Touch screen mouse

Hi
I'm beginning to become totally annoyed by the touch screen mouse; 27" imac... it seems to have a mind of it's own.
It is indeed much better than the former grot wheel but it selects and does things which I don't ask it to do. It's like the "touch" is about 5mm above the surface and emits an electric charge will open commands from apps sitting behind which aren't current. Absolute pain the proverbial!
Is this normal?
Regards.

No, but sometimes add a USB keyboard and mouse... Doesn't help though with or without. It's ridiculous, it just auto selects stuff when hovering and double clicks which causes havoc.
Thanks!

Similar Messages

Touch screen mouse clicks

Hi, id firstly like to begin by saying i am only learning Labview at the minute so i appeal for some patience,
I have done the relevant searchers also but i am unable to find an answer to my question.
Ok i am using a 17.5" resistive touchscreen to track the path of a ball which is placed on the screen..I want the screen to communicate the x-y co-ordinates to an x-y graph on the front panel of my program. In my attemp at doing this i have used a previous labview example which uses a mouse click event structure. However this means the touchscreen acts as a second mouse. My problem is that the touchscreen is not communicating with the graph directly as it is controlling the entire pc screen meaning it can interfere with the program.
I have included a two page word doc with screenshots which hopefully can explain better what i mean. One screen shot is the display result of the Labview program, the second resembels the path of the ball on the touch screen
Page one of the doc shows the ball tracking when only the first quadrant of the screen is used.
Page two of the doc shows the result when the full touchscreen is used. as the touch screen acts as a mouse it is only able to track the ball when it is in the same locating as the graph on the screen.
I have found it difficult to explain my problem but i hope you gurus can understand and provide me with a solution!
I am hoping someone can give me an answer that will allow the touchscreen to communicate with the labview x-y graph only.
Thanks in advance for any help.
Attachments:
Doc1.docx ‏277 KB

Please do not embed screenshots inside of Word documents. Not everybody has Word, and even if they do, most people don't like using Word 2007+. Attach the screenshots as PNG files. DO NOT ATTACH BITMAPS OR CHANGE THE EXTENSION OF BITMAPS TO GET AROUND THE BAN ON BITMAPS. Don't worry I'm not screaming specifically at you. It's just my normal scream sentence.
As for your issue, there's a couple of things that are unclear from your description. Before offering a solution it's better to understand the objective here. The example you are using was specifically designed to only track mouse movements over the graph. However, your description seems to imply that you want to draw on the graph regardless of where the mouse is on the screen. Is this correct? If so, then you need to use the Input Device Control VIs to poll the position of the mouse, as that returns the mouse coordinates globally (search the examples for "mouse" and look at the "Basic Input Demo" example). Second, why an XY graph? Are you drawing a bouncing ball over some graphs? I would think you'd want to use the picture control.

I updated to firefox 4 on my laptop (a touchscreen capable HP tx2z) and now I can't use the scroll on my mouse pad, I have to use my touch screen to scroll.

My computer is running windows 7, it's an HP tx2z touch screen laptop. My mouse pad scroll doesn't work on firefox 4. Also some features seem to missing such as the condensed menu bar and tab sorting that was spoken about in the introduction to firefox 4 video.

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes to the F11 mode.

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes back to the F11 mode. Is this a hardware or software issue? How can it be fixed?

I called Apple. The problem was caused by settings in Mission Control. After changing all 4 of the Hot Keys (if that's the proper term) shown in the bottom half of the Mission Control window in System Preferences to "-" by clicking on the drop down menus, the problem went away. Apple's help was excellent!

