Total jobs getting more for one record

Hi Gurus,
In the report if I filtered for one record, the result should be TOTAL job scheduled(Key Figure-ZITSCKF) = 1 but since I modified the record for 3 times on different DATES(Character - ZIBFDCH) it is showing as TOTAL job scheduled = 3.
In update rules I mapped the DSO object (ZIBFDCH) to Info Cube object (ZITSCKF), I written a formulae that--- IF( IS_INITIAL( /BIC/ZIBFDCH ), 1, 0 ).
Please help me regarding this issue, points will be assigned.
Regards,
Kiran A

Hi Kiran,
sice you have multiple modifications dates, what i think is, create intenal table sort baced on dates and read only one value for the combination of key fields like..DATES(Character - ZIBFDCH), DSO object (ZIBFDCH). so that one records for key combination will be updated to data target.
Regards
Daya Sagar

Similar Messages

RFC to XI File - can NEVER EVER get more than one record in Output file.

Hi guys
This might be related to my other post on File conversion but whatever I do I just can't seem to get more than one record in the output file
the payload from R3==> XI seems fine
for example
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:Z_XI_005_RFC xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <IP_CUSTOMER_HEADER>
- <item>
<CUSTOMERID>1000001</CUSTOMERID>
<COMPANY>One-time ship-to</COMPANY>
<SHORT_NAME>ONE-TIME</SHORT_NAME>
<STREET />
<STREET2 />
<STREET3 />
<STREET4 />
...... more data
</item>
then next customer master data and so on
- <item>
<CUSTOMERID>1000005</CUSTOMERID>
<COMPANY>ddfask</COMPANY>
<SHORT_NAME>;LK;L</SHORT_NAME>
<STREET />
<STREET2 />
<STREET3 />
<STREET4/>
etc etc until
<HKUNNR>60000</HKUNNR>
<SALES_REGION />
</item>
</IP_CUSTOMER_HEADER>
</rfc:Z_XI_005_RFC>
All I get on the Output target file
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_customer_header xmlns:ns1="http://avenue.com/xi/test">
<CustomerId>1000001</CustomerId>
<company>One-time ship-to</company>
<shortname>ONE-TIME</shortname>
.... more data
</ns1:MT_customer_header>
the <item> and subsequent records all seem to have vanished.
I must be doing something PARTICULARLY stupid as nobody else ever seems to have this problem -- I've tried almost every possible combination but still to no avail
The function module is passing a table to XI in the correct structure and the payload seems to be fine so what on earth is broken here !!!,.
Cheers
Jimbo

Thanks everybody -- it's working now
RFC call was passing data correctly
function z_xi_005_rfc.
""Local interface:
*" TABLES
*" IP_CUSTOMER_HEADER STRUCTURE ZAP_CUSTOMER_INFO_2
endfunction.
in debug mode table data was fine -- in this instance 3 records were being passed.
3 errors in mapping etc fixed (with help from SDN - thanks)
1) missing the ITEM level in the Data type (hence mapping)
2) needed 0:unbounded in the occurrence
3) also mapping Item====>Item was missing (sub fields were ok)
Points awarded
final file output ok output now ok (with 3 fields only for testing)
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_customer_header xmlns:ns1="http://avenue.com/xi/test">
- <item>
<Customerid>1000001</Customerid>
<company>One-time ship-to</company>
<shortname>ONE-TIME</shortname>
</item>
- <item>
<Customerid>1000005</Customerid>
<company>ddfask</company>
<shortname>;LK;L</shortname>
</item>
- <item>
<Customerid>1000010</Customerid>
<company>One Time Customer Test</company>
<shortname>SADFIWQEFG</shortname>
</item>
</ns1:MT_customer_header>
Now only the final problem to make file content conversion work.
Once again thanks --sometimes what seem trivial or simple problems take AGES to fix until someone else gives you a clue --that's why boards like SDN are great value.
Cheers
Jimbo

Get more the one records in procedure by using out parameter

Hi good evening every body,
how to get more the one records in procedure by using out parameter ,
give me one example of it.
regards
subba

