Toshiba flash card not responding

I have had my laptop for several years and lately I've been frequently getting the pop-up message 'Toshiba flash card not responding'. It's almost impossible to click away this message. I think there's a relationship between this and the fact that Internet Explorer is slow to start up and sometimes stops running for no good reason when I am online.
How do I fix this?

the toshiba flash cards are the cards that appear at the top of your screen when you rollover it or when you perform a function using the FN button and any of the F keys them not functioning will not cause any problem with your internet explorer but whatever caused the Toshiba flash cards to not work might be making your IE not work

Similar Messages

Equium A100-338 - Flash Card not Responding

Everytime I close down World of Warcraft something pops up in the top left hand corner (looks like it should be a window but only top bar showing) which reads 'Toshiba Flash Card (Not Responding)'. What can I do to stop this from happening?
Im pretty sure it pops up throughout the game as well as I hear a ding.
I have a Equium A100-338.
Thanks for any help!

Hi,
a solution can be disabling the flash card service if you dont need your flash drive.
You can disable it just by following these steps:
- Go into Start -> settings -> Control Panel -> Administrative Tools -> Services
- Make a right click on "Smart Card" and left-click on "Properties"
- In the window which pops up you have to stop the service and disable it with choosing "Disabled" at the option "Startup Type"
After that your flashdrive service is disabled and you wont get that annoying errormessage anymore.
(I hope so :O )
Greets

Runtime error R6025 message after log on to Vista - Flash Card not working

Hi
I'm a newbie & would appreciate any advice.
I am getting a runtime error message R6025 when I log on to Windows Vista.
When I click out of the box I then get a message saying Toshiba Flash Card not working.
I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
Sorry if I sound thick
Thanks
Neelie

Hi
I found this MS knowledge base article:
+Description of the R6025 run-time error in Visual C++\+
http://support.microsoft.com/kb/125749
But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
Bye

Flash file not responding if more than 1 flash file.

product : Adobe Flex Builder ver 2.. HELP required urgently..
I'm very new to Flex. in my adobe FLEX page, i'm displaying 2
flash file (.swf). the flash file itself pop-up data based on click
on the adobe flash file. however only 1 flash file (first flash
file) responsds and 2nd flash file loaded but NOT responding to
click and no data pop-up in the 2nd flash file.
However, if i change the order of FlashLoader2.load("file"),
the 2nd flash file responding and the 1st flash file not
responding. so, we can conclude that flash file is ok. anything
need to change in adoble flex???? pls help.
thanks

ar tech,
I think that your problem is to do with layering. You have
specified both loaders to have width and height 100% so (unless
there is more to your code than you have posted) they will sit on
top of each other. In that case unless you have done some clever
code to pass on the mouse request, it will get swallowed by
whichever one is on top (hence the change of behaviour when you
alter the order of loading).
It sounds from your description as though they actually sit
in different screen areas, so maybe try changing the location
parameters and see if both respond when you put them side by side.
Richard

Tecra S5-14R: Toshiba Flash Cards stops working: Runtime Error R6025

Hi all.
Hardware: Toshiba Tecra S5-14R
I have a problem with Toshiba Flash Cards software.
When it starts I've received an error "R6025 - pure virtual function call", and then the microsoft alert that Toshiba Flash Cards software stopped working
I'm using Windows Vista Business 32 bit OS, and I've downloaded new version of Toshiba Flash Cards software (v.2.00.05), but it doesn't solve the problem.
Could somebody help?

Hi
It seems that this error is known to the Microsoft support people and therefore they have published a knowledge base article.
Such error appears also if you would run the software Microsoft Money.
Please try the steps described here:
[Runtime Error: "R6025 -Pure virtual function call"|http://support.microsoft.com/kb/240437]
I would recommend doing this:
1. Disable the Flash cards
2. Click Start, type cmd in the Start Search box, and then press ENTER.
3. At the command prompt, type the following lines one at a time, and then press ENTER after each line:
- regsvr32 softpub.dll
- regsvr32 wintrust.dll
- regsvr32 initpki.dll
- regsvr32 dssenh.dll
- regsvr32 rsaenh.dll
- regsvr32 cryptdlg.dll
- regsvr32 gpkcsp.dll
- regsvr32 sccbase.dll
- regsvr32 slbcsp.dll
4. Enable the Flash Card Utility again

