Touch panel fonts and Graphics
Gentlemen
In addition to my previous issue, I would like to ask regarding touchpanel TPC-2006 fonts and graphics. See, for our client we plan to give four screens in touch panel and in one screen it is with list of alarms. So here when list box control is drag n drop into front panel its showing horizontal and vertical scroll bar perfect,but when deployed to touch panel its surprise horizontal screen bar not seen this is one issue and also all fonts are not clear and things that seen in front panel when deploy its not shown in TPC why? is there any way if so please help me
I Have attach snap shot of it see in that in my front panel screen i hv got horizontal scroll bar, column header but in touch screen couldn't get all this. hope it will help to get better idea .
thanks
Attachments:
Front panel.JPG 59 KB
touch panel screen.JPG 21 KB
The graphics and font rendering in the touch panel module is a known issue.
As you have found out, the rendering of text and graphics on the TPC platform is not the same as running under Windows. The only way I have found to work around this issue is to continue to play around with the layout on the panel until you get acceptable results on the TPC.
I had an application a couple of years ago that was deployed to the TPC-2006 platform. When all was said and done, in order to get an acceptable looking panel on the TPC-2006 the windows panel looked severely misaligned in some areas.
Similar Messages
-
How do I change the font and graphic size when using Firefox
I have recently switched from Windows to Mac. When resizing the window in Mac the font and graphic size do not follow -- they stay the same size and only more "white space" is created by increasing the window size. How do I get the graphics and fonts to adapt to the new window size or at least make the whole image bigger. I am using Firefox 3.6.12 and Mac OS10.6.5. Thanks for the help.
You can select to zoom the full page or only the text: View > Zoom > Zoom Text Only<br />
Firefox 3 can remember the zoom level site specific.
See:
* http://kb.mozillazine.org/Zoom_text_of_web_pages
* http://kb.mozillazine.org/browser.zoom.siteSpecific
* http://kb.mozillazine.org/browser.zoom.full -
Bitmapping Fonts and Graphics in Mountain Lion
My fonts graphics are bitmapping whenever I use Adobe CS5 (specifically, Illustrator and Indesign). Then I noticed that fonts and graphics are bitmapping in Chrome as well. It seems to work fine in Safari, but I still see some bitmapping, such as the editing bar above, as I type this question (in Safari).
I've also get a MacBook Pro 15" with Retina display.
Any ideas?Here is an interesting discussion on the same topic:
https://discussions.apple.com/message/16898528#16898528
The license doc can be found by clicking on the font you want in Font Book > Preview> Show Font Info. -
Is it possible to get my fonts and graphics more like Ubuntu.
Is it possible to get decent graphics in Arch? I've tried all sorts of things and I never seem to get things the way I want. At work, I use Ubuntu 11.04 with GNOME fallback and I really like the fonts under the stock setup, but I can't seem to get Arch to do the same. In fact, I nearly can't stand reading pdf files (something I do a lot of for work) in Arch, because they are rendered so poorly. It is as if the whites are two white and the blacks too black, and there is a yellow like haze around the fonts. It is nearly painful to look at for extended periods! My hardware at home is comparable (if not better) to my hardware at work, so it doesn't make sense for it to be that way.
If I've got an ATI Radeon HD 4670 card, should I use the proprietary driver or generic driver? Or, does it not even matter?
I've installed and messed with the infinality font patches, but I can't seem to get anything good with them either. (I posted about font problems a while back, but I've upgraded a lot of hardware since then.) I've looked at the ubuntu font packages, but everything I see states that they are outdated.
I like Arch, because it is light and snappy compared to Ubuntu, so I don't want to switch OS'es.I took a quick look at the Ubuntu packages for evince and poppler, and couldn't see an obvious reason for improvement over stock.
Poppler's font rendering is known to be bad (and difficult to fix).
The quality of individual monitors is one of many variables that can make a huge difference to the perceived quality of fonts.
The radeon vs ATI proprietary driver shouldn't make any difference, unless the open-source driver is royally broken, and I can't recall anyone else calling such brokenness plausible - it would be blatantly obvious to every user of it, surely. -
HT201262 Fonts and graphics are slightly "fuzzy". Colors are not correctly displaying
After Mavericks installation on my Macbook Pro mid-2012 (non-retina), the fonts appear slightly fuzzy, the graphics seems less crisp and the colors are just "off". This issue seems to be system wide but is much worse whilst using Safari for some reason. (Safari 7.0)
Please advise and thanks in advance for any and all help/suggestions!Hi,
There should be some problem with system settings. First of all, please check fonts size setting in Windows personalize.
Roger Lu
TechNet Community Support -
After Mavericks installation on my Macbook Pro mid-2012 (non-retina), the fonts appear slightly fuzzy, the graphics seems less crisp and the colors are just "off". This issue seems to be system wide but is much worse whilst using Safari for some reason. (Safari 7.0)
Please advise and thanks in advance for any and all help/suggestions!
