Touch pad scroll does not work in firefox minefeild but works in firefox 3.7

Love Minefeild, but have notice that my touchpad scroll up and down does not work. This function works fine in Firefox 3.7 and other software. I am using the lastest nightly builds. Is there a solution?

Sounds like your scroll pad drivers need to be updated, but considering that Firefox 4 is months away from being released the new drivers might not be available yet. Check with your manufacturers website in the software / drivers downloads section for newer drivers.

Similar Messages

  • My Lenovo touch pad scroll does not work with Firefox

    I can't scroll up or down using the touch pad on my laptop. It works in I.E. but not in firefox.

    Sounds like your scroll pad drivers need to be updated, but considering that Firefox 4 is months away from being released the new drivers might not be available yet. Check with your manufacturers website in the software / drivers downloads section for newer drivers.

  • PHP Homepage does not function in Google Chrome but works well in Firefox

    When typing in my websites's name, mtwatersheds.org, it appears in firefox but the background image does not show up in chrome. When I click the home button the address turns to mtwatersheds.org/index.php and everything appears as it did in Firefox. Can I do anything to change this or do I need to include a new file for the homepage in chrome?
    Thank you for your time.

    It actually doesn't work in Firefox either. I suspect you have another default page. If I compare the source between the default page and index.php it's differerent. The image has a .LCK in the filename. Check your server for other default pages that might exist in the root, and check your server setup for which default pages are listed.

  • My HP ProBook S-series laptop touch pad mouse does not respond to me

    My touch pad responds to my tech guy, to my friends, but not to me!  It's like my fingers don't work on it, regardless of the pressure I use or the part of the pad I touch.  Other than getting a new set of fingers - which in itself is problematic - what can I do about this? Has anyone else had this problem?  It's brand new & this was a problem from the get-go.   I had an old Dell latitude D600 & it worked fine for me.
    Please help!

    Well changing fingers is no easy task so I think we better find another solution. Have you tried other fingers? Also make sure the touchpad has not been locked by firmly tapping the top left section of the pad. This is how you can quickly enable or disable the touchpad.
    -Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Itunes does not start for one user but works for others on the same mac

    All of a sudden my itunes does not fire up.
    All other users on the same mac it is working fine.
    I have deleted and reinstalled itunes.
    Any help would be great.
    Cheers

    All of a sudden my itunes does not fire up.
    All other users on the same mac it is working fine.
    I have deleted and reinstalled itunes.
    Any help would be great.
    Cheers

  • Image does not appear in Internet Explorer but displays in Firefox

    Hi All,
    I have an image in my page in the header section.
    The problem is that the image displays in Firefox but does not display in Internet Explorer.
    Thanks in advance.
    Best Regards
    Arif Khadas
    Application Express 4.0.1.00.03
    Edited by: Arif Khadas on Feb 13, 2011 2:29 PM

    Hi Jari,
    Thanks for the reply.
    This is the code that is in the Region Source of the Header Section :
    <table width="100%" border="0" cellspacing="0" cellpadding="0">
    <tr width="100%" align="left" valign="top">
      <td align="right" valign="top">
       <a href="http://www.bridgesinfotech.com/"
        <img src="#APP_IMAGES#header.jpg" alt="Bridges Information Technology" WIDTH="1000" HEIGHT="125">
       </a>
      </td>
    </tr>
    </table>

  • Does not compile on LV 2013, but works fine on LV 2012 SP1

    I have an FPGA VI that compiles without issue with LV 2012 SP1, but does not work with LV 2013 and Xilinx Tools version 14.4. Why is this happening? I have attached the compiler log file.
    Attachments:
    XilinxLog.txt ‏1468 KB

