Track Changes

I'm looking at trying to produce a basic track changes report for a document.
I have had a quick look at the track changes section of the scripting user guide, and while i appeart to get all sorts of information about the change but actually using it does appear to be tricky
Simply put is it possible to acces each of the changes in a story and highlight them (dependent on type) as you see in the story editor?
And if so any pointers as to how i go about this

In the tracking bar to the left click on Tracking bubbles. Choose Hide All.
http://support.apple.com/manuals/#pages

Similar Messages

  • Report to track changes to infotypes prior to running the  payroll interfac

    wants a report to track changes to infotypes prior to running the  payroll interface.  The attached report looks like it should work but it returns nothing.  Is there config that turns on "Track Changes": for select infotypes?  If so, can they be activated for key infotypes so this report will run?
    Name, Address, position, etc.
    Not attendance and absence ITs.

    Hi,
    IMG – Personnel Management – Personnel Admin – Tools – Revision – Set up change document:
    This node has three items:
    Infotypes to be logged
    Field Group Definitions
    Field Group Characteristics
    Using these three options you define which infotypes you wish to log, then which fields, then you define which groups of fields are to be saved. Click each link, or see the sections below:
    Infotypes to be logged
    Here you define which PA infotype numbers you require logging. Select New Entries and enter a transaction class (A for Pers Admin, B for recruitment), then enter the infotype number and save.
    Field Group Definition
    When changes are made to a logged infotype, the field contents before and after are recorded. This is the very reason for logging the infotype, but there is an overhead in performance and disk space used so it needs to be given consideration. Typically you will want to record fields that are pay relevant.
    Using the field group definition, you specify which fields you wish to record changes in. When any of the fields in the group are changed, all the fields in the group are saved. You can use an asterisk to log all the fields of the infotype but this is not recommended for space and performance, also there are many fields on an infotype that you will not be using, that will be saved also. Ideally you will pick individual fields of the infotype and enter them like so:
    The field group number is a freely defined number you allocate to the group, it will be used in the next step. For normal use, simply pick any number not already used in that infotype. All fields with the same field group number are recorded in the log, even if they have not changed.
    Click New Entries and enter the infotype number, field group number and field names that you wish to record.
    Field Group Characteristics
    When you have set up the field group numbers, use the field group characteristics to activate the logging of those fields. You can also specify a supplementary field group; this means that the contents of another field group can also be saved at the same time, even though the contents have not changed. In practise it is not used much. Simply select new entries, enter the transaction class, infotype, and in the DocFieldGr enter the number you assigned to the field names that you want to store, then enter L for Long Term Documents (short are not supported)
    The Audit Report
    To access the report showing the logged infotype changes, use the HR report tree available from various menu paths, including:
    Main Menu – Human Resources – Pers Management – Administration – Info System – Reports - Documents – Infotype change – logged changes in infotype data. (RPUAUD00).
    When you run the report, select the infotypes you require, and select and execute.
    Cheers
    Prasanth

  • Reports to track changes on Deliveries and Sales order

    Hi All
    Do you perhaps know of a specific report that could possibly track changes made to a Sales order and delivery at line item level.
    The problem is change log only logs the deletion of the line item but not the actual material number.
    Do we have to enhance existing reports to achieve visibility for deletion of line items.
    Regards
    KC

    Hi Lakshi
    Thank you very much for that feedback the thing is that you can search that on an order per order basis and even when you get to the change log you will not be able to see what material number was deleted.
    That is the problem.
    Has anyone experienced this wher the requirement was to have a report to run so see what changes have been made to orders or deliveries that they could view wholistically.
    Kind Regards
    Kasavan Aboo

  • Is there a way to retain the track changes from a Microsoft Word document when working on a IPAD word processing App?

    I am going on a work trip and want to be able to collaborate with my colleagues, almost all of whom will be using Microsoft Word on Microsoft Windows laptops and I want to draft and collaborate on documents.  The approach we always take to such collaboration is to use the track changes feature in Microsoft Word that shows changes and who made the changes.As best I could tell apples Pages software ignores the notations added by the track changes features and accepts all changes to the document making it difficult to see what changes were made and by whom.
    I would appreciate any suggestions to address this challenge.

    I noted from some similar topics that Pages seems to support track changes but that while it reflects deletions made in Microsoft Word, it does not appear to show them -- is there a way to fix this problem?

  • Track changes showing multiple entries for a single change?