**P.S. I accidentally posted this same question earlier in the wrong forum/discussion but I cannot figure out how to delete/edit it, so I apologize if you see this posted twice.http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Haaga" <[email protected]> wrote in message
news:e4t6bv$olq$[email protected]..
> Any idea where I could find a list of "standard" fonts
or colors? -
Keynote to ipad, with custom fonts and graphics
Have a keynote presentation we've spent a lot of time on.
Custom fonts, graphics.
I've given up trying to import it into keynote on the iPad. Fonts alone are a big issue.
So, trying converting it to quicktime, but then it plays as a movie, there is no simple, elegant solution to pause, or tap through the presentation.
Or, am I missing something?!
Appreciate any help.
CharlesHi, i found this "solution".
It's impossible to upload new fonts on iPad, but you can convert your slides in pictures and upload your new presentation on iPad.
I dont' like it ... but it's the one way i found.
http://cursorgaze.com/using-custom-fonts-on-keynote-for-ipad-and-slideshare/ -
Why are my fonts and graphics not showing up on some computers?
Help for a newbie?
I just published my first website! It's pretty basic, but I
learned a lot.... But some of the colors and fonts show up
differently on different computers. Also, I created an image that
had gray and white marbling and it showed up as just gray on the
website.
Can you tell me what I need to do to make my graphics show up
properly?> Colours are subjective which is why there are "web safe"
colours, these
are
> alleged to look the same on every PC
Sorry, but that is NOT what web-safe colors refer to. In the
old days many
users had 8-bit graphics cards capable of displaying only 256
colors.
Web-safe colors were those included in the most common 256
color palette.
Today hardly anybody uses 8-bit graphics cards so designers
are safe using
full-color (24- or 32-bit) palettes. Your comment that colors
are subjective
is correct if you mean that colors will often display
somewhat differently
computer to computer. This is because of the wide variation
of graphic
cards, monitors, room lighting, etc. What looks like dark red
on my screen
might look brown on another. This is unavoidable.
Walt
"Ian" <[email protected]> wrote in message
news:e4t54o$n2p$[email protected]..
> Hi
>
> Colours are subjective which is why there are "web safe"
colours, these
are
> alleged to look the same on every PC
>
> Fonts as has been said if you are using a non standard
ie not installed by
> both windows and apple then the viewer will not see
them. In which case
the
> page will default to a basic font. which of course ruins
your layout.
>
> Embed them as flash or graphics
>
> cheers
>
> Ian
>
>
> "Haaga" <[email protected]> wrote in
message
> news:e4t3b1$ks6$[email protected]..
> > Help for a newbie?
> >
> > I just published my first website! It's pretty
basic, but I learned a
> > lot....
> > But some of the colors and fonts show up
differently on different
> > computers.
> > Also, I created an image that had gray and white
marbling and it showed
up
> > as
> > just gray on the website.
> >
> > Can you tell me what I need to do to make my
graphics show up properly?
> >
>
> -
LabVIEW Touch Panel Module for Linux
Hi,
Does NI released Touch Panel Module for Linux?
Thanks,
AliHi Dennis,
Here is the article I read about LabVIEW Embedded Development Module. Page 1-1, "Taking Your Graphical Design to Any 32-Bit Microprocessor".
http://www.ni.com/pdf/manuals/371233b.pdf
About the topic you are right. I have the VI on Windows XP. I converted it to WinCE 5.0 with LabVIEW Touch Panel Module and it works perfectly. I have LabVIEW for Linux and I converted the VI to Linux and it works on PC. Now, I want to convert it to Embedded Linux that works on ARM microcontroller.
I am looking for LabVIEW Touch Panel Module for Linux because the only supported platform for that is Windows.
http://www.ni.com/support/labview/lvtool.htm#touch
Thanks,
Ali -
I'm looking to replace an embedded DOS controller that uses Modbus to communicate with a touch screen. I was considering using the touch panel module and developing the application in LabVIEW. This application would need to communicate and control I/O via Modbus, replacing the touch screen and DOS controller. I'm concerned that the touch panels may not have enough performance and/or memory space to support this size application. Sales quoted the development requirements of the PC and didn't think this could work. I'm trying to avoid a full-blown Panel PC with a disk drive, etc. What are the limitations and what would NI suggest?
Hi,
Thanks for your post. Since you have quite a bit of things going on in your application, you might want to consider customizing your own controller and using the FPT-1015 touch panel monitor. This allows you to run large applications on your host PC without giving up the user interface offered by a panel PC. Thanks again for your post!
Regards,
Todd V.
National Instruments
Applications Engineer
NI Prototyping Community -
This is the first time that I have tried to use LabView to program a Touch Panel. I am using the TPC-2006. I have used LabView before very successfully.
I am trying to pretty up my touch panel screen. Does anyone know of a trick or font that looks better on the Touch Panel? Everything I have tried looks very plain and boring. My application is basically button driven and uses a few list box controls. I found with the list box controls that they don't look great and color/size/location is sometimes difficult to determine. Any advice?
Thanks.If you find the limited font selection of Windows CE boring, you can
realy jazz up your buttons by making them pictures. You can design a
button in photoshop then use the picture to create a custom control. Then you can make whatever font or look you want.
