Totals in Pivot table

I have this pivot table in OBI EE.
It have the base amount per year and per month. With one total per year, with sumatory of Base amount.
Moth 2001 2002 2003
1 Base 4.206.068,79 4.817.526,27 4.315.587,17
2 Base 4.100.429,84 4.031.267,42 4.950.029,58
3 Base 4.404.968,15 4.356.915,33 5.147.919,34
4 Base 4.260.013,78 6.482.442,15 5.317.174,24
5 Base 4.885.129,07 4.600.874,08 5.532.471,30
6 Base 4.558.260,11 4.670.961,09 5.208.824,92
7 Base 4.766.663,43 5.929.013,00 6.123.468,84
8 Base 4.634.208,62 5.192.108,74 5.588.621,28
9 Base 5.011.952,41 5.013.715,37 6.076.325,09
10 Base 5.311.867,88 5.641.683,97 6.778.596,81
11 Base 5.852.338,40 5.975.394,22 5.337.782,70
12 Base 5.098.619,76 5.771.857,52 5.313.767,04
SUM Base 57.090.520,24 62.483.759,16 65.690.568,31
I want to show another total, showing the difference of the total base amount per year, and total field "Atipicos". this field "Atipicos" is not shown in the pivot table. "Atipicos" is a field in the fact table.
I created a calculated field with the difference between the base amount and the "Atipicos" field. But I dont know how to show the total field, without showing the "Atipicos" field in the pivot table..
If anyone can help me.
Gracias.
Moth 2001 2002 2003
1 Base 4.206.068,79 4.817.526,27 4.315.587,17
2 Base 4.100.429,84 4.031.267,42 4.950.029,58
3 Base 4.404.968,15 4.356.915,33 5.147.919,34
4 Base 4.260.013,78 6.482.442,15 5.317.174,24
5 Base 4.885.129,07 4.600.874,08 5.532.471,30
6 Base 4.558.260,11 4.670.961,09 5.208.824,92
7 Base 4.766.663,43 5.929.013,00 6.123.468,84
8 Base 4.634.208,62 5.192.108,74 5.588.621,28
9 Base 5.011.952,41 5.013.715,37 6.076.325,09
10 Base 5.311.867,88 5.641.683,97 6.778.596,81
11 Base 5.852.338,40 5.975.394,22 5.337.782,70
12 Base 5.098.619,76 5.771.857,52 5.313.767,04
SUM Base 57.090.520,24 62.483.759,16 65.690.568,31
SUM (Base - Atipicos) 50.085.520,24 56.432.759,16 59.605.568,31
This is a picture of how I created the pivot table.
If anyone can help me.
Thanks.
Edited by: user12014887 on 08-feb-2010 3:35
Edited by: user12014887 on 08-feb-2010 13:54

hi,
we too got the same request from the client.
we create another pivot table with same fields and displayed only the grand total column to the view and added that to the down of existing pivot table (separate pivote view) in the compound layout. it is another pivot view that shows the grand total...here in your case
SUM (Base - Atipicos) 50.085.520,24 56.432.759,16 59.605.568,31:
try in this way...
in my sense i didnt find another solution...if you find workaround then plz explain me aswell.
i hope its helps you...
Thanks,
mani.

Similar Messages

% of calculation in GRAND TOTAL in PIVOT TABLE

Hi Gurus,
I have a requirement to calculate the percentage based on the grand total in pivot table,but in row wise i am getting the percentage while in grand total level i am not getting correct values.I have tried with all the options like:average,Sum,Default,Max,Min,count etc and also with the percent of row,column,parent column etc.
Please give me a solution for this ASAP.
view of my table is
Previous Value||Present Value||change between Pres & Prev||% of change(((pres - prev)/pres)*100)
10||20||10||50%
00||01||01||100%
10||05||-05||-50%
here i should get values in grand total like
20||26||06||23%
but i am getting values when giving sum for %of calc in measures values
20||26||06||100%
if i give avg for %of calc in measures values then i am geting
20||26||06||33%
how to solve this prob.Can any one give sol plzzzzzzzz
Thanks,
Naveen

Hi,
Refer : http://www.skurabigroup.com/blog/?p=579
Regards,
Srikanth

Remove the word "Total" in Row Totals in Pivot Tables

Hi,
Is it possible to remove the word "Total" that appears in Row Totals in Pivot Tables?
Eg. If there are 2 Dimension Columns -- Year and Month .... and if we do row totals on Year
The total appears as *'2008 Total'* or *'2009 Total'* etc. i.e. Each of the Values is followed by the word 'Total'.
However, i would like the totals to display only the values '2008' or '2009' without the word 'Total'.
Is this possible in OBIEE 11.1.1.5.0 ?
Thanks,
Ab