Like this ?
SQL> set serverout on
SQL> declare
2    v_empno dbms_sql.Number_Table;
3    v_ename dbms_sql.Varchar2_Table;
4    PROCEDURE P1(p_in_deptno IN emp.deptno%TYPE,
5                 p1_out OUT dbms_sql.Number_Table,
6                 p2_out OUT dbms_sql.Varchar2_Table) IS
7    BEGIN
8      SELECT empno, ename BULK COLLECT
9        INTO p1_out, p2_out
10        FROM emp
11       WHERE deptno = p_in_deptno;
12    END;
13 BEGIN
14    P1(20, v_empno, v_ename);
15    FOR i in 1 .. v_ename.COUNT LOOP
16      dbms_output.put_line(v_empno(i) || '--' || v_ename(i));
17    END LOOP;
18 END;
19 /
7369--SMITH
7566--JONES
7788--SCOTT
7876--ADAMS
7902--FORD
7941--ABCDEFGHIJKLMNOPQRSTUVWXYZAAAAAA
7942--MY#@ ' "ABC
PL/SQL procedure successfully completed.
{code}

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

Is it possible to retrieve report for more then one record at Bi Pub

is it possible to retrieve report for more then one record at a time using BI Publisher on siebel Application

Hi Sudhir,
We have tried this.
I think currently you can query for records you want on UI and run report , then you can see the result set of query in report.
But i think in future releases of BIP the feature to run a report for selected & Multiple Selected records will be provided.
Thanks,
Vamsi

How to concat columns from more than one record?

I have a function that takes an Oracle long and returns it as a varchar so that I can use it in the Microsoft world. My problem is that the SELECT returns more than one row (which is valid) and I need the Long fields to be concatenated into the one varchar returned. Currently I get an error saying more than one record is returned. This is my function:
CREATE or replace function m4owner.Get_Request_Text
(av_REQUEST_ID varchar2, av_REQUEST_LINE number, av_TEXT_LINE_CODE varchar2)
RETURN varchar2
IS
long_var LONG;
BEGIN
SELECT TEXT INTO long_var
FROM M4OWNER.REQUEST_TEXT
WHERE REQUEST_ID = av_REQUEST_ID
AND REQUEST_LINE = av_REQUEST_LINE
AND TEXT_LINE_CODE = av_TEXT_LINE_CODE;
return long_var;
END;

CREATE or replace function m4owner.Get_Request_Text (av_REQUEST_ID varchar2,
                                                       av_REQUEST_LINE number,
                                                       av_TEXT_LINE_CODE varchar2) RETURN varchar2 IS
    long_var LONG;
BEGIN
    for t1 in (SELECT TEXT FROM M4OWNER.REQUEST_TEXT
                 WHERE REQUEST_ID = av_REQUEST_ID
                   AND REQUEST_LINE = av_REQUEST_LINE
                   AND TEXT_LINE_CODE = av_TEXT_LINE_CODE) loop
      long_var := long_var || t1.text;
    end loop
    return long_var;
END; note: untested

How to return more than one record through OUT parameter in procedure

Hi,
I want to create a procedure which accepts one input and returns more than one record as output.
example:
Input = DeptNo
Output= Empno,ename,sal,comm,job
Scenario:
There can be more than one employee in department we pass as the IN parameter. OUT parameter has to return all the records of the corresponding employee details in that department.
Thanks in advance for your help
Regards,
K.Vijay

-- I think you can try something like this using ref cursor:
-- create a package for the type ref cursor and execute
CREATE OR REPLACE PACKAGE PACK_REFCURSOR_FOR_TABLES AS
     TYPE DATA_TableRows IS REF CURSOR;
END;
-- after executing the package above, create your procedure:
CREATE OR REPLACE PROCEDURE GET_EMP (
     IN_nDeptNo IN number,
     OUT_Emp OUT PACK_REFCURSOR_FOR_TABLES.DATA_TableRows)
IS
BEGIN
-- leave query open (implicit) as this will return data
     OPEN OUT_Emp FOR
     SELECT *
     FROM tblEmp
     WHERE DeptNo = IN_nDeptNo;
END;
--execute the procedure and you're done

Pop to get more than one value of same type

Hi
I want to give pop up that can take 3 customer numbers
and export it.Problem with <b>popup_get_values</b> function module is that you cannot get more than one value of same type for example here <i>kna1-kunnr</i>.
Is there any function module to solve this problem.
Regards
Amol Deshmukh

