Trace Stack Error - Multiple step operation generated errors

When importing a mapping table into Financial Data Management, I received an error code 2147217887 multiple-step operation generated errors. Check each status value. I was exporting a mapping table from our development application into our production application, so I am not sure what caused this error message. Any ideas would be greatly appreciated. Thank you.

I solved this problem.
Oracle Provider for OLE DB 9.x is supporting Unicode.
But I didn't handle Unicode (DBTYPE_WSTR).
I added Unicode handling code in my source, then there was no error.

Similar Messages

Multiple-step operation generated errors.

Server : Oracle 9i release 2
OLE DB : OLE DB Provider 9.0.1.0, 9.2.0.4
In VC++,
When call IRowset::GetData(), It makes an error.
"Multiple-step operation generated errors. Check each status value."
what does it mean? and how can I fix this error?
Thank you.

I solved this problem.
Oracle Provider for OLE DB 9.x is supporting Unicode.
But I didn't handle Unicode (DBTYPE_WSTR).
I added Unicode handling code in my source, then there was no error.

ADO multiple-step error

Based on my earlier post but with less information, how do I best work out the cause of this error when performing an ordinary ADO Recordset.Update operation?
error '80040e21'
Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
The ODBC trace logfile (below) seems to show an error in the SQLBulkOperations call. What does this mean and how can I work it out any further?
Thanks,
Richard
Processid:{EF91 150-974 ENTER SQLBulkOperations
SQLHSTMT 01151C78
SQLSMALLINT 4
Processid:{EF91 150-974 EXIT SQLBulkOperations with return code -1 (SQL_ERROR)
SQLHSTMT 01151C78
SQLSMALLINT 4
Processid:{EF91 150-974 ENTER SQLGetDiagRecW
SQLSMALLINT 3
SQLHANDLE 01151C78
SQLSMALLINT 1
SQLWCHAR * 0x0527DBE8 (NYI)
SQLINTEGER * 0x0527DC0C
SQLWCHAR * 0x0527D7E8 (NYI)
SQLSMALLINT 512
SQLSMALLINT * 0x0527DC10
Processid:{EF91 150-974 EXIT SQLGetDiagRecW with return code 100 (SQL_NO_DATA_FOUND)
SQLSMALLINT 3
SQLHANDLE 01151C78
SQLSMALLINT 1
SQLWCHAR * 0x0527DBE8 (NYI)
SQLINTEGER * 0x0527DC0C
SQLWCHAR * 0x0527D7E8 (NYI)
SQLSMALLINT 512
SQLSMALLINT * 0x0527DC10

error '80040e21'
Multiple-step OLE DB operation generated errors. Check >each OLE DB status value, if available. No work was doneUnfortunatly this error is too easy to repeat with several databases. I have produced this error in adoanywhere using serverside cursor locations. Switching to Client-Side cursor location often stops the error.
It generally happens when I attempt to open 2 or more connections and attempt to modify the same row in each.
HTH,
Mike
www.adoanywhere.com

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Multiple Step Error Caused by SQL Syntax?

Hi All:
I am getting a multiple step error when I do this:
rs.Fields("MyField").Value = MyValue
I finally tracked down the error to being caused by this syntax:
SELECT a.* FROM MyTable a
or
SELECT a.MyField FROM MyTable a
However, this syntax works just fine:
SELECT * FROM MyTable
or
SELECT MyField FROM MyTable
So what's the big deal here?
Note: Both statements work fine in SQL Server; Oracle chokes on the aliased one.
Doug.

Hi Doug,
I am having very similar problem while runnig the following statments:
SELECT DESCRIPTION FROM ITEM, LOCATION WHERE ITEM.LOCATIONID = LOCATION.LOCATIONID "Updatable"
SELECT DESCRIPTION FROM ITEM JOIN LOCATION ON ITEM.LOCATIONID = LOCATION.LOCATIONID " Not updatable"!
if you figure out something pls let me know!
Abdullah Obeid.
Hi All:
I am getting a multiple step error when I do this:
rs.Fields("MyField").Value = MyValue
I finally tracked down the error to being caused by this syntax:
SELECT a.* FROM MyTable a
or
SELECT a.MyField FROM MyTable a
However, this syntax works just fine:
SELECT * FROM MyTable
or
SELECT MyField FROM MyTable
So what's the big deal here?
Note: Both statements work fine in SQL Server; Oracle chokes on the aliased one.
Doug.

How do you trace an error in a formula/function?

I have a very complex formula in one of my cells, and there is an error. The little help box that explains the error doesn't help me, as I still can't find the error? Is there any way to trace the error? I know that Excel has such a function, I was hoping Numbers had one too. It says "The operator '*' expects a number but found "." I have 12 products in my formula, and I can't find an error in the formula or in any cell. I searched the document for "." but it only found some in my comments. Thanks

Copy the formula and paste it here and we'll take a look at it.