Hi ,
Goto Total -> Format label and type in @.This will remove the word"Total". I have tested this in 10g, try this and let me know if it works in 11g.
Rgds,
Dpka

Navigation of Grand total in pivot table

I’m currently working in report development Oracle BI wherein I need to develop a report using pivot table. I need to do summation at both row and column level and when clicked on the Grand Total level it should display entire resultset. According to the data clicked the filter condition is passed on to next level of report, but it displays no results at total level as the filter is passed as the same name ‘Grand Total’(column heading) instead of the actual values.
Any pointers on this would be helpful to us.

i am experiencing the same proble.I hope you are creating calculated item and you are clciking on measure value corresponding to calculated item.In that case it will pass calculated item name to child report .Correct me if i am wrong.
I think it is not possible in that case to pass correct filters.Wait for others comments.
Regards,
Sandeep

Grand Total in Pivot Table

Hi, I have a pivot table with several measures and grand totals. The problem is that there is one measure where the totals show up incorrectly. By incorrectly I mean that this shouldn't be sum of rows, but a different calculation and I haven't found a way to define separate calculation for this total.
Is there a way to hide totals for this one measure? Or is it still somehow possible to use some different value/calculation in there?

In the Pivot Table I'm currently using sum, because I'm combining different queries with union. In the actual query these values are calculated by row using Count Distinct. Now in the total it just sums up individual Count Distinct values but the correct value should be Count Distinct for total data set.

Grand total in Pivot Tables with Paging

I could help with this issue please
when we apply paging PivotTables there a way to show Grand total all pages, and I've noticed that the Grand total vee only when the last page or show all results at once.
For me it is important to see the Grand total on every page.
Thanks in advance for your cooperation

If you're not talking about printing, then you can do this:
1) Instead of using the same pivot table that you created for details to also display the Grand Total, first paginate the pivot table. Look here:
Re: Pivot table
In your pagination, break your pivot table in groups such that you can see a small enough chunk without having to scroll too much.
2) Now that you have a manageable size pivot table, create the Grand Total as another pivot table. Take out all the attributes that break the total in detail and leave only what will give you the Grand Total.
3) Add this pivot table to the bottom of your detail pivot table in step 1. This will give you the grand total right underneath each page of your detail pivot table without having to go all the way to the end of the report.

Grand totals in Pivot table in OBIEE

Hi,
I have a pivot table in which i want both row and column level totals.
when i say summation-->after for both row and column i can see the totals but the column level totals are showing results(the row level totals are correct.)
Any idea what mistake I'm doing here?
I have one measure in my report, three fields in row and one one field in column.
Thanks in advance.
Regards,
RC

Change the aggregation rule to sum for the measure column
Phani.

Total in Pivot Table

Hi,
I have built a pivot table where due to the large number of resort, I created an extra column and
put the following formula
CASE WHEN RCOUNT(1)<16 THEN '1-15' WHEN RCOUNT(1) <31 THEN '16-30' WHEN RCOUNT(1)<46 THEN '31-45' WHEN RCOUNT(1)<61 THEN '46-60' ELSE '61+' END
The table groups number of nights by certain channel (OWS, ADS, GDS) and sub- channel
Row 1-15
OWS WEB1 3
WEB2 5
TOTAL OWS *8*
GDS 1A 6
UA 3
TOTAL GDS *9*
Basically is calculating the total on each page, instead the total of all OWS from all the pages in the last page.
I tried to place the total on section, page, measure level etc.. but I do not get what I want.
Any idea?
Regards
Giuliano

You have the "channel" column in the Rows section, yes? Then click on the "sigma sign" on the channels column. It will give you totals by channels which looks like what you want.

Could I add Cumulative Totals in pivot table?

for example
08-1-1 08-2-1 08-3-1
A 1 2 2
B 1 2 2
C 1 2 2
Total 3 6 6
CumuTotal 3 9 15

I add a cummulative column in a table.
In this column, I calculate the accumulated turnover for 2000 and 2001.
But the function don't stop at the end of the year 2000.
I want the function restart for 2001
Turnover : Accumulated turnover :
October : 5 : 5 :
2000 November : 5 : 10 :
December : 10 : 20 :
January : 6 : 26 : <= I want 6 for this value
2001 February : 20 : 46 :
March : 10 : 56 :
Thanks