    ba_0101,
    2012 SP1 and 2013 both use different versions of the xilinx compilation tools. As we don't produce that software it's hard to say exactly what may have changed in their implementation that is causing the compilation to fail. A quick look at the logs uncovers this error during the placement phase:
    ERROR:Place:120 - There were not enough sites to place all selected components.
    Some of these failures can be circumvented by using an alternate algorithm
    (though it may take longer run time). If you would like to enable this
    algorithm please set the environment variable XIL_PAR_ENABLE_LEGALIZER to 1
    and try again
    It looks to me like this error stems from this:
    ERROR:Place:543 - This design does not fit into the number of slices available
    in this device due to the complexity of the design and/or constraints.
    Which is a simple resource overmapping error. It looks like your design is rather large based on the rest of the logs. Am I correct in assuming this? During the compilation, what do the pre-synthesis device utilization reports estimate?
    With large designs it is common to sometimes have successful compilations and sometimes not due to the random nature of the compiler during the place and route phases. Does the design consistently fail in 2013 accross several compilation attempts?
    If you continue to see consistent failures, Xilinx's support documentation for this error suggests using setting an environment variable within the compile tools to use a different algorithm in the P&R phase. According to the documentation, this algorithm may take longer to execute, however it should improve the likelihood that your design successfully compiles. 
    Additionally, if the design is just over utilization, you may benefit most by searching your design for areas that could be quickly and easily optimized to decrease resource utilization. I hope this information helps, please post back if you have any further questions.
    Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

  • Compaq Presario F767NR caps lock,scroll,touch pad blue light not working

    Hi,
    I have a Compaq Presario F767NR. It downgrade it to xp. All my drivers are ok. But caps lock,scroll,touch pad blue light not working though its function is ok.
    I think led is ok. I find that for the scroll lock when i press fn+num lk then the blue light works fine.

    I have the same problem and I think it started when I downloaded the SP2 for the Windows Vista. So probably it is not a problem of the laptop. I have an HP Pavilion dv9500 notebook PC.
    Message Edited by Yannis1980 on 10-13-2009 12:09 PM
    Message Edited by Yannis1980 on 10-13-2009 12:09 PM

  • Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

    Hello,  Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem?  please help me  sincerely, Karel 

    I would try installing the Windows 8.1 (64-bit)  Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode.  Try the available earlier versions if the current driver does not work for you. 
    If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
    To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
    The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4  and watch it from there.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangly (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

  • MB Air two finger scroll does not work for a user but does for another

    Hi
    MB Air. 10.9.3.
    Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
    I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
    Tried this in Terminal:
    defaults write -g com.apple.trackpad.scrollBehavior 2
    Any ideas?

    This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • My old MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but suspect logic board, any ides any body

    My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??

    Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
    Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
    other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
    You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
    Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
    I know you have a gripe, I get that all too well honestly .

  • My new three week old Chromebook touch pad just quit not working.

    My new three week old ChromeBook touch pad just quit working I have tried to reset or as you call it powerwash but still nothing have to use usb port mouse can you help its only two weeks old and i use it every day for school. 

    @miarose ,
    Hello and thank you for posting on the HP support forum.  If the touch pad is still not working after you have done the power wash. You will need to contact phone support for repair options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

Maybe you are looking for

  • Deleting queued email notifications in SCSM 2012

    Hi, We have disabled the email notification channel in SCSM 2012 and the workflows which are used to trigger the email notification were running. Now, we need to enable the notification channel. But, we suspect that all the old emails which are queue

  • Create separate pages from 1 long screencapture

    Whilst using the 'scrolling region' or 'scroll active window' functionality within my screencapturing program, I can capture long documents, such as websites, program settings, etc. After pasted into Acrobat obviously Acrobat has a problem for instan

  • Displaying a row by default in ALV table

    Hi all, I have created an alv table in which i have to display a row by default. I have set all the fields of the table as editable. Also I have created the total calculation for the amount field by using the aggregation method, I want to displat the

  • Mighty mouse makes buzzing sound?

    Just gone through the procedures of manually fixing the common problem of the mighty mouse tracking ball having stopped working due to finger junk/maintenance neglect. As the Apple official recommendation of reversing mouse and working out any blocka

  • UNABLE TO SAVE PORTAL REPORTS OUTPUT TO DISK WHEN USING INTERNET EXPLORER

    Hi, We are unable to save portal reports output to disk when we are using Internet Explorer. This works fine if we use Netscape. Steps to reproduce 1. Run a report from portal 2. Now from the IE menu, select File-> Save As We get a warning saying tha