Touch-Screen Depression

I have noticed that the bottom right hand corner of my 32 GB 3rd generation iPod Touch, if too much pressure is applied, will sink in a little. I don't really know what to do about it, or if it is even a problem. I checked the Apple support page, and I didn't find anything. Please help!

I am using a 64GB 3g iPod Touch however by applying slight pressure *I neither see nor feel* any depression on the bottom right hand corner of screen.
If your iPod Touch is still under warranty then have Apple look at it. If not and it is working properly then continue using it.
Axel F.

Similar Messages

  • Press and hold on a Surface pro touch screen

    Hi,
    I am having some problems with my Surface Pro, trying to control a relay 'press-and-hold'. When I connect a mouse to the Tablet, Windows registers the left mouse up and down events perfectly, allowing the user to control the relay exactly the way I intended, but when I use the touch screen with either the stylus pen or my finger it only seems to press the LabVIEW on release.
    Does anyone have a solution for this problem?
    Chris

    Jeff-P wrote:
    I just tested this on my touchscreen laptop and got a similar behavior. Windows doesn't seem to be registering the left click when you touch the screen until you release. My guess is that this is related to the press+hold for right click functionality on Windows. When I touch and hold for over a second, I get a right click, but when I touch and hold for a shorter time, I get a left click that only registers when I take my finger off. This is consistent with the way that the Windows UI handles touch as well (test the start button for an example).
    Interestingly, if I change the mechanical action of the LabVIEW boolean to 'Switch Unit Released' I can't actually toggle the button ever because the press and hold does not register as a left click, and eventually registers as a right click.
    Jeff Peacock 
    Product Support Engineer | LabVIEW R&D | National Instruments | Certified LabVIEW Architect 
    Actually, this is expected behavior.  Try clicking a button on any Windows app, then, while holding down the button, move off of it.  The button does not register as pressed.  This feature has saved me any number of times. 
    edit:
    Or do you mean it doesn't even depress the button?
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Nokia N8 touch Screen stop working..

    first of all Thankyou for reading my post.
    espicially to those who wanted to help me.
    also before i post this problem i read lots of problems same as my phone problem.
    main is Touch Screen wont work.
    i did this.
    8secs depressed the power botton. failed.
    depressed volume down + camera + rare botton + power botton - failed.
    i tried also to restore factory setting. but the code 00000 0000 or 12345 factory default code. wont work also.
    guys if anyone knows how to fix my n8 touch screen.
    and im using the mouse to navigate my phone.
    please help me. the phone ages 21months.
    before this problem happen. i installed an application called.
    freeware LIE DETECTOR.
    and after that it stop working..
    any idea suggestion or fix solution is much appreciated.
    im a loyal user of nokia since my phone back then is NOKIA 3210.
    please help me sir/maam.
    thankyou very much!

    done updating.. this so called microsoft plugins configuration.
    still touch screen is not working.. what should i do.. please help!
    im not from EU sir.
    im from philippines i bought this cellphone when i was in saudi arabia.
    so that means warranty is not applicable to my location right now.
    pressing power button 8secs and menu volume camera power it does reboot.
    but after that still touch screen wont work.
    is my phone broken?
    by that application LIE DETECTOR?
    that means i cant trust nokia applications at all.
    i dont know what to do.

  • HELP!!! iPod Touch screen SHATTERED :O

    So by the title you have probably figured out the depressing reality I am faced with: My iPod Touch screen has finally shattered into a million pieces :'( It even had a semi-hard case on, but unfortunately for me it landed right on the weakest part of the structure - the thin piece metal between the 30-pin dock connector and the screen, and also where the case is extremely thin and flimsy. That bent into the glass, sending hairline cracks up to the top of the screen as well as shattering the glass around the home button, and as all us iOS device users should know, even gorilla glass can't handle that kind of impact. Luckily I have a screen protector on, so the glass didn't go everywhere and I can still use it without risking a trip to the hospital.
    Sadly, my iPod is more than 2 years old and I didn't get Applecare support, so my question is...what are my chances of getting it replaced or even a discount on their currently ridiculous pricing ($109 + $19.95 P&H!) if I walk into an Apple store and ask? I have heard of many success stories of people getting their devices replaced, but I realise that the fact that it has passed its 2nd birthday will go harshly against my persuasive attempts.
    Also, I live in Australia if that makes a difference. Here are some pics:
    Message was edited by: -GDS-

    Dang! I did some googling around, and there are 2 stores right here in Sydney that can replace your old iPod Touch screen with a brand new genuine screen for $89. Do you think it's worth it or should I just get a 5th Gen iPod for $329?