How to find trace file error in form

hai all,
i have big problem in my form in apps i open the form one error is ocuured,
i got the trace file and check the error,
PARSE ERROR #82:len=2903 dep=0 uid=173 oct=3 lid=173 tim=4265689973879 err=904 this is the trace file error meassage,
how to find this error in form and also this is occured one select statement,how to find this select statement where can be used in form,
i have one button ,when ever i press the button this error is ocuured,i check this button pl/sql procedure code but in this code not using that sql statement,
if any one know to find the sql statement through trace file.
plz give the replay as soon as possible.
thank's

The newest SQL Developer can converts the trace to readable format too, I'm not shure if you see the sql statement related to the error then.
It seems you get ORA-00904 which says you use an invalid coumn in a dml statement.
Normally such error should pop up in message - do you overwrite the message handling or use exception handling in you form which block this message?
Easiest way to find this is to compile the form against the target database.
If this does not give an error, you should check, if you use dynamic sql statements which are wrong.
If you call database routines from your form, than this could be the errro cause too.

Trace File Errors

Hi - I've been trying to figure out an issue I'm having where I have a report with an attached library I created and at random it seems that the PL/SQL in the library errors out with this error message-
Terminated with error:
REP-1401: 'cf_footnoteformula': Fatal PL/SQL error occurred.
ORA-06508: PL/SQL: could not find program unit being called
Here's my RWSERVLET Trace file error - not sure what's going on here but if anyone has a clue what this might mean and lead me in the right direction, please let me know
[2008/5/8 5:53:17:934] Exception 1401 (): 'cf_footnoteformula': Fatal PL/SQL error occurred.
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.RWExceptionHelper.read(RWExceptionHelper.java:67)
     at oracle.reports.server._ConnectionStub.runJob(_ConnectionStub.java:504)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:290)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1671)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1525)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:366)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)

Hi - I've been trying to figure out an issue I'm having where I have a report with an attached library I created and at random it seems that the PL/SQL in the library errors out with this error message-
Terminated with error:
REP-1401: 'cf_footnoteformula': Fatal PL/SQL error occurred.
ORA-06508: PL/SQL: could not find program unit being called
Here's my RWSERVLET Trace file error - not sure what's going on here but if anyone has a clue what this might mean and lead me in the right direction, please let me know
[2008/5/8 5:53:17:934] Exception 1401 (): 'cf_footnoteformula': Fatal PL/SQL error occurred.
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.RWExceptionHelper.read(RWExceptionHelper.java:67)
     at oracle.reports.server._ConnectionStub.runJob(_ConnectionStub.java:504)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:290)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1671)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1525)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:366)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)

Internal Tag Stack Error

I have a Bible reading app from Olive Tree, I have recently installed a new bible translation and now when I open the app I receive an error - "Internal Tag Stack Error: Tag Stack too deep" The only option given is to press OK but then the error repeats. Any clue what this is or how to avoid this problem?

Try resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release(ignore the slide to power off). If you get the same error again, delete the app from your phone & then reinstall it.

Retention guarantee causing multiple DML operations to fail ?

WARNING: Enabling retention guarantee can cause multiple DML operations to fail. Use with caution.
^^
From the Ora Docs (10.2) Section - Introduction to Automatic Undo Management (Undo Retention) states the above.
This would mean that other DML operations if requiring space in undo, would therefore fail with a ORA-30036 error. Is this correct understanding ?
If so then one way to avoid this ORA error is to have autoextend defined. ??

From the Ora Docs (10.2) Section - Introduction to Automatic Undo Management (Undo Retention) states the above. Is it from
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/undo.htm#sthref1482
>
This would mean that other DML operations if requiring space in undo, would therefore fail with a ORA-30036 error. Is this correct understanding ? Not all DML operations requiring undo space would fail; only those transactions for which there is no space left in undo tablespace would fail. And yes this is one of the possible error messages that one can get.
If so then one way to avoid this ORA error is to have autoextend defined. ??Yes but that is just pushing the brick wall two feet away. Besides, with auto extension turned on and inappropriate undo_retention parameter settings, you will have issues with disk space (if any).

How to use multiple WSDL operations in One BPEL process Recieve Activity ?

Is there anyway to attach multiple WSDL operations with a Single BPEL process ? How ?

Thanks Melvin for your quick respond.
When I create a BPEL process, It asks me to give the XSD as an Input. When I import the XSD it asks me to select an operation not more than one. Let suppose I select addRequest and finish the wizard.
Now what I can see, It create Recieve activity with an Input msg of Add operation. Well what I understand from your statement is that, I remove the recieve activity and put the Pick activity.
Now my question is How to mention the other operations like update and delete ? And how to test them ?? The link provided by you is just tell me what Pick activity can do for me, But its not telling me how to use it ?? and how the give the operation to it. Where should I need to change in the BPEL ???

