears
where it was set and sits there.
please, i have no idea why this is and have searched for days
to try and find an answer. i'm sure it's something simple (i'm no
actionscript expert) and would really appreciate someone helping me
out with this.
thanks very much,
morgan
www.dangerboydesign.net

What you may want to do is to have some AS in the movie clip
(ToolTipA) such as an onEnterFrame,
if (this._visible = true){
this._x = mousex + 5;
this._y = mousey;
I don't think this code is right so you should look up the
mousex and mousey in the help menu.
I don't think you want the tool tip drag able just to follow
the mouse.

CheckBox - how to set custom icons

I need to figure out how to set a custom icon for a selected checkbox via the UIManager
This works for un-selected checkboxes:
UIManager.put("CheckBox.icon", new ImageIcon("../images/unselectedCheckBoxIcon.png")));
how to change the icon when it is selected?
I don't know the UIManager property for a selected checkbox icon and using the setSelectedIcon on the checkbox object it self does not seem to work:
checkbox.setSelectedIcon(new ImageIcon("../images/selectedCheckBoxIcon.png"));
Thanks for any ideas how to solve this!!

Hi mKorbel, many thanks for your suggestion!
For anyone interestsed,
here is a small example of how I made it working.
Unfortunately I cannot attatch the icon images that I use, but the selected icon can be downloaded from here, resize it to 32*32, remove the cross in the middle to save it as the unselected icon.
* Modified sample code taken from here
* http://www.java2s.com/Tutorial/Java/0240__Swing/CustomizingJCheckBoxCheckMarkIcon.htm
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.Color;
import java.awt.Component;
import java.awt.Graphics;
import java.awt.GridLayout;
import java.net.URL;
import javax.swing.AbstractButton;
import javax.swing.ButtonModel;
import javax.swing.Icon;
import javax.swing.JCheckBox;
import javax.swing.JFrame;
public class IconCheckBoxSample {
public static void main(String[] args) {
        JFrame frame = new JFrame("Iconizing CheckBox");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Icon checked = new CheckBoxIcon();
        Icon unchecked = new CheckBoxIcon();
        JCheckBox aCheckBox1 = new JCheckBox("Pizza", unchecked);
        aCheckBox1.setSelectedIcon(checked);
        JCheckBox aCheckBox2 = new JCheckBox("Calzone");
        aCheckBox2.setIcon(unchecked);
        aCheckBox2.setSelectedIcon(checked);
        Icon checkBoxIcon = new CheckBoxIcon();
        JCheckBox aCheckBox3 = new JCheckBox("Anchovies", checkBoxIcon);
        JCheckBox aCheckBox4 = new JCheckBox("Stuffed Crust", checked);
        frame.setLayout(new GridLayout(0,1));
        frame.add(aCheckBox1);
        frame.add(aCheckBox2);
        frame.add(aCheckBox3);
        frame.add(aCheckBox4);
        frame.setSize(300, 200);
        frame.setVisible(true);
class CheckBoxIcon implements Icon {
public void paintIcon(Component component, Graphics g, int x, int y) {
    AbstractButton abstractButton = (AbstractButton)component;
    ButtonModel buttonModel = abstractButton.getModel();
    if(buttonModel.isSelected())
        g.drawImage(createImage("../images/selectedCheckBoxIcon.png","info"), x, y, component);
    else
        g.drawImage(createImage("../images/unselectedCheckBoxIcon.png","info"), x, y, component);
public int getIconWidth() {
    return 33;
public int getIconHeight() {
    return 33;
protected static Image createImage(String path, String description) {
        URL imageURL = CheckBoxIcon.class.getResource(path);
        Image icn = null;
        if (imageURL == null) {
            if(null==icn){
                //System.out.println("path: "+path);
                icn = new ImageIcon (CheckBoxIcon.class.getResource(path.replace("..",""))).getImage();
                if(null!=icn)
                    return icn;
                else{
                    System.err.println("Resource not found: " + path);
                    return null;
             return null;
        } else {
            return (new ImageIcon(imageURL, description)).getImage();