  • Sometimes my screen freeze after unlock my phone . sometimes after open an app the touch screen not respond to my touch...

    help.... i've faced this problem since the windows phone 8.1 updates.... sometimes my screen freeze after unlock my phone . sometimes after open an app the touch screen not respond to my touch... i tried all the ways like turning off wifi etc and still
    no recover my problem , and still screen freezing problems appear on windows phone 10 technical support..... just wish had to cure it... or i was depressing ....

    Hello,
    This is a developer forum and is intended only for discussions of Windows Phone APIs and app development.
    For technical issues regarding usability, updates, or other Windows Phone usability problems you might want to try the Microsoft Mobile Community forums:
    http://answers.microsoft.com/en-us/winphone/forum?tab=Threads
    Thanks,
    James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

  • Problem push and hold on a Surface Pro tablet's touch screen

    Hi,
    I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
    I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
    Does anyone have a suggestion?
    Any help would be greatly appreciated.
    Chris  

    Previous Post.
    http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
    If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

    I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

    Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

  • Touch Screen unresponsive after iOS 8 update

    My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
    It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
    As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

    I have the same issue. iPhone 5, 1 year-old, not even a scratch.
    Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
    If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
    I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
    Is it really not recommended to downgrade it and have my phone funcionalities back?

  • IPhone 5S touch screen issues

    Hi! I have a lot of issues with the touch screen of my iPhone 5S! the touch screen have areas without response! but not always the sames areas!
    each picture represent the different areas without response in the touch screen! are not the same in some cases!
    I´m writing from Argentina, so we don´t have apple store here to go to replace the cellphone or repair it! I could buy the whole touch screen and replace it by my self, but I don´t know if is only a problem with the touch screen or maybe an issue with the battery or other hardware components!
    Sorry for my English! thank you in advance!

    Hi there Psycho_ar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/TS1827
    -Griff W.

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • HELP: iPhone 6 Keyboard/Touch Screen Not Working

    Hello.
    I recently acquired to an iPhone 6, which has been working properly for the last two weeks. Today, my keyboard/touch screen stopped working properly. When I am typing in iMessage, or trying to compose an email, enter a URL, or anything else that requires my touch keyboard, my "123" button that switches to numbers, punctuation, and special characters does not open. I updated my software to iOS 8.3., which switched to a new and "improved" emoji keyboard, but I did this after my keyboard had already become unresponsive. If I click on the emjoi keyboard icon to switch over, the "ABC" button to swtich back to QWERTY is unresponsive. This is REALLY frustrating! The phone is two weeks old, and I cannot use to for a huge chunk of functionality.
    It's not a dead spot on the touch screen. When I am not trying to access the keyboard, that little bottom left corner works fine to open/use my Phone app.
    I really don't want to reset my phone. Any other ideas?
    I made a Genius Bar appointment for next Wednesday 4/15, but that seems like an eternity from now.
    Please help!

    To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the Touch Screen . If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • HP Spectre 13 touch screen malfunctio​n

    The touchscreen on my Ultrabook malfunctions in a seemingly random fashion.
    It appears to randomly and independently trigger the touchscreen in a clearly visible vertical line about two thirds of the way across the screen.
    The screen reacts as if it has been touched with a finger - but it has not.
    Because these 'ghost' touches are so rapid, it completely trashes whatever I am trying to do at the time as the cursor moves to these random locations and it triggers the opening of mutliple additional webpages, changes to font sizes and screen resolution and prevents me from useing the mouse to try and close down webpages etc.  The touchscreen malfunction is visible in all applications. 
    The only way to stop it is to press the power button until the laptop switches off.
    I am not aware of a definite trigger, although at times I may have been trying to click on something with the mouse in the area where this 'flaw' appears to be located.
    When I first got the laptop I thought it was some really grim virus and spent ages running and re-running scans,until I made the connection with the touch screen.
    Then I wondered if it was something to do with particles or dust and spent ages cleaning the screen - but it happens when there is no visible contamination on the screen at all.
    Has anyone else experience this?