    Hi there .. I'm using Pages '09 v4.1 to edit MS Word '97 documents. I've been using the 'track changes' feature to work on chapters in a book and have done so with no problems so far (about 6 chapters so far in separate files). I went to start the next chapter and noticed that when I make a single change such as highlighting a word and making it italic, the tracking bubbles will show up as individual entries for every letter instead of for a single word. The really annoying thing is that it's not consistent .. some whole-word changes show up as a single entry, while some show as a few entries but don't necessarily correspond to how many letters are in the word being changed. When I try deleting specific tracking bubbles to see which part of the word they correspond to, it varies. For example, if I put the word "similar" in italics on page one, paragraph one, it shows up as 2 entries. When I delete the last entry, "imilar" will go back to standard font, while "s" stays italic until I delete the other entry. It's as though the words in the document are being recognized based on something other than the obvious, and certain letters are being grouped together in the program's brain, while others are separate.
    It's not isolated to italics, btw. If I reformat the entire document to be left-aligned instead of center-aligned, it will show lots of separate tracking bubbles in various places through the document, rather than showing one bubble for my single change.
    I've tried duplicating and saving a new version of the document, as well as creating a new doc and pasting everything into that and saving as a new doc, though I wasn't sure if this would carry over the problem .. It did.
    It's not the end of the world as far as finishing this job, but it's pretty annoying and will be worse for the person who ultimately verifies the changes I've made. Any help is greatly appreciated.

    TekWarrior wrote:
    I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
    The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
    I need to know if this would cause conflicts or not?
    PYRPROD.WORLD =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
        (CONNECT_DATA =
          (SID = pyrp1)
    PYRP1 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
        (CONNECT_DATA =
          (SERVICE_NAME = pyrp1)
    TekWarrior wrote:
    I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
    The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
    I need to know if this would cause conflicts or not?
    PYRPROD.WORLD =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
        (CONNECT_DATA =
          (SID = pyrp1)
    PYRP1 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
        (CONNECT_DATA =
          (SERVICE_NAME = pyrp1)
    It  won't cause any problem.

  • How to track changes made in the ERD in oracle designer

    I want to track all changes made in my ERD in oracle 10g designer. Please suggest how to achieve it.
    use case: An ERD was approved in design phase. Few changes were made by development team and now in Implementation phase I need to track what all changes were made from say 3-Jan-12 to 3-Mar-2012
    Edited by: 909570 on Mar 5, 2012 1:14 PM
    To add here:
    Designer Version is 10.1.2.0.2.
    1. In my project versioning of ER is not being used so ER Version diff is not an option for me.
    2. In Reports, there are options for getting all entities, attributes which are created/modified in a period. But it seems it is not giving me correct results.
    Edited by: 909570 on Mar 5, 2012 1:14 PM

    Since versioning if off, there is no way to track changes.
    You can get a rough overview of possible changes by looking at the audit attributes (date created, date modified) in the properties palette, but that is already mentioned in your point 2.
    Basically, developers should comment what they added/modified.

  • Exporting Track Changes to Word no longer works

    Just like it says in the subject line: It used to be that I could get a Word doc with Track Changes on and comments from my editor, do my own changes/add comments, then export it as a Word doc no problem. Now Pages either refuses to export the document or mangles it when exporting, causing certain changes to be automatically accepted or declined.
    I was hoping that today's iCloud update for iWork would have this little bug fix in it, but no luck. Has anyone else encountered this and does anyone have any suggestions for how to fix it?
    Thanks!

    I think your problem could be a simple one of corrupt preferences. I think Yvan's script removes them, but maybe not. When something that used to work stops doing so, the most likely culprit is corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list.

  • How do you copy and paste track changes material in Pages from one point in a document to another and keep both the old text along with the track changed thus far in the new pasted location?

    Depending on whether track changes is on/paused, Pages thinks the pasted material is either all new and thus highlights it as a big track change or just copies the old material along with the edits as plain text so that I cannot see my track changes. I need to be able to copy and paste in the same document and still be able to see the older text along with the changes to certain sections thus far. Is this possible? I need a step-by-step "talk to me like I'm five" instructional if what I would like can be done.
    Thanks for any help!
    Message was edited by: C.M.W.

    What version of Pages?
    What OS, iOS or OSX?
    Are you sure you have the Table selected and not a cell or just contents?
    Peter

  • How do I change the font color for track changes in pages?

    I am using the "track changes" function to edit a document in pages, and would like to change the edited text from pale yellow green to a color I can actually see.  How do I do this?

    Hello Zoolie,
    That is an easy thing to do. Go to the drop down menu View > Comments and Changes > Author Color and then just select the color that you want and you will be good to go. Take a look at the article below for more information if needed. 
    Pages for Mac 5.0: Add comments and highlight text
    https://support.apple.com/kb/PH15379
    Regards,
    -Norm G. 