Input checkbox confusion

When inserting a checkbox in a form, Dreamweaver creates the
following:
<input type="checkbox" name="myCheckbox" value="">
What is the value for?
I looked at the w3c school checkbox object info, and their is
no mention of a value attribute for
checkboxes.
That's quite logical, since a checkbox value simply returns
"on" or "off" if the checkbox is checked
or unchecked.
However I am in a situation where I could use the value to
pass extra information that I cannot pass
through the checkbox name, because that information contains
special characters (it would be a
descriptive sentence, with punctiation and sometimes "/"
chars or $ or quotes, etc.) and names
cannot contain white space or special characters...
So, what's the deal with the checkbox "value"? Is it
something I can use? isn't the checkbox "value"
either "on" or "off" anyways, whatever I could write in the
value="" attribute?...
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

(_seb_) wrote:
> When inserting a checkbox in a form, Dreamweaver creates
the following:
>
> <input type="checkbox" name="myCheckbox" value="">
>
> What is the value for?
<input type="checkbox" name="readSmallPrint"
value="yes">
If checked, this is passed to the server as:
readSmallPrint=yes
If not checked, nothing is passed to the server.
See?
Mick
> I looked at the w3c school checkbox object info, and
their is no mention
> of a value attribute for checkboxes.
> That's quite logical, since a checkbox value simply
returns "on" or
> "off" if the checkbox is checked or unchecked.
>
> However I am in a situation where I could use the value
to pass extra
> information that I cannot pass through the checkbox
name, because that
> information contains special characters (it would be a
descriptive
> sentence, with punctiation and sometimes "/" chars or $
or quotes, etc.)
> and names cannot contain white space or special
characters...
>
> So, what's the deal with the checkbox "value"? Is it
something I can
> use? isn't the checkbox "value" either "on" or "off"
anyways, whatever I
> could write in the value="" attribute?...
>

Eclipse: How to add checkbox on screen

Hi,
I am working on Eclipse, can u please give me example how we can create Checkbox.

Hi Nishant ,
Follow the API documentation of SAP UI 5 for all the simple and complex controls.
Here is the link for the checkbox control - CheckBox - SAPUI5 Demo Kit
Example :
// create a simple CheckBox
var oCB = new sap.ui.commons.CheckBox({
text : 'I want to receive the newsletter',
tooltip : 'Newsletter checkbox',
checked : true,
change : function() {if(oCB.getChecked()){alert('YES')}else{alert('NO')};}
// attach it to some element in the page
oCB.placeAt("sample1");

Tool tip throwing error

Hi
I have a code that dynamically creates checkbox objects after reading a XML file and at the same time when I say JCheckBox obj = new JCheckBox(name) im also assigning the tooltip as obj.setToolTipText(name)
the code seems to be working fine and all the check boxes are also displayed with the name as shown on the checkbox but when I hover the mouse over the checkboxes it throws the exception java.lang.Error: Destination component not connected to component tree hierarchy
that too not allways.. sometimes the code works fine and sometimes it gives error
rgds

com'n guys...Where are we going?

How to filter check box values in WAD.

Hi Gurus,
In my WAD i am having check box and the object name is defined as 0SEM_CGCOMP, it is a master data info object and having values like CG1,CG2,CG3....CG10. But i want to restrict the values to CG1,CG2,CG3,CG4 only. how can i filter the values?
</object>
</td>
          <td class="SAPBEXHLevel2"><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="CKBOX_CONS"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_CHECBOX"/>
         <param name="DATA_PROVIDER" value="DP_1"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         <param name="WIDTH" value="240"/>
         <param name="GENERATE_LINKS" value=""/>
         <param name="IOBJNM" value="0SEM_CGCOMP"/>
         <param name="SHOW_LABEL" value=""/>
         <param name="TARGET_DATA_PROVIDER_1" value="DP_1"/>
         <param name="HORIZONTAL_NUMBER" value="5"/>
         ITEM:            CKBOX_CONS
</object></td>
Thanks
Raju.k

Hi Raju,
Try this. Create another dataprovider within your web template? This new dataprovider refers to a similar query, but this query definition should restrict values CG1, CG2, CG3 and CG4. Assign this dataprovider to your checkbox. Then make sure the properties of the checkbox affect all other dataproviders.
Also, if this list is static, you could create an HTML checkbox object coding the options (cg1, cg2, cg3, and cg4) programmatically. Then add javascript code to produce the proper filtering based on the users' selections.
Let me know what happens.
Larry

Tooltip on checkbox object in table_column

Similar Messages

Maybe you are looking for