Problem push and hold on a Surface Pro tablet's touch screen

Hi,
I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
Does anyone have a suggestion?
Any help would be greatly appreciated.
Chris

Previous Post.
http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

HP Spectre 13 touch screen malfunction

The touchscreen on my Ultrabook malfunctions in a seemingly random fashion.
It appears to randomly and independently trigger the touchscreen in a clearly visible vertical line about two thirds of the way across the screen.
The screen reacts as if it has been touched with a finger - but it has not.
Because these 'ghost' touches are so rapid, it completely trashes whatever I am trying to do at the time as the cursor moves to these random locations and it triggers the opening of mutliple additional webpages, changes to font sizes and screen resolution and prevents me from useing the mouse to try and close down webpages etc. The touchscreen malfunction is visible in all applications.
The only way to stop it is to press the power button until the laptop switches off.
I am not aware of a definite trigger, although at times I may have been trying to click on something with the mouse in the area where this 'flaw' appears to be located.
When I first got the laptop I thought it was some really grim virus and spent ages running and re-running scans,until I made the connection with the touch screen.
Then I wondered if it was something to do with particles or dust and spent ages cleaning the screen - but it happens when there is no visible contamination on the screen at all.
Has anyone else experience this?

Hi @Abby501
Welcome to the HP Support Forums!
I understand that you are having some trouble with your touchscreen. I am happy to assist.
It is hard to know, as yet, what the actual problem is: sensitivity, drivers, hardware, other software, etc. Please post the full product number. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
For now, you can see if you can try to adjust the touchscreen settings and see if it helps:
Press the Windows key which brings up the Start Screen
type "touch screen"
Click Settings
Select "Calibrate the screen for pen or touch input"
Select and configure as desired
Let me know if that helped.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Yoga 2 Pro Touch screen not working

I've had no problems with my yoga 2 pro for over a month, but last night I decided to do windows updates. This is the model with the i7, and 8gb of ram. I let it update and then restarted it. After it started up, I tried to swipe the cover screen up, but nothing was happening. I then decided to use the mouse, and soon realized that the touch screen was unresponsive. I've tried to restore the computer to before the updates, but it hasn't fixed the problem. I can still switch to tablet and stand mode, etc. and the screen will rotate, but I can not get the touch screen to respond to anything. I tried to install some drivers, but none of them are for the touch screen as far as I know, and nothing else seems to work. Does anyone know a fix, or maybe know of a driver I need to install?

Hey mgollery,
Sorry that you are having this issue. Do you know what might have caused this at least? Did you plug in any USB devices recently or does the touchscreen disable after you plug it in? Did you install any programs recently? Do you have the most updated drivers? Do you leave it on long enough for it to go into sleep mode?
Btw, you should check out this other thread here:
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-touchscreen-not-working/td-p/902131/...
Some people got it working by uninstalling recently installed software, updating video card drivers, and others have just had to get it replaced.
If none of the uninstalls, updates, drivers stuff works, I would do the following (like the others have said in this list), but please be careful (stuff might break):
- Do a system restore (to a point where it worked before)
- If that doesn't work, do a windows refresh
- If that doesn't work, I'd call Lenovo and see what tech support can do to help. They will try to update stuff for you and if that doesn't work, they will literally try to reset your computer basically to factory settings (Lenovo actually has their own program that tries to reset stuff)
- If that doesn't work, and you can't live without a touchscreen, I'd call up Lenovo or if you are still on the phone with them, get them to replace it. They handle all the shipping and while it sucks to not have it for a couple of weeks, you at least get the computer you paid for.
Ultimately, what happened to me was that none of the little tricks worked. System restore didn't work. Windows refresh didn't work. Then I called them and they basically told me to do the same things. This time though, during the refresh, some bug happened where it screwed up the refresh so I couldn't even start Windows anymore and it bricked my computer. Then they even had me go through the Lenovo refresh thingy which didn't work. At the end, I ended up shipping it back to them to fix and I think they basically just gave me a new Yoga 2 Pro. The whole process sucked, but at least now my touchscreen works and I never plug my fitbit into the USB port anymore.
Hope that helps.