    Hi @Abby501 
    Welcome to the HP Support Forums!
    I understand that you are having some trouble with your touchscreen. I am happy to assist.
    It is hard to know, as yet, what the actual problem is: sensitivity, drivers, hardware, other software, etc. Please post the full product number. See the following, if you need help in finding that.
    How Do I Find My Model Number or Product Number?
    For now, you can see if you can try to adjust the touchscreen settings and see if it helps:
    Press the Windows key which brings up the Start Screen
    type "touch screen"
    Click Settings
    Select  "Calibrate the screen for pen or touch input"
    Select and configure as desired
    Let me know if that helped.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • How do I turn off the tiny Shuffle-sized iPod Nano (v6 with a touch screen) when not using its iOS?

    Hello and happy new year.
    I decided to use this used iPod Nano (touch screen) as an eight/8 GB flash disk/storage (FAT32). I can access the files just fine. I can always restore it back to use iOS quickly and easily if needed.
    However, it never seems to turn off/sleep. I tried holding down the big button on top right (next to the two volume controls [+ and -]), but it never does anything. Also, it says "OK to disconnect." when disconnected.
    So, I restored its iOS v1.2 from an old 15" MacBook Pro (2008; Mac OS X 10.5.8) onto it and can turn off easily. However, I cannot access its drive since it is not a MS FS and Windows XP Pro. SP3 asked me to format. How can I turn it off and still use it as an 8 GB USB flash disk/drive without installing and using iTunes?
    Thank you in advance.

    Hey,
    Holding in the play/pause and the menu (select) button will force the iPod into disk mode. This is the stand by mode you are talking about.
    To turn your iPod off properly you will want to hold down the play/pause button until the screen goes blank and then turn the hold switch on. This is cause the iPod to go to the Apple screen when it turns back on.
    Hope this helps,
    Ms D.

  • Yoga 2 Pro Touch screen not working

    I've had no problems with my yoga 2 pro for over a month, but last night I decided to do windows updates.  This is the model with the i7, and 8gb of ram.  I let it update and then restarted it.  After it started up, I tried to swipe the cover screen up, but nothing was happening.  I then decided to use the mouse, and soon realized that the touch screen was unresponsive.  I've tried to restore the computer to before the updates, but it hasn't fixed the problem.  I can still switch to tablet and stand mode, etc. and the screen will rotate, but I can not get the touch screen to respond to anything.  I tried to install some drivers, but none of them are for the touch screen as far as I know, and nothing else seems to work.  Does anyone know a fix, or maybe know of a driver I need to install?

    Hey mgollery,
    Sorry that you are having this issue. Do you know what might have caused this at least? Did you plug in any USB devices recently or does the touchscreen disable after you plug it in? Did you install any programs recently? Do you have the most updated drivers? Do you leave it on long enough for it to go into sleep mode?
    Btw, you should check out this other thread here:
    http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-touchscreen-not-working/td-p/902131/...
    Some people got it working by uninstalling recently installed software, updating video card drivers, and others have just had to get it replaced.
    If none of the uninstalls, updates, drivers stuff works, I would do the following (like the others have said in this list), but please be careful (stuff might break):
    - Do a system restore (to a point where it worked before)
    - If that doesn't work, do a windows refresh
    - If that doesn't work, I'd call Lenovo and see what tech support can do to help. They will try to update stuff for you and if that doesn't work, they will literally try to reset your computer basically to factory settings (Lenovo actually has their own program that tries to reset stuff)
    - If that doesn't work, and you can't live without a touchscreen, I'd call up Lenovo or if you are still on the phone with them,  get them to replace it. They handle all the shipping and while it sucks to not have it for a couple of weeks, you at least get the computer you paid for.
    Ultimately, what happened to me was that none of the little tricks worked. System restore didn't work. Windows refresh didn't work. Then I called them and they basically told me to do the same things. This time though, during the refresh, some bug happened where it screwed up the refresh so I couldn't even start Windows anymore and it bricked my computer. Then they even had me go through the Lenovo refresh thingy which didn't work. At the end, I ended up shipping it back to them to fix and I think they basically just gave me a new Yoga 2 Pro. The whole process sucked, but at least now my touchscreen works and I never plug my fitbit into the USB port anymore.
    Hope that helps.

Maybe you are looking for