Unable to do Grand Total in Pivot table view in OBIEE 11g

Hello Experts,
I am totaly new for OBIEE 11g
I have created a report and wanted to do row wise total. Simple grand total in OBIEE 11.1.1.5 version. While doing the summation 'After'. I am getting a Window internet explorer Pop-up Saying the following.
"Are you sure you want to nevigate away from this page?
The changes that u made on this object has not been saved. Click cancel to return to the editor where u can save the object.
Press OK to continue or cancel to return to the page".
I tried both option, but non of the options are working.
Please provide me a solution on priority because client is on head.
Thanks in Advance.
Niraj

Hi,
Its Permissions issue.can u please try to do it outside local mechine(just open IE8 then call the server url from outside ). i hope u tried inside server pc its limited permissions for logged in users thats why its not allowing to do edit the anaysis report.
let say u have DEV/UAT servers the application installed with some other users (admin group user or power user) while u r accessing and doing devalopment better to use outside browers .
Note: i have also faced same issues (IE8 browser security level permission in win 2008 server).solution u can just try to access the url from outside server.
Thanks
Deva

How to sort column totals in pivot view

Hello guys
I have a report in pivot view where I have put call type on the column section. So the report looks like below with SUM applied at the column section:
                                   Call Type1         Call Type2       Call Type3               TOTAL
ID                                        SALES TOTAL
A                                  100                  200                300                       500
B                                  200                  200                400                       800
C
D
EMy question, how do I sort the data in 'TOTAL' field? The challenge it seems is that since 'TOTAL' isn't a table column, but just a display of pivot Sum, it can't be sorted H-L or L-H..
But I'd like to have some advice from you guys before I make my conclusion
Thanks
Edited by: user7276913 on Jan 11, 2010 10:05 AM

You can't have the sorting on the total in Pivot table.
On a workaround,
you can create a column in the criteria which calculate the sum
SUM(sales_total by ID)Assign sorting order on this column
You can exclude this column in the pivot table
Regards,
Raghu

Sorting on a total column or calculated column in a pivot table

We have a pivot table showing customer activity by month. We have added a calculated field to show the YTD average instead of a total column. Is there a way to sort on this calculated field? We have applied a sort on the measure in the criteria, and our resulting pivot table sorts by the values in the most recent month, not by the YTD average.

I think we cant sort when we use a pivot view becoz all the rows are already fixed. Say your rows are sales and volume and columns are year 2007 and 2008, imagine if you r given the sorting ability then if number of units solds is more then it need to change the rows (but in pivot table rows are fixed). So, we cant sort in pivot tables!!

Hiding grand total value in pivot table view

Hi,
I have a pivot table in which i have 5 measures, out of these 5 measures i want to show the grand total for only the first one. How can this be done?
Thx

hi Phantasm, do as it is mentioned as kart.
IT WORKS FINE, put agrregation rule as none and take row total as after.........
take aggregation rule as NONE for last 4 columns ok......
TRY NEATLY ONCE..........IT WORKS
Thanks & Regards
J Rushi

Sub Total value is empty in parent child hierarchy pivot table

Hi All,
I am using obiee 11.1.1.6.2 in Test environment. Is it a known issue/bug for 11.1.1.6.2 to show empty/blank values for sub total when using parent child hierarchy pivot table. The sub total for parent value is showing but sub total for child value is coming blank. However, in 11.1.1.5.0, we do not have any issue with this.
Is it a known bug in obiee 11.1.1.6.2?
Thanks,
Sushil

Yes it is a known bug...
Thanks.

Obiee spurious pivot table non-total figures

Hi,
My problem is that a pivot table in conjunction with non-hierarchical columns presents figures where no figures exist at data level rather than pivot table totals.
OBIEE version 11.1.1.7.0
Essbase version 11.1.2.3
I have an Essbase data source for my subject area.
I have a column (dimension) 'Account' which has the structure (in Essbase) Account is parent of 'Total Income and Expenditure' is parent of 'Total Income' and 'Total Expenditure'. I filter to only include 'Total Income' and 'Total Expenditure' in my query.
I have a column (dimension) 'Entity' which has a number of tiers of which I am including in the query only the first level of children of Entity.
My problem is that in a number of rows I get figures against 'Total Income' where when I check against the source this should be null, all of the way down the hierarchy - i.e. there are no figures at all so this cannot be an aggregation issue.
I am not doing anything exotic on the business layer in terms of alternative aggregation sources.
If I use a hierarchical column I get the correct numbers, but I do not want to in this case.
Any input appreciated.
thanks,
Robert.

Use expression sum(Marks by Name) in the FX of mark measure in the criteria tab and set the property to suppress the values for measure column.
appreciate if you mark as correct.
Regards,
Kashi

Totals in Pivot table

Similar Messages

Maybe you are looking for