Tp configuration not completely distributed
Hey guys,
In the post installation part of the solution manager 7.0 EHP 1. i am getting the following message in the TMS configuration...
"tp configuration not completely distributed
Message no. XT452"
OS = windows NT
DB = MSSQL
on running the tp tool check i got the following
RFC DESTINATION -
> RFC PIN ="timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup "
i tried checking RFC for TCP/IP connections CALLTP_WINDOWSNT
following is the log
logon cancel
Error Details timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host arjuna.unisoft.com / sapgw09
Error Details DETAIL: no connect of TP E:\usr\sap\USM\DVEBMGS09\exe\tp.EXE from host arjuna
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 157
Error Details MODULE: gwr3cpic.c
Error Details LINE: 6282
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Thu Aug 12 18:09:20 2010
Error Details VERSION: 2
this is the systems gateway trace...
ERROR => GwISearchPartner: timeout, partner LU: >arjuna<, TP: >E:\usr\sap\USM\DVEBMGS09\exe\tp.EXE< [gwr3cpic.c 6239]
ERROR => GwISearchPartner: HOST: arjuna, conv ID: 18550859 [gwr3cpic.c 6252]
so what do i do now ??
Dear All,
we encounter the same error related to an installation of a BusinessObject XI R2. A connection between the BO server and a BI (NW2004s) has been established successfully. The error occurs during the import of a query in Crystal Reports.
Thanks a lot for any helpful comment.
BR
RB
Similar Messages
-
CATM transaction_System error: quantity not completely distributed
Hello,
When i execute the transcation CATM(entering of time), system was displaying the error in SM12/SM13 as "System error: quantity not completely distributed".
but when i checked the accounts and the cost were transferred. so shall i repeat the transcation CATM again any?
Question: while doing CATM transcation, why the error is displaying??
Please be noted that i referred note 100690.
Service PO is cretaed for 1 PC and service enetry sheet is created.
The goods issue quantity (EKET-WAMNG) at schedule line level deviates from the quantity of goods received actually posted (according to the PO history).
EKBE-quantity - 1PC
EKET-WAMNG- 0 PC
Process: MM and HR module was linked in the business process.
In a Purcahse order , personnel number(HR module) need to maintain for our vendor. then service PO is cretaed and service enetry sheet is careted.
Regards,
Pabbati ObulesuHi Pabbati Obulesu
Have you already run the relevant correction report from note 100690? Was there any change to the table entries?
Also check the consistency between the GR postings and the status of the SES. -
Safe Boot , Serial ATAPI Initial device configuration did not complete successfully.2
clean install OS Snow Leopard and up to 10.6.8.
I install Mavericks & restart computer,
it goes to white screen with Apple Logo and spinny thing at bottom, then after about 2 minutes the Apple Logo changes to a grey No Entry sign.
Now I use safe boot, the message is
" Serial ATAPI Initial device configuration did not complete successfully.(failedCommandInfo = 0x1)
Still waitting for root device"
I can use Snow Leopard DVD startup & chooen 10.6.8 (Macintosh HD) start Disk.
What happen to intall Mavericks of my case? Please HELP! THANKS!
Mac Pro, Mac OS X (10.6.8)If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
Can not commit distributed transaction
Hi
We get error "can not commit distributed transaction" during
commit the transaction in which we have create NEW entities.
Update-transactions on existing enitites work correct.
Our problem is probably due to seauences for object IDs: we are using oracle native sequences:
<sequence name="SeqErrRecObj" strategy="nontransactional" factory-class="native(Sequence=BUYING.SEQ_ERRRECOBJ)"/>
As soon we use strategy="nontransactional" in managed environment,
we get "can not commit distributed transaction" error by creating new instance.
Switching to strategy="transactional" seems to eleminate this problem.
I did not found any hint in about this in documentation.
