Toshiba 24LV411U TV/DVD combo turns off

I have a Toshiba 24Lv411u TV/DVD combo.
When turn it on the red light turns green for about 10 seconds then it turns itself off again.
I unplugged it for a few months...went back to it today and it worked fine for a few hours.
Now it's back to the same old turning itself off again.
Any ideas?
Thanks

Toshiba 24LV411U is not known to me but from my point of few its hardware malfunction.
Maybe something wrong with main board or other electronics parts.
Sorry mate but I think its impossible to say whats wrong exactly without detailed check.

Similar Messages

22CV1000 Toshiba LCD TV/DVD combo: Sound but no display

I am having problems with my 22CV1000 Toshiba LCD TV/DVD combo!
When I turn the tv on, it sounds like it is trying to read a DVD. The display appears for second, but then goes black. I still have sound, just no display.
The Toshiba help line told me to unplug and replug the tv - but that did not help.
I would really appreciate your advice!

At this point, I think you should call support back. It sounds like it might need a repair.
- Peter
- Peter

Toshiba 32LV67 tv dvd combo wont turn on/Disc light blinks repeatedly

I have the 32LV67 dvd combo and the disc light just keeps blinking when i plug it in. i read somewhere that you can re-install the firmware but i cant find it anywhere. Please help me!

There is no firmware downloads for that model.
Try leaving it unplugged from power overnight. If the problem persists, it may require servicing.
- Peter

Toshiba laptop turns off randomly when moved

Hi,
I have a Toshiba Satelite C655 that randomly turns off when moved. In fact, it will not boot back up unless I remove the battery entirely, hold down the power button for 20 seconds, then put the battery back in. Then it boots up fine.
Like I said, it randomly happens when it's bumped or moved.
Any ideas what this could be? We took everything except the processor out and put it back in to ensure nothing was loose.
This laptop has been very rarely used and is in mint condition besides this one flaw.

I hate random problems. They are the hardest to diagnose and take the longest time to figure out. I agree, it sounds like a loose or intermittent connection. But if you have gone in and reseated all of the connections and made sure that the cables are in straight, etc, it could be a defective connector, cable or component. Again, going to take time and effort to figure out which part or piece when moved or bumped is at fault. Either put in the time and effort to figure it out or consider turning this computer into a 'desktop', where it won't be moved or bumped. Same location always with an external monitor, keyboard and mouse.

Cannot wake up screen afer turned off by Power Saver on Tecra M5

Tecra M5; XP SP2.
Screen saver disabled.
Toshiba power saver set to turn off monitor after 10 minutes.
Once turned off, I cannot get monitor to turn back on.
I have tried various combinations of fn and function keys but to no avail.
Only solution seems to be to send to hibernate (power off button is set to hibernate).
Screen lights up to say hibernating and works fine after restart. Not a critical error but very irritating

Hi,
For this problem exists a Microsoft Quickfix: http://support.microsoft.com/kb/917332
To download you can for example google for it.

My Satellite A300 turns off spontaneously

Hello,
Somtimes my laptop (Toshiba Satellite A300) sunddenly spontaneously turned off. Very often it happend during system startup. Everything it happend when my laptop work only on power supply. When my laptop work only on battery (without power supply) everything is ok.
1) Does it mean that i should change the power supply?
2) I use surge protector but my power socket is without graunded. Is it possible that power socket without graunded broke the power supply?
3) Should i use power socket only with graunded?
I live in Poland if there is any help.
I will be gratefull for answers.

Hi Reda,
from my point of few it’s difficult to say what could cause this annoying issue.
But I think you should check the notebook functionality using another good working AC adaptor.
It’s not impossible that a faulty AC adaptor would cause the problems.
At the other hand the issue might be caused due to power supply electronic issues.
Power supply electronic is part of the motherboard and such issue would be the worst case.
Additionally you can check whether different power plant would be selected after connecting the AC adaptor. In such case switch it to the power plan which is selected using the battery power.

Satellite A110-160 turns off by itself when im making a dvd to divx conversion

My Toshiba A110-160 turns off by itself(abruptly) when im making a dvd to divx conversion(autogk for example).
This didnt happen before..
I am using an updated bios v1.7(the latest).
Do you think it is because of that?? I have also made a memory upgrade(2GB,667mhz) and I am using windows xp and ubuntu.
Any ideas?

Hi there,
I don´t have any clue why the machine shuts itself off and I cannot give you a quick solution but I can give you a thought how to make some accurate troubleshooting:
Remove the newly installed module and try it again. Then give some feedback if it worked. If not we have to discuss further on that issue, would appreciate some feedback from you.
bye

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

How do I turn off computer monitor when watching DVD movie on TV monitor?

I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen? Thank you. Dale

Dale H. Eckerman Jr wrote:
I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen?
That's impossible. It can only be done on a laptop but not on an iMac.