Hi,
may be you can use knvv-kunnr for the second value ....
That should also do the job.
regards
Siggi

How to retrieve more then one record from database

I am doing a SELECT FROM WHERE SQL statement on a database which returns more then one record. I want to retrieve certain column values from the selected records. How do I do that? If only one record is returned, I know I can do a data operation with operation set to 'Get-Retrieve Values from Record' and Record to operate on set to 'Current-Use current record'. I need to find out how to configure to data operation window in the case more then one record is returned by the preceding SQL statement. Depending on the number of records returned, I can dynamically create array variables to store the 'to be retrieved' column values, just dont know how to retrieve them.
Any help will be greatly appreciated.
Thanks
Anuj

I apologize for not being clear in explaining my problem, perhaps I should have posted an example. Anyways, I was able to figure out the solution. I was doing an 'Open SQL' statement which was selecting multiple records (rows) from a table in the dB. I was storing the number of records returned in a local variable. Then, I wanted to retrieve certain columns of all the selected rows (records). In the "Data operation", I was choosing the 'Record to operate on' as 'Current-Use Current Record'. Changing this field to 'Next-Fetch next record' fixed the problem. I then retrieved the values of those columns into a dynamically created array variable whose dimensions came from the local variable which stored the number of records returned in the SELECT SQL statement.
Thanks
Anuj

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

Can I get more than one account on iphone microsoft exchange server

Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??

Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

How to apply data into 2 tables AND to more than one record in same table?

Hello,
I am trying to apply/insert data into 2 tables AND at the same time apply data to more than one record (in the same table). How would I do this in APEX?
I have updated using one table with no problem, however, when I try updating with the two tables/ multiple record sets, I get errors.
I appreciate the help.
Thanks.
Linda

You can achieve what you want using PL/SQL. Can you post ur code?

Wanted to catch more than one record in selected rows

Hi all,
I am using the following function to catch the selected rows.
CALL METHOD w_grid->get_selected_rows
IMPORTING
et_index_rows = i_selected_rows.
it is catching only one row.
but i want to catch more than one record.
for example i will select more than one record from the grid and press the approve button. so that the status will change in the database.
but what is happening is if i select 2 or more records it is approving only first record. because in the i_selected_rows only first row is catching. what i have to do to catch other select rows also.
thanking u.
regards,
giri.

Hi,
CALL METHOD w_grid->get_selected_rows
IMPORTING
et_index_rows = i_selected_rows[] ."<<<< try to put these into []
please not open multiple threads
a®

How can i select more than one record in a LOV

I want to select more than one record in a LOV and put them together before to display them in an item.

This is not possible with a default LOV, so you'll need to create your own. There are a number of ways to select multiple records:
a) you can use a tree and set Multi-Selection to Yes
2) you can use a normal block with a checkbox on each row for the user to select records
three) with the [SYSTEM.MOUSE_BUTTON_MODIFIERS|http://www.oracle.com/webapps/online-help/forms/10g/topics/designing_forms/mouse/at0604.html?tp=true] variable you can allow users to ctrl+click to select many records in a block. set the background colour to indicate a record has been selected
iv) there is a pjc in the [demo code section|http://download.oracle.com/otndocs/demos/Forms_Demos_10gr2.zip] which lets you select many rows in a poplist

Insert more then one record on a Form in a Data Block

Hi,
How can I Insert more then one record in the DataBlock of a Form in a WHEN_BUTTON_PRESSED trigger. In the Trigger I have given "commit" but it just saves the record once regardlessly how many times you press the button.
Thanks in advance
Khawar

Hi,
You said
"**In the Trigger I have given (commit) but it just saves the record once regardlessly how many times you press the button.**"
I think u want to batch mode insertion if m not wrong?
1- Use Insert statment instead of commit and then next record.
Begin
Insert into <table> values (:Blk.Val1,:Blk.Val2,:Blk.Val3,:Blk.Val4);
Create_record;
End;
2-Use another object say button for commit record.
Acknowledege me
Best regards
Khurram Siddiqui

Total jobs getting more for one record

Similar Messages

Maybe you are looking for