Can some one confirm our assumption that using nontransactional oracle sequences in manageg (WebLogic 9.2) environment
is responsible for "can not commit distributed transaction" error and "strategy=transactional" is the right solution.
Probably we are completely wrong and tehre is some other explanation for this error ?
kind regards
Andre TeshlerHi Andre,
It sounds like you have not configured a non-transactional datasource. See section "4.2.1. Managed and XA DataSources" in the <kodo>/docs/jdo/pdf/manual.pdf. Connection is for the managed datasource and Connection2 for the non-transactional.
David Ezzio -
I am trying to install Solaris 10 on AMD XP processor.
My problem is the installation is not complete. Means, after booting from CD 1 everthing works well, installation program reboots and after rebooting prompts for CD 2. First time it was thorough with CD 2 and in CD 3 after finishing 36% the system hangs. I had to switch of the machine. After rebooting, it prompts for CD 3 again, I say SKIP., then it goes for CD 4 but again it hangs after 55 % of CD 4.
I just don't understand why this happens. I had allocated about 30 GB for solaris partition. I have 1GB RAM.
KiranThanks for letting me know Hkitty .
I don't believe it would be a issue with the PDF, since you can't print from Word either.
You can always restore your computer back to a earlier time when everything was working properly.
System Restore for Windows 7.
Here are a couple more things you can check first, if you like.
Print a configuration page to get the printer's IPv4 address.
Printing a Configuration Report.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Check the port assigned to the printer on the computer.
Go to Start, Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
It should be checked on TCP/IP.
Then click on Configure Port to view the IP address.
If the IP address doesn't match the printer's IPv4, then create a new port with the new IPv4 address.
Close the configure port window.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IP address for the printer.
Make sure the printer is online.
Try printing again.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Error in local message system; message 009999000035 not complete
Hello All.
I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
and SAP_SV_FDB_NOTIF_BC_CREATE.
However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
I have also checked for Product_ID parameter which is not existing.
One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
So, this shows clearly that it is an issue with role/authorization.
Please suggest me !!
Thanks in advance.
Regards,
Satish.Hmm not really. Profiles for the roles are also generated?
Those roles/profiles should be sufficient to create support messages.
Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04? -
I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later." and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."
Hello, constance132.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I could recommend when receiving error -50.
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista: \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7: \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP: \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Jason H. -
Could not complete the save command because there is not enough memory (RAM)
Hi There,
As per subject line we are using Photoshop CC on 3 different computers, got one error frequently on all systems "could not complete the save command because there is not enough memory (RAM)".
System Configuration:
2 Systems have Dual Core processor with 4 GB RAM
& 1 System have Core i3 processor with 8 GB RAM
We tried to solve our end but still not resolve.
Regards,
Pankaj A. Pagare
Cont. No. 9922507601http://forums.adobe.com/community/photoshop
This forum is actually about the Cloud as delivery, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll -
Service/maintenance order type SM01 not completely maintained in plant 1001
Dear All,
Am trying to configure Service Management where there is a scenario in which , when the user creates a Sales order for a installation item say TV or Fridge, automatically Service order has to be generated.
I have checked all the item Category Settings but am getting an error
Service/maintenance order type SM01 not completely maintained in plant 1001
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Can anyone throw some light on this as i know you would have faced this problem.
SatishNothing
-
Outlook 2010 "could not complete the operation" when forwarding email
Hi, I have a user who is experiencing the following error. He is opening an email, clicking Forward, adding some text of his own to the top, and clicking Send. When he does, he gets the following error: "Microsoft Outlook could not complete the operation.
One or more parameter values are not valid." I first had him run the inbox repair tool SCANPST.EXE and it did not help. Then I had him delete his mail profile, create a new one, and re-downloaded the local copy of his mailbox from the Exchange server (he is
running in Cached mode). No change, he is still getting the error. Some searching produced the suggestion to rename the existing OUTCMD.DAT, EXTEND.DAT and FRMCAHE.DAT files to force Outlook to create new ones, but I don't know where those files are located,
and in any case as far as I can see, it may apply only to older versions of Outlook, or an Outlook client configured to use POP3/IMAP and not Exchange as ours is. Any advice?Hi Dan,
Please check whether there are some add-in application on the client end, and disable them to make a test.