Press and hold on a Surface pro touch screen

Hi,
I am having some problems with my Surface Pro, trying to control a relay 'press-and-hold'. When I connect a mouse to the Tablet, Windows registers the left mouse up and down events perfectly, allowing the user to control the relay exactly the way I intended, but when I use the touch screen with either the stylus pen or my finger it only seems to press the LabVIEW on release.
Does anyone have a solution for this problem?
Chris

Jeff-P wrote:
I just tested this on my touchscreen laptop and got a similar behavior. Windows doesn't seem to be registering the left click when you touch the screen until you release. My guess is that this is related to the press+hold for right click functionality on Windows. When I touch and hold for over a second, I get a right click, but when I touch and hold for a shorter time, I get a left click that only registers when I take my finger off. This is consistent with the way that the Windows UI handles touch as well (test the start button for an example).
Interestingly, if I change the mechanical action of the LabVIEW boolean to 'Switch Unit Released' I can't actually toggle the button ever because the press and hold does not register as a left click, and eventually registers as a right click.
Jeff Peacock
Product Support Engineer | LabVIEW R&D | National Instruments | Certified LabVIEW Architect
Actually, this is expected behavior. Try clicking a button on any Windows app, then, while holding down the button, move off of it. The button does not register as pressed. This feature has saved me any number of times.
edit:
Or do you mean it doesn't even depress the button?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How do I set up photoshop to work with a touch screen?

Hi,
I just bought a 15.6" Asus Q500A touchscreen laptop with Windows 8. I downloaded photoshop and the 'touch app plug-ins' through the Adobe Application Manager for creative cloud. When I open a file in PS and select the brush(or any other) tool if I use the touch screen to drag it accross the canvas nothing happens. It still works with my mouse though.
How can I get this to work properly?

That does not surprise me. As I wrote Photoshop does not support Touch. It has supports for graphic tablets pens with wintab device drivers. It has support for mice and keyboards. No where do I see touch support documented in Photoshop manual. Here is a link to Photoshop manual search it for touch, http://helpx.adobe.com/pdf/photoshop_reference.pdf The closest thing I found to touch support is the following:
========================================================================================== =======
Use the Rotate View tool
You use the Rotate View tool to rotate the canvas non-destructively; it does not transform the image. Rotating the canvas can be useful for any
number of reasons, including facilitating easier painting or drawing. (OpenGL is required.)
You can also use rotate gestures on MacBook computers with multi-touch trackpads.
1. In the toolbox, select the Rotate View tool . (If the tool isn’t visible, hold down the Hand tool.)
2. Do any of the following:
Drag in the image. A compass will indicate north in the image, regardless of the current canvas angle.
In the options bar, enter degrees in the Rotation Angle field. Click or drag the circular Set Angle of Rotation control.
3. To restore the canvas to the original angle, click Reset View.
For a video on the Rotate View tool and other workspace tips, see www.adobe.com/go/lrvid4001_ps. (Discussion of the Rotate View tool begins at the 5:10 mark.)
Disable trackpad gestures (Mac OS)
If you have a MacBook computer with a multi-touch trackpad, you can use the trackpad to flick, rotate, or zoom images. This functionality can
greatly increase your efficiency, but you can disable it if inadvertent changes occur.
1. Choose Photoshop > Preferences > Interface (Mac OS).
2. In the General section, deselect Enable Gestures
========================================================================================== ===========
My Wacom Intuos 5 Touch device driver has some touch support for some Photoshop features. I do not try to finger paint I use the Wacom pen for that. I also do not get the strange finger paint in Photoshop when I use my finger to move the mouse cursor with the Wacom Intuos 5 touch support. Starting outside an image window or inside one,
However if I add two finger support add tap to click I can finger paint and also use other tools. However I'm not into finger paint so I do not configure Touch support that way for Photoshop.

Touch Screen Not Working!