Also Check out the UI Community Interest group for some of the new custom controls
-Hunter -
I Just started using LV touch Panel module with an NI TPC-2106.
I have two differenct problems:
1) I was planning on using the "Meter" control quite a bit. I can set up the meter exactly how I like on the host PC, but on the touch Panel computer it seems to ignore my adjustments, mainly the start and end of the scale - i.e. I would like control to run from 0 to 360 with 0 straight up, using the entire circle. However, on the Touch panel computer it always puts 0 at about 7 o'clock and 360 at about 5 o'clock. I have also tried adding markers to no avail.
2) I am communicating with a compact fieldpoint controller. I can creat a shared variable that is a simple double with no problems. However, I have some shared variables that use a custom control for the variable type - bascially a cluster with a couble doubles, a time stamp, and an enumeration. It lets me drag the shared variable into my diagram, but it seems to ignore it when I run it.Ipshita_C,
- I am using LV 8.6.1f1and LV Touch Panel 8.6.1.
- I have attached a simplified VI that shows how I want to use the meter. Notice that the placement of the endpoitns does not work correctly on the touch panel, and that it ignores the arbitrary markers that I placed.
- I also have included an XY graph control that displays on the TPC with margins around the graph area that I removed from the graph control.
- For the shared variable, it appears to be an issue related to the touch panel, not fieldpoint. I found another thread in this forum that mentioned that clusters containing Enumerations do not work in shared variables on the touch panel. I changed the enumeration to an integer and it now works fine.
In general, there seem to be a disappointing number of limitations in the touch panel implementation. My biggest concern is that I have not found any documentation from NI that lists these limitations. I seem to have to try things out and see what works and what does not work. Can you point me to a comprehensive list of touch panel modules limitations?
Attachments:
test 2.vi 10 KB -
Parallel use remote control and touch panel.
Hi.
Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and was synchronized with touch panel. Can I use remote control when touch panel is enabled. Now remote control is locked.
Thank's.Hi
No. When a codec is paired with a Touch controller it is not possible to use the remote control.
You question number 677 in link bellow
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf
br Oleksandr -
How do I get the TPC-2012 to connect to my workstation? I have read all the hardware manuals, getting started manuals: nothing works. The remote access using http://x.x.x.x/RemoteAdmin does not work. I have tried to get the FTP service working using the instructions in "How do I configure the FTP server on tpc-2006 and TPC-2016" . Active sync seems to want a USB connection only. I have tried to connect a serial line between com1 on the TPC and com4 on my XP workstation with no results.
I have been able to use the touch panel module with my iPAQ. It worked flawlessly the first time.
Help!
Louis Prugh
General DynamicsHi David,
thank you once again for your help.
So when viewing your Local Area Connection>>Status
you're seeing data packets sent but no packets received on your desktop
machine? - Yes
Is your desktop configured with a static IP address or is it
configured to obtain an IP address automatically?I' ve tried both static IP address and that it obtain IP address automatically, I have also done it with the TPC.
Also, does your TPC
get a valid IP address when the connection to your desktop is present? - when TPC is set to obtain adress automatically it gets IP address and then after some time it loses it - it is set to 0.0.0.0, and then it obtains the IP adress again and so on.
Can you provide the address, subnet, and gateway you're getting for
both machines?- I've done it, but it didn'e help
Also any firewall settings or exceptions you may have
active if the firewall is enabled? - firewall is disabled
I'd also like to know what
modules and toolkits you do have installed on both the TPC - TPC is new and I haven't installed there anything.
On my desktop - I have standard Labview 8.2,the real time module is installed. All I know, there are already drivers for TPC2012 in this LabView version. On the included CD I have only drivers for another TPCs.
Thanks,
Martin -
How to change the font and type in the front panel
Can you tell me how to change the font and type in the front panel if i want to make it looks more beautiful.
1110340040Hi there,
You can change the font size and type as shown below:
- Ee Lim -
See that button on the left side of this post...
If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~
Maybe you are looking for
-
What is " factory reset"? How/Why to use it?
What is the "factory rest" feature? How and when should I use it?
-
how do you get the songs in a playlist to play in order-mine seems to want to shuffle them, even though shuffle is off!
-
NAS connection with Exadata on Network Port
Hi, What I found on exadata and NAS. Can I connect the database servers to external storage? Yes, you may use the network ports on the database servers to connect to external storage via NFS or iSCSI. However, the Fibre Channel Over Ethernet (FCoE) p
-
Going from Windows to an iMac G5
My parents have just bought a second hand iMac G5. They have previously only used/owned PC's. Between them they own 2 iPhone 3GS', an iPad and a Nano iPod. Naturally I have been roped in to help set themselves up. I had a quick look at Switching 101
-
User Want multipale selection in Drill filter in WEB-I 3.1
Hi Team, we have WEB-I report created with Drill filter on it , we have set up drill fillter uisng anyalsis context by enabling report for drill. Now by default we can choose only one value from that fillter , we have requirment to enable it for mult