How about on other box to create a new profile to make a test?
Regards!
Gavin
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Windows could not complete the installation recovery error message with HP recovery discs
While doing a system recovery on an HP G72-b50US notebook using HP purchased recovery DVD's, the reboot "Welcome" screen always (tried 5 recovery attempts from scratch) generates the error message "Windows could not complete the installation. To install Windows on theis compuiter, restart the installation". any attempt at a reboot, even into safe mode, regenerates this same error message. How does this get fixed to allow completion of the installation process?
I wish I could tell you.
I also used the HP factory recovery disks on an 8200 Elite CMT. I used them once before with no problem.
The second time was a show-stopper. The recovery process would ask for all 4 disks, then the recovery installation would begin, reboot continue on, everything normal.
Then on the last reboot, when the recovery program stated it was configuring windows, it just quit and stated Windows could not complete the installation.
I made sure that I had absolutely nothing connected to the PC except the keyboard, mouse and monitor.
The only thing I can possibly think of was that I installed a Radeon HD 6570 video card which I replaced the Radeon HD 6350 card with. However, both cards are supported in the PC, and I cannot remember if I did the restore with the 6350 the last time or the 6570.
Now, the reason the ISO file will work is because this is a plain and simple Microsoft Windows 7 ISO file--the very same one that you download when you purchase W7 online from the very same download site.
It is not PC-specific and will install on any PC in the world.
A recovery disk is PC-specific, and is a very complicated mish-mash of programs, drivers, operating system, all customized for your specific model PC. Even something like installing a new hard drive or memory can foul up the works.
The downside of using the plain MS disk is the only programs and drivers you can install are the ones found on your notebook's support and driver page.
The upside of using the plain W7 installation, is you normally end up with a better performing PC, free of bloatware and unnecessary running processes.
For someone like me, it is a non-issue, but for others, they may miss some of the included software.
But that is better than having a computer that is of no value with no operating system installed, wouldn't you agree?
Paul -
Could not complete your request because the tile-format module cannot parse the file
Hi Friends,
I have using PS CS6, when i try to open JP2 file it says error message as "could not complete your request because the tile-format module cannot parse the file". But the same JP2 file is opening in PS CS5 version. Anyone guide me to resolve this.
Regards
PasumalaiHi Kelly,
I'm using below configured systems.
And Photoshop is up to date, refer the below information.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2594 MHz
Built-in memory: 3976 MB
Free memory: 2392 MB
Memory available to Photoshop: 3356 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
OpenCL Version:
Driver Version: 9.17.10.2843
Driver Date: 20120821000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 1796 MB
Video Rect Texture Size: 8192
Serial number: 95478172340525566612
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\1187\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 102.5G, 65.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll
AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22
Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22
Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1.3 x001)
Bas Relief 13.0
BMP 13.0
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1.3 x001)
Clouds 13.0.1 (13.0.1.3 x001)
Collada 13.0.1 (13.0.1.3 x001)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1.3 x001)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0.1 (13.0.1.3 x001)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1.3 x001)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1.3 x001)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1.3 x001)
Measurement Core 13.0.1 (13.0.1.3 x001)
Mezzotint 13.0
MMXCore Routines 13.0.1 (13.0.1.3 x001)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1.3 x001)
Neon Glow 13.0
Note Paper 13.0
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1.3 x001)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1.3 x001)
Picture Package Filter 13.0.1 (13.0.1.3 x001)
Pinch 13.0
Pixar 13.0.1 (13.0.1.3 x001)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1.3 x001)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1.3 x001)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1.3 x001)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0.1 (13.0.1.3 x001)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0.1 (13.0.1.3 x001)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1.3 x001)
ZigZag 13.0
Optional and third party plug-ins:
NTSC Colors 13.0.1 (13.0.1.3 x001)
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
Kindly let me know what i do next?