So I am a little lost as to what to do now, earlier today my Toshiba encore was working fine, had it about 2 months and never had any issues nor have I mistreated it / dropped it or pressed too hard on the screen / spilt anything on it... taken real good care of it. It was working literally a couple of hours ago (spent the last few hours trying to troubleshoot it)... and well when it was working I stopped using the touch screen for a while to plug it into a hdmi monitor and was using a bluetooth mouse and keyboard to watch youtube in my living room... soon as I had finished doing that I unplugged it and placed it softly on my bed, a few minutes later I went to use it and it was unresponsive I thought not much of it and restarted my pc, still didn't work... so I tried looking in device manager and disconnecting the mouse and keyboard etc.... the touch screen shows up in device manager under HID device, and shows as installed and "working correctly". Here is the catch it doesn't work in the EUFI BIOS ... I tried to reinstall the driver and no luck...Ive completely refreshed my pc now using the recovery options system restore was not available and it still doesn't work, I had to use an OTG cable to connect a mouse to Finnish the setup. can anyone help me diagnose this? tomorrow I am considering returning it if I can. If not I guess if its something physical I will have to see if there is luck and I can pay out for a replacement digitizer .

Okay after many hours of frustration and worry, I have solved this issue. The touch screen was some how being disabled because of my Logitech G500s plugged into my OTG cable. The solution was I booted into UEFI BIOS without the mouse plugged in and then plugged it in (I was doing this because I had no touch screen and was trying to use a mouse on the bios and thought about using a usb mouse and it worked, then I accidentally touched the screen and noticed that the mouse cursor disappeared as I did this, then I clicked save and close on the BIOS and it come up with the confirmation and this confirmed the touch screen to be working again. I then booted back into windows WITHOUT the mouse plugged in to be sure, and it worked! I tested this once more and it again disabled touch, and the same fix, fixed it, no idea how this is disabling the touch screen even to the point it doesn't work in the BIOS... but it does, and at least this fix works XD. So maybe if somebody else gets the same issue then here is the solution (for me at least).

How do I disable touch screen temporarlily in command promt?

I had been Starting a Command prompt, and here's what I have So far
@echo off
title YELLOW_BEAR
mode 166,68
:BEGIN
color 6E
echo ITS ME
shutdown.exe /r /c "IT'S ME" /t 60
(disabling mouse, touch screen, ect. line would be here)
goto GOLDEN_BEAR
:GOLDEN_BEAR
"C:\Users\[USERNAME]\Videos\[FILENAME].mp4"
TIMEOUT 20
pause
goto GOLDEN_BEAR
I have one teeny question- Is there Any way I can add on to this so it can also disable ALL user actions? (touching the screen, typing, mouse pad) BUT, for only temporary purposes so it can be enabled again when restarted? (note line #7, "shutdown.exe
/r /c "IT'S ME" /t 30)
so it would be like this-
user clicks on prompt
user sees ITS ME on command prompt window
user is notified windows will shutdown, with comment of IT'S ME
[FILENAME].mp4 (around 20 seconds, note "TIMEOUT 20") would play, user cannot pause because off
         all actions would be disabled
after 20 seconds, [FILENAME].mp4 would play again, in fact 2 more times ,total of three the user.
      not being able to do anything], until it restarts and the
        touch screen would be working again
by the way, I run windows RT 8.1 on surface 1

Open it in iTunes and restore your device.

Dell XPS Laptop Touch Screen Inputs Interpreted as Panning Photoshop CS6

I have been working with Adobe Illustrator for a little while now and decided that I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version? I am interested in buying Photoshop so I can use it whenever I’d like for longer than the 30 day trial allows, but I certainly don’t want to buy it if I cannot use my stylus on the touch screen to draw. Any help is much appreciated!
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool. http://www.youtube.com/watch?v=Zd1NOBway4o
Uhhh yah. Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 8086 MB
Free memory: 4677 MB
Memory available to Photoshop: 7156 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Intel(R) HD Graphics Family
OpenCL Unavailable
Driver Version: 8.15.10.2455
Driver Date: 20110719000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics Family
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.8577
Driver Date: 20111103000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Ryan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 911.9G, 762.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Maximum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mean 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Median 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mezzotint 13.0
   Minimum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Pinch 13.0
   Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Range 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0.1
   Shear 13.0
   Skewness 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Sumi-e 13.0
   Summation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

I have this exact same problem, though I have a touchscreen monitor for my PC rather than a laptop. This is a bit awkward, but until I find a real solution, this works just fine: when you want to use the touch screen for CS6, hold down the mouse button. You may have to use the mouse to tap the tools you want, but at least there's a temporary solution.