  • Unable to email Pages 5.0 doc with track changes

    In Safari, when trying to attach a Pages doc (Pages 5.0 in Mavericks) with track changes in gmail I get an "Attachment failed" error. In Chrome, I'm able to attach and send the file, but the person I've sent it to is unable to open it. Is anyone experiencing anything similar and/or has discovered a fix?
    Thanks!

    No, they get an error when they try to open it, and they do have the same version of Pages. Yes, I did end up having to export it as a temporary solution, and I don't think the track changes stayed. I was wondering if not being able to send Pages files with track changes is a common issue with Pages 5.0. If you try emailing a Pages 5.0 file with track changes, are the recipients able to open it with track changes in Pages?

  • How to track changes when a contact updates contacts address section?

    I'm creating a workflow to create an integration event when a contact updates its contacts address section (number/street, address2, address3 city, state, zip).
    Record Type: Contact
    Trigger Event: When Modified record saved
    Workflow Rule Condition: None
    Action Type: Integration Event
    When I go to configure the workflow action, I don't see the address on the track changes list. How do I specifiy the address section to be tracked when it's modified?
    Thanks

    The best way would be to create a trigger in the database that would update the history table whenever the data was changed. The next best would be to use a stored procedure. I would not try to do this with server side scripting.

  • How to track changes between documents

    We are trying to find ways to track/compare changes between two or more versions of an InDesign document. We need to be able to store these version changes in a master version tracking document. We know InDesign can track text changes in a story but we need to know more than that, like graphic or style changes. Is there a plugin out there that can compare two versions of an InDesign document and list/print out the differences?  Acrobat has this feature but we haven't found this for InDesign. Any suggestions?

    Hello,
    I hesitated to post the plugins because my company is the publisher of one of them.
    You will find them all at:
    http://www.pluginsworld.com/
    Search for BlackLining from EMS, CtrlChanges from Ctrl Publishing and EditMarks BlackLining from Kerntiff Publishing Systems.
    We are responsible for EditMarks.
    As I said we do not track changes to objects.
    All the best.
    P.
    ( I am not connect to pluginsworld in any way )

  • How to track changes to BP address

    Hi,
    We have to create a ABAP report which should display Old and New addresses of a BP i.e. track changes to BP addresses (House No., City, Postal Code etc.). .
    How can I achieve this? Which FMs, BAPis can I use for this purpose.
    Thanks in Advance.
    Vikrant.

    Pl take a look at the Std Report RPUAUD00 used for Infotype Logging. The Report Documnentation details the steps needed to turn the logging for the PA infotypes, which in your case could be 0167,0168,0169 etc..
    ~Suresh

  • How to track changes on Infoprovider?

    Hi Gurus,
    Could you please provide the steps of how to track changes on Infoprovider? I had 4 Infocubes (belonging to the same info area) that contains compressed data - but now when I tried to display the data, all the cube are empty - no data were aechived.
    I would like to track any actions that were made on those cubes.
    Thanks

    thanks Kumar for helping me out here
    I tried RSD_CUBE_LOG_DELE function module - It came out "no logs found in the database"
    I tried tables RSDRDLOGHEADER and RSDDSTATDELE which provide me deletion informations like user name... but since we have partially archived those specific infoproviders in the same period of time where I think eveything was gone from cube, I am not able to related when and who the data that were not archived were deleted from Infocube
    Under manage Infocube --> archiving tab, all the created archiving request are only for certain dates (below 2006). I know that we had data above 2006.
    Kindly provide additional inputs.
    Thanks

  • How to track changes of VBA Code in AO?

    Hi Community,
    is it possible to track changes of VBA code in Excel or AO. Is there any future for that?
    Does anybody have experience with that?
    Thanks
    Andreas

    Hi,
    there exist also no possiblity to get some Infos from the "Microsoft
    Office Alerts?
    Thanks Andreas

  • How to track changes to fields in a Module Pool Program

    Hi Experts,
    I have one requirement to track the changes to some fields used in the Program, The fields for tracking the changes will be maintained in a table T1, this will be changed dynamically. 
    There are many screens in the program and many fields in each screen.
    1. How to do the coding for tracking the changes, the code should track all the changes to the fields maintained in the table T1.
    Thanks in Advance.
    Baburaj

    Hi Baburaj,
    The table logging concept will helpful for this requirement.(Tcode: scu3 --> give  table name --> u can find changes for all fields).
    Make use of concept change documents (auditing purpose used) --> CDHDR,CDPOS tables.
    If you want to track changes to your own program, You need write some API to store the data.
    Regards
    Bhupal Reddy

Maybe you are looking for