Touch Screen Or Software Problum

I have had my iPhone for 2 weeks and have had no issues.... until last night.
When its in stand by i hit the button and i slide to unlock - 50% of the time i get a black screen with no icons or i get the icons but when i touch the screen i get nothing. Then it goes back to stand by i do it again and it seems to be ok.
any ideas??
any help will do!!
brad

Your settings (including any saved notes in the Notes application) will be put back on the phone from the last time you synced. All your media files (music, photos) and bookmarks will be re-synced to the phone.
You will need to re-enter WiFi network passwords, your voicemail password, and email account passwords.
If you have any photos in the Camera Roll, be sure to download those to your computer before restoring. The Camera Roll is cleared out during a restore and is not otherwise backed up.

Similar Messages

Magnification Software for Touch Screen POS softwares

Hi,
I am legally blind and trying to open a Jimmy Johns restaurant. I have ran into some problems due to the POS systems that PDQ signature Systems uses. They utilize POSReady and have notified me
that there are no options for magnification software. I am looking for a magnification software that would be similar to
that of what is used on Windows 7 & 8. I do have a link that shows that there are accessibility options for the blind with POSReady.
Can anybody provide details of magnification software that could be used for a touch screen POSReady system?
Thank you.

The accessibility options in POSReady 7 are the same as those in Windows 7. It is up to the manufacture to install these features.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

I have an issue with my iphone touch screen not responding, apple replaced phone and still having same issue. They say its software, what can I do I need my phone to work

Touch screen on Iphone slowly, over a few days stopped responding. Went to Genius Bar and was given a new 3GS because they didn't know how to fix the issue. Cool. Went home synced with Macbook Pro (new-12/2010), two days later same issue. This time when I went to Genius Bar they restored the phone to factory settings and instructed me to load as a new phone in Itunes instead of restoring information of the previous phone, which is an option good for when your replacing phone not fixing one Anywho, did everything they told me to do. SAME ISSUE A FEW DAYS LATER. This time I was told the software issue is with my Macbook and I thought this made sense, so I took it in along with the phone. That was yesterday. Phone working intermittently since leaving Apple. I was given instructions that if their "daily" fix didn't work to erase hard-drive and reinstall software that came with the macbook and start fresh. This would definately fix the issue. Extreme yes, but I need use of my phone, especially since we got rid of the house phone and all use cell phones. So last night I did the required erase of hard-drive and re-loaded all software that came with it and Microsoft Office for Mac. Plugged in the phone to set up in itunes and thought that was it. My phone is still not working. Can't answer when I try, can't make calls, etc. What the heck do I do? I'm starting to feel like a major lamo having to keep going back to Genius Bar, but I know enough to know these issues should have been resolved with the steps I've taken. I even went as far as to restore through my husbands computer and same thing. Could there be a problem with Itunes? Could the magnetic stripe in my debit card be hurting the device somehow, although that's a long shot since I have had the same or similar case since getting the phone. Frustrated beyond belief. Apple support not open at this hour so I'm trying my luck here.....
Thanks for any input.

restore iPhone as new and start again

My Ipod touch screen will not come up unless I conect it to the computer. It never gets past the apple logo and never fully retores? My screen is crackd a little at the bottom. Is this a screen or software problem?

My ipod touch 4will not respond unless I hook it up to the computer. It never goes pasthe logo apple screen.It never restores fully. Cant tell if this is a screen or software problem.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 if a 64 GB one and $99 for the other 4G iPods. They do not fix yours.
Apple - iPod Repair price

Touch Screen software setup

Hi All,
We are trailling a couple of these touch screens within the company as a alternative computer and as a corporate environment we need to re-image the computers wth an enterprise version of the Vista x64 O/S. We can then create a standard image for use across multiple installations. I have managed to create an image but for some reason the TouchCreen software is not loading at all on the computer. I checked the setup and it all appears to be in please but the SmartCentre icon fails to do anything. I had to reverse engineer the installations as there was no support software from the website. What was provided was an upgrade to the existing installed software which is a bit pointless if you are starting from a clean standard O/S installation.
Is there a configuration file or some other control file that the software is looking for as I am at a loss?

do you have Windows Aero enabled?
"A riot is the language of the unheard." - Dr. Martin Luther King Jr.

TS1702 Triple clicking on touch screen. I need to triple click (rather than 1 click) for all functions on the touch screen. I have rebooted and upgraded software. Any help please!?