Can I use a touch screen monitor with my macbook pro?

I am doing a lot of photo organization and thought it would be easier if I had a touch screen monitor attached to my macbook pro. Has anyone tried this and if so, what brand did you use.
Thanks
Bob

All a touchscreen is going to do is replace your mouse or trackpad, you can't use two hands at once to gain any speed advantage organizing photo's.
Also it would have to be a pretty big touch screen, place your two hands over a 17" screen and most of the screen is blocked.
If you need something like that, talk to Microsoft, they have a "Big @ss table" that does that.
Gives me a backache just looking at those people
http://www.engadget.com/2007/06/20/microsoft-surface-one-day-your-computer-will- be-a-big-***-table/

Nokia N8 touch Screen stop working..

first of all Thankyou for reading my post.
espicially to those who wanted to help me.
also before i post this problem i read lots of problems same as my phone problem.
main is Touch Screen wont work.
i did this.
8secs depressed the power botton. failed.
depressed volume down + camera + rare botton + power botton - failed.
i tried also to restore factory setting. but the code 00000 0000 or 12345 factory default code. wont work also.
guys if anyone knows how to fix my n8 touch screen.
and im using the mouse to navigate my phone.
please help me. the phone ages 21months.
before this problem happen. i installed an application called.
freeware LIE DETECTOR.
and after that it stop working..
any idea suggestion or fix solution is much appreciated.
im a loyal user of nokia since my phone back then is NOKIA 3210.
please help me sir/maam.
thankyou very much!

done updating.. this so called microsoft plugins configuration.
still touch screen is not working.. what should i do.. please help!
im not from EU sir.
im from philippines i bought this cellphone when i was in saudi arabia.
so that means warranty is not applicable to my location right now.
pressing power button 8secs and menu volume camera power it does reboot.
but after that still touch screen wont work.
is my phone broken?
by that application LIE DETECTOR?
that means i cant trust nokia applications at all.
i dont know what to do.

English speaking, literate, touch type, keyboard, desktop (not a tablet), not a touch screen...

I speak English. I read left to right, top to bottom. I touch type on a keyboard. I do not have nor do I want a touch screen. I use the mouse only when I find it to be an advantage. My primary input method is keyboard. I feel many programers when programming an interface have over looked this in a rush to accommodate tablet users.
I'm new to Windows 7 and generally loving in it. One problem crops up from time to time. In FireFox 34.0.5 in particular when I restore the, File, Edit, View, History, etc. menu bare I loose the FireFox icon. When switching Windows that Icon helps me identify what program is running in that window. That saves me time. How do I restore it without changing theme I'm using which is the default.
I feel programers have forgotten that there is a reason behind many of the layout convention of Window (and also MAC(s)) and it has to do with the way we read and write and the use of a keyboard.
It's such a small thing I want in here and it's a very important mindset I wish programers had: English, Literate, keyboard.
Thank you
Dave

Hi,
Try entering text or an email address after tapping the reply or new message button, as shown on page 66 of the iPod touch User Guide. http://manuals.info.apple.com/enUS/iPod_touch_3.1_UserGuide.pdf
If the issue persists, try forcing the Mail app to close and relaunching it. This article: http://support.apple.com/kb/TS1445 will walk you through the process.
Also, you can always restore the iPod touch to rule out issues with the software on the iPod. This article: http://support.apple.com/kb/HT1414 will walk you through restoring the iPod touch.
-Jason

Touch screen mouse

Similar Messages

Maybe you are looking for