How do i select multiple steps and move them?

Hi everyone! I'm trying to select multiple steps and move them all into a branch of a condition outcome. Here's the thing, I have almost completed my workflow with several steps for dynamic approval, however, i need to put a condition at the very start of the workflow and it does not seem that there is an easy way to move all of the steps into one branch. I find the workflow explorer really clumsy in this respect. Is it easier to just drag one outcome of the condition, say to the very end of the workflow? It does not seem to work for me though...hmmm...
Thanks and generous points will be awarded!

Funtion Module 'SWD_GET_WORKFLOW_DEFINITION ' gives the structure of the Workflow definition. The informations are stored in following table.
1. SWDSTEXT -> Table which gives WF Steps and descriptions
2. SWDSBINDEF --> Binding information is stored in this table
3. SWDSMNODES -> All nodes information is stored in this table
4. SWDSMLINES -> Workflow lines are stored in this table.
SWDSMLINES and SWDSMNODES are important tables for current requirement. By changing SWDSMLINES the bulk copy and paste can be incorporated. But this is very very risky, better to have a backup of workflow definition before doiing anything.
Any enthuiasts to write code for a unitlity to move multiple steps ?

Multiple PR's generating for same material after MRP

Hi Guru's,
As per my business scenario, i am creating project with WBSE, Activities and BOM.
By using the reference points, i am transferring the BOM to Project, then executing MRP run.
But after MRP run i found that multiple PR's generated for the same Material.
Please find my BOM structure
BOM-->Assembly + raw material
Assembly is consists of
Sub-Assembly+ 2 raw materials
Sub-Assembly consists of
1 Raw Material.
as per this i should have 4 PR's after MRP but system is generating 8 PR's.
Please tell me where i am doing wrong
Regards,
Bhadra

Hi,
I find the reason why it is creating the multiple PR's for the same component.
It is because of the BOM status. Please find the attached scree shots for the BOM structure and BOM status.
As per my requirement the Planned Orders should be created for "BOM" and "Assembly" and 3 PR's should be generated for Components.
Initially i maintained BOM status as "4" for "BOM" due to that system is exploded the BOM twice i.e., for "BOM" and "Assembly" and generated PR's twice and two planned orders for "BOM" and "Assembly" along with their components.
Now to avoid the duplicates PR generation, i have maintained BOM Status as "5" for "BOM"and run MRP.
This time system is generated 3 PR's and 2 Planned Orders.
As per as PR's is concerned there is no issue. Coming to the Planned Orders there is a issue that, the components are not copied into order which is generated against "BOM" (BOM Status-5) and components are copied into order which is created against "Assembly"(BOM tatus-4)
But as per my requirement, the components should copied in both the orders.
So please tell where is the wrong in this..
Regards,
Rao

Single Spool for multiple steps

Hi,
I have a requirement, where in for multiple steps in a job i need single spool.
Single spool is created for multiple steps when i am running the back ground job with my user id. The problem is when running the same job with the batch user id, more than one spool is created. I have checked the settings of the batch id and even marked it as dialog user still more than one spool is getting created.
Pls let me know why this problem is happening.
Thanks,
Raju

Check the user profile (SU01) of your batch user, "output immediately" should be deactivated. Also check the print parameters in the job steps, "new spool request" should be deactivated.
I haven't tried this in a while, but the answer should be somewhere around these settings.
Thomas

Schedule a Job with multiple steps via ABAP Program

Hi Friends,
I want to create a report(Ex: ZREP) that will run another program(Ex: ZPGM) in background. What I need to do is, when I execute the report ZREP it should run the ZPGM automatically in background. This background execution should happen through JOB with multiple steps.
Why i am mentioned steps is, i have 1000 records in ZTABLE and need to execute 100 records each in one step and need to proecess in ZPGM with selection parameters. So in my case my job should create with 10 steps and need to execute in sequential manner.
FYI, In the ZREP selection screen i need to enter the records count/ interval to derive the job steps.
Please guide how to go ahead? Thanks in advance for all the help.
Regards,
Raghu.

Hi Raghu,
You can try the following pieces of code:
Loop at gt_table. "This table contains 100 records previously appended
w_jobname = c_job_emision "Job Name.
 CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = w_jobname
 IMPORTING
 jobcount = w_jobacount
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
* Perform or create T_SELTAB with parameters options
PERFORM Create_seltab_table.
*Call second program.
SUBMIT ZREP WITH SELECTION-TABLE t_seltab AND RETURN.
*Close Job.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = w_jobacount
 jobname = w_jobname
 strtimmed = c_x "Immediate Start
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDLOOP.
Hope this helps.
Regards
Ernesto
PS: Raymond Giuseppi was faster.
Edited by: Ernesto Caballero on Mar 10, 2010 1:57 PM

Trace Stack Error - Multiple step operation generated errors

Similar Messages

Maybe you are looking for