In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Toshiba M645 laptop turns off without reason

I have been dealing with this problem for about 4 months. It has been seen by some technicians and never found the cause. Some thought it was due to the settings in the power options either by what the lid does, or when it should go to sleep mode, and disabled it, but the nobody fixs it. Sometimes it would happen a couple of minutes after starting it, so heating problems are not involved. Some other times I would be working on bat only and it does it once, I turn it back on and continues to run normal. Some other times, It shuts down like three times in a row, and for no reason stops doing it. One techinician said it could be motherboard problems, and I starting wondering why I bought a Toshiba laptop, if supposedly I was buying top of the line product, recommended by some friends, and now I beleive Toshibas are causing a lot of trouble. Specially if a laptop is just one and a bit year old.
I am really disappointed. Maybe some other owners of M645 can help me

When you say that it has been seen by some technicians, do you mean you returned it to Toshiba under warranty for service, or that you had it looked at locally by a 3rd party?
When it shuts down, is it a hard shut down where it just turns off, or does it go through a proper shut down? When you restart, do you get any error messages?
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie. Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me. I tried turning off all my firewall

Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie. Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me. I tried turning off all my firewall settings.? IDK if I'm even doing that right. Can anyone help out here?

You don't need Handbrake for that if it is your own DVD.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle.
a DVD is in a compresed format called mpeg2, which is standard across all DVDs. This is what is known as a 'final delivery format' and is not suitable for editing. Because is is compressed, a 4.7GB DVD can hold a two hour movie (dual layer DVDs twice that), whereas the DV stream from a video camera, which runs at about 13GB per hour, is not compressed and IS intended for editing.
In other words you have to 'reverse engineer' the DVD back to an uncompressed format in ordfer to edit it. There is a penalty for doing this in terms of slight quality loss, but it is one you can live with.
When you have your DVD as an icon on your desktop, double-click it, and it will open to reveal a TS-Folder containing a number of various files, some called VOB. These are the constituent parts of any video DVD.
When you have downloaded and installed mpegStreamclip, and purchased and installed the Apple mpeg2 plugin, open mpegStreamclip and drag the entire TS Folder into its window. Then using the various menus available to you (just explore them and you will get the hang of it) ask it to convert to DV.
That DV file, which will be many times larger than the original TS Folder, and which can a while to create (be patient - make coffee or prune the roses!) is what you can now import into iMovie for editing etc.
When you have finished doing that, you then have to turn the project back into a DVD.
mpegStreamclip can be downloaded from here:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Toshiba Qosmio x775 Randomly Turns off and on itself.. PLEASE HELP!

Whenever I turn on my Laptop Toshiba Qosmio x775..it randomly turns off then turns on itself..sometimes for just 20-30mins or sometimes less than or sometimes in can run the for many hours..the problem is not with the Adapter because i try to put the battery and unplug the adapter and still it happens randomly..dunno whats the problem with this..
Mostly i researched..they said it's overheating..they said to check if the fan is full of dust something like that..but none of it works..I downloaded a program CoreTemp to check the Temperature for overheating issues..and it's only on 45-50 degrees..and that program has overheating protection to shutdown if it reaches 90 degrees..but in my case in does not reach that degree and still shuts down..hayy..need help badly..

SO FAR SO GOOD FIX GUIDE-
If you own a Toshiba Qosmio laptop and you are having problems with it powering down for no reason, try this.
1) Unplug all the wires and remove battery
2) Hold down power button for 30 seconds
3) Plug everything back in and start it up
4) Hold F2 to enter boot menu
5) Go to the Advance Tab
6) Set Execute Disable Bit to Not Available
7) F10 to save and exit
SO FAR SO GOOD!

I bought a LG slim portable dvd writer. I have gotten it connected, and it seems to have downloaded the drivers but then it turns off and I cannot even get the driver CD to eject because it turns off completely.

I bought an LG Slim Portable DVD writer. I connected it to my MacBook Air and the drivers seemed to download. There is an icon that says SuperMulti on my desktop. The portable drive comes on when I double click on the icon, and I hear the drive running. It turns off about 5 seconds later and I cannot even get the driver disc out because the drive is off (no green light).
I am not savvy. What do I do? It says it is compatible with Mac, but then in another place in the directions it states Windows is needed. Please help an old feeble woman!

You need to contact the DVD writer manufacture/vendor customer support and/or read its user manual. LG is not an Apple product.

Turning Off An Audio Track From Finished DVD Menu

Hi, Folks. I asked this question a couple of years ago, perhaps it has been included in recent upgrades.
I use Premiere Elements 11, happily, to make family activity videos. I would like to have a menu option on the finished DVD to turn on or off the narration track. I see other uses, for example, the music or background noise could be optioned for viewer preference. If PE will not do this, is there a comparably priced alternative? Or, could I make the video in PE and author in another program? I imagine a high end program would include this feature, but there is no income in this for me, so I'd rather spend money doing things that provide footage to make movies of instead of software purchase.
Thanks in advance.
Duke

Duke
Nothing has change with regard to Premiere Elements (any version) and obtaining from it a DVD-VIDEO on DVD that gives the viewer the option to listen to it with or without narration that was included in the project. You would do best to do a 2 disc production for this - one with and one without narration.
The idea to have both versions on one Timeline is possible (and we can give you detail how to on that for an appropriate Adobe menu design), but it is space consuming especially if you are dealing with a large project. Are you prepared to go from DVD disc spec'd at 4.7 GB/120 minutes (in reality 4.3 GB) to DVD disc spec'd at 8.5 GB/120 minutes (in reality 7.95 GB) to accommodate this approach?
As for alternative video editors and their disc menu options, I am not aware of one that could do what you seek.
Please let us know if we can be of assistance with a step by step on setting up Adobe disc menus (as is) or customized to deal with the two versions on one Timeline idea.
Thank you.
ATR

Toshiba 24LV411U TV/DVD combo turns off

Similar Messages

Maybe you are looking for