With the Ipod touch it requires 3 x clicking to the touch screen rather than 1 for all interactions. I have updated software, all apps, rebooted and reset but still doing it. Any suggestions very welcome.

All good - as per "Single click on touch screen doesn't work" problem. The VoiceOver under Settings/general/accessibility was set to "on".
When you turn this off, the ipod resorts to one touch instantly.

HT4528 I am having trouble with the touch screen. When I press - on the glass surface sometimes it doesn't respond back. I updated my software.

I am having trouble with the touch screen. When I press - on the glass surface sometimes it doesn't respond back. I updated my software.

This Apple doc might help ya out -> iPhone, iPad, iPod touch: Troubleshooting touchscreen response

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

IakovM,
See below for a few links.
You should ask the people at Troll Touch if the have a software to create a user interface.
Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
I know that PQLabs as a SDK for their touch screens.
With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
A finger is a much bigger pointer than a mouse pointer!
So links or buttons that are too small or to close to screen edges will be hard to click.
You can look at these for possible solutions:
TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
http://www.tuio.org/
http://kivy.org/#home
http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html

HT4623 Can an ipod 4g touch screen, have the ios 7 software?

Can an ipod 4g touch screen, have the ios 7 software?

As Apple said in June, iOS 7 is not compatible with the 4G iPod.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

HP 8620 Touch Screen Unresponsive - Firmware Software Bug?

Hello, I have the latest "firmware update" on the HP 8620. Can someone please confirm this bug? I don't know if it is just for the HP 8620 or if it applies to all HP touchscreens. Basically if you go into any setting option, then hit the "home" icon and right after you swipe either left or right, it ends up rendering your touch screen unresponsive to swiping left or right. Is this bug already a known issue? The only way to correct the touchscreen so it is responsive again is hit the question mark, or an icon on the bottom and hit the home button (without swiping left/right right after the home button).

Hi , Welcome to the HP Support Forums! I see that you're experiencing issues with your touchscreen on your HP Officejet Pro 8620 e-All-in-One Printer. I will certainly do my best to help you. Please confirm you have the latest Firmware Version: FDP1CN1502AR. If you do not, please go to HP's download page by clicking here. As far as I know, this is not a known issue with the printer or with the printer's Firmware Update. This could be a glitch in the touchscreen, which a Reset should resolve. Let's start by performing a Hard Reset.Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.Then reconnect the power cable to the printer and wall outlet rather than a surge protector.This ensures the printer is receiving full power and may help this situation.Make sure the printer is connected directly to a wall outlet. (don't use a power bar or a surge protector) This ensures the printer is receiving full power and may help this situation.If you're still experiencing issues, we may need to perform a Semi-Full Reset. I can send you that information in a private message. In the forum beside your handle name just click on the envelope to view it. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

Has software update nuked touch screen on my ipod touch 2G?

Hi,
I've noticed that my touch screen input on my iPod Touch 2G is almost unusable. There is a delay / lag between me touching the screen and the device responding to the input, sometimes it gets it wrong. e.g. When I'm unlocking it - it gets the numbers wrong.
I don't think I have damaged the device (e.g. water damage, etc) - but I do remember upgrading to the latest iOS, and it does seem like an OS issue - has anyone had a similar finding?
Thanks,
Prashant.

Try to Reset your device:
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).
If this doesn't help, try a Restore.

HELP: iPhone 6 Keyboard/Touch Screen Not Working

Hello.
I recently acquired to an iPhone 6, which has been working properly for the last two weeks. Today, my keyboard/touch screen stopped working properly. When I am typing in iMessage, or trying to compose an email, enter a URL, or anything else that requires my touch keyboard, my "123" button that switches to numbers, punctuation, and special characters does not open. I updated my software to iOS 8.3., which switched to a new and "improved" emoji keyboard, but I did this after my keyboard had already become unresponsive. If I click on the emjoi keyboard icon to switch over, the "ABC" button to swtich back to QWERTY is unresponsive. This is REALLY frustrating! The phone is two weeks old, and I cannot use to for a huge chunk of functionality.
It's not a dead spot on the touch screen. When I am not trying to access the keyboard, that little bottom left corner works fine to open/use my Phone app.
I really don't want to reset my phone. Any other ideas?
I made a Genius Bar appointment for next Wednesday 4/15, but that seems like an eternity from now.
Please help!