Toshiba "Flash Card" problem

1 out of 3 times I boot up my computer, after vista fires up I get an error that Toshiba Flash cards has a problem. Then windows flies off to go seach for a solution and always comes back with none.
Meanwhile, while this 2 minute dance is going on, no other app can be launched. Or, if you do launch a browser or email application, it will freeze up.
Thus far, no upgrades to Vista have solved the problem nor have any Toshiba updates.
Anyone have an idea how to fix this?
Thanks!
Tom

hi tom!
if you already did updates, uninstalled & reinstalled toshiba utilities but still have the problem, try restarting to safemode w/ networking. download toshiba utilities again & install it on the computer. but in case you still have issue, you can disable startup & services options on system configuration utility. in Run box type msconfig. go to the services tab, click the box at the bottom that says hide microsoft services & at then click on disable all. go to startup tab & then click on disable all. close the window & it will ask you to restart the computer. this is just a workaround to isolate your computer from locking up. to undo changes, just enable services & start tab on system configuration utility following same steps above. the exact resolution for this is backing up your data & performing recovery using original recovery cd for this laptop. have a nice day! Ü

LR CC launches then freezes at flash screen, Not Responding status. have reinstalled, signed out and back in etc etc.

LR CC installed successfully. Launch, get upgrade catalog pop up, ok, Process. LR then launches then freezes at flash screen, Not Responding status. Have reinstalled, Signed out and back in etc etc. Have let it run for several hrs, no joy. Now have 9 catlogs from doign this 9 times. PS CC works fine.

I have found a solution somewhat. Not ideal, but working.
uninstalled and reinstalled for second time. Signed in to CC app, then signed out. Then opened LR CC, signed in from within that (not the CC app), the upgrade catalog pop up came up (again), then LR CC launched and worked fine, albeit bit sluggish.
signed out of LR, signed back in the CC app, lauch LR, it froze at splash screen. So tried LR5 whilst signed into CC app, it froze as well at splash screen.
SIgn out out if CC app, restart PC, launch LR5 without going through CC app, works fine. Tried LR CC direct, works fine. Tried again after sign in through CC app, froze.
so my issue appears related to the CC app.
after all this stuffing about, I am now up to catalog 13 !
so I have a solution for my problem, not ideal, but works.
two hrs in Adobe chat line did not proved the resolution.

How to disable Toshiba Flash Cards pop-up?

Hello!
I have a question:
when i hover my mouse on the upper edge of the screen, a series of shortcuts for different settings appear, like Mute, Lock, Power Plan, etc...
It's really annoying when i watch movies, because i can see a thin white line in the upper edge... so i want to know if i can somehow disable these icons? so they don't appear? i don't use them anyway so...
Here's a screenshot to make it easier for you if you didn't understand my ramblings :)
http://img444.imageshack.us/img444/3656/25134904qm0.jpg
thank you!

Hi
You talk definitely about the Toshiba Flash cards and this feature can be disabled in;
Start -> All Programs -> Toshiba -> Utilities -> Settings for Flash Cards.
Check this and you will find the needed option.
Bye

Flash causes "Not Responding"

I am using Flash 15.0.0.239 on IE 11.0.9600.17420IS on Windows 7. Nearly every website I open with Flash enabled gets a "not responding" error including Adobe.Com. If I disable Flash, the websites work just fine. How do I fix this problem?

Hi, Try again- download and SAVE the Uninstaller to your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE the Installer to your Desktop:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Close all browser windows, disable any instant messengers in the system tray(area near the clock)
Disable McAfee
Run the Uninstaller and then restart your computer.
Check to make sure McAfee is still disabled.
Run the Installer and then restart your comptuer.
Re-enable your McAfee.
Test here and you should see the Flash Player logo(RedF) animate(spin) and the version of Flash Player should be 10.2.159.1
http://www.adobe.com/software/flash/about/
You can print this out to make it easier to follow.
eidnolb

Flash keeps 'not responding' when exporting .swf & file WAY too big

Hello!
I am creating an animation using ActionScript2 on Flash Professional CS5 and whenever I try to export (or even test) my animation, the progress bar comes up but the progress does not move. Then after about a second the dreaded '(not responding)' appears at the top of the window and if you click anywhere it greys out closes it.
If I leave it it doesn't export for ages (liteally like 3-6 minutes which is long for just exporting).
It only has 280 frames and the .fla file so far is 9.96MB! Other animations I have made have had double the frames yet 5 times smaller a file.
I have cleaned my registry many times (I thought that might be the problem or something).
I DO NOT UNDERSTAND! PLZ HELP!
Jerome

Bump

Toshiba flashcards does not respond on Satellite A200

Hi.
When I turn on my laptop (Satellite A200) often, but not absolutely everytime, I get a bar across the top of the screen which reads 'Toshiba Flashcards (not responding'.
Sometimes this can be removed by clicking the red cross in the corner of the bar and after a few moments it does disappear, but other times it stays there and there appears to be no way of getting rid of it.
Can anyone help me with this problem?
You can probably tell from this that I am not a computer expert and simple language would be most appreciated!!