Thanks & Regards,
Pasumalai J. -
JDBC Adapter configuration not initialized
Hi,
I have tested one scenario for WebService to JDBC. Integration engine shows success message.But i got some error in Adapter engine. It shows "JDBC Adapter configuration not initialized".
So, plz anyone give the solution for this problem.
Regards
VijayHi,
1.Check whether the JDBCAdapter is Activated.
2.Check if any firewalls are there frm client side and open
3.Check the password used to connect the Database is correct one.
If all these are fine..do the complete cache refresh once.
Please award marks if found useful.
Thanks
Hamja -
Error - Could not complete the music store request, the store may be busy .
I get the error "Could not complete the music store request, the store may be busy, check your internet connection or try again later." I have uninstalled and reinstalled,Tried on and off with the firewall, tossed the prefs, tried older and latest versions. It used to work but it hasn't worked in the last few days.
Windows XP ProI found the problem to the iTunes Music Store connectivity. When iTunes version 6 is installed, it places a configuration / preferences file in the following location:
"C:\Documents and Settings\<user>\Application Data\Apple Computer\iTunes\iTunes.pref"
This file contains several very large keys:
Preferences:129= (41,826 characters in length)
Music Store= (1,722 Characters in length)
Somewhere in these keys is stored are references to userid's, connections or other TCP/IP / internet connectivity objects that are being used when iTunes is installed. By deleting this file, these old setting appear to be cleared out.
In my case, one or more of the keys in this file appear to have been storing a property from my old dial-up ISP connection that was no longer valid for my new, Comcast cable modem connection.
Once I deleted this file, and re-started iTunes, it was as if I had never run the software before. I bypassed the option for searching for and importing .mp4's from My Music, and Itunes opened correctly, with full access to the music store. My library and playlists were intact and all is well.
Apple should re-write the protion of iTunes codes that stores anything pertaning to an internet connection that may change over time. Alternatively, iTunes should either A) Prompt for this information B) Enable user access to this parameter in a settings dialog C) Access this information dynamically at runtime.
Paul -
hi
is it true that Increasing the size of redo log will avoid
'Check point not complete' message in alert log.
One more thing, Is there any redo generate while taking export.
Version 10g Rel 2
Thanks in advancenot on itself... I'd rather check the physical configuration of your redologs and the point in time when this happens. See, there is a lot of things going out on disk once a checkpoint occurs. With a bit of misconfiguration you'll have one (lets call it) thread write out the information on the same spindle that tries to switch the logfile. That's the point where your "Checkpoint not complete" happens.
Maybe you are looking for
-
Conversion from document to string
I want to perform conversion from document to string for tht purpose i m doing sax parser but in the end i m getting null.The same thing if i do with DOM parser its working fine but some problem with sax parser. I am attaching the code if anyone can
-
I have 20 or so movies in my iTunes movie section - but I have selected to sync only the movies I select in the Apple TV movie section - I have unchecked movies that I had selected before and then synced the Apple TV to iTunes - but some of the movie
-
Problems connecting between ipad and hudl for vide...
Hi, I've managed to video chat to my dad from an ipad to a hudl afew times since setting us both a skype account. I travelled to Turkey last week, and we could not manage to connect ok. My dad from the uk hudl got messages about connecting to a uk nu
-
Basic aperture help? Can anyone help out!?
Iam adventuring into the art of editing photos but having trouble deciding if Aperture is for me. I tried Capture Nx2 but watermarking is a major component ill be using and it doesnt support that. I tried Gimp but it works with X11 and it doesnt seem
-
hi, What are the ways to find out the tables used in the program? regards, kb