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the Touch Screen . If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

HP Spectre 13 touch screen malfunction

The touchscreen on my Ultrabook malfunctions in a seemingly random fashion.
It appears to randomly and independently trigger the touchscreen in a clearly visible vertical line about two thirds of the way across the screen.
The screen reacts as if it has been touched with a finger - but it has not.
Because these 'ghost' touches are so rapid, it completely trashes whatever I am trying to do at the time as the cursor moves to these random locations and it triggers the opening of mutliple additional webpages, changes to font sizes and screen resolution and prevents me from useing the mouse to try and close down webpages etc. The touchscreen malfunction is visible in all applications.
The only way to stop it is to press the power button until the laptop switches off.
I am not aware of a definite trigger, although at times I may have been trying to click on something with the mouse in the area where this 'flaw' appears to be located.
When I first got the laptop I thought it was some really grim virus and spent ages running and re-running scans,until I made the connection with the touch screen.
Then I wondered if it was something to do with particles or dust and spent ages cleaning the screen - but it happens when there is no visible contamination on the screen at all.
Has anyone else experience this?

Hi @Abby501
Welcome to the HP Support Forums!
I understand that you are having some trouble with your touchscreen. I am happy to assist.
It is hard to know, as yet, what the actual problem is: sensitivity, drivers, hardware, other software, etc. Please post the full product number. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
For now, you can see if you can try to adjust the touchscreen settings and see if it helps:
Press the Windows key which brings up the Start Screen
type "touch screen"
Click Settings
Select "Calibrate the screen for pen or touch input"
Select and configure as desired
Let me know if that helped.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Yoga 2 Pro Touch screen not working

I've had no problems with my yoga 2 pro for over a month, but last night I decided to do windows updates. This is the model with the i7, and 8gb of ram. I let it update and then restarted it. After it started up, I tried to swipe the cover screen up, but nothing was happening. I then decided to use the mouse, and soon realized that the touch screen was unresponsive. I've tried to restore the computer to before the updates, but it hasn't fixed the problem. I can still switch to tablet and stand mode, etc. and the screen will rotate, but I can not get the touch screen to respond to anything. I tried to install some drivers, but none of them are for the touch screen as far as I know, and nothing else seems to work. Does anyone know a fix, or maybe know of a driver I need to install?

Hey mgollery,
Sorry that you are having this issue. Do you know what might have caused this at least? Did you plug in any USB devices recently or does the touchscreen disable after you plug it in? Did you install any programs recently? Do you have the most updated drivers? Do you leave it on long enough for it to go into sleep mode?
Btw, you should check out this other thread here:
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-touchscreen-not-working/td-p/902131/...
Some people got it working by uninstalling recently installed software, updating video card drivers, and others have just had to get it replaced.
If none of the uninstalls, updates, drivers stuff works, I would do the following (like the others have said in this list), but please be careful (stuff might break):
- Do a system restore (to a point where it worked before)
- If that doesn't work, do a windows refresh
- If that doesn't work, I'd call Lenovo and see what tech support can do to help. They will try to update stuff for you and if that doesn't work, they will literally try to reset your computer basically to factory settings (Lenovo actually has their own program that tries to reset stuff)
- If that doesn't work, and you can't live without a touchscreen, I'd call up Lenovo or if you are still on the phone with them, get them to replace it. They handle all the shipping and while it sucks to not have it for a couple of weeks, you at least get the computer you paid for.
Ultimately, what happened to me was that none of the little tricks worked. System restore didn't work. Windows refresh didn't work. Then I called them and they basically told me to do the same things. This time though, during the refresh, some bug happened where it screwed up the refresh so I couldn't even start Windows anymore and it bricked my computer. Then they even had me go through the Lenovo refresh thingy which didn't work. At the end, I ended up shipping it back to them to fix and I think they basically just gave me a new Yoga 2 Pro. The whole process sucked, but at least now my touchscreen works and I never plug my fitbit into the USB port anymore.
Hope that helps.

Touch screen on tablet not working - Vista driver issue (self-inflicted)

I recently tried to update some drivers on my HP tx1220us tablet computer using some 3rd party software. Long story short, I messed up the driver to the tablet touch screen. When I try to Calibrate , it says tablet hardware not found. I know it's not a hardware issue because the pc dual-boots and the other O/S side (Win7) works fine. Which driver is the Vista driver for the digitizer hardware? Thanks for any help.
Mike L

Did you try installing the Touch Driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&product=3752245&lang=en
Driver
Date
Version
Previous
Size
» NextWindow Multi-Touch Device Driver Update
11-2009
1.3.0.2
2.83M

Touch Screen Or Software Problum

Similar Messages

Maybe you are looking for