Try this:
Update the BIOS, which can be downloaded from the Toshiba website
Uninstall the Toshiba Value Added Package
Download and install the latest Toshiba Value Added Package from the Toshiba website

Flash is not responding constantly only when I open a more complex project

Hi all,
Originally, I downloaded the free trial of Flash Professional CC 2014 to work on a major project. As my project has become more complex, flash suddenly kept not responding. The issue is not evident when I work on the less complex projects.
I have tried giving the file more space by deleting other flash projects from my computer, as well as clearing drive space, but this has made no difference. The project file is 9.5mb in size.
I then downloaded the full paid version of Flash and the problem is still there.
I have narrowed the issue down to a complex symbol I created, it has multiple layers with around 150 seperate keyframes. The issue started around when I created this symbol, and now when i try to place the symbol into the scene, I am able to grab and drag the symbol, and when I try the program stops responding. Overall without touching the symbol the program is very slow and often stops responding because of simple actions. I hope not to recreate this symbol as that will take up more valuable time.
I hope someone can help as I have a lot more to add to the project.
Specs:
Windows 7 64-bit
Nvidia GeForce GT 525m
4gb ram
Intel Core i7

What is your anti-virus software?

FXO Card not responding

Hi I have a VIC2-4FXO card in my Cisco 2901 router and its not responding. i replaced it with another workiing card and still the new card didnt respond.
any advice anyone?
Thanks,
Surendra

hi,
yes, i can see it in my inventory and i am also seeing my PDVm in my inventory.
i dont have anything else on the router that is using dsp resources.

Flash CS4 not responding on close

Lately I am unable to close Flash without an error that the program is not responding. I can close files, and they will show in the recent file history, but when I close the program itself, it shows a white screen only. In the task manager it shows that it is not responding.
When I tried to poke around a little, I found that this error always occurred when I had used Actionscript. This was true for about 2 weeks. Then the problem worsened, and now, even if I just open Flash and close it again (without opening any file) it keeps crashing.
I've seen a post for Flash CS3 with no real answers to this problem. My hope is that someone (anyone) has an idea what might be causing this.
I am running Flash on an XP machine with sufficient processor and memory.
Thanks in advance...

I know this is a year old, but I am having the exact same issue. Flash CS4 on windowsXP 32bit...anyone?

TOSHIBA Flash Cards (AKA Hot Keys, Fn Keys) Operation

ok here is my issue, I have been searching for the last 4 hours, checking all these forums and doing everything they say with no luck at all. My Toshiba Satillite L775D S7340 was recently rebooted to factory specs. how ever now the FN key will not for lack of a better word, disengage. I can't type @ or any of my special chars. up on the numbers row it auto defaults to the FN key on. If I press FN and then the numer 2 I get a 2 and if I press FN + Shigt + 2 then I get my @ symbol but you should be able to turn this off. now yes I have gone into the bios by hitting F2 on boot and nope no setting to shut it off there. I even went in with the HWSETUP and when I went to keyboard the ONLY option it gave me was for wake-up on keyboard. no other options. and hey I even went and checked to make sure I downloaded the MOST CURRENT bios and tried to install it only to get told I was currently running the most current one already. THEN I went and downloaded the FN keys utility and tried to disable it that way, nope. I am at my wits end, please help me get this darn FN to shut off. and yes I tried FN+numlock and FM+shift+Numlock as well.... no help at all. please some one help me get this off so I can use my computer like normal people do! it is hard, I can't even type a 1 with out haveing to get all fingers and tose involved it seems. heck to type this out because I can't even use my space bar on the laptop I had to get another computer before I got upset. PLEASE HELP! I attached a picture of what toshiba says HWSETUP is supposed to look like, well mine doesn't have the top part at all

cbwilsha wrote:
Jerry, look (below) what I have in my Toshiba L775D Windows 10 Device Manager under Keyboards. I've never owned anything made by Lenovo. Lenovo I think is the Maker of the built in mouse. like it might be a toshiba but if you put an Nvidia graphics card in it, it is still a Toshiba laptop. I know Toshiba doesn't make the ram that is used or the hard drive. What I think it happening is that the drivers for the mouse are over laying and it is causing confusion. each part might have it's own manufacture so that might e who made this mouse or the best driver for the mouse is that driver. Though it does say Snyaptics TouchPad Driver on the website. I don't know, all I know is I did those steps as pointed out and my issue is resolved, agian have to do it each time a windows update is done but it does fix my issue and allows me to use the keyboard normally. Take from it what you will......

Toshiba flash card not responding

Similar Messages

